You’re quite welcome more to come. We have number five, which will be the taxi test and number six, which is gonna be the flight. Another guy is gonna fly me. The second flight will be operating it so stay tuned.
@andystoybox17235 күн бұрын
Nice ! Thanks for video 👍🏻
@ToyotaTonyRC7 күн бұрын
Yeah, real hot date
@richardetschman94497 күн бұрын
When you get that engine installed in that airframe your going to have a hot date.😂
@ToyotaTonyRC9 күн бұрын
I find them the cost a lot more money and I like the idea that mine starts in 10 seconds real estate not a big deal I can make things fit
@fern69789 күн бұрын
Man, those G5 Kingtech engines take up so much real estate, that's crazy... You should try the Xicoy light engines... They're unmatched in fuel efficiency with such a minimal footprint for electronics. Hands down the best engines on the market right now.
@coleenwells19 күн бұрын
Blooper reel🤣
@ToyotaTonyRC23 күн бұрын
OK will do. I will continue with the build. Everybody can see right now. I’m in the middle of putting a coating on it so I should have a video in about another week.
@ToyotaTonyRC23 күн бұрын
Yes, it’s still available. You have to look under turbines then go to foam and it’ll be there. Did you the first or second one?
@dwkach25 күн бұрын
Don't see on Banana Hobby site.....is it still available?
@beyond898127 күн бұрын
Good luck with the build - will follow with interest
@ToyotaTonyRCАй бұрын
I also get quarter inch tape from Amazon. It works well. It’s a Dupont tape.
@ToyotaTonyRCАй бұрын
Yes, going to do some flight videos this weekend to finish up the Phoenix corsair I’m gonna show you a free wing F-16 90 mm front wheel Gyro set up and a preview of the AF raptor flight using my free wing raptor
@fcolon1976Ай бұрын
Where can I get one please
@ToyotaTonyRCАй бұрын
bananahobby.com. They also have this in a 105 EDF if you want to go that route
@fcolon1976Ай бұрын
@@ToyotaTonyRC perfect! Did you upload the video build already? And thanks 😊
@ToyotaTonyRCАй бұрын
Not yet I’m getting started on Tuesday. I’ll have everything laid out on the bench and it’s probably gonna be probably six or seven videos. I don’t know for sure if you start watching I should have the videos uploaded probably by Thursday.
@fcolon1976Ай бұрын
@@ToyotaTonyRC sweet, looking forward to it! 👍
@ToyotaTonyRCАй бұрын
Frog tape
@ToyotaTonyRCАй бұрын
I know everybody’s waiting to see me build this just be patient. I’m just waiting for the motor to come in as soon as I have the motor that’s all the components I need and we’ll get on with the bill sorry for the delay
@fern6978Ай бұрын
Nice! What 1/4" bend tape are you using for this? Seems to work well!
@mikechappell2377Ай бұрын
Hey there, MR Tony ' have you started on your AF- F22 Rapator turbine?
@ToyotaTonyRCАй бұрын
About two more weeks it’s gonna be up on the bench and we’re gonna get started still waiting on the engine to be delivered
@ToyotaTonyRCАй бұрын
When with the stinger twin 30 cc?
@crispyfilms3983Ай бұрын
starting to come together well! What are you going with for the motor?
@RonJustice332 ай бұрын
That's pretty cool Tony , thank you : )
@ToyotaTonyRCАй бұрын
You bet
@ToyotaTonyRC2 ай бұрын
Yeah, he’s really good. He makes very little mistakes.
@johnmcgee28062 ай бұрын
SWEEEEEET. He greased it in on the T&G
@christianbaby50392 ай бұрын
tony hi
@robsrc20182 ай бұрын
Looking forward to following the build! It's going to be a nice plane!!! Keep up the great work
@ToyotaTonyRC2 ай бұрын
Thanks Rob, more to come soon!
@crispyfilms39832 ай бұрын
Sick build! Never thought I’d see you with a nitro plane. Good luck with it! -Dom Barbuto
@ToyotaTonyRC2 ай бұрын
Hey Dom, nice to hear from the north! It will be 2 stroke gas set, like a dirt bike, more to come turbine in the works.
