Great video man! Definitely subbing cos you're doing a fantastic job of explaining the necessary procedures. I service and maintain my own reels at home so this is invaluable. Small tip I picked up from the RC hobby, if an o-ring or seal has expanded slightly after cleaning, just pop it in the freezer for a few minutes and it will shrink slightly, making reassembly/fitting easier. Keep up the great content!
@geordiematthews526922 күн бұрын
Thanks I serviced mine today. My bearing was stuck so I couldn't remove my main gear. Very helpful cheers from Australia
@smartlords24 күн бұрын
Hello, thanks for this awesome video I would like to know how much drag power this reel got ,and the use of the adjustable knob on the left side
@solunaranglingconfidante41723 күн бұрын
It can go to 15kg
@solunaranglingconfidante41723 күн бұрын
The knob on the left is the line tensioner
@Wakawakawaka54028 күн бұрын
Best reel video ever !
@rickguerrero9094Ай бұрын
Great video thank you
@roland_des8527Ай бұрын
i have an xt 30 and there is free play btw the handle shaft and handle cap. Also on the knob. is there anything to do to fix it?
@solunaranglingconfidante417Ай бұрын
Nothing much can be done unfortunately. Its just how this reel was made.
@roland_des8527Ай бұрын
@@solunaranglingconfidante417 thanks
@barlomiejzareba8772Ай бұрын
Bravo.)) My Stradic 4000 FL is now like new. Today's fishing was like a fairy tale. I added a roller from Gomexus and it's perfect. Greetings from Poland❤
@Adventure_T2 ай бұрын
what grease did you use, i have a 30 xt reel that now has a bit of movement in the shaft, so i think its time for a rebuild. this series has really helped i couldnt find any information anywhere
@solunaranglingconfidante4172 ай бұрын
SKF LGGB 2.0 synthetic grease. Not cheap and you have to buy it in 400g cartridge but compared to other reel grease, its pretty dorn cheap and it smells like coconut and vanilla. Dont eat it. However this grease soft and its only suitable for reel size 6000 and below..
@ozzyhouston25353 ай бұрын
I just bought a 6000PG. Does it have the same quality internals as non-PG export versions that are sold in America? Same Hagane gears, etc.? Thanks.
@solunaranglingconfidante4173 ай бұрын
Yes. They're the same as HG and XG as long as its export version.
@ozzyhouston25352 ай бұрын
Ah, I bought one from a Japanese seller. Because PG not sold in USA. So, what do you think? Hagane gear? Brass? Zinc alloy?@@solunaranglingconfidante417
@solunaranglingconfidante4172 ай бұрын
Well...... Its shimano's hagane alright but every reels hagane are different material and quality. Hagane is just another marketing gibberish by Shimano. But still, the material is good enough for its price range. Same material as saragosa but the reels design is just a touch different from saragosa. If you turn the reel under pressure, you can feel the gear grinding. However, after thousands of fish including quite a number of sailfish/marlin and double digit cobia, the gear on my reel is still running good ( 3kg of drag, sometimes i do 4kg on sailfish, marlin). Utilize the reel within its optimum range (2-3kg drag) and with good maintenance, this one will last pretty well.
@craigwheaton25063 ай бұрын
Good man
@nathangordon57033 ай бұрын
Bro this is exactly what I needed. Thank you so much.
@hafezazmi64884 ай бұрын
Complete video bro..terbaik lah..tqqq 👍👍👍🙏🙏❤️
@hafezazmi64882 ай бұрын
Bro boleh hantar service reel?
@solunaranglingconfidante4172 ай бұрын
Harap maaf bro, saya dah tak buat service mesin.
@vladocamus4 ай бұрын
excellent video! I have the same reel in the same size. I can see on my reel some spool play up and down when drag is tightened. Maybe 1-2 mm. Is it normal? Do u have the samme on your reel?
@solunaranglingconfidante4174 ай бұрын
Its normal to have up down play
@vladocamus4 ай бұрын
@@solunaranglingconfidante417 Thank you very much for the quick reply :)
@bigbamboo9364 ай бұрын
Nice video boss! And because of you I’m buying shares in a grease factory.
