How is the tape holding up for you now, a year later?
@iqro95Күн бұрын
Appreciate the video
@chadw27842 күн бұрын
Great video, I just finished mine. FYI, I have a 2024 wilderness, so the radiator setup is different, the re is no top access into the area behind the grill. You must remove the grill. However, it is a fairly easy task, I used this video for the grill removal. kzread.info/dash/bejne/jHqnrJp9g5vFdNY.htmlsi=h6DIa8uk7RO1F27e
@clpreston5 күн бұрын
Very nice looks much better!
@dannysmobiletuneup83177 күн бұрын
You don't show which shock is right and left on floor.
@PatrickKasilag7 күн бұрын
Both shocks are labeled.. RH and LH. Only one way to put it on
@jeffmckee82307 күн бұрын
How much did you find your mpg dropped with the lift, tires and wheels?
@PatrickKasilag7 күн бұрын
About 3 mpg after lift and bigger tires AND roof rack. Only 2 mpg loss without the roof rack on
@chrisryan88637 күн бұрын
Hi Patrick. I have a 2021 Forester with a similar engine set up and this video helped me a lot in understanding how to access the PCV hose and connection points for an oil catch can I am going to install. I am wondering why you chose an oil separator versus and oil catch can? Also, do you know if there would be an warranty issues if installing this system? Our Forester has a lengthy warranty and I don't want to run into nonsense with the dealer if I have to take it there for warranty work.
@ralphrodriguez5510 күн бұрын
Bosche envision wiper blades fits like a glove
@marshallohio551217 күн бұрын
Listen Kids ,,, these HB Racks are very nice 👍 for the price point 👍.. I didn't install those side screws and rubber washers,, for the rack isn't going to come appart after installation... Wife bought me a long Fender Guitar plate that I installed over the H.Master decal... Recently, l was approached by an individual asking where l bought the Fender rack, and if a Gibson rack was available ... Too Funny 😅😅😅😅 Oh, also purchased HB freight $5 (5'*7') poly tarp and $8 orange straps 4 pack ... Less than $100 for everything 😉😉😉. Our camp chairs , hammocks, tool bag, fishing gear, and canopy fits perfectly inside basket without looking like homeless people 😔😔😔😊😊😊
@carlosbustos805518 күн бұрын
Awesome! I am also not a fan of the clear taillights. Where in VA? Im in the Ashburn area.
@PatrickKasilag17 күн бұрын
I’m in Fairfax
@MooseRidez19 күн бұрын
So much cleaner
@PatrickKasilag19 күн бұрын
Thanks! I wish it just came that way from factory..
@lisaf331420 күн бұрын
Patrick thank you for this great video. I just changed my engine air and cabin air filters. Your video was easy to follow and loved your close-up shots and the step-by-step process. I had a little trouble getting my glove box back together, but I did it. I have a 2020 Crosstrek Limited and bought offbrand filters with no problems. My filters looked pretty much like yours did😆 I have your video saved for the next time. Thank you again.
@PatrickKasilag19 күн бұрын
Thanks! Glad I could help
@juancruzmichelli900520 күн бұрын
I bought Denso this time and it has the correct airflow indicators just like the one shown in the video. The last brand I that was previously installed had the arrows pointing in the opposite (incorrect) direction. I doubt it actually matters but I will be buying Denso in the future as it has the correct orientation.
@ryan432720 күн бұрын
Very well done video, thank you! I'm getting ready to install my hitch on my 2019 Crosstrek.
@fatclemenzzza21 күн бұрын
Thank you for this. I don't mind taking in for oil change and tire rotation, but if i can minimize that service charge for something i can do on my own without issue, i rather go that route
@gregkatis797021 күн бұрын
Should have greased the caliper slide pins at same time.
@JasonMckenzie-pb8jq25 күн бұрын
Extremely informative thanks
@user-bt4il9xk9v26 күн бұрын
We are the factory of China's luggage rack to see that there are many products in the online shop, we also have good price and quality, if you can cooperate with us, you can leave a contact information TRD luggage rack are available
@streetmachine821127 күн бұрын
Good job man.
@RobWhittlestone29 күн бұрын
Nice installation done properly with the relay. Too many people do a half-assed installation without the relay and don't realise they are not getting the best out of their horns. All the best, Rob in Switzerland
@alejandrasanchez895229 күн бұрын
Do you have the light manufacturer/info?
@peckerwood78029 күн бұрын
I just got a 2013 crosstrek definitely be doing some of these mods thanks dood
@ambrooks5Ай бұрын
Well that’s a stupid design 😂
@PatrickKasilag25 күн бұрын
Couldn’t agree more.. I was shocked when I figured out what I had to do for a filter change lol
@andrewadams8313Ай бұрын
Perfect. I felt so dumb before this video. Great stuff man.