@coleenwells2 ай бұрын
The yoke joke😂✈️
@Hype_RC2 ай бұрын
Excellent work and great tutorial! Thanks for recording and posting Tony 👍🏽The entire series has some great nuggets! Just did my beater 70 fms Hornet last night before seeing your vids. I will definitely use some of your pointers on the next one.
@ToyotaTonyRC2 ай бұрын
Glad you enjoyed the video-update me on your flight, feel free to hit me up with any questions!
@Hype_RC2 ай бұрын
@@ToyotaTonyRC thanks Tony! People like you are why I love this hobby! Paying it forward to newer flyers like myself. Thanks
@ToyotaTonyRC2 ай бұрын
@@Hype_RC you’ll get there it just takes time and practice. If you have any questions, make sure you hit me up.
@robsrc20183 ай бұрын
Looks fantastic!!! Beautiful job!!! Hope you do the first flight on video. Keep up the great work, Robert
@ToyotaTonyRC3 ай бұрын
That's the plan!
@ToyotaTonyRC2 ай бұрын
Hey Rob, we’re gonna see how this goes. I’m gonna fly this weekend and hopefully post a video I did wreck a blue angels F18 last week the maiden flight for this one’s gonna be this week
@mikechappell23773 ай бұрын
She's looking really nice I appreciate your hard work an details thank you for sharing
@ToyotaTonyRC3 ай бұрын
Thank you very much! Any questions feel free to ask I’ll be more than happy to answer when I can
@ToyotaTonyRC3 ай бұрын
Thank you should have it posted in a day or two it’s finished really came out good
@robsrc20183 ай бұрын
Nice jet! Coming out beautiful! Can't wait to see it finished! Great job! It will definitely look great at the field and especially in the air! Robert
@robsrc20183 ай бұрын
Just watched the video of the unboxing of your af model f22 raptor. Im at that stage of flying myself. I'm ordering the exact same jet to get my turbine waver! They say this is the perfect plane to start with as you said in the video. Just curious what turbine your going to run in yours? Are you going to do videos of the build? Alot of guys are at the same stage of flying, and would enjoy watching the progress, good luck! Robert
@mikechappell23773 ай бұрын
Just received mine I have a k102 that iam going to put in hope to see your build video
@ToyotaTonyRC3 ай бұрын
Mike , the K1 02 will work beautifully in that plane I’m two planes away from starting it. I bought it on a pre-order just like you did so what I’m gonna do is I’m gonna do a full build start to finish running the K102 on a test stand, so stay tuned. I would love to see your build as well.
@ToyotaTonyRC3 ай бұрын
That’s what I’m going with. I’m going with the king tech 102 g5 will give you a hair more thrust the weight you can manage the throttle I did have a conversation with Jeremy Solt he said the 80s OK but he said he wished it had a little more power that’s what made my decision. He said it lands slow and goes fast as well all around a great jet. If you have the free wing 90 you can fly this one. Good luck hope to see your jet. One is done more videos common. I’m two bills away, but want to be finished this week and then I’m doing the Phoenix corsairwith the gas motor in it, so stay tuned
Пікірлер
You’re quite welcome more to come. We have number five, which will be the taxi test and number six, which is gonna be the flight. Another guy is gonna fly me. The second flight will be operating it so stay tuned.
Nice ! Thanks for video 👍🏻
Yeah, real hot date
When you get that engine installed in that airframe your going to have a hot date.😂
I find them the cost a lot more money and I like the idea that mine starts in 10 seconds real estate not a big deal I can make things fit
Man, those G5 Kingtech engines take up so much real estate, that's crazy... You should try the Xicoy light engines... They're unmatched in fuel efficiency with such a minimal footprint for electronics. Hands down the best engines on the market right now.
Blooper reel🤣
OK will do. I will continue with the build. Everybody can see right now. I’m in the middle of putting a coating on it so I should have a video in about another week.
Yes, it’s still available. You have to look under turbines then go to foam and it’ll be there. Did you the first or second one?
Don't see on Banana Hobby site.....is it still available?
