Thanks but mostly only can see the back of your head
@NWilliams9322 күн бұрын
dont have that under my driver seat :( 02 CRV
@GameFrontier-n4f23 күн бұрын
For the passenger side engine mount is there a way to add window weld to that one?
@projectsbyj2523 күн бұрын
@@GameFrontier-n4f no, Not for that side
@BMWi-ow9yx23 күн бұрын
Mine is moving to much
@Tonya47424 күн бұрын
Where are you located? I need a good mechanic for my 2005 Honda CRV.. I noticed you have done a lot of different jobs on CRV’s
@projectsbyj2523 күн бұрын
@@Tonya474 I’m Located in california but I’m not taking in any work at the moment.
@Tonya47423 күн бұрын
@@projectsbyj25 Bummer! If you do please send me a message and let me know. I will most likely be in either the Fresno County area or on the coast near Morro Beach. I’m currently across the country lol
@projectsbyj2523 күн бұрын
@@Tonya474 haha. Will do.
@Kiskassklan24 күн бұрын
I jacked the engine up a few inches and was able to get the tensioner tool socket on the tensioner bolt.
@PearJavier27 күн бұрын
U have the part number for the coils?
@KiskassklanАй бұрын
I've got a 2003 with 195,000 on it and its making that same noise. I'm going to change all that out too. Thanks for the video!
@DragonkingzxАй бұрын
Thanks Boss... Nowadays, It Is Harder To Find Out The Fake Products... Same As The NGK Spark Plug... There Is A Lots Of New Strategies That Are Made By The Fake Makers To Produced The Fake Products To Be Real As Possible... But For NGK Spark Plugs, One Thing That The Fakers Never Changed Are The Clarity Of The Prints On That Ceramic Insulator... The Fake Products Always Print The Words Darker And The Words Also Not Have A Perfect Shape As The Original... Even The Time Had Changed, But This Things Never Changed... Lols..😂
@SuperCRAZYZOMBIEАй бұрын
Yo I’m running into a situation where the inner tie rod end might be too short any chance you can measure you’re old part ?
@projectsbyj25Ай бұрын
@@SuperCRAZYZOMBIE sorry I threw out old piece already. If I get a chance to measure it. I’ll repost onto this comment
@JalapenogoesintightАй бұрын
The back ones were easy smeazie .... The front ones do not come out by design. I'm thinking that a guy can shave a little material off the butt end of the stude.
@ThEMath0ssАй бұрын
Thank you for your reviews about this woofer!!! ✌🏼✌🏼
@filip1997anderssonАй бұрын
just did the rear struts on my 06 crv i can tell you those strut bolts won´t come out this easy i struggled a lot
@louisroth5941Ай бұрын
Do you HAVE to use Locktite or can you skip it?
@projectsbyj25Ай бұрын
I think u should be fine without it.
@louisroth5941Ай бұрын
@@projectsbyj25 okay thanks
@REGALTECH-l7mАй бұрын
Love your videos, want to ask if I can use a Rim 17 tires ?
@REGALTECH-l7mАй бұрын
Love your videos, want to ask if I can use a Rim 17 tires ?
@projectsbyj25Ай бұрын
Yes they should fit. I never personally ran it myself but have ran into others who were running 17’s on their crv
@REGALTECH-l7mАй бұрын
@@projectsbyj25 thanks so much
@perimano1Ай бұрын
I am trying to take out the belt using a 14mm wrench turning the tensioner pulley bolt clockwise as i have seen to so many other videos but still it is so tight it does not even loosen. Did you manage to do it only by jacking up the engine and taking off the mount without messing with the tensioner pulley ?
@projectsbyj25Ай бұрын
That was the only way for me to do it since I didn’t have much room.
@TopdogGameboyАй бұрын
Another video said that the spark plug torque was at 13 I believe. it's in the manual if you have it, he did show it from the manual. Also where did you get the real spark plugs vs the fake
@projectsbyj25Ай бұрын
Real ones from auto store. Fake ones from eBay
@EstoooopidАй бұрын
Who sold you the fake ones??
@projectsbyj25Ай бұрын
Bought off eBay thinking they were real.
@FireinahornАй бұрын
Get the refund from PayPal? What did eBay do? Don't let that seller go.
@1986twlightАй бұрын
I hope just that problem Maybe spark plug lose I just paid off this Honda
@1986twlightАй бұрын
I brought it to get fix there was 3 cylinder there was a too many misfire The check engine when on Wednesday I brought to autozone it said coil and sparks plugs I just got it done last week Do u think it’s there lose And put a gas gasket got fix to and new oxygen sensor
@projectsbyj25Ай бұрын
So after all that, u still have a check engine light on?