@FishUtila4 ай бұрын
thank you very much
@WOLFRENO0075 ай бұрын
About i buy new shimano spheros sw C5000xg 2021 The bail arm its not automatically close if i used the handle or its manual did the modle like that or this issues in the product . Please confirm with me urgently
@solunaranglingconfidante4175 ай бұрын
Hi. For your information, Spheros SW C5000XG and Spheros SWA 5000XG are different reel. Both SW C5000XG and SWA5000XG are not one and the same. For SW C5000XG it has auto bail trip and the SWA5000XG has manual bail trip. Hope this explanation helps.
@WOLFRENO0075 ай бұрын
@solunaranglingconfidante417 brother my reels its Shimano spheros sw 5000xg and its manual bail arm
@LorenzoTheFisherman5 ай бұрын
what a greasy mess bro!! Waaaay too much grease in there!
@solunaranglingconfidante4175 ай бұрын
There are plus and minus of this greasing style. Most of the reels will be abused until who knows when my customers will send them back for servicing, so this much grease will be needed. If the reels are used by recreational anglers who fish maybe once or twice a month and the do good maintenance, then I will use half the grease in this video. However, based on my experience servicing thousands of reels by now, good maintenance rarely happens😂. These much grease, unfortunately, are necessary. One more thing, for countries with 4 season climate, lesser and much thinner grease will serve them reels better.
@fabiomario13235 ай бұрын
The material Rotor??
@solunaranglingconfidante4175 ай бұрын
Polymer composite
@thevernonposse5 ай бұрын
Your English is better than some of my friends in the United States 😅
@jeromenaidoo52416 ай бұрын
Thanks for sharing great job
@gsvoron6 ай бұрын
Thank you so much for this video. The part at 14:20 has saved my sanity !!!!! :P i disassembled the link and i couldnt figure how to place it back !!!!!! Thank you again !!
@blackapple16416 ай бұрын
good work sir🥰
@texasbeast39376 ай бұрын
What would the new 10000 bg be compared to in the old 2016 bg?
@solunaranglingconfidante4176 ай бұрын
Its the same thing with a few parts changes, mainly nuts, screws and spool design
@psmitty81496 ай бұрын
Thank for the video. I have had my 5000 apart 5 times trying to figure out why my anti reverse falls back a quarter turn. I replaced the clutch, sleeve and wire. This does not effect the operation of the reel. It's just one of those things... Any ideas what would cause this, would be appreciated. Thanks
@solunaranglingconfidante4176 ай бұрын
Most of the time this happen when, during reassembling, the anti reverse bearing is not seated properly. Try removing and reseating the ARB again.
@solunaranglingconfidante4176 ай бұрын
Check the video from 42:43 until the end of main body segment
@psmitty81496 ай бұрын
Wow, something that simple! You are the man! Tight lines!
@MoonLight-xk8dh6 ай бұрын
Thank you so much i disasembled and reasembled with your video my reel wasnt working well and now its brand new thanks =)
@TogaHariansyah7 ай бұрын
Beli sparepartx dmna bos
@solunaranglingconfidante4177 ай бұрын
Sparepart biasanya boleh order dengan kedai pancing tempatan dan kebiasaannya shopee ada jual
@TogaHariansyah7 ай бұрын
@@solunaranglingconfidante417 nyari dishopee sparepat bossna sama bullzen ga ad.
@kudalauthebat7 ай бұрын
fyi lvl wind shaft only use one bushing and one retainer not 2 bushing.dont giv misinformation to ppl.
@solunaranglingconfidante4177 ай бұрын
Not misinformation. I did mention maybe
@solunaranglingconfidante4177 ай бұрын
Every production of any brand is different. Some will have some will not. It will be even more confusing when some brands did not provide schematic diagram. When that happen, the next best thing you can get is schematic from another brand which is never the same but then they are usable because they are from same factory. If you've enough reel, you will realize this fact very fast. Also its important to mention that because this reel is the same thing with other brands, people will tend to add some parts and remove some parts, most of the time its the bearing and bushings. If your reel have or not have or replaced or changed, not really a huge problem.
@kudalauthebat7 ай бұрын
okuma komodo,banax camion,seahawk barricade it is the same reel just different brand.the culprit is seahawk barricade rebrand and selling at unreasonable price.i will recommended okuma komodo and banax camion.