Good luck with the build - will follow with interest
I also get quarter inch tape from Amazon. It works well. It’s a Dupont tape.
Yes, going to do some flight videos this weekend to finish up the Phoenix corsair I’m gonna show you a free wing F-16 90 mm front wheel Gyro set up and a preview of the AF raptor flight using my free wing raptor
Where can I get one please
bananahobby.com. They also have this in a 105 EDF if you want to go that route
@@ToyotaTonyRC perfect! Did you upload the video build already? And thanks 😊
Not yet I’m getting started on Tuesday. I’ll have everything laid out on the bench and it’s probably gonna be probably six or seven videos. I don’t know for sure if you start watching I should have the videos uploaded probably by Thursday.
@@ToyotaTonyRC sweet, looking forward to it! 👍
Frog tape
I know everybody’s waiting to see me build this just be patient. I’m just waiting for the motor to come in as soon as I have the motor that’s all the components I need and we’ll get on with the bill sorry for the delay
Nice! What 1/4" bend tape are you using for this? Seems to work well!
Hey there, MR Tony ' have you started on your AF- F22 Rapator turbine?
About two more weeks it’s gonna be up on the bench and we’re gonna get started still waiting on the engine to be delivered
When with the stinger twin 30 cc?
starting to come together well! What are you going with for the motor?
That's pretty cool Tony , thank you : )
You bet
Yeah, he’s really good. He makes very little mistakes.
SWEEEEEET. He greased it in on the T&G
tony hi
Looking forward to following the build! It's going to be a nice plane!!! Keep up the great work
Thanks Rob, more to come soon!
Sick build! Never thought I’d see you with a nitro plane. Good luck with it! -Dom Barbuto
Hey Dom, nice to hear from the north! It will be 2 stroke gas set, like a dirt bike, more to come turbine in the works.
The yoke joke😂✈️
Excellent work and great tutorial! Thanks for recording and posting Tony 👍🏽The entire series has some great nuggets! Just did my beater 70 fms Hornet last night before seeing your vids. I will definitely use some of your pointers on the next one.
Glad you enjoyed the video-update me on your flight, feel free to hit me up with any questions!
@@ToyotaTonyRC thanks Tony! People like you are why I love this hobby! Paying it forward to newer flyers like myself. Thanks
@@Hype_RC you’ll get there it just takes time and practice. If you have any questions, make sure you hit me up.
Looks fantastic!!! Beautiful job!!! Hope you do the first flight on video. Keep up the great work, Robert
That's the plan!
Hey Rob, we’re gonna see how this goes. I’m gonna fly this weekend and hopefully post a video I did wreck a blue angels F18 last week the maiden flight for this one’s gonna be this week
She's looking really nice I appreciate your hard work an details thank you for sharing
Thank you very much! Any questions feel free to ask I’ll be more than happy to answer when I can
Thank you should have it posted in a day or two it’s finished really came out good
Nice jet! Coming out beautiful! Can't wait to see it finished! Great job! It will definitely look great at the field and especially in the air! Robert
Just watched the video of the unboxing of your af model f22 raptor. Im at that stage of flying myself. I'm ordering the exact same jet to get my turbine waver! They say this is the perfect plane to start with as you said in the video. Just curious what turbine your going to run in yours? Are you going to do videos of the build? Alot of guys are at the same stage of flying, and would enjoy watching the progress, good luck! Robert
Just received mine I have a k102 that iam going to put in hope to see your build video
Mike , the K1 02 will work beautifully in that plane I’m two planes away from starting it. I bought it on a pre-order just like you did so what I’m gonna do is I’m gonna do a full build start to finish running the K102 on a test stand, so stay tuned. I would love to see your build as well.
That’s what I’m going with. I’m going with the king tech 102 g5 will give you a hair more thrust the weight you can manage the throttle I did have a conversation with Jeremy Solt he said the 80s OK but he said he wished it had a little more power that’s what made my decision. He said it lands slow and goes fast as well all around a great jet. If you have the free wing 90 you can fly this one. Good luck hope to see your jet. One is done more videos common. I’m two bills away, but want to be finished this week and then I’m doing the Phoenix corsairwith the gas motor in it, so stay tuned