Watching in 2024, Bro you saved me so much time setting up a full transfer from my 8 year old gaming computer to my new op gaming rig! Thanks for the help!
@hueytlatoani11772 ай бұрын
What size is the crush washer?
@kaylat61954 ай бұрын
I’m just trying to change my hubcaps 😭 I’m used to just being able to pop them off but on my 09 civic it’s held on by lug nuts ☹️ never jacked up a car before
@joerosas28764 ай бұрын
This guy gave me a headake camera was flying every where,good video.
@8754roberto5 ай бұрын
I did the same and disconnected the hose coming for. The converter , I turned on the engine in intervals of 3-4 seconds and making sure to keep adding so it doesn’t run dry
@timp39315 ай бұрын
"bottle jack that comes with the car" nope, it is a scissors jack. My small bottle jack is too tall for the usual jack points.
@PUPIMUMIP6 ай бұрын
thanks
@RezboaDog6 ай бұрын
I just bought a 2011 Civic. I have jacked up cars in the past, but I'm always hesitant on newer vehicles. Thank you!
@n0name7 ай бұрын
Bro is the father I never had
@svjim18 ай бұрын
Yeah I had a real hard time getting the oil bolt loose. The mechanic also made the oil filter really tight as well. I had a tool though that fits over the end of the filter but even with that it was hard getting it loose. The new filter has a rough surface on that end so you can grip it good for a hand tight. That surface won't allow for the tool.
@RosinGlobs8 ай бұрын
Amazing video, super informative and straight to the point 🔥🔥🔥 thank you for this content
@aaronharris90849 ай бұрын
Really helpful-thank you!
@simonriddick10 ай бұрын
I know it's a older video but man I was pissed today. I just got a 2012 and was going to do the trans fluid. There's so much plastic under this car it doesn't even make sense. I really miss working on my Cobalt SS already. On the balt there are tons of very safe jacking points all over from the K memeber up front to the frame rails and rear sub frame. I've never had a car fall off of a jack and this is the first car it's happened to me on. Lesson learned on this car for sure. Now what I do is use that little spot at the front to lift up the front wheels then I put my steel wheels and 2x4's and sit the car down on the pinch welds there. At least then it has no chance of moving. A bit scary working on this Honda. If I had it my way all that plastic would have to go as well. Anyways thanks for the video.
@drury2d810 ай бұрын
stellar explanation!
@imbe.10 ай бұрын
I was almost about to return my jackstands because i could not figure out where the hell you are supposed to jack up a 2010 civic with all of that plastic all over the place.
@pebblez_10 ай бұрын
ty
@ryleighelliott958710 ай бұрын
what do you do with the old oil?
@tengzturiagaiii318511 ай бұрын
After filling and going to all the R,Nand D like you did. When checking the fluid correct level. Does it need to pass the x x x range? Like does it need to be on hot area of the dip stick?
@philliph55411 ай бұрын
Never use the jack stands he uses. They have all been recalled for catastauphic failure. Only use the kind that has a solid pin holding their height.
@shawnlavigne906911 ай бұрын
My uncle put the jack stands under the rear control arms. I'm not sure about that?
@x.x..x.x11 ай бұрын
thx
@miguelquevedo553 Жыл бұрын
Thank you for the video
@eduardoherrera9184 Жыл бұрын
I Love this Little Civic its so underrated But its an excellent tool from honda in terms of reliability. Honda reability at its best
@coryharper5904 Жыл бұрын
Great video, only change I would suggest is that a honda oil filter is superior to any other brand, their patented system is unmatched by any other filtration system
@JmguyN8 Жыл бұрын
Does that car have a filter in the transmission?
@qihongchen4631 Жыл бұрын
So far,the best video for how to jack up gen#8 Honda civic.
@Delta922 Жыл бұрын
I don't have a pinch weld on my civic. Is there another jack point I can use to place the jackstands under?
@chrismckee5710 Жыл бұрын
I was always skeptical jacking on the tow hook, and now I'm not thank you.
@Fin6531 Жыл бұрын
Great video, thank you!
@specter1096867II Жыл бұрын
Craziest part of this is i never had to replace the washer and still havent leaked lol
@spencerfrey2609 Жыл бұрын
Just an extra tip I learned from my 300zx that sits low. Get some 2x10 by 3 feet boards (like decking board) and drive the car onto the boards before jacking. This raises the car and makes jacking and inspecting underneath much easier.
@bramapanday9505 Жыл бұрын
Thank you . Used your video along with another an yours gave me the extra techniques to get the job done. Much appreciated.
