If ure car is to low to get under , i reckon one of them strong magnets you see on magnet fishing could move the latch over to release it
@bigjak73586 күн бұрын
Just get one of them long magnet strecher things or 1 with a hook your hands are filthy mate
@bigjak73586 күн бұрын
Do nearly all cars use that cable to release the latch???
@cmoneytheman6 күн бұрын
nothing beats rz as far as audio fixing and premiere is one of the best when it comes to working with video editing
@amcrae18 күн бұрын
I would say that if you hear the motor, the next thing to do is to see if the wipers the linkage is disconnected..
@valeriaswurld8 күн бұрын
having issues with my 2012 , i hear the motor running but they don't move any tips?
@amcrae18 күн бұрын
the other possibility is that the wiper arms (which are typically tightened down via nuts) have gotten loose.... but it would be odd for them BOTH to be loose at the same time.
@cunhaos14 күн бұрын
Will this work on a 2006 Jetta?
@amcrae114 күн бұрын
I'm sure it will
@guysingleton961116 күн бұрын
Oh to be skinny enough to fit under there!
@user-zg6tc5gh6w17 күн бұрын
Here we are. Two years later and we are still struggling with this enigma. I replaced the wiper switch because it was broken and could not get the front wipers to work. Thank you very much for wonderful instructive video.
@sub04aru21 күн бұрын
Any update on 7/4/2024? My fathers Forester is showing signs of the same noise but I haven’t gotten around to driving it much. Looking for somewhere to start.
@amcrae121 күн бұрын
It's still noisy but otherwise runs fine! At some point, I would like to get this noise resolved.... I will repost if anything new happens!!!!
@sub04aru21 күн бұрын
@@amcrae1 thanks. I’ll keep researching and will try to remember to come back if it’s something I’m able to fix myself.
@amcrae121 күн бұрын
@@sub04aru It's a DEAL!!!!!
@masonoverbeek175525 күн бұрын
This worked for my 1991 Passat, I watched this grabbed two rods instantly worked you gave no idea how great full I am for this video thank you so much man
@amcrae125 күн бұрын
I am so glad this video is still relevant to people keeping their vintage VWs going!!!
@kyle2beats27 күн бұрын
Mines too low smh
@amcrae127 күн бұрын
Why not lift the car a bit?
@KurtisBraunnАй бұрын
Thank you! Excellent job with the explanation and the visual correlation plus second angle with flashlighted example and good camera angle! Clear as day, well done to both of you.
@amcrae1Ай бұрын
Thanks so much!
@smittys19daytonaАй бұрын
This worked for me once then the next time the cable came loose at the latch but I got it by taking short screw driver and getting in-between the latch and it popped luckily
@amcrae1Ай бұрын
This should work if either end of the cable comes loose!
@valeriesmith3253Ай бұрын
My Lhasa makes the same noise occasionally. I did not connect it, but we lived across the street from a fire station for 5 years. We recently moved and now it is more frequent.
@amcrae1Ай бұрын
We love him! We took him a year ago to England and they saved his life by giving him heart surgery!
@caraa7466Ай бұрын
10 years later and very helpful !! Thanks!!
@amcrae1Ай бұрын
Thanks!! Hope you can keep your "vintage" vw going!
@lukebutterfield576Ай бұрын
Thanks for making the video
@amcrae1Ай бұрын
Thank you!
@sniperpaintcorrection6790Ай бұрын
My speed don’t work, tac doesn’t work kinda tweaks out .. but my temp gauge still goes half way.. would this be the speed sensor?
@amcrae1Ай бұрын
I think it very well could be. The temp guage is quite seperate
@darlinef4802Ай бұрын
Such a talented group of children!!
@michaelhunkins747Ай бұрын
One of the best and informative videos i have watched. Thank you. You are a sage to your trade.
@amcrae1Ай бұрын
Thanks so much!
@iliantonchev9099Ай бұрын
Useful!
@amcrae1Ай бұрын
It's great you're keeping your vw going!
@danschenck9442Ай бұрын
where buy ignitor.?
@amcrae1Ай бұрын
I bought mine from a local lawnmower repair shop
@amcrae1Ай бұрын
Also, you need to get the correct igniter, so take off the old one and see what the numbers are.... then you can google it and buy online.
