What program do you use to plan your robot before you build it? At 0:38.
@StratfordRobotics2929510 күн бұрын
We use Fusion 360 for all our CAD, there is a vex library that we use for all the parts
@pandaboy808214 күн бұрын
Buddy has that tiktok attention span with the subway surfers gameplay 💀💀💀
@StratfordRobotics2929513 күн бұрын
Best way to speedrun a build 🙏
@blamboy2714 күн бұрын
What was that site you used to build the robot online?
@StratfordRobotics2929514 күн бұрын
Fusion 360
@blamboy2713 күн бұрын
@@StratfordRobotics29295 thanks! The robotics club I'm in doesn't start meeting until after school starts, so this'll help us design a robot over the summer.
@lenin824314 күн бұрын
need a tutorial on the spinning fish screen
@Aidan355Z15 күн бұрын
W build
@dimitrimannigel16 күн бұрын
Is this Stratford Wi?
@StratfordRobotics2929514 күн бұрын
ON
@dimitrimannigel11 күн бұрын
@@StratfordRobotics29295 oh, thanks!
@theredstormer807818 күн бұрын
Y'all need some tinsnips cutting lexan with scissors like that. Vex kids these days smh
@StratfordRobotics2929518 күн бұрын
tin snips cut worse 😴
@laurenz982220 күн бұрын
where did you get the fusion model for the game elements?
@StratfordRobotics2929520 күн бұрын
We made our own cad for the game elements as the manual was not yet released. Full field and game elements CAD is now on www.vexrobotics.com/v5/competition/vrc-current-game
@voidrunner640924 күн бұрын
Very very late but please tell me how you got that fish on your brain 😭🙏
@xakaoix105424 күн бұрын
what do you guys use to design the robot online?
@sunnyd478924 күн бұрын
Fusion 360
@paytonwhite249125 күн бұрын
Geometry Dash is cool.
@zekersqueekers9 күн бұрын
I agree
@zforme911426 күн бұрын
you guys are very early we haven't even started yet
@user-lc9rx7kb6f26 күн бұрын
What was the program you used to prototype?
@StratfordRobotics2929526 күн бұрын
fusion 360
@user-lc9rx7kb6f26 күн бұрын
Thx
@tnarg956126 күн бұрын
2:06 who is bro playing
@StratfordRobotics2929526 күн бұрын
piper 🔥
@oliviarose91227 күн бұрын
Wow you guys work fast 😮
@user-yf7yn7iw5i27 күн бұрын
Please answer instructions to make drive train
@sunnyd478927 күн бұрын
drivetrain is 360rpm going 36t (driving) to 60t (driven) on 6 600rpm motors. Driven gears are screwjointed for better friction
@Therian_pagan-angil28 күн бұрын
CAsually a spinning fish on the brain
@MildlyInsane28 күн бұрын
How is coding in PROS? I'm considering switching, should I?
@StratfordRobotics2929528 күн бұрын
pros good 👍
@Uploaded_Period28 күн бұрын
Yall are such a good team and super funny
@charliemay195329 күн бұрын
W break for showdown
@NotCozmic29 күн бұрын
Hey man could you tell me what software you used that showed a 3D model of your robot?
@muhammadshehadeh846529 күн бұрын
Lmk when you find out! 5:25
@StratfordRobotics2929529 күн бұрын
We use fusion 360 with the vex cad extension for our cad models. Link to installation instructions and tutorial: kzread.info/dash/bejne/oamMqK2GZpuzd84.htmlsi=Vh_ODynYzmEUtmu8
@WifiThingАй бұрын
And they banned attaching to the mobile goal 💀
@minlu8309Ай бұрын
the drivetrain issue is so accurate
@minlu8309Ай бұрын
the polycarb noise is accurate too
@REPShadow12548Ай бұрын
Is it OK if we use your intake design. I like it and my team(me and 2 others) are trying to make the starting sketches. It seems to work really well. Also i'm replacing your mogul mech with a claw instead of pneumatics. This was a great video, and i want to see more like this. Already subbed.