@ephraimcamacho9600 Жыл бұрын
My next job for my daughter's civic. Trying to teach her how to save doing it yourself!!
@AA-os1sg Жыл бұрын
Is this bar your lifting on the subframe?
@MogRules01 Жыл бұрын
This video was literally more clear then the dealership and my user manual 🤣🤣🤣🤣 Been jacking this car up for 10 years and didn't know about the arrows haha. Usually just use the jack points on the sides, but I needed to get both front tires up at the same time....damn directional tires lol.
@shafferfs Жыл бұрын
Dude just show me the jack points Jesus
@markcatcash4688 Жыл бұрын
My sons car will start shifting harsh and a flush and fill helps. But what really made a HUGE difference is Lucas Transmission fix. I had about 1/4 to 1/2 a bottle and its helps it shift
@rodey6594 Жыл бұрын
Can't seem to take off my eyes where your Fuel Air Ratio sensor is located 🤣 I just did mine on 2015 civic si coupe and it was way more work than this civic model of yours.
@crazygrabs877 Жыл бұрын
Had to turn off this vid with the ahs ums ...
@OperatedGamer Жыл бұрын
know your basics course is just what I needed. Taking it a day at a ti so I can fully grasp the core of soft.
@Billy-jb2xc Жыл бұрын
Anyone else get this on their recommendations 10 years later and not even own a windows
@eemerald2323 Жыл бұрын
Should've filled up the oil filter with oil before installing it. Because now when the oil pump tries to pump the oil then there will be a lapse where the oil pump could be damaged. Also you should've left the drain bolt out and let it drip longer while you changed the filter. New filter goes in first before the drain bolt.
@franciscocapellanvalverde4052 жыл бұрын
Hola buenas, estoy pensado en comprar un HONDA Civic 2.2 iDTEC Executive diesel, pero mido 1.85 y soy bastante corpulento, estare comodo en el coche? y es fiable este coche?
@franciscocapellanvalverde4052 жыл бұрын
Hola buenas, estoy pensado en comprar un HONDA Civic 2.2 iDTEC Executive diesel, pero mido 1.85 y soy bastante corpulento, estare comodo en el coche? y es fiable este coche?
@thefrugaljeeper40542 жыл бұрын
Can you use a10w30 synthetic?
@Davidgarcia677772 жыл бұрын
what's about the fliter?
@stevemlejnek70732 жыл бұрын
Thanks. The 10 cent crush washer cost me $5 at my dealership. The fluid isnt cheap either! But, keeping your Civic well maintained is important. I am doing my fluid every 50k miles.
@greeneking77 Жыл бұрын
it's a bag of 5 or 1 washer?
@jenniferparthasarthy35142 жыл бұрын
Excellent details!
@josevargassanabria86322 жыл бұрын
Question, if the car has over 100k miles do I need to use a different oil than the one on this vid from 7yrs ago?
@jessisamessica2 жыл бұрын
Thank you! Made it super easy to take care of my oil change and figure out where everything was. Super clear instructions My 2012 civic oil pan bolt was a 14mm tho
@carlovanrijk4039 Жыл бұрын
jessicamessica, typically the drain bolt for the Honda Civic is a 17 mm if it was from the factory. But an aftermarket drain bolt may have been purchased at an auto-parts store, and that could be why your drain bolt is a 14 mm. Just a thought.
Пікірлер
Watching in 2024, Bro you saved me so much time setting up a full transfer from my 8 year old gaming computer to my new op gaming rig! Thanks for the help!
What size is the crush washer?
I’m just trying to change my hubcaps 😭 I’m used to just being able to pop them off but on my 09 civic it’s held on by lug nuts ☹️ never jacked up a car before
This guy gave me a headake camera was flying every where,good video.
I did the same and disconnected the hose coming for. The converter , I turned on the engine in intervals of 3-4 seconds and making sure to keep adding so it doesn’t run dry
"bottle jack that comes with the car" nope, it is a scissors jack. My small bottle jack is too tall for the usual jack points.
thanks
I just bought a 2011 Civic. I have jacked up cars in the past, but I'm always hesitant on newer vehicles. Thank you!
Bro is the father I never had
Yeah I had a real hard time getting the oil bolt loose. The mechanic also made the oil filter really tight as well. I had a tool though that fits over the end of the filter but even with that it was hard getting it loose. The new filter has a rough surface on that end so you can grip it good for a hand tight. That surface won't allow for the tool.
Amazing video, super informative and straight to the point 🔥🔥🔥 thank you for this content
Really helpful-thank you!