@jovanstarАй бұрын
Stealership charged me 150 for less than 10 mins of work. Never again. Thank you for this.
@PatrickKasilag25 күн бұрын
Glad I could help!
@rustysrugerАй бұрын
Excellent!
@ktoney88Ай бұрын
This video saved me $1400! Sir I hope you win the lottery
@camilled33Ай бұрын
I haven't installed mine yet, but this video is so easy to follow that I will do it soon! thanks for posting.
@annedonatelli1634Ай бұрын
Video is not very helpful. You didn't show where the sensor was located.
@jenjenny79Ай бұрын
You made this seem so easy. Thank you!
@joehan2867Ай бұрын
You're a godsend good sir
@Rob-xz6uvАй бұрын
Please dump the unsightly advertising thing around your number plates. Car yards love to put them on cars that they sell.
@kenarcher2292Ай бұрын
Great video!
@laserfalconАй бұрын
Do you have any insight in locking the flywheel on the m20 ? Seems to be no one has a clue
@car24dudeАй бұрын
I would clean it with every oil change.
@erowe3Ай бұрын
thanks for posting this man - much easier than following the written instructions!
@daniellevy3035Ай бұрын
Thanks a lot for posting! VERY helpful!
@markh3478Ай бұрын
The $32 Rain-X Endura silicone were not even close to proper mounting hardware included but the Latitude had the right adapter for what Subaru Crosstrek needs BUT after 3 months of use mine flew off in a heavy rainstorm . I had an extra wiper so no big deal but next time will not buy Rain-X for the Crosstrek . Just FYI the Subaru wiper arm mount is called narrow PTB type . That means a penny will not slide into the car's wiper arm fitting . Will get the Aero or Subaru brand . Trico stink for any car IMHO.
@steveli3163Ай бұрын
thank you it works
@obaidalali5587Ай бұрын
Which exthust is that my car is 318 i swap it into m52 engine
@cilvrwingАй бұрын
What size of hose are those? Inside and outside diamater
@cfitzgdukeАй бұрын
So now you shock bottoms out before the bump stop? Is that right? Any kits that avoid this issue?
@moosmya2 ай бұрын
can we get an update ? !!!
@Mark-mf3yr2 ай бұрын
Great video thanks for the help!
@MisterMister58932 ай бұрын
How easy would it be for someone with a wrench to come along and steal this?
@PatrickKasilag2 ай бұрын
Well the lights alone they may be able to take, but idk who would take a risk like that over $20 and end up with no brackets or wiring harness. The brackets are the expensive part, which they can’t take without getting the hood latch open first.
@db70352 ай бұрын
😢 I thought on the middle bonut that you did I put my nut on the outside I have to put it on the inside. I thought the bolt holds that with the plastic thing that turns on. I just want to make sure so I don't screw up my kayak
@hexx7602 ай бұрын
Just picked up the same basket, how is yours holding up so far?
@PatrickKasilag2 ай бұрын
Been pretty happy with it, though starting to show some surface rust on the center bars after 3.5 years.
@nathankassydonahoo45062 ай бұрын
I agree, you skipped the meat of the video... very generic..
@fynndasbach23152 ай бұрын
Awesome video my man! Super comfy to watch and easy to understand! 😊
@digicabtech2 ай бұрын
Do you need to undo the electric break latch before remove the brake pads.
Пікірлер
How is the tape holding up for you now, a year later?
Appreciate the video
Great video, I just finished mine. FYI, I have a 2024 wilderness, so the radiator setup is different, the re is no top access into the area behind the grill. You must remove the grill. However, it is a fairly easy task, I used this video for the grill removal. kzread.info/dash/bejne/jHqnrJp9g5vFdNY.htmlsi=h6DIa8uk7RO1F27e
Very nice looks much better!
You don't show which shock is right and left on floor.
Both shocks are labeled.. RH and LH. Only one way to put it on
How much did you find your mpg dropped with the lift, tires and wheels?
About 3 mpg after lift and bigger tires AND roof rack. Only 2 mpg loss without the roof rack on
Hi Patrick. I have a 2021 Forester with a similar engine set up and this video helped me a lot in understanding how to access the PCV hose and connection points for an oil catch can I am going to install. I am wondering why you chose an oil separator versus and oil catch can? Also, do you know if there would be an warranty issues if installing this system? Our Forester has a lengthy warranty and I don't want to run into nonsense with the dealer if I have to take it there for warranty work.
