Interesting reading the comments and how some people are like it’s a Sequoia and will never be used as an off roader . I have a 2019 Sequoia and it spends lots of time off road and loves it . I’ve had 6 Tacomas , 4 Tundras , and FJ-40 and hands down the Sequoia is my favorite. Looked at the new sequoias and am not sold on the way the cargo area is , with the hybrid system it does not lay down flat and storage is an issue. Thanks for sharing yours
@dillansgarage19 сағат бұрын
Toms Sequoia is setup really nice and he actually uses it. It’s funny how people have to try and tell you your own business lol either way it’s a cool rig, just not for everyone.
@bassfishing7249Күн бұрын
Awesome vid, just wondering if its really noisy with all that movement and if there is any way to get rid of all that movement??
@dillansgarage18 сағат бұрын
Thank you! Are you referring to the way bumper separate from the body? If so, that’s just how it is. It does that with the stock bumper too, you just can’t see it cause the plastic flexes with the movement.
@bassfishing724918 сағат бұрын
@@dillansgarage ok awesome thank you, I also was just wanting to make sure would thing bumper work with a 2003 4th gen v6?
@dillansgarage18 сағат бұрын
@@bassfishing7249 it would work on yours basically the same as mine. The only thing that would be different is you need fog lights with turn signals built into them so you can wire your oem turn signal harness. I have a link for yours in the description also
@bassfishing724918 сағат бұрын
@@dillansgarage thank you very much love the vids keep up the great work
@dillansgarage18 сағат бұрын
@@bassfishing7249 thank you! Means a lot to me thank you. Posting has been slow the last couple months because we just moved and there’s been a lot going on. But I’m about to kick it into gear again
@ZAPP9Күн бұрын
Great learning lessons. I appreciate your humble video. Great work, Yo.
@dillansgarageКүн бұрын
Thank you. I really enjoyed this one and learned a ton from it. I’m glad you enjoyed the video! Thank you for the comment!
@raulcaba5552Күн бұрын
Roll on truck bed liner also works great as a ghetto roof coating. Lots of stuff does as long as it has UV resistance.
@dillansgarageКүн бұрын
Nice. I have used bedliner for a lot of stuff, but nothing that has gone on as thick and strong as this liquid rubber.
@bandoleroarmory51142 күн бұрын
What is the best way to order an extra set of brackets ?
@dillansgarage2 күн бұрын
I would hit up Hooke Road on the website and send an email or send a message on IG
@halucinator13 күн бұрын
One thing you didn't mention was switching out the mineral oil that was commonly used for r12 systems to PAG oil. Good video overall though.
@dillansgarage2 күн бұрын
Good call! Thank you!
@justinpage27123 күн бұрын
Thanks!
@dillansgarage2 күн бұрын
Holy smokes!! My first super thanks! Thank you so much!
@MatsoGomez4 күн бұрын
That is an awesome discovery. It looks awesome dude , that coming from an old timer looks great
@dillansgarage4 күн бұрын
Thank you! Glad you like it. I really enjoyed that bumper. I ended up getting another one from that same company but one with a winch mount. Did you see that video?
@JamesCardenasMyinsuranceguy5 күн бұрын
Does a 2 wheel drive 5th gen 4Runner have cv axels in the front? I’ve had multiple mechanics tell me I don’t have cv Axels in the front.
@dillansgarage5 күн бұрын
That’s correct. CV axles are only for 4wd IFS vehicles. The only thing somewhat related to this would be to check your wheel bearing, but those don’t usually go bad with normal use. Our 4runner front bearings are designed to last the life of the vehicle. That said I changed my around 140,000 miles cause they were shot.