@solunaranglingconfidante4177 ай бұрын
Correct. All 3 three reels you mentioned are one and the same reel with a few parts differences here and there. All parts are all interchangeable with each other. Unfortunately replacement parts of all three are becoming increasing difficult to obtain to the point I no longer recommend ppl getting them, unless ppl are willing to treat them as disposable reels. Although these reels are not great reel but for the price they are sold in SEA region, its hard to beat. I would stay away from komodo nowadays, its better to get used tranx.
@pfv34627 ай бұрын
what is the difference in size between the 6000 and 8000 series? Or is just the spool larger? are the parts easy to obtain? thanks for this video
@solunaranglingconfidante4177 ай бұрын
6000 and 8000 are different reel and different size. Both reels parts is not interchangeable with each other. 5000=6000 and 8000=10000=14000. Parts availability in every region is not equal but usually not too hard to obtain compared to other brands.
@pfv34627 ай бұрын
@@solunaranglingconfidante417 Thanks for the good advice!
@thevernonposse7 ай бұрын
I got an add on your video did you get monetized
@solunaranglingconfidante4177 ай бұрын
Just supers and membership. Not eligible for ads for now
@thevernonposse5 ай бұрын
I get adds now on almost every video
@solunaranglingconfidante4175 ай бұрын
Yep. KZread does push ads even though Im not eligible for ads monetization. Its part of the agreement with youtube.
@duypham767 ай бұрын
Did the bg3500 drag originally have the carbon fiber washers?
@solunaranglingconfidante4177 ай бұрын
Yes. Original bg is carbon drag but for JDM bg if Im not mistaken is felt drag
@user-me4xm1fe3j7 ай бұрын
Is the rotor on this machine penn spinfisher vi 5500 made of plastic or is it made of metal?
@solunaranglingconfidante4177 ай бұрын
Metal
@riskurangler7 ай бұрын
when im using the lightest rear drag.. the LL clicker sound feel weird, sounds like the main clicker not seat properly in place... its sound normal when im using more LL(rear) drag.. can you diagnose where the problem? i need use the lightest setting, its okay with that weird clicker sound ?
@solunaranglingconfidante4177 ай бұрын
Its not a problem. This reel have 2 clickers. The spool clicker and LL clicker. If the LL is too light, the LL system might not engage. What you're hearing is spool clicker. Same thing happen when the LL drag is higher than spool drag, the LL system will not engage as well (meaning if you set the spool drag at 1kg but the LL drag is 1.2 kg, then the LL might not engage or it might go on and off).
@riskurangler7 ай бұрын
@@solunaranglingconfidante417 thanks for the respon, i already understand that condition you have explained. but this is different. the sound at level 1 (lightest) is different at lv 2 or 3.. the sound not solid as lv 2 and 3.. its no matter to me im just worried it will affect performance after long use
@riskurangler7 ай бұрын
im testing with heavy spool drag setting in this situation
@solunaranglingconfidante4177 ай бұрын
@@riskurangler understood. Unfortunately LL system was designed as such. Not much can be done. I usually never use lvl 1. I always set at lvl 2 or 3 because lvl 1 is soo light that sometimes it displaced to lvl 2 with a light touch. If you need lighter drag at lvl 2, you can adjust the tension using the key provided with the reel. I always set lvl 2-3 around 0.5-1kg for livebaiting spanish mackerel and billfish. Lvl 1 and lvl 4 I never bother.
@riskurangler7 ай бұрын
@@solunaranglingconfidante417 i'll test mackerel/king tomorrow its my first time using LL.. i hope lv 2 is light enough for 3-4kg mackerel
@fishbastard94477 ай бұрын
This is a great reel. It's a shame Abu didn't keep it in its current lineup. Great video.
@pescadorspinning8 ай бұрын
Thank you so much brother respect from Morocco 🫶🫶🫶
@lyudmilyankov16118 ай бұрын
Аs an idea, the video is great, but I got a headache with this camera that constantly struggles to focus. your movements should be much smoother and in one surface the camera should be able to work normally. It was a pain to watch until the end. Good luck
@solunaranglingconfidante4178 ай бұрын
Understood. Im still struggling with lighting and camera setting. Hopefully in future video everything improves significantly. Thank you for subs. Cheers.