@1986twlightАй бұрын
I have Honda 2011
@mds2465Ай бұрын
I have to replace these on my 2005 CR-V as well. Mine is a stick shift so I believe that at least one of the mounts is different on my car compared to the automatics. This is also the same process on a Honda Element as well.
@castillodejuarezАй бұрын
The box on the right is the fake one. I use to run These boxes for NGK on my gluer, and I can clearly see ugly pressure marks on the side of the box.
@gattaka202 ай бұрын
Hello nice video, could you tell me what is that on the dash that will show you mpg ? Thank.s
@projectsbyj252 ай бұрын
That’s a scanguage 2. Hooks up to your obd2 port. I mainly just use it to monitor my water temperature now.
@AgentAle47Ай бұрын
@@projectsbyj25nice, where to get that? I want to monitor my mpg.
@jondoe69262 ай бұрын
i want to replace the fronts only. worried the fronts will never level out with the older rears. People were saying on amazon that these are not the correct height. Sucks something so simple has to be so complicated with such crappy parts.
@nicolasreed80022 ай бұрын
How much did the replacement struts cost?
@projectsbyj252 ай бұрын
I think for the whole set it was like $450 or somewhere close to that amount
@mgbretro2 ай бұрын
How long did these last?
@projectsbyj252 ай бұрын
So far it’s been 3 years since I got these on and I still drive them. They’re still holding solid.
@ajgomez25672 ай бұрын
Do u still have the crv
@projectsbyj252 ай бұрын
Yep. Still my daily
@simonwolfendale7902 ай бұрын
Just purchased this 7023B model, but no logo option and cannot mirror link.
@projectsbyj252 ай бұрын
There’s a whole bunch of different ran programs on there with same model number. if it’s the newer models said like updated, it might not have some features.
@SaulPinacho-dm7ds2 ай бұрын
😂 after you dropped them know you really need to gap them .. good job on the fuel pump
@RamandChevyOwner2 ай бұрын
I got h1 on my aftermarket headlights for my impala.1 problem I came acrosss.My h1 is 1 prong and I see alot of 2 prong.I got another connecter on the left from the headlight bulb mount.Idk if that’s just there for something like the 2 prong h1 or not.Please help Im super confused
@projectsbyj252 ай бұрын
Hmms. From my understanding it should be 2 prong, a positive and negative. Check with the seller u bought it from and make sure it will work with your car
@RamandChevyOwner2 ай бұрын
@@projectsbyj25 ok thank you.I found a adapter that goes from 2 prong to 1 prong
@marioarenas-le7ee2 ай бұрын
If just cut the belt?
@Eddie650012 ай бұрын
Excellent video i have the same crv with rear bottomed out. Ill be doing this asap. Thank you. Well done
@MrD-wr6ej2 ай бұрын
Yes... I feel the same situation.. Its about a month I had been use .. When running at about more 80mph.. my car jerk and lost power.. and even I throttle more .. it won't go.. But starting morning.. even during after warmup engine no problem for starting.. I buy new spark plug.. when I unplug this one.. the sharp shape become same as the video... Truly shock to see it Then I realise this fake one..!!
@robgehring97202 ай бұрын
Thank you for the video. Your instruction was perfect. Tightening the brake cable worked and was straighforward. You saved me $150+
@Adrian21402 ай бұрын
If you plug in a HDD to the USB is it gonna recognize it and play the media? Thanks for the content.
@projectsbyj252 ай бұрын
I haven’t tried it so I can’t say for sure if it will work or not
@therealitskai46682 ай бұрын
U can chat nf get to the point
@mopar2ya1653 ай бұрын
To bleed brakes, you have a person push the brake down, then you open the bleed until peddle goes down, then close the bleed and release brake. Repeat until no air bubbles and clean fluid in hose. Check resevour every 10 openings and add as needed.
@HenryRs3 ай бұрын
After one year how does it feel compared to oem? Still in good shape?
@projectsbyj253 ай бұрын
I think nothing will be as good as oem but these ones are still fine. They’re stiffer than oem but so far so good.
@Leader2light3 ай бұрын
That's wild how many upgrades you done. Very nice.
@Leader2light3 ай бұрын
Put all LED on my 04 CRV. Well worth it.
@Leader2light3 ай бұрын
Thanks for the video. For sure watch out for fake crap!
@duanechimoni66093 ай бұрын
I did the rears and had to unbolt the control arm, loosen brake line brackets. Driver side had to make sure not to damage the vent canister. The passenger side was another story. I had to cut & grind off the lower bolt. Then I purchased a 14mm x 77 bolt at Tractor Supply to replace the broken lower bolt. but it was worth it to replace the old leaking & rusted struts.