@HuskyLol00Ай бұрын
Dang that was fast 😂
@cooperlittle3Ай бұрын
First Robot??
@StratfordRobotics29295Ай бұрын
first robot :)
@vener_aАй бұрын
bro is playing pokemon showdown (us 💀)
@ElliotHughes2010Ай бұрын
Love the fact your doing robot builds without the field yet
@cfsjedi8180Ай бұрын
Bro i love little will. Hes the best
@StratfordRobotics29295Ай бұрын
so real
@62629WАй бұрын
very bobor
@jdmlegends1346Ай бұрын
What app do you guys use to model the robot. I cant find it.
@sunnyd4789Ай бұрын
Fusion 360
@jdmlegends1346Ай бұрын
@@sunnyd4789 ty!
@derf_8829cАй бұрын
Is that a catalyst sticker i see 🙈
@StratfordRobotics29295Ай бұрын
🥰
@rebelteacher2761Ай бұрын
Looks great but aren’t the goals made of pvc? If so, do you think you’ll be able to grab the pvc like you do the metal?
@StratfordRobotics29295Ай бұрын
there are divots in the bottom of the mobile goals that allow them to be easily grabbed. you could take a look at tipping point bots for some good examples
@Memeking74-gy5keАй бұрын
Please get some sleep but know you guys get to sleep for week or 2 until people ketch up
@LukieBoi3043Ай бұрын
Aren’t you going to need some sort of pusher to actually get the rings on the goal?
@StratfordRobotics29295Ай бұрын
This was built before the manual was released and we didn't have a goal to test on. A simple banded hood or some sort of pusher would be able to score onto the goals with this design however we will likely move away from it
@mohitreddy8082Ай бұрын
good shit dawg
@ethankrichavsky9069Ай бұрын
Be why do you still have a spin Up field setup
@StratfordRobotics29295Ай бұрын
we were building auto aiming spinup bots 😭
@totallynotagecko3866Ай бұрын
Bro why, I’m still catching up on schoolwork from worlds
@MildlyInsane28 күн бұрын
Ditto
@LukeKoppin28 күн бұрын
i have two days to finish an eight paragraph essay i haven't started yet
@totallynotagecko386628 күн бұрын
@@LukeKoppin I have an assignment due last week that I haven’t started bc I was studying for calculus, and I shit the bed on that test
@OnescrewandacoupleofziptiesАй бұрын
This is good but the new goals have a rubber piece at the top so just setting the ring on the top probably won't be enough to get it on the stake
@StratfordRobotics29295Ай бұрын
The solution to this is having a banded hood that helps push them down or some sort of pusher. I think meta will definitely go a different direction towards lifts because this type of bot is limited
@cheezballz8146Ай бұрын
@@StratfordRobotics29295 Yall are still chads for building a bot in literally a day for this when you dont even have the game manual or the field.
@OnescrewandacoupleofziptiesАй бұрын
@@StratfordRobotics29295 I do think that the meta will change but if teams still use an intake, I think that the hood would have to have a smaller piece of an intake that pushes the rings onto the goal because if there is no extra intake, then the ring would get stuck between the hood, intake, and goal.
@m3galegendАй бұрын
Chat it’s been ONE DAY
@smollboi69Ай бұрын
How have you already built robot
@txnnhАй бұрын
dude its been a day
@walkershirley140Ай бұрын
Hey what program r u modelling with?
@StratfordRobotics29295Ай бұрын
We use Fusion 360 for our cads
@IIISSSAAAAAACCCCАй бұрын
hole count time
@bukachooАй бұрын
i think this year we will use dr4b like in the zone
Пікірлер
What program do you use to plan your robot before you build it? At 0:38.
We use Fusion 360 for all our CAD, there is a vex library that we use for all the parts
Buddy has that tiktok attention span with the subway surfers gameplay 💀💀💀
Best way to speedrun a build 🙏
What was that site you used to build the robot online?
Fusion 360
@@StratfordRobotics29295 thanks! The robotics club I'm in doesn't start meeting until after school starts, so this'll help us design a robot over the summer.
need a tutorial on the spinning fish screen
W build
Is this Stratford Wi?
