Пікірлер

• 
  @skilled114021 сағат бұрын

  Awesome coverage 👍👍

• 
  @i2edeye20 сағат бұрын

  Thank you.

• 
  @Dat_Sun23 сағат бұрын

  Simpler times. I lived in Oak Harbor about 10 years ago. The island is beautiful. Never seen another Datsun in my time there.

• 
  @i2edeye22 сағат бұрын

  I spent my youth living there, owned a couple Datsuns during that time. Was a lot longer than 10 years ago though. :)

• 
  @tongjefferry9414 күн бұрын

  The small pedal is rear axle differential lock

• 
  @i2edeye14 күн бұрын

  Thank you very much.

• 
  @fantomhobo14 күн бұрын

  May have shown up late and missed the peak crowd on Saturday but you still managed to get my subie in the video.

• 
  @i2edeye14 күн бұрын

  Camera came out quick lol

• 
  @fantomhobo14 күн бұрын

  @@i2edeye yeah it did. I think I was only there for like 45 minutes after you showed up

• 
  @edenmolinar208614 күн бұрын

  how much was the part since they don't sell this model anymore in my area I am wondering if I can still get parts for it.

• 
  @i2edeye14 күн бұрын

  It was relatively cheap, like $20 I think. It did take a while to get here from China lol. The parts catalog was extensive and they were helpful on the phone when ordering.

• 
  @bleachgarage21 күн бұрын

  Noice!

• 
  @i2edeye21 күн бұрын

  Thank you sir

• 
  @anthonykerley564621 күн бұрын

  Dude yaaas!! Great score to find! Hope to see you at powerland! 🤙

• 
  @i2edeye21 күн бұрын

  Will be there later today. :)

• 
  @M0NSTERDj22 күн бұрын

  I just did this to my compressor because the old motor pistons blew up and i did everything correctly to install the new one, now it doesn't turns off when the tank is full, any advices? 😢

• 
  @i2edeye22 күн бұрын

  Sounds like the pressure switch went out. You can get new ones on amazon.

• 
  @JamesMcLeod-c3i27 күн бұрын

  I've looked at alot of videos and u have helped me a lot more than all of them together thank u

• 
  @i2edeye27 күн бұрын

  Glad to help

• 
  @jeffryhino827527 күн бұрын

  Take me for a ride!

• 
  @i2edeye27 күн бұрын

  Will be at Powerland can give you a ride and pick up that transmission :D

• 
  @jeffryhino827527 күн бұрын

  @@i2edeye Can you haul an engine back for me?

• 
  @i2edeye27 күн бұрын

  @@jeffryhino8275 Yes, I thought it was a transmission, but that was last year lol

• 
  @toomuchtube28 күн бұрын

  Such cool little cars. I had a 1966 RL411 SSS 4 speed Wagon in the 1970s, it was red. That car was a lot of fun.

• 
  @i2edeye28 күн бұрын

  They are great little cars. :)

• 
  @johnmadsen37Ай бұрын

  Is it worth a trip there? How many hours of trails are there?

• 
  @i2edeyeАй бұрын

  Yes it is. Were would you be headed the from? I have been out there for a full day and not hit all the trails.

• 
  Ай бұрын

  Nice work. Love the xterras. Got a 19 frontier thats been good so far.

• 
  @i2edeyeАй бұрын

  Thank you. My brother has an 09 Frontier that is still going strong.

• 
  @time1800Ай бұрын

  Could you list the level you bought.

• 
  @i2edeyeАй бұрын

  This is the one I used. www.amazon.com/dp/B08ZXSKDTT?psc=1&ref=ppx_yo2ov_dt_b_product_details

• 
  @time1800Ай бұрын

  @@i2edeye Thank you.

• 
  @i2edeyeАй бұрын

  @@time1800 You're welcome.

• 
  @n.b.p.davenport7066Ай бұрын

  It goes in the other direction and use a press

• 
  @i2edeyeАй бұрын

  How does it go in the other direction?

