Follow me and me adventures with HOSS! 1999 Chevy Camaro SS SLP Is this the world’s first L8T 6.6L Gen V swapped 4th gen Camaro??? Hugger Orange 1 of 19 (out of 375 HOSS Cars) Instagram.com/hossgarage MERCH: www.hossgarage.com
Why not just install a 1/2 inch spacer on your motor mounts to be sure that the intake will not hit the glass or sheet metal surrounding the glass?
@ras4782Ай бұрын
I love it
@javieradamez197Ай бұрын
Where did you get those exhaust hangers for the rear?
@bigadielldne7234Ай бұрын
A stock l8t block,crank can handle 3K+ hp
@HOSSgarageАй бұрын
You know the deal!👍🫡
@llll_IIII_IIIIIАй бұрын
I wanna do this to my yukon. I love my yukon not the fuel milage
@dfernandez3410Ай бұрын
“your good at how to videos!.” yup i agree with the camera man
@pastorofmuppets23492 ай бұрын
Just ordered one. Can't wait
@HOSSgarage2 ай бұрын
Love the name!
@marcmo71382 ай бұрын
The rest of the car is red. There's your problem.
@HOSSgarage2 ай бұрын
Camera makes it look red.. that’s the curse Of hugger orange
@marcmo71382 ай бұрын
So do you have to block off the direct injection ports in the head? If you mentioned it I missed it.
@HOSSgarage2 ай бұрын
I did in a previous bideo
@gasparsperformance98412 ай бұрын
I thought that a honda k10 since all i could see is 2 cylinders
@spicytuna623 ай бұрын
Let the crybabies cry. Not their car. This is sick.
@jonathangomez49963 ай бұрын
Subscribe after i seen its at 24z3 u don’t really see builds on that engine
@Iseekoutthetrails3 ай бұрын
I Was Thinking Of Doing This To A Jeep Liberty.
@Ballen11823 ай бұрын
Nice track 👌🎵
@NoSoyYo-TV3 ай бұрын
I wish I had a dad like you .😂
@SpeeeedyG3 ай бұрын
This exhaust is probably the best sounding exhaust you can find. BUT- the drone is the worst in the market. Second, the exhaust fumes DO enter the cab. Especially on long trips.
@ShawnGilbert19673 ай бұрын
I cannot find the video where he put a cam in it? Anyone know what cam he used?
@rfrank19803 ай бұрын
So all this for 250ftlbs of torque in a 3300lb car? Even gutted you're looking at a sub 2700-2800lb car. Would've been far better in a Chevette or Miata
@HOSSgarage3 ай бұрын
You’re right! There’s a guy on Instagram lunchbox605 who put one in a chevette. I took Honda engine out and now have the New L8T 6.6L v8.
@jaxjax53223 ай бұрын
You don’t have too change the cam? For delete all the dod or afm or that crab?
@HOSSgarage3 ай бұрын
No the LT 6.6 L does not come with arm or DOD factory. so you don’t have to change the cam you can but you don’t have to if you just lock out the VVT solenoid.
@odysseyz_3 ай бұрын
How long did this take??
@HOSSgarage3 ай бұрын
Took me about an hour to get it out
@odysseyz_3 ай бұрын
@@HOSSgarage not bad! Thanks! I’m currently in the same process!
@grimmreaper66393 ай бұрын
What did you use for motor mounts?
@HOSSgarage3 ай бұрын
Homemade with some plates and energy mounts
@grimmreaper66393 ай бұрын
@@HOSSgarage do you happen to have any schematics or any dimensions I could use to replicate this?
@Sebastian-qq9tt4 ай бұрын
"PromoSM" 😬
@aldoortega21704 ай бұрын
OMG!!!!!! I’m in love ❤❤❤❤ that’s a beast!
@HOSSgarage4 ай бұрын
Thanks!
@aldoortega21704 ай бұрын
Holy moley 120 lb so not a daily driver
@gilbertosoto97534 ай бұрын
I need a super charger for my Dodge. Then I will be tearing some ass.
@Ray956Texas4 ай бұрын
Mine getting build right now 😊
@dylanrice67074 ай бұрын
I want one of these for my 08 silverado crew cab im tired of the slow ass 5.3
@HOSSgarage4 ай бұрын
It’s the perfect upgrade. You can covert it from direct injection to regular port fuel injection and it will be the best upgrade. It’s already non AFM and non DOD from factory
@JohnBelknap4 ай бұрын
Are you going to put the battery in the back too?
@HOSSgarage4 ай бұрын
I think so. I just saw a “NHRA legal” battery box with cables for sale at the UPR trailer for $140 but found it online for half the price. Soooo….. 😂
@jq83574 ай бұрын
🎉🎉🎉🎉🎉
@AbstractDreamz4 ай бұрын
EV6 injectors? 10:10
@HOSSgarage4 ай бұрын
Yes for now until I get real deal standalone that can run the Holley low impedance injectors I have .
@HOSSgarage4 ай бұрын
Hit the like button! 🎉🎉
@leejohnson93384 ай бұрын
Lets go. I was just wandering if anyone has done this.
@HOSSgarage4 ай бұрын
Somebody had to do it 😉 Thanks for stopping by!
@tonywissler57584 ай бұрын
Wrench free brother! We will check out videos when they are available . 😂
@HOSSgarage4 ай бұрын
Thanks for your support!!!
@DatgringolocoАй бұрын
Any update? How is life?