@roseshayer4608Ай бұрын
Is an 09 similar?
@MrBollocks10Ай бұрын
Thanks. I'm so grateful. I hope this works on my 08 vw Caddy.
@FrankMoyo-ps2jr2 ай бұрын
Hi I have my polo playa the problem is my speedometer is not working and I buy the new one so when I plug it on the car is starting but won't move but when I take it out the switch the vehicle is moving
@amcrae12 ай бұрын
Hi Frank! I don't quite understand what you're sayng!
@ErikEnevoldsen-xd5xe2 ай бұрын
After watching other videos which did not cure the problem. Watched your video and a big thankyou to you as all is sorted
@amcrae12 ай бұрын
Thanks...so glad it helped.
@sniperpaintcorrection67902 ай бұрын
What a nightmare job . I just hooked it up backwards under the hood . I have no heat in the car .. but the car doesn’t over heat anymore or leak antifreeze .
@amcrae12 ай бұрын
I am just wondering if you could find a place to go through the firewall... you could put huge extension hoses and just have the heater core sitting on the floor of the passenger side!!! (maybe with a fan behind it!!!
@ericdelory72542 ай бұрын
Merci mon pote ! Ta vidéo est bien réalisée et l'ambiance est cool, je partage avec les propriétaires de Golf du vieux continent, je te souhaite une belle vie !
@jasonalbietz3702 ай бұрын
Wtf lol thanks
@amcrae12 ай бұрын
Crazy, huh?
@themythrighthere94122 ай бұрын
I am one of those sighing relief 😂 This is much needed info i couldnt find elsewhere!!! Thanks boys 🙏
@amcrae12 ай бұрын
Thanks so much!!!!
@susyvinoszelaya11772 ай бұрын
I ordered the part now if I can get some help someone w tools
@linwoodeaton29072 ай бұрын
"Promo sm"
@jameslaiola49762 ай бұрын
Thank you for your video Sir. Im running into the same problem. My tail lights actually stay on until i disconnected the battery. So i admit. Im stumped
@amcrae12 ай бұрын
Good luck.... it seems to me that you want to work backwards from the lights.....and find out where the voltage is coming from... if worse comes to worse, you could cut the wire and put a toggle switch in.... you'd just have to remember to flip the switch after stopping the car...
@amcrae12 ай бұрын
Maybe a relay is stuck on???????
@jameslaiola49762 ай бұрын
@@amcrae1 thank you so much for the replies. I am definitely going to apply all of these notions. I appreciate it
@wroutone3 ай бұрын
Hi, have you changed the diff bearings and solved the problem? I have got the same, not so noisy, but still hearable.
@amcrae13 ай бұрын
don't know how!!! But would love to learn!
@growingup44873 ай бұрын
if you have this issue on a 5MT it's likely the 4 transmission bearing in the center diff area
@amcrae13 ай бұрын
Thanks. Very interesting!!! I guess you've been there!!!!
@Chris90.3 ай бұрын
where is the windshield wiper motor for this car itself?
@amcrae13 ай бұрын
It must be under the cowling near the windshield, since it moves the wipers!!!!
@Chris90.3 ай бұрын
@@amcrae1 the fastest speed setting for my windshield wipers is the only mode that functions. the intermittent, and other intervals do not. do you think this is an issue with the motor or the relay switch?
@amcrae13 ай бұрын
@@Chris90. Could be either, I'd guess...
@Chris90.3 ай бұрын
@@amcrae1 okay thanks
@lindatshabalala35343 ай бұрын
Thanks for the video , quick question. I know the inlet hose to the heater matrix stems from the head but where does the outlet connect to. Asking because I bought the car with the heater completely closed off so I assume the matrix is damaged. TIA
@amcrae13 ай бұрын
I'll take a look at my 2000 Cabrio for a reference and let you know what i find! I also think i still have the original Bentley manual for this car... hh
@amcrae13 ай бұрын
OK... one hose, as you said, runs to a fitting on the side of the head... the other hose..... goes to a metal line... that crosses in front of the engine and then plunges down near the oil filter to a multiple hose connector off the back of the water pump!!!!
@amcrae13 ай бұрын
doing a new Cabrio video on the immobilizer soon! Please subscribe!
@amcrae13 ай бұрын
and you're welcome!!!