• 
  @stavbersosa2458Ай бұрын

  what does the red check engine light ground switch wire on the chassis connector to gauges go to??? is it to be used as the dummy light for the alternator to charge??

• 
  @i2edeyeАй бұрын

  It goes to the check engine light on the dash in the 240sx. I ran it to a light I bought on amazon that I put in the delete plate on the dash. www.amazon.com/Taiss-Indicator-Engine-Yellow-F-010-FDJ-Y/dp/B097SDGDPY/ref=sr_1_7?crid=2MFQJYISJ1R15&dib=eyJ2IjoiMSJ9.PPSzVAmu-sJ6CeaHe6a8Mz5Wj0doYcz66_yeMVjRCEHy2t6ww6oZnpQhQH7T3KVKjwnl0_6Agvv8Vx1_SbUqQBmr2vWMhLRhIcC-MxPT7Wkt4Qa0256e-0W88MDPJV365Cbhr7d2STdApyxVc1xmzUd8rqoMF53LQ8l-ANI_w6Rn9Mjh2HJ-_lpCihGunnNy9xOR3PcVmLrlAqxHRzYUiYjGn9jh8IiEkGV2uxJNCYz_h9dhR2q2G6OL-AAdejomPGch2mCGN7MTo66lBWiicrq66hlHftryjh0_PY367uw.K1RrSAS6vHQQzHFIu0JFHBa_oN5-KN0hrzYKkoq1G9M&dib_tag=se&keywords=check%2Bengine%2Blight&qid=1718804097&sprefix=check%2Bengi%2Caps%2C174&sr=8-7&th=1

• 
  @stavbersosa2458Ай бұрын

  @@i2edeye awesome thank you very much, wiring my 710 wagon today with a ka24e... also the other red wire, from pin 46 on the ecu, does that get constant 12v?? like it goes straight to the battery with a fuse??

• 
  @stavbersosa2458Ай бұрын

  @@i2edeye okay i got the red wire (pin 46) figured out.. For the orange wire for start signal where does that go on the starter??

• 
  @i2edeyeАй бұрын

  @@stavbersosa2458 Yes it is the ECU back up power or memory.

• 
  @i2edeyeАй бұрын

  @@stavbersosa2458 The orange wire tells the ECU that the starter is spinning, it ties into the start signal wire from the ignition switch to the starter.

• 
  @72drowssapАй бұрын

  I am cracking up. I literally just mated my motor and trans and decided to enjoy this little win by watching some install videos and relax finally. Your video is the first that came up for me! WHAT. A. LOUSY. EXPERIENCE. I have never had such difficulty with other engines before. I can't get over how terrible access is on this vehicle for EVERYTHING!

• 
  @i2edeyeАй бұрын

  They really stuffed this thing in there lol. Totally agree pain in the ass, but well worth it now that it is running and driving great.

• 
  @madnigerianАй бұрын

  Update on engine ?

• 
  @i2edeyeАй бұрын

  Almost 10,000 miles and running great.

• 
  @eviltechracingАй бұрын

  Do you have the dxf files for these?

• 
  @i2edeyeАй бұрын

  I just sell the mounts.

• 
  @bradleyabbott3504Ай бұрын

  I know this is a long shot but would anybody be willing to sell me one of those can am wiring boxes, the guy stopped making them and he said he doesn’t know if or when he’ll start making them again

• 
  @i2edeyeАй бұрын

  Dastin Motorsports had a used one for sale. It is easy enough to wire up to 3 relays, the can/am box just packages them nicely.