@KnightOfZero1178 ай бұрын
Is the size the same as the 2016 Bg? I saw a video of the 23bg 6000 and it looks smaller than my 16bg 5000
@solunaranglingconfidante4178 ай бұрын
New model 14000 = Old model 5000 New model 18000 = Old model 6500 New model 6000 = Old model 3500
@fadlyfatturohman92938 ай бұрын
Hallo,,, apakah spinnfisher LL recomended??????
@solunaranglingconfidante4178 ай бұрын
I would recommend Spinfisher VI LL but then again I would very much prefer Daiwa Free Swimmer or Shimano Baitrunner/thunnus. But ew Spinfisher VII will be released next year, Shimano baitrunner/thunnus are really old now and Daiwa Free Swimmer is not available globally. Not many choices available in this category.
@fadlyfatturohman92938 ай бұрын
@@solunaranglingconfidante417 I don't know which person you are, but here the Penn Spinfisher LL is on promotion, the price has dropped, compared to the regular/normal Spinfisher.... I'm a little disturbed by the LL model with what looks like a tail.... Back again to the nominal money and the price Rp. 1.2 million... I have doubts about LL technology... is it annoying?
@solunaranglingconfidante4178 ай бұрын
@@fadlyfatturohman9293 Penn LL system is quite a pain to service. Average service centre will have trouble. You can check out my servicing video on VI 6500LL. In my opinion its top 10 hardest to service. I would try to stay away from this one.
@fadlyfatturohman92938 ай бұрын
@@solunaranglingconfidante417 yesterday I saw your video about assembling the Spinfisher LL... yeah, it's very complicated compared to other reels... okay... thanks for the info, it's very valuable... stay healthy, greetings from a hobby
@thevernonposse8 ай бұрын
I really like your videos and the attention to detail you give to a reel service hope everything works out for you man and you can get monatised
@robertweirjr31968 ай бұрын
Upon faking my reel apart down in the main gear there was a wire . I cant find out where it came from And my secondary anti reverse hangs freely and makes a clicking noise when the reel is held horizontal but not when held vertical Ive taken the reel apart twice First time was only the top but the second time i took it apart fully (didnt touch the secondary anti revers because i could clean it while it was on) I dont know where the "spring" went Any help would be apreciated
@solunaranglingconfidante4178 ай бұрын
Check out part 2 of this video. You can the video in my channel. Go to 40 : 00 in the part 2 video
@Daniel-vu4ft8 ай бұрын
usually 2nd hand reels bring one or two less parts. Positive thing about it is that they still work and become lighter.
@gregsmith86869 ай бұрын
i dont know if its just me or not the video speed is 1.5 x i had to go to settings and change my speed to .75 x to play at correct speed (normal)
@solunaranglingconfidante4179 ай бұрын
Yes the video is at 1.5x speed
@gregsmith86869 ай бұрын
well done i lke the way you explain step by step and tips and tricks i especialy like it when you dont have music playing over the top while your are talking excellent thank you GREG
@lentman9 ай бұрын
Anyone else had a handle not sitting flush to the reel when on left side? (4500LL)
@piesaturn62829 ай бұрын
Hi is there a way I can contact you? I want to send you a vid for my reel
@solunaranglingconfidante4179 ай бұрын
Hi. I would prefer that you upload the video on youtube. Provide the link and we'll discuss in the comments
@piesaturn62829 ай бұрын
@@solunaranglingconfidante417 ok no problem
@piesaturn62829 ай бұрын
@@solunaranglingconfidante417 ok so here it is kzread.infoQRdLgbEZ2NE?si=W2Z3d8aMYgxVdYW4 This is a 5000hg spheros and as you can see and hear the handle is very wobbly so im not sure if its like that in all reels or mine is faulty. Also the plastic cover on the knob thats held in by two screws comes with ingraving on the inside “4000xg” which isnt my reel so im not sure if those things are in your reel too
@KamiInValhalla9 ай бұрын
Thanks for the video
@toolbox00019 ай бұрын
I have one of these reels! How to you change the battery??
@solunaranglingconfidante4179 ай бұрын
18:41 how to replace battery
@ShoreJigginginAlbania9 ай бұрын
Great video as always! What are the bearing sizes of daiwa BG3500?