@lindatshabalala35343 ай бұрын
Thank you, much appreciated, looking forward to upcoming videos.
@downtownpaintingservices.793 ай бұрын
You’re out of your mind
@annak_music3 ай бұрын
I remember this🥹. I was in this play btw, and I go to this school. No, I'm not joking. It was so fun.
@petruadrianpatrascu62393 ай бұрын
Thank you man,i wil try on my golf also .🙏
@CL500MBZ3 ай бұрын
Water?? Why??? Brake cleaner spray can remove that dust.
@amcrae13 ай бұрын
Water is very good at removing brake dust! You should try it!
@hannesundjule333 ай бұрын
Top, habt mir viel Ärger und geld erspart.🤘👌✌️
@amcrae13 ай бұрын
Danke!!!!
@federico78593 ай бұрын
I love you… I went crazy to solve it ❤
@amcrae13 ай бұрын
I know! I wanted to start cutting wires!!!!! LOL
@adrianwysocki10863 ай бұрын
Woow this same unit is 210$ NOW!!!😪😪😪
@amcrae13 ай бұрын
Ouch
@Francisco.Ferreira4 ай бұрын
2024 and your video taught me to remove a radio from a vw golf mk4. Thx bro
@amcrae14 ай бұрын
Thanks ! Gotta keep those old vw's going!
@Caza3904 ай бұрын
This doesn't look too hard... but I just got one that is riddled with webs and dead spiders... This is going to be eventful :(
@amcrae14 ай бұрын
Go for it!!!! LOL
@mrbeodk22084 ай бұрын
Thanks, that solved the problem.
@agnosticevolutionist35674 ай бұрын
Check the egr for leaks too this can cause an under boosting
Пікірлер
Brilliant ! 👏🏽👏🏽👏🏽
Thank you!!!
If ure car is to low to get under , i reckon one of them strong magnets you see on magnet fishing could move the latch over to release it
Just get one of them long magnet strecher things or 1 with a hook your hands are filthy mate
Do nearly all cars use that cable to release the latch???
nothing beats rz as far as audio fixing and premiere is one of the best when it comes to working with video editing
I would say that if you hear the motor, the next thing to do is to see if the wipers the linkage is disconnected..
having issues with my 2012 , i hear the motor running but they don't move any tips?
the other possibility is that the wiper arms (which are typically tightened down via nuts) have gotten loose.... but it would be odd for them BOTH to be loose at the same time.
Will this work on a 2006 Jetta?
I'm sure it will
Oh to be skinny enough to fit under there!
Here we are. Two years later and we are still struggling with this enigma. I replaced the wiper switch because it was broken and could not get the front wipers to work. Thank you very much for wonderful instructive video.
Any update on 7/4/2024? My fathers Forester is showing signs of the same noise but I haven’t gotten around to driving it much. Looking for somewhere to start.
It's still noisy but otherwise runs fine! At some point, I would like to get this noise resolved.... I will repost if anything new happens!!!!
@@amcrae1 thanks. I’ll keep researching and will try to remember to come back if it’s something I’m able to fix myself.
@@sub04aru It's a DEAL!!!!!
This worked for my 1991 Passat, I watched this grabbed two rods instantly worked you gave no idea how great full I am for this video thank you so much man
I am so glad this video is still relevant to people keeping their vintage VWs going!!!
Mines too low smh
Why not lift the car a bit?
Thank you! Excellent job with the explanation and the visual correlation plus second angle with flashlighted example and good camera angle! Clear as day, well done to both of you.
Thanks so much!
This worked for me once then the next time the cable came loose at the latch but I got it by taking short screw driver and getting in-between the latch and it popped luckily
This should work if either end of the cable comes loose!
My Lhasa makes the same noise occasionally. I did not connect it, but we lived across the street from a fire station for 5 years. We recently moved and now it is more frequent.
We love him! We took him a year ago to England and they saved his life by giving him heart surgery!
10 years later and very helpful !! Thanks!!
Thanks!! Hope you can keep your "vintage" vw going!
Thanks for making the video
Thank you!
My speed don’t work, tac doesn’t work kinda tweaks out .. but my temp gauge still goes half way.. would this be the speed sensor?
I think it very well could be. The temp guage is quite seperate
Such a talented group of children!!