• 
  @ngurahagung-gy7muАй бұрын

  Nice and finally you made it, thanks 🙏

• 
  @i2edeyeАй бұрын

  Thanks for the request :)

• 
  @AndrewBaker-xt3dvАй бұрын

  Love this. Getting ready to overhaul mine

• 
  @i2edeyeАй бұрын

  Thank you. I just picked up my dual cam from the machine shop :)

• 
  @maurobeltran30722 ай бұрын

  Im curious to know how these aluminum valve covers held up and if theyre worth the money i take it this video is old enough to warrant a new one by now let me know so i can start ordering gaskets lol

• 
  @i2edeye2 ай бұрын

  So far so good. The only real issue was the cap threads and they are manageable.

• 
  @maurobeltran30722 ай бұрын

  @i2edeye so no leaks? Because from what I've read the plastic ones usually end up leaking

• 
  @i2edeyeАй бұрын

  @@maurobeltran3072 No leaks, just about to hit 10,000 miles

• 
  @stevelawrencejr77232 ай бұрын

  I 1996 hardbody D21 truck that is stock. So after I watch this, if I'm understanding you. I can install a transmission from a 240, 260, 280 Z car? I love my truck and I'm custom building it, but I would love to better highway gears for better MPG, because it's not going to be a work truck anymore......just a show and cruise.

• 
  @i2edeye2 ай бұрын

  Yes you can, but I would recommend a different rear end gear to get that result. I am not sure if the 96 use the H190 still but if it does you have a large range of gearing options. If it is the newer rear you will have even more options.

• 
  @nedsteinke49012 ай бұрын

  Thank you for this video very informative. Maybe you could help me because when I ground my test light it illuminates no matter what, I thought at first I just had the dizzy line up by coincidence but then I twisted it and the light just remained on?

• 
  @i2edeye2 ай бұрын

  Sounds like the circuit is grounded in the distributor. I have had the wire touching the body of the distributor causing this. The isolator where it passes into the dizzy could be broken or the connector at the points could be backwards and touching the points body.

• 
  @henryvargas95612 ай бұрын

  I appreciate you posting this video, it was beyond help trying to identify one of them that I had no clue what was it for or where it goes

• 
  @i2edeye2 ай бұрын

  Glad to help :)

• 
  @FrancisBridles-ko8ne2 ай бұрын

  What rims are those? I have a similar jeep and was looking to get new wheels and tires and those look pretty slick

• 
  @i2edeye2 ай бұрын

  They are an early version of the Appliance Vector also called a Turbine or Hurricane from other manufacturers.

• 
  @i2edeye2 ай бұрын

  I refinish them in another video.

• 
  @tyler-dum-asf2 ай бұрын

  That ecm wiring spread sheet was so beyond useful, thanks a ton for the info, made wiring the swap into a subi GL a breeze. Downloaded this video for reference later lol

• 
  @i2edeye2 ай бұрын

  Glad to help. Love some subi gl :)

• 
  @larryalexander48332 ай бұрын

  Did it fit directly in?

• 
  @i2edeye2 ай бұрын

  Yep. Went right in and locked.

• 
  @Rendon_Glee_Guy2 ай бұрын

  I hear that with Solberg Air Intakes, the compressor sounds more quiet and fills up faster.

• 
  @i2edeye2 ай бұрын

  I will have to look into those.

• 
  @panchopann64742 ай бұрын

  So I’m going thru the same trouble… I got a used assembly from a wreck 2015 q50 and I swap it today, after the swap it worked perfect! Let the car sit for an hour and it was not rolling up again.. took it for a spin and when I got back home it worked again..

• 
  @panchopann64742 ай бұрын

  It works only when it wants to.. it’s annoying

• 
  @i2edeye2 ай бұрын

  @@panchopann6474 that is a bummer that it is still being a pain. Intermittent issues are hard to trouble shoot, but I would start at the connectors at the switch and motor.

• 
  @shampaofficial882 ай бұрын

  Great

• 
  @i2edeye2 ай бұрын

  Thanks

• 
  @elgenerz2 ай бұрын

  That's a sweet tailgate! i.ytimg.com/vi/WUdmAyIcSQU/maxresdefault.jpg

• 
  @elgenerz2 ай бұрын

  This is really cool. I have a 1967 Stout and a 1992 SC400 I'm planning to do a similar restification with, using the SC400 F&R subframes and 1UZ :-) Keep posting videos, I need the encouragement!