ON
@@StratfordRobotics29295 oh, thanks!
Y'all need some tinsnips cutting lexan with scissors like that. Vex kids these days smh
tin snips cut worse 😴
where did you get the fusion model for the game elements?
We made our own cad for the game elements as the manual was not yet released. Full field and game elements CAD is now on www.vexrobotics.com/v5/competition/vrc-current-game
Very very late but please tell me how you got that fish on your brain 😭🙏
what do you guys use to design the robot online?
Fusion 360
Geometry Dash is cool.
I agree
you guys are very early we haven't even started yet
What was the program you used to prototype?
fusion 360
Thx
2:06 who is bro playing
piper 🔥
Wow you guys work fast 😮
Please answer instructions to make drive train
drivetrain is 360rpm going 36t (driving) to 60t (driven) on 6 600rpm motors. Driven gears are screwjointed for better friction
CAsually a spinning fish on the brain
How is coding in PROS? I'm considering switching, should I?
pros good 👍
Yall are such a good team and super funny
W break for showdown
Hey man could you tell me what software you used that showed a 3D model of your robot?
Lmk when you find out! 5:25
We use fusion 360 with the vex cad extension for our cad models. Link to installation instructions and tutorial: kzread.info/dash/bejne/oamMqK2GZpuzd84.htmlsi=Vh_ODynYzmEUtmu8
And they banned attaching to the mobile goal 💀
the drivetrain issue is so accurate
the polycarb noise is accurate too
Is it OK if we use your intake design. I like it and my team(me and 2 others) are trying to make the starting sketches. It seems to work really well. Also i'm replacing your mogul mech with a claw instead of pneumatics. This was a great video, and i want to see more like this. Already subbed.
Dang that was fast 😂
First Robot??
first robot :)
bro is playing pokemon showdown (us 💀)
Love the fact your doing robot builds without the field yet
Bro i love little will. Hes the best
so real
very bobor
What app do you guys use to model the robot. I cant find it.
Fusion 360
@@sunnyd4789 ty!
Is that a catalyst sticker i see 🙈
🥰
Looks great but aren’t the goals made of pvc? If so, do you think you’ll be able to grab the pvc like you do the metal?
there are divots in the bottom of the mobile goals that allow them to be easily grabbed. you could take a look at tipping point bots for some good examples
Please get some sleep but know you guys get to sleep for week or 2 until people ketch up
Aren’t you going to need some sort of pusher to actually get the rings on the goal?
This was built before the manual was released and we didn't have a goal to test on. A simple banded hood or some sort of pusher would be able to score onto the goals with this design however we will likely move away from it
good shit dawg
Be why do you still have a spin Up field setup
we were building auto aiming spinup bots 😭
Bro why, I’m still catching up on schoolwork from worlds
Ditto
i have two days to finish an eight paragraph essay i haven't started yet
@@LukeKoppin I have an assignment due last week that I haven’t started bc I was studying for calculus, and I shit the bed on that test
This is good but the new goals have a rubber piece at the top so just setting the ring on the top probably won't be enough to get it on the stake
The solution to this is having a banded hood that helps push them down or some sort of pusher. I think meta will definitely go a different direction towards lifts because this type of bot is limited
@@StratfordRobotics29295 Yall are still chads for building a bot in literally a day for this when you dont even have the game manual or the field.
@@StratfordRobotics29295 I do think that the meta will change but if teams still use an intake, I think that the hood would have to have a smaller piece of an intake that pushes the rings onto the goal because if there is no extra intake, then the ring would get stuck between the hood, intake, and goal.
Chat it’s been ONE DAY
How have you already built robot
dude its been a day
Hey what program r u modelling with?
We use Fusion 360 for our cads
hole count time
i think this year we will use dr4b like in the zone
W choice
link please 😁
Link?
@@sunnyd4789 fusion link
where do you go to download the vex cad software
kzread.info/dash/bejne/oamMqK2GZpuzd84.htmlsi=7-cIc94v7XqZAqkA
Bro just building a tipping point bot
tipping point type shit
peak