@theboris55663 ай бұрын
I've been having the same problem with my 03 honda crv. i have codes for all cylinders miss firing and a code for random miss fire, i've tried replacing coil packs and spark plugs ( cheap ones). and i'm still having miss fires and idle issue. do you think it's because i used cheap spark plugs? I just don't want to go out and buy those expensive ones and it not work.
@projectsbyj253 ай бұрын
i would just spend the money on the expensive parts and get it from the auto store. In that case if it doesnt work out, you can always return it to the store and get a refund.
@1986twlightАй бұрын
The problem started on I would say Wednesday the light went back on And the car sign with slippery sign on it to
@1986twlightАй бұрын
So I brought it back to the mechanic on Thursday. They still haven’t looked at my car yet because they’ve been so swamped over there with other cars.
@1986twlightАй бұрын
I just hope a loose spark plug or something there’s a warranty on it a year warranty. I wouldn’t have to pay anything.
@projectsbyj25Ай бұрын
@@1986twlight let’s hope that’s the case and they just take care of everything.
@mr.sept.57903 ай бұрын
Fake ones are erodium tip😂
@Matt-rq6wz3 ай бұрын
Highly recommend the alternative method of going from the passenger wheel-well. Especially if you have a 1/2 impact. The water pump is easily accessible from here once the crank pulley is removed. A great time to replace the crank seal too. It’s nice to have a set of long boy ratcheting wrenches not required.
@Justin-412-Brown3 ай бұрын
Trash hook up
@claudebailey1123 ай бұрын
You dont need to remove the engine mount either ,just the power steering pump ,the over flow bottle,the radiator fan and the front grill then the radiator holder brackets.
Пікірлер
Thanks for showing this
Thanks but mostly only can see the back of your head
dont have that under my driver seat :( 02 CRV
For the passenger side engine mount is there a way to add window weld to that one?
@@GameFrontier-n4f no, Not for that side
Mine is moving to much
Where are you located? I need a good mechanic for my 2005 Honda CRV.. I noticed you have done a lot of different jobs on CRV’s
@@Tonya474 I’m Located in california but I’m not taking in any work at the moment.
@@projectsbyj25 Bummer! If you do please send me a message and let me know. I will most likely be in either the Fresno County area or on the coast near Morro Beach. I’m currently across the country lol
@@Tonya474 haha. Will do.
I jacked the engine up a few inches and was able to get the tensioner tool socket on the tensioner bolt.
U have the part number for the coils?
I've got a 2003 with 195,000 on it and its making that same noise. I'm going to change all that out too. Thanks for the video!
Thanks Boss... Nowadays, It Is Harder To Find Out The Fake Products... Same As The NGK Spark Plug... There Is A Lots Of New Strategies That Are Made By The Fake Makers To Produced The Fake Products To Be Real As Possible... But For NGK Spark Plugs, One Thing That The Fakers Never Changed Are The Clarity Of The Prints On That Ceramic Insulator... The Fake Products Always Print The Words Darker And The Words Also Not Have A Perfect Shape As The Original... Even The Time Had Changed, But This Things Never Changed... Lols..😂
Yo I’m running into a situation where the inner tie rod end might be too short any chance you can measure you’re old part ?
@@SuperCRAZYZOMBIE sorry I threw out old piece already. If I get a chance to measure it. I’ll repost onto this comment
The back ones were easy smeazie .... The front ones do not come out by design. I'm thinking that a guy can shave a little material off the butt end of the stude.
Thank you for your reviews about this woofer!!! ✌🏼✌🏼
just did the rear struts on my 06 crv i can tell you those strut bolts won´t come out this easy i struggled a lot
Do you HAVE to use Locktite or can you skip it?
I think u should be fine without it.
@@projectsbyj25 okay thanks
Love your videos, want to ask if I can use a Rim 17 tires ?
Love your videos, want to ask if I can use a Rim 17 tires ?
Yes they should fit. I never personally ran it myself but have ran into others who were running 17’s on their crv
@@projectsbyj25 thanks so much
I am trying to take out the belt using a 14mm wrench turning the tensioner pulley bolt clockwise as i have seen to so many other videos but still it is so tight it does not even loosen. Did you manage to do it only by jacking up the engine and taking off the mount without messing with the tensioner pulley ?
That was the only way for me to do it since I didn’t have much room.
Another video said that the spark plug torque was at 13 I believe. it's in the manual if you have it, he did show it from the manual. Also where did you get the real spark plugs vs the fake
Real ones from auto store. Fake ones from eBay
Who sold you the fake ones??
Bought off eBay thinking they were real.
Get the refund from PayPal? What did eBay do? Don't let that seller go.
I hope just that problem Maybe spark plug lose I just paid off this Honda
I brought it to get fix there was 3 cylinder there was a too many misfire The check engine when on Wednesday I brought to autozone it said coil and sparks plugs I just got it done last week Do u think it’s there lose And put a gas gasket got fix to and new oxygen sensor
So after all that, u still have a check engine light on?