@solunaranglingconfidante4179 ай бұрын
Unfortunately I dont have the information. This video was from the earlier days of my channel. Back then I havent considered providing bearing sizes
@piercel.68459 ай бұрын
Nice, n now we going to have VII since already showcase in ICAST 2023
Пікірлер
Where are the new vids bro
Great video man! Definitely subbing cos you're doing a fantastic job of explaining the necessary procedures. I service and maintain my own reels at home so this is invaluable. Small tip I picked up from the RC hobby, if an o-ring or seal has expanded slightly after cleaning, just pop it in the freezer for a few minutes and it will shrink slightly, making reassembly/fitting easier. Keep up the great content!
Thanks I serviced mine today. My bearing was stuck so I couldn't remove my main gear. Very helpful cheers from Australia
Hello, thanks for this awesome video I would like to know how much drag power this reel got ,and the use of the adjustable knob on the left side
It can go to 15kg
The knob on the left is the line tensioner
Best reel video ever !
Great video thank you
i have an xt 30 and there is free play btw the handle shaft and handle cap. Also on the knob. is there anything to do to fix it?
Nothing much can be done unfortunately. Its just how this reel was made.
@@solunaranglingconfidante417 thanks
Bravo.)) My Stradic 4000 FL is now like new. Today's fishing was like a fairy tale. I added a roller from Gomexus and it's perfect. Greetings from Poland❤
what grease did you use, i have a 30 xt reel that now has a bit of movement in the shaft, so i think its time for a rebuild. this series has really helped i couldnt find any information anywhere
SKF LGGB 2.0 synthetic grease. Not cheap and you have to buy it in 400g cartridge but compared to other reel grease, its pretty dorn cheap and it smells like coconut and vanilla. Dont eat it. However this grease soft and its only suitable for reel size 6000 and below..
I just bought a 6000PG. Does it have the same quality internals as non-PG export versions that are sold in America? Same Hagane gears, etc.? Thanks.
Yes. They're the same as HG and XG as long as its export version.
Ah, I bought one from a Japanese seller. Because PG not sold in USA. So, what do you think? Hagane gear? Brass? Zinc alloy?@@solunaranglingconfidante417
Well...... Its shimano's hagane alright but every reels hagane are different material and quality. Hagane is just another marketing gibberish by Shimano. But still, the material is good enough for its price range. Same material as saragosa but the reels design is just a touch different from saragosa. If you turn the reel under pressure, you can feel the gear grinding. However, after thousands of fish including quite a number of sailfish/marlin and double digit cobia, the gear on my reel is still running good ( 3kg of drag, sometimes i do 4kg on sailfish, marlin). Utilize the reel within its optimum range (2-3kg drag) and with good maintenance, this one will last pretty well.
Good man
Bro this is exactly what I needed. Thank you so much.
Complete video bro..terbaik lah..tqqq 👍👍👍🙏🙏❤️
Bro boleh hantar service reel?
Harap maaf bro, saya dah tak buat service mesin.
excellent video! I have the same reel in the same size. I can see on my reel some spool play up and down when drag is tightened. Maybe 1-2 mm. Is it normal? Do u have the samme on your reel?
Its normal to have up down play
@@solunaranglingconfidante417 Thank you very much for the quick reply :)
Nice video boss! And because of you I’m buying shares in a grease factory.
thank you very much
About i buy new shimano spheros sw C5000xg 2021 The bail arm its not automatically close if i used the handle or its manual did the modle like that or this issues in the product . Please confirm with me urgently
Hi. For your information, Spheros SW C5000XG and Spheros SWA 5000XG are different reel. Both SW C5000XG and SWA5000XG are not one and the same. For SW C5000XG it has auto bail trip and the SWA5000XG has manual bail trip. Hope this explanation helps.
@solunaranglingconfidante417 brother my reels its Shimano spheros sw 5000xg and its manual bail arm
what a greasy mess bro!! Waaaay too much grease in there!
There are plus and minus of this greasing style. Most of the reels will be abused until who knows when my customers will send them back for servicing, so this much grease will be needed. If the reels are used by recreational anglers who fish maybe once or twice a month and the do good maintenance, then I will use half the grease in this video. However, based on my experience servicing thousands of reels by now, good maintenance rarely happens😂. These much grease, unfortunately, are necessary. One more thing, for countries with 4 season climate, lesser and much thinner grease will serve them reels better.
The material Rotor??