@JohnBelknap4 ай бұрын
Man I need 3-4 videos a day lol
@HOSSgarage4 ай бұрын
I just need to do my own Truman Show livestream 24/7
@JohnBelknap4 ай бұрын
That could be scary but might pay for the build lol@@HOSSgarage
@chriscothran24664 ай бұрын
I’m trying to figure out why u didn’t just tilt the trans forward
@HOSSgarage4 ай бұрын
Bro as soon as I watched the video it hit me like a ton of bricks…. Sometimes I get tunnel vision 😆
@jq83574 ай бұрын
👍 👍 nice
@HOSSgarage4 ай бұрын
Thanks 🙏
@HOSSgarage4 ай бұрын
Male sure you hit the LIKE button it really helps out!
@jq83574 ай бұрын
🎉🎉🎉❤
@cartailincautodetailing9464 ай бұрын
Did u ever finish the K swap Camaro
@HOSSgarage4 ай бұрын
Finished and stopped immediately when it was going to take another 15k to make it faster than a stock Camaro. Just didn’t make sense financially.
@chrisstavro46984 ай бұрын
When is first fire?
@HOSSgarage4 ай бұрын
Soon. My next video goes over what is needed to make it happened. Should be live Monday night 8pm
@chrisstavro46984 ай бұрын
@@HOSSgarage Sweet!
@Kingcadillac8165 ай бұрын
Did i miss what u did for the oil pick up
@HOSSgarage5 ай бұрын
The oil pick up tube is cast into the pan. It being part of the pan makes it to where there is no more tube to bolt up. Just an oval seal between the oil pump and the pan
@nickr66765 ай бұрын
That orange on the door might look closer with some clear coat on it, might as well give that a shot
@HOSSgarage5 ай бұрын
It’s possible, I just don’t wanna waste a can of 2k clear of it ain’t lol
Пікірлер
Bro, how's it going?
U can fit another one in front of that one
Why not just install a 1/2 inch spacer on your motor mounts to be sure that the intake will not hit the glass or sheet metal surrounding the glass?
I love it
Where did you get those exhaust hangers for the rear?
A stock l8t block,crank can handle 3K+ hp
You know the deal!👍🫡
I wanna do this to my yukon. I love my yukon not the fuel milage
“your good at how to videos!.” yup i agree with the camera man
Just ordered one. Can't wait
Love the name!
The rest of the car is red. There's your problem.
Camera makes it look red.. that’s the curse Of hugger orange
So do you have to block off the direct injection ports in the head? If you mentioned it I missed it.
I did in a previous bideo
I thought that a honda k10 since all i could see is 2 cylinders
Let the crybabies cry. Not their car. This is sick.
Subscribe after i seen its at 24z3 u don’t really see builds on that engine
I Was Thinking Of Doing This To A Jeep Liberty.
Nice track 👌🎵
I wish I had a dad like you .😂
This exhaust is probably the best sounding exhaust you can find. BUT- the drone is the worst in the market. Second, the exhaust fumes DO enter the cab. Especially on long trips.
I cannot find the video where he put a cam in it? Anyone know what cam he used?
So all this for 250ftlbs of torque in a 3300lb car? Even gutted you're looking at a sub 2700-2800lb car. Would've been far better in a Chevette or Miata
You’re right! There’s a guy on Instagram lunchbox605 who put one in a chevette. I took Honda engine out and now have the New L8T 6.6L v8.
You don’t have too change the cam? For delete all the dod or afm or that crab?
No the LT 6.6 L does not come with arm or DOD factory. so you don’t have to change the cam you can but you don’t have to if you just lock out the VVT solenoid.
How long did this take??
Took me about an hour to get it out
@@HOSSgarage not bad! Thanks! I’m currently in the same process!
What did you use for motor mounts?
Homemade with some plates and energy mounts
@@HOSSgarage do you happen to have any schematics or any dimensions I could use to replicate this?
"PromoSM" 😬
OMG!!!!!! I’m in love ❤❤❤❤ that’s a beast!
Thanks!
Holy moley 120 lb so not a daily driver
I need a super charger for my Dodge. Then I will be tearing some ass.
Mine getting build right now 😊
I want one of these for my 08 silverado crew cab im tired of the slow ass 5.3
It’s the perfect upgrade. You can covert it from direct injection to regular port fuel injection and it will be the best upgrade. It’s already non AFM and non DOD from factory
Are you going to put the battery in the back too?
I think so. I just saw a “NHRA legal” battery box with cables for sale at the UPR trailer for $140 but found it online for half the price. Soooo….. 😂
🎉🎉🎉🎉🎉
EV6 injectors? 10:10
Yes for now until I get real deal standalone that can run the Holley low impedance injectors I have .
Hit the like button! 🎉🎉
Lets go. I was just wandering if anyone has done this.
Somebody had to do it 😉 Thanks for stopping by!
Wrench free brother! We will check out videos when they are available . 😂
Thanks for your support!!!
Any update? How is life?
Man I need 3-4 videos a day lol
I just need to do my own Truman Show livestream 24/7
That could be scary but might pay for the build lol@@HOSSgarage
I’m trying to figure out why u didn’t just tilt the trans forward
Bro as soon as I watched the video it hit me like a ton of bricks…. Sometimes I get tunnel vision 😆
👍 👍 nice
Thanks 🙏
Male sure you hit the LIKE button it really helps out!
🎉🎉🎉❤
Did u ever finish the K swap Camaro
Finished and stopped immediately when it was going to take another 15k to make it faster than a stock Camaro. Just didn’t make sense financially.
When is first fire?
Soon. My next video goes over what is needed to make it happened. Should be live Monday night 8pm
@@HOSSgarage Sweet!
Did i miss what u did for the oil pick up
The oil pick up tube is cast into the pan. It being part of the pan makes it to where there is no more tube to bolt up. Just an oval seal between the oil pump and the pan
That orange on the door might look closer with some clear coat on it, might as well give that a shot
It’s possible, I just don’t wanna waste a can of 2k clear of it ain’t lol