• 
  @i2edeye2 ай бұрын

  I will have to get out to my buddies and harass him on video. :D

• 
  @ngurahagung-gy7mu2 ай бұрын

  Just my suggestion if you don't mind, Please make a (POV) Video when You ride It BTW Neat look machine, just got the B version year "75 Last month a red Color with Black and white (100) Decals on the Gas tank

• 
  @i2edeye2 ай бұрын

  I will make a riding video, thanks. Love the red bikes too.

• 
  @dontblameme63282 ай бұрын

  I don't mind buying Chinese made stuff but I will never have anything with the word California on it.

• 
  @i2edeye2 ай бұрын

  I don't blame you lol

• 
  @handbannana36102 ай бұрын

  I had a bent D44 housing that was causing me to lose axle seals constantly so I got their removal and install down to a science. First thing is to cut off the bearing cage and get it and the rollers out of the way. The locking ring is soft metal so I drill it with 1/4" and then 3/8" the drill bit wont hurt the axle so it's a no brainer. Once its drilled you just smack it off with a cold chisel. The bearing race gets cut 90% with the grinder and use the cold chisel to break it at the cut line. I put them back together as shown but I'll warn that some axles have a step above where the seal rides that you can slide the seal on trying to get it out of your way and it ends up ruining the seal. Ask me how I know.

• 
  @i2edeye2 ай бұрын

  Another technique to keep in my back pocket. I think my axle is straight so hopefully I won't be back in there for a while.

• 
  @Lonndog3 ай бұрын

  Any suggestions on year and make of begicle to use for the donor Alt. Thanks and great vid!

• 
  @i2edeye3 ай бұрын

  The easiest would be from a later year Datsun with an L series that has an internally regulated alternator. 78 thru 80 620, 510 or Z.

• 
  @DoubleMGG3 ай бұрын

  Nice video

• 
  @i2edeye3 ай бұрын

  Thank you

• 
  @user-rd7gf6jg5r3 ай бұрын

  63A is like the defacto/ubiquitous 510 trans swap for l series. Rebuilt the one in my wagon, it was a pain in the ass compared to the 71/long tail style truck/z car trans ive done or helped rebuild. The long tails are better trans as well with more ratio options from what i recall, but the 63a is the same length as stock 510 so you dont have to cut up your tunnel or shorten your driveshaft, and way better to have overdrive and a better shifter design than the stock 510 monkey motion trans. Assume this info applies to 521s as well. Nice to know about the bellhousing swap trick. And for the bronze bushings, you can get a GM door hinge rebuild kit and its a straight swap for the plastic ones (kit #38377)

• 
  @i2edeye3 ай бұрын

  Good to know the 63a is a pain compared to 71, I will be going through this one. Good tip for new plastic bushings thanks.,

• 
  @user-rd7gf6jg5r3 ай бұрын

  @@i2edeye good luck! wasnt impossible as DIY, the basics are the same as the other nissan transmissions if youve done those, I just remember the rebuild kit i had being kind of inadequate. It was just generally more difficult to press stuff in and out and we had to get creative with the press. vs the 71s which are very DIY friendly

• 
  @i2edeye3 ай бұрын

  @@user-rd7gf6jg5r Good things to know ahead of time. Thanks

• 
  @NissanNut743 ай бұрын

  Great stuff! I just reinstalled my 1970 521 L16 4 speed trans. I have never seen this style before, it has an oil plan, it has the wierd trans mount. Shifter is really different than all these. Its bolted on from bottom of chrome stick. Its totally different than any other L series. Also the starter holes are through bolts, no threads! I also noticed the L/z/vg/ka all use the same input shaft. So same clutch tool from 1970-2004 trucks/pathfinders I have done. This input is also the same as 4cy transfer case inputs. v6 inputs are larger on tcase. I am still trying to decide what engine and manual trans to upgrade to in the 521. Leaning towards a ka with 5speed. Maybe a qr25de.