I have Honda 2011
I have to replace these on my 2005 CR-V as well. Mine is a stick shift so I believe that at least one of the mounts is different on my car compared to the automatics. This is also the same process on a Honda Element as well.
The box on the right is the fake one. I use to run These boxes for NGK on my gluer, and I can clearly see ugly pressure marks on the side of the box.
Hello nice video, could you tell me what is that on the dash that will show you mpg ? Thank.s
That’s a scanguage 2. Hooks up to your obd2 port. I mainly just use it to monitor my water temperature now.
@@projectsbyj25nice, where to get that? I want to monitor my mpg.
i want to replace the fronts only. worried the fronts will never level out with the older rears. People were saying on amazon that these are not the correct height. Sucks something so simple has to be so complicated with such crappy parts.
How much did the replacement struts cost?
I think for the whole set it was like $450 or somewhere close to that amount
How long did these last?
So far it’s been 3 years since I got these on and I still drive them. They’re still holding solid.
Do u still have the crv
Yep. Still my daily
Just purchased this 7023B model, but no logo option and cannot mirror link.
There’s a whole bunch of different ran programs on there with same model number. if it’s the newer models said like updated, it might not have some features.
😂 after you dropped them know you really need to gap them .. good job on the fuel pump
I got h1 on my aftermarket headlights for my impala.1 problem I came acrosss.My h1 is 1 prong and I see alot of 2 prong.I got another connecter on the left from the headlight bulb mount.Idk if that’s just there for something like the 2 prong h1 or not.Please help Im super confused
Hmms. From my understanding it should be 2 prong, a positive and negative. Check with the seller u bought it from and make sure it will work with your car
@@projectsbyj25 ok thank you.I found a adapter that goes from 2 prong to 1 prong
If just cut the belt?
Excellent video i have the same crv with rear bottomed out. Ill be doing this asap. Thank you. Well done
Yes... I feel the same situation.. Its about a month I had been use .. When running at about more 80mph.. my car jerk and lost power.. and even I throttle more .. it won't go.. But starting morning.. even during after warmup engine no problem for starting.. I buy new spark plug.. when I unplug this one.. the sharp shape become same as the video... Truly shock to see it Then I realise this fake one..!!
Thank you for the video. Your instruction was perfect. Tightening the brake cable worked and was straighforward. You saved me $150+
If you plug in a HDD to the USB is it gonna recognize it and play the media? Thanks for the content.
I haven’t tried it so I can’t say for sure if it will work or not
U can chat nf get to the point
To bleed brakes, you have a person push the brake down, then you open the bleed until peddle goes down, then close the bleed and release brake. Repeat until no air bubbles and clean fluid in hose. Check resevour every 10 openings and add as needed.
After one year how does it feel compared to oem? Still in good shape?
I think nothing will be as good as oem but these ones are still fine. They’re stiffer than oem but so far so good.
That's wild how many upgrades you done. Very nice.
Put all LED on my 04 CRV. Well worth it.
Thanks for the video. For sure watch out for fake crap!
I did the rears and had to unbolt the control arm, loosen brake line brackets. Driver side had to make sure not to damage the vent canister. The passenger side was another story. I had to cut & grind off the lower bolt. Then I purchased a 14mm x 77 bolt at Tractor Supply to replace the broken lower bolt. but it was worth it to replace the old leaking & rusted struts.
I've been having the same problem with my 03 honda crv. i have codes for all cylinders miss firing and a code for random miss fire, i've tried replacing coil packs and spark plugs ( cheap ones). and i'm still having miss fires and idle issue. do you think it's because i used cheap spark plugs? I just don't want to go out and buy those expensive ones and it not work.
i would just spend the money on the expensive parts and get it from the auto store. In that case if it doesnt work out, you can always return it to the store and get a refund.
The problem started on I would say Wednesday the light went back on And the car sign with slippery sign on it to
So I brought it back to the mechanic on Thursday. They still haven’t looked at my car yet because they’ve been so swamped over there with other cars.
I just hope a loose spark plug or something there’s a warranty on it a year warranty. I wouldn’t have to pay anything.
@@1986twlight let’s hope that’s the case and they just take care of everything.
Fake ones are erodium tip😂
Highly recommend the alternative method of going from the passenger wheel-well. Especially if you have a 1/2 impact. The water pump is easily accessible from here once the crank pulley is removed. A great time to replace the crank seal too. It’s nice to have a set of long boy ratcheting wrenches not required.
Trash hook up
You dont need to remove the engine mount either ,just the power steering pump ,the over flow bottle,the radiator fan and the front grill then the radiator holder brackets.