Polymer composite
Your English is better than some of my friends in the United States 😅
Thanks for sharing great job
Thank you so much for this video. The part at 14:20 has saved my sanity !!!!! :P i disassembled the link and i couldnt figure how to place it back !!!!!! Thank you again !!
good work sir🥰
What would the new 10000 bg be compared to in the old 2016 bg?
Its the same thing with a few parts changes, mainly nuts, screws and spool design
Thank for the video. I have had my 5000 apart 5 times trying to figure out why my anti reverse falls back a quarter turn. I replaced the clutch, sleeve and wire. This does not effect the operation of the reel. It's just one of those things... Any ideas what would cause this, would be appreciated. Thanks
Most of the time this happen when, during reassembling, the anti reverse bearing is not seated properly. Try removing and reseating the ARB again.
Check the video from 42:43 until the end of main body segment
Wow, something that simple! You are the man! Tight lines!
Thank you so much i disasembled and reasembled with your video my reel wasnt working well and now its brand new thanks =)
Beli sparepartx dmna bos
Sparepart biasanya boleh order dengan kedai pancing tempatan dan kebiasaannya shopee ada jual
@@solunaranglingconfidante417 nyari dishopee sparepat bossna sama bullzen ga ad.
fyi lvl wind shaft only use one bushing and one retainer not 2 bushing.dont giv misinformation to ppl.
Not misinformation. I did mention maybe
Every production of any brand is different. Some will have some will not. It will be even more confusing when some brands did not provide schematic diagram. When that happen, the next best thing you can get is schematic from another brand which is never the same but then they are usable because they are from same factory. If you've enough reel, you will realize this fact very fast. Also its important to mention that because this reel is the same thing with other brands, people will tend to add some parts and remove some parts, most of the time its the bearing and bushings. If your reel have or not have or replaced or changed, not really a huge problem.
okuma komodo,banax camion,seahawk barricade it is the same reel just different brand.the culprit is seahawk barricade rebrand and selling at unreasonable price.i will recommended okuma komodo and banax camion.
Correct. All 3 three reels you mentioned are one and the same reel with a few parts differences here and there. All parts are all interchangeable with each other. Unfortunately replacement parts of all three are becoming increasing difficult to obtain to the point I no longer recommend ppl getting them, unless ppl are willing to treat them as disposable reels. Although these reels are not great reel but for the price they are sold in SEA region, its hard to beat. I would stay away from komodo nowadays, its better to get used tranx.
what is the difference in size between the 6000 and 8000 series? Or is just the spool larger? are the parts easy to obtain? thanks for this video
6000 and 8000 are different reel and different size. Both reels parts is not interchangeable with each other. 5000=6000 and 8000=10000=14000. Parts availability in every region is not equal but usually not too hard to obtain compared to other brands.
@@solunaranglingconfidante417 Thanks for the good advice!
I got an add on your video did you get monetized
Just supers and membership. Not eligible for ads for now
I get adds now on almost every video
Yep. KZread does push ads even though Im not eligible for ads monetization. Its part of the agreement with youtube.
Did the bg3500 drag originally have the carbon fiber washers?
Yes. Original bg is carbon drag but for JDM bg if Im not mistaken is felt drag
Is the rotor on this machine penn spinfisher vi 5500 made of plastic or is it made of metal?
Metal
when im using the lightest rear drag.. the LL clicker sound feel weird, sounds like the main clicker not seat properly in place... its sound normal when im using more LL(rear) drag.. can you diagnose where the problem? i need use the lightest setting, its okay with that weird clicker sound ?
Its not a problem. This reel have 2 clickers. The spool clicker and LL clicker. If the LL is too light, the LL system might not engage. What you're hearing is spool clicker. Same thing happen when the LL drag is higher than spool drag, the LL system will not engage as well (meaning if you set the spool drag at 1kg but the LL drag is 1.2 kg, then the LL might not engage or it might go on and off).
@@solunaranglingconfidante417 thanks for the respon, i already understand that condition you have explained. but this is different. the sound at level 1 (lightest) is different at lv 2 or 3.. the sound not solid as lv 2 and 3.. its no matter to me im just worried it will affect performance after long use
im testing with heavy spool drag setting in this situation
@@riskurangler understood. Unfortunately LL system was designed as such. Not much can be done. I usually never use lvl 1. I always set at lvl 2 or 3 because lvl 1 is soo light that sometimes it displaced to lvl 2 with a light touch. If you need lighter drag at lvl 2, you can adjust the tension using the key provided with the reel. I always set lvl 2-3 around 0.5-1kg for livebaiting spanish mackerel and billfish. Lvl 1 and lvl 4 I never bother.