I know it's a older video but man I was pissed today. I just got a 2012 and was going to do the trans fluid. There's so much plastic under this car it doesn't even make sense. I really miss working on my Cobalt SS already. On the balt there are tons of very safe jacking points all over from the K memeber up front to the frame rails and rear sub frame. I've never had a car fall off of a jack and this is the first car it's happened to me on. Lesson learned on this car for sure. Now what I do is use that little spot at the front to lift up the front wheels then I put my steel wheels and 2x4's and sit the car down on the pinch welds there. At least then it has no chance of moving. A bit scary working on this Honda. If I had it my way all that plastic would have to go as well. Anyways thanks for the video.
stellar explanation!
I was almost about to return my jackstands because i could not figure out where the hell you are supposed to jack up a 2010 civic with all of that plastic all over the place.
ty
what do you do with the old oil?
After filling and going to all the R,Nand D like you did. When checking the fluid correct level. Does it need to pass the x x x range? Like does it need to be on hot area of the dip stick?
Never use the jack stands he uses. They have all been recalled for catastauphic failure. Only use the kind that has a solid pin holding their height.
My uncle put the jack stands under the rear control arms. I'm not sure about that?
thx
Thank you for the video
I Love this Little Civic its so underrated But its an excellent tool from honda in terms of reliability. Honda reability at its best
Great video, only change I would suggest is that a honda oil filter is superior to any other brand, their patented system is unmatched by any other filtration system
Does that car have a filter in the transmission?
So far,the best video for how to jack up gen#8 Honda civic.
I don't have a pinch weld on my civic. Is there another jack point I can use to place the jackstands under?
I was always skeptical jacking on the tow hook, and now I'm not thank you.
Great video, thank you!
Craziest part of this is i never had to replace the washer and still havent leaked lol
Just an extra tip I learned from my 300zx that sits low. Get some 2x10 by 3 feet boards (like decking board) and drive the car onto the boards before jacking. This raises the car and makes jacking and inspecting underneath much easier.
Thank you . Used your video along with another an yours gave me the extra techniques to get the job done. Much appreciated.
My next job for my daughter's civic. Trying to teach her how to save doing it yourself!!
Is this bar your lifting on the subframe?
This video was literally more clear then the dealership and my user manual 🤣🤣🤣🤣 Been jacking this car up for 10 years and didn't know about the arrows haha. Usually just use the jack points on the sides, but I needed to get both front tires up at the same time....damn directional tires lol.
Dude just show me the jack points Jesus
My sons car will start shifting harsh and a flush and fill helps. But what really made a HUGE difference is Lucas Transmission fix. I had about 1/4 to 1/2 a bottle and its helps it shift
Can't seem to take off my eyes where your Fuel Air Ratio sensor is located 🤣 I just did mine on 2015 civic si coupe and it was way more work than this civic model of yours.
Had to turn off this vid with the ahs ums ...
know your basics course is just what I needed. Taking it a day at a ti so I can fully grasp the core of soft.
Anyone else get this on their recommendations 10 years later and not even own a windows
Should've filled up the oil filter with oil before installing it. Because now when the oil pump tries to pump the oil then there will be a lapse where the oil pump could be damaged. Also you should've left the drain bolt out and let it drip longer while you changed the filter. New filter goes in first before the drain bolt.
Hola buenas, estoy pensado en comprar un HONDA Civic 2.2 iDTEC Executive diesel, pero mido 1.85 y soy bastante corpulento, estare comodo en el coche? y es fiable este coche?
Hola buenas, estoy pensado en comprar un HONDA Civic 2.2 iDTEC Executive diesel, pero mido 1.85 y soy bastante corpulento, estare comodo en el coche? y es fiable este coche?
Can you use a10w30 synthetic?
what's about the fliter?
Thanks. The 10 cent crush washer cost me $5 at my dealership. The fluid isnt cheap either! But, keeping your Civic well maintained is important. I am doing my fluid every 50k miles.
it's a bag of 5 or 1 washer?
Excellent details!
Question, if the car has over 100k miles do I need to use a different oil than the one on this vid from 7yrs ago?
Thank you! Made it super easy to take care of my oil change and figure out where everything was. Super clear instructions My 2012 civic oil pan bolt was a 14mm tho
jessicamessica, typically the drain bolt for the Honda Civic is a 17 mm if it was from the factory. But an aftermarket drain bolt may have been purchased at an auto-parts store, and that could be why your drain bolt is a 14 mm. Just a thought.