One of the best and informative videos i have watched. Thank you. You are a sage to your trade.
Thanks so much!
Useful!
It's great you're keeping your vw going!
where buy ignitor.?
I bought mine from a local lawnmower repair shop
Also, you need to get the correct igniter, so take off the old one and see what the numbers are.... then you can google it and buy online.
Is an 09 similar?
Thanks. I'm so grateful. I hope this works on my 08 vw Caddy.
Hi I have my polo playa the problem is my speedometer is not working and I buy the new one so when I plug it on the car is starting but won't move but when I take it out the switch the vehicle is moving
Hi Frank! I don't quite understand what you're sayng!
After watching other videos which did not cure the problem. Watched your video and a big thankyou to you as all is sorted
Thanks...so glad it helped.
What a nightmare job . I just hooked it up backwards under the hood . I have no heat in the car .. but the car doesn’t over heat anymore or leak antifreeze .
I am just wondering if you could find a place to go through the firewall... you could put huge extension hoses and just have the heater core sitting on the floor of the passenger side!!! (maybe with a fan behind it!!!
Merci mon pote ! Ta vidéo est bien réalisée et l'ambiance est cool, je partage avec les propriétaires de Golf du vieux continent, je te souhaite une belle vie !
Wtf lol thanks
Crazy, huh?
I am one of those sighing relief 😂 This is much needed info i couldnt find elsewhere!!! Thanks boys 🙏
Thanks so much!!!!
I ordered the part now if I can get some help someone w tools
"Promo sm"
Thank you for your video Sir. Im running into the same problem. My tail lights actually stay on until i disconnected the battery. So i admit. Im stumped
Good luck.... it seems to me that you want to work backwards from the lights.....and find out where the voltage is coming from... if worse comes to worse, you could cut the wire and put a toggle switch in.... you'd just have to remember to flip the switch after stopping the car...
Maybe a relay is stuck on???????
@@amcrae1 thank you so much for the replies. I am definitely going to apply all of these notions. I appreciate it
Hi, have you changed the diff bearings and solved the problem? I have got the same, not so noisy, but still hearable.
don't know how!!! But would love to learn!
if you have this issue on a 5MT it's likely the 4 transmission bearing in the center diff area
Thanks. Very interesting!!! I guess you've been there!!!!
where is the windshield wiper motor for this car itself?
It must be under the cowling near the windshield, since it moves the wipers!!!!
@@amcrae1 the fastest speed setting for my windshield wipers is the only mode that functions. the intermittent, and other intervals do not. do you think this is an issue with the motor or the relay switch?
@@Chris90. Could be either, I'd guess...
@@amcrae1 okay thanks
Thanks for the video , quick question. I know the inlet hose to the heater matrix stems from the head but where does the outlet connect to. Asking because I bought the car with the heater completely closed off so I assume the matrix is damaged. TIA
I'll take a look at my 2000 Cabrio for a reference and let you know what i find! I also think i still have the original Bentley manual for this car... hh
OK... one hose, as you said, runs to a fitting on the side of the head... the other hose..... goes to a metal line... that crosses in front of the engine and then plunges down near the oil filter to a multiple hose connector off the back of the water pump!!!!
doing a new Cabrio video on the immobilizer soon! Please subscribe!
and you're welcome!!!
Thank you, much appreciated, looking forward to upcoming videos.
You’re out of your mind
I remember this🥹. I was in this play btw, and I go to this school. No, I'm not joking. It was so fun.
Thank you man,i wil try on my golf also .🙏
Water?? Why??? Brake cleaner spray can remove that dust.
Water is very good at removing brake dust! You should try it!
Top, habt mir viel Ärger und geld erspart.🤘👌✌️
Danke!!!!
I love you… I went crazy to solve it ❤
I know! I wanted to start cutting wires!!!!! LOL
Woow this same unit is 210$ NOW!!!😪😪😪
Ouch
2024 and your video taught me to remove a radio from a vw golf mk4. Thx bro
Thanks ! Gotta keep those old vw's going!
This doesn't look too hard... but I just got one that is riddled with webs and dead spiders... This is going to be eventful :(
Go for it!!!! LOL
Thanks, that solved the problem.
Check the egr for leaks too this can cause an under boosting
The 2.0t does not have EGR. Only the tdi does.
Now I can never do this.