Bosche envision wiper blades fits like a glove
Listen Kids ,,, these HB Racks are very nice 👍 for the price point 👍.. I didn't install those side screws and rubber washers,, for the rack isn't going to come appart after installation... Wife bought me a long Fender Guitar plate that I installed over the H.Master decal... Recently, l was approached by an individual asking where l bought the Fender rack, and if a Gibson rack was available ... Too Funny 😅😅😅😅 Oh, also purchased HB freight $5 (5'*7') poly tarp and $8 orange straps 4 pack ... Less than $100 for everything 😉😉😉. Our camp chairs , hammocks, tool bag, fishing gear, and canopy fits perfectly inside basket without looking like homeless people 😔😔😔😊😊😊
Awesome! I am also not a fan of the clear taillights. Where in VA? Im in the Ashburn area.
I’m in Fairfax
So much cleaner
Thanks! I wish it just came that way from factory..
Patrick thank you for this great video. I just changed my engine air and cabin air filters. Your video was easy to follow and loved your close-up shots and the step-by-step process. I had a little trouble getting my glove box back together, but I did it. I have a 2020 Crosstrek Limited and bought offbrand filters with no problems. My filters looked pretty much like yours did😆 I have your video saved for the next time. Thank you again.
Thanks! Glad I could help
I bought Denso this time and it has the correct airflow indicators just like the one shown in the video. The last brand I that was previously installed had the arrows pointing in the opposite (incorrect) direction. I doubt it actually matters but I will be buying Denso in the future as it has the correct orientation.
Very well done video, thank you! I'm getting ready to install my hitch on my 2019 Crosstrek.
Thank you for this. I don't mind taking in for oil change and tire rotation, but if i can minimize that service charge for something i can do on my own without issue, i rather go that route
Should have greased the caliper slide pins at same time.
Extremely informative thanks
We are the factory of China's luggage rack to see that there are many products in the online shop, we also have good price and quality, if you can cooperate with us, you can leave a contact information TRD luggage rack are available
Good job man.
Nice installation done properly with the relay. Too many people do a half-assed installation without the relay and don't realise they are not getting the best out of their horns. All the best, Rob in Switzerland
Do you have the light manufacturer/info?
I just got a 2013 crosstrek definitely be doing some of these mods thanks dood
Well that’s a stupid design 😂
Couldn’t agree more.. I was shocked when I figured out what I had to do for a filter change lol
Perfect. I felt so dumb before this video. Great stuff man.
Stealership charged me 150 for less than 10 mins of work. Never again. Thank you for this.
Glad I could help!
Excellent!
This video saved me $1400! Sir I hope you win the lottery
I haven't installed mine yet, but this video is so easy to follow that I will do it soon! thanks for posting.
Video is not very helpful. You didn't show where the sensor was located.
You made this seem so easy. Thank you!
You're a godsend good sir
Please dump the unsightly advertising thing around your number plates. Car yards love to put them on cars that they sell.
Great video!
Do you have any insight in locking the flywheel on the m20 ? Seems to be no one has a clue
I would clean it with every oil change.
thanks for posting this man - much easier than following the written instructions!
Thanks a lot for posting! VERY helpful!
The $32 Rain-X Endura silicone were not even close to proper mounting hardware included but the Latitude had the right adapter for what Subaru Crosstrek needs BUT after 3 months of use mine flew off in a heavy rainstorm . I had an extra wiper so no big deal but next time will not buy Rain-X for the Crosstrek . Just FYI the Subaru wiper arm mount is called narrow PTB type . That means a penny will not slide into the car's wiper arm fitting . Will get the Aero or Subaru brand . Trico stink for any car IMHO.
thank you it works
Which exthust is that my car is 318 i swap it into m52 engine
What size of hose are those? Inside and outside diamater
So now you shock bottoms out before the bump stop? Is that right? Any kits that avoid this issue?
can we get an update ? !!!
Great video thanks for the help!
How easy would it be for someone with a wrench to come along and steal this?
Well the lights alone they may be able to take, but idk who would take a risk like that over $20 and end up with no brackets or wiring harness. The brackets are the expensive part, which they can’t take without getting the hood latch open first.
😢 I thought on the middle bonut that you did I put my nut on the outside I have to put it on the inside. I thought the bolt holds that with the plastic thing that turns on. I just want to make sure so I don't screw up my kayak
Just picked up the same basket, how is yours holding up so far?
Been pretty happy with it, though starting to show some surface rust on the center bars after 3.5 years.
I agree, you skipped the meat of the video... very generic..
Awesome video my man! Super comfy to watch and easy to understand! 😊
Do you need to undo the electric break latch before remove the brake pads.