• 
  @i2edeye3 ай бұрын

  Thanks. I will be pulling one of those 4 speeds to put that dogleg in my 68 521. I think the Z/KA have the holes like that, car trans thru hole, truck threaded. Will have to double check. Good info on the tcase. Qr25de could be a good swap if you an get one from a truck.

• 
  @DatFunnyPerson4 ай бұрын

  the outro is the best thing

• 
  @i2edeye4 ай бұрын

  Thanks for watching :)

• 
  @RATMotoX4 ай бұрын

  Great video! Can you PLEASE please quickly post the part number information for the rebuild kit you bought?? I am in the middle of rebuilding my CJ5 with same steering box but parts store matched the wrong seal kit. The input shaft seal and dust cover they provided are both too small, although everything else in the kit fits. Thanks!!!!

• 
  @i2edeye4 ай бұрын

  Edelmann 7095 Power Steering Gear Box Input Shaft Seal Kit on amazon www.amazon.com/gp/product/B000CGROBA/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

• 
  @jaffarjaffar83864 ай бұрын

  I have a 2008 Nissan Xterra. Where can I get such an engine and how much does it cost? I live in Iraq

• 
  @i2edeye4 ай бұрын

  Not sure on delivery to Iraq, but the engine was about $4500 shipped I think. Ibought it from these guys. VQ40DE Rebuillt Crate Engine Steve Ricehouse Engines Direct Distributors LLC 1-800-998-2100 ext 102 (623) 581-6400 local (623) 581-9400 fax [email protected]

• 
  @Barton_Motors_Ltd4 ай бұрын

  Great video

• 
  @i2edeye4 ай бұрын

  Thank you. :)

• 
  @fantomhobo4 ай бұрын

  Free socket yay

• 
  @i2edeye4 ай бұрын

  It was probably mine anyways lol.

• 
  @fantomhobo4 ай бұрын

  @@i2edeye but if it is yours and you forgot about it that makes it free

• 
  @i2edeye4 ай бұрын

  @@fantomhobo That is true lol

• 
  @fantomhobo4 ай бұрын

  The parking spot got filled within 5 minutes and was hoping for no rodent intrusion with where it was. Sorry

• 
  @i2edeye4 ай бұрын

  No worries, it's not like you can put up a sign saying "no vacancy" lol.

• 
  @fantomhobo4 ай бұрын

  @@i2edeye I mean, I could and confuse everybody

• 
  @i2edeye4 ай бұрын

  @@fantomhobo lol

• 
  @fantomhobo4 ай бұрын

  This gonna sound silly but what did you do with that cable?

• 
  @i2edeye4 ай бұрын

  Zipline? :D

• 
  @bluebalverde31154 ай бұрын

  This is Awesome!

• 
  @i2edeye4 ай бұрын

  Thanks. Hopefully I can get some updates in the near future.

• 
  @lawsofhumannature20494 ай бұрын

  Where did you purchase your engine? What else did you replace besides the engine?

• 
  @i2edeye4 ай бұрын

  VQ40DE Rebuillt Crate Engine Steve Ricehouse Engines Direct Distributors LLC 1-800-998-2100 ext 102 (623) 581-6400 local (623) 581-9400 fax [email protected] I replaced all the sensors and water pump.

• 
  @i2edeye4 ай бұрын

  I go over some of this stuff in this video. kzread.info/dash/bejne/Ynd2ldiKZqqopcY.html

• 
  @lawsofhumannature20494 ай бұрын

  @@i2edeye thank you!!

• 
  @i2edeye4 ай бұрын

  @@lawsofhumannature2049 No problem