@@solunaranglingconfidante417 i'll test mackerel/king tomorrow its my first time using LL.. i hope lv 2 is light enough for 3-4kg mackerel
This is a great reel. It's a shame Abu didn't keep it in its current lineup. Great video.
Thank you so much brother respect from Morocco 🫶🫶🫶
Аs an idea, the video is great, but I got a headache with this camera that constantly struggles to focus. your movements should be much smoother and in one surface the camera should be able to work normally. It was a pain to watch until the end. Good luck
Understood. Im still struggling with lighting and camera setting. Hopefully in future video everything improves significantly. Thank you for subs. Cheers.
Is the size the same as the 2016 Bg? I saw a video of the 23bg 6000 and it looks smaller than my 16bg 5000
New model 14000 = Old model 5000 New model 18000 = Old model 6500 New model 6000 = Old model 3500
Hallo,,, apakah spinnfisher LL recomended??????
I would recommend Spinfisher VI LL but then again I would very much prefer Daiwa Free Swimmer or Shimano Baitrunner/thunnus. But ew Spinfisher VII will be released next year, Shimano baitrunner/thunnus are really old now and Daiwa Free Swimmer is not available globally. Not many choices available in this category.
@@solunaranglingconfidante417 I don't know which person you are, but here the Penn Spinfisher LL is on promotion, the price has dropped, compared to the regular/normal Spinfisher.... I'm a little disturbed by the LL model with what looks like a tail.... Back again to the nominal money and the price Rp. 1.2 million... I have doubts about LL technology... is it annoying?
@@fadlyfatturohman9293 Penn LL system is quite a pain to service. Average service centre will have trouble. You can check out my servicing video on VI 6500LL. In my opinion its top 10 hardest to service. I would try to stay away from this one.
@@solunaranglingconfidante417 yesterday I saw your video about assembling the Spinfisher LL... yeah, it's very complicated compared to other reels... okay... thanks for the info, it's very valuable... stay healthy, greetings from a hobby
I really like your videos and the attention to detail you give to a reel service hope everything works out for you man and you can get monatised
Upon faking my reel apart down in the main gear there was a wire . I cant find out where it came from And my secondary anti reverse hangs freely and makes a clicking noise when the reel is held horizontal but not when held vertical Ive taken the reel apart twice First time was only the top but the second time i took it apart fully (didnt touch the secondary anti revers because i could clean it while it was on) I dont know where the "spring" went Any help would be apreciated
Check out part 2 of this video. You can the video in my channel. Go to 40 : 00 in the part 2 video
usually 2nd hand reels bring one or two less parts. Positive thing about it is that they still work and become lighter.
i dont know if its just me or not the video speed is 1.5 x i had to go to settings and change my speed to .75 x to play at correct speed (normal)
Yes the video is at 1.5x speed
well done i lke the way you explain step by step and tips and tricks i especialy like it when you dont have music playing over the top while your are talking excellent thank you GREG
Anyone else had a handle not sitting flush to the reel when on left side? (4500LL)
Hi is there a way I can contact you? I want to send you a vid for my reel
Hi. I would prefer that you upload the video on youtube. Provide the link and we'll discuss in the comments
@@solunaranglingconfidante417 ok no problem
@@solunaranglingconfidante417 ok so here it is kzread.infoQRdLgbEZ2NE?si=W2Z3d8aMYgxVdYW4 This is a 5000hg spheros and as you can see and hear the handle is very wobbly so im not sure if its like that in all reels or mine is faulty. Also the plastic cover on the knob thats held in by two screws comes with ingraving on the inside “4000xg” which isnt my reel so im not sure if those things are in your reel too
Thanks for the video
I have one of these reels! How to you change the battery??
18:41 how to replace battery
Great video as always! What are the bearing sizes of daiwa BG3500?
Unfortunately I dont have the information. This video was from the earlier days of my channel. Back then I havent considered providing bearing sizes
Nice, n now we going to have VII since already showcase in ICAST 2023