@JamesCardenasMyinsuranceguy5 күн бұрын
@@dillansgarage here’s something I found online . Pretty much what I’m experiencing. A finger-snapping, popping or clicking sound when you turn What it means: If you have a front-wheel-drive or all-wheel drive vehicle and hear this sound when you turn or corner (but the noise stops when you drive straight)
@dillansgarage5 күн бұрын
@@JamesCardenasMyinsuranceguy I would get under there and check every bolt. Tighten everything. Brakes, ball joints, bushings. Could be worn out bushings or ball joint that need replaced. I’ve replace ball joints twice in the last 7 years, but I also work my truck more. What year is your 4r?
@JamesCardenasMyinsuranceguy5 күн бұрын
@@dillansgarage 2015. Thank you
@chevysizemore80356 күн бұрын
Great video! Only thing that could be better about it is if you said what the socket sizes were.
@dillansgarage6 күн бұрын
Thank you! Appreciate the compliment and feedback, but I can't make it tooooo easy for y'all. Right?
@chevysizemore80355 күн бұрын
@@dillansgarage but you could have saved me a total of 23 seconds! lol
@dillansgarage5 күн бұрын
@@chevysizemore8035 😂 you have a point there!
@rustypugh1236 күн бұрын
Good video boss, but please don’t advise people to use head gasket sealer. Remember, what seals up the leak in your head gasket will seal up other things as well.
@dillansgarage6 күн бұрын
There’s a difference between chemical bonds and physical sealants. I agree with you about physical sealants like stop leak
@rustypugh1236 күн бұрын
@@dillansgarage I wasn’t trying to say you were wrong or anything, it’s just that I had an experience with trying to use some sealant and it gunk up my thermostat and radiator and everything. Maybe you can help me I have a 2009 Nissan frontier with a 4.0 V6. To make a really long story short, I’m pretty sure that I have a leaking head gasket. It’s a very very slow leak. I only have to add coolant about every two or three weeks or so and even then it’s only just a little bit of coolant. The problem I have is that if I put a load on the motor like hauling a trailer, it immediately gets hot. So my question is what type of sealer would you recommend because at this point I’m willing to try anything because I’m looking at having to buy another motor because I’m not going to spend $3000 to get the head gasket fixed. The truck has 211,000 miles. Thanks any help is really appreciated.
@dillansgarage6 күн бұрын
@@rustypugh123 I have used blue devil, not the pour-n-go one, multiple times and never had any symptoms of gunk build up. It’s always been super clear. Follow the directions carefully with the blue devil and do it correctly.
@rustypugh1236 күн бұрын
@@dillansgarage thanks I appreciate it
@dillansgarage6 күн бұрын
@@rustypugh123 anytime. I have an old KZread channel that’s not mine anymore called Trail Bender Overland. Those videos are still live and I made a detailed how-to use blue devil on there.
@bnorris53987 күн бұрын
Installing mine now. That bracket you left off goes in the inside of the frame. So basically that bracket and the bumper sandwich the rear frame. I also picked up a license plate bracket that will attach to one of the locations for the D-ring mount. I don’t have parking sensors so I left the rubber covers on. I have Hooke Road front bumper and tube doors so this goes well with the other accessories.
@dillansgarage6 күн бұрын
Whoa. Why the heck didn’t I think of that. Now that you mention it, it seems so obvious. Thank you for sharing. Can you share the license plate holder link?
@bbrahbboul27487 күн бұрын
I bought tge same kit ,nit doesnt seem to suck anything. The ball just stays deflated . Ir i am doing something wrong ?
@dillansgarage7 күн бұрын
Strange. Is the tip of the nozzle dipped in coolant?
@bbrahbboul27487 күн бұрын
@@dillansgarage nope nowhere close . Even just doing it in open air . It doesn't seem to suck anything. I tried even to blow air through the nozzle I couldn't force any air into it . I am thinking the valve is defective. I hate to return it but I have to .
@changuanboondavid65538 күн бұрын
Hi there, what size are the torx bolts that come with the steps? Are they T55 as well?
@dillansgarage18 сағат бұрын
Aw man. I’m sorry I don’t remember but I think so. I don’t have the jeep with me anymore to check
@erikmcclure638110 күн бұрын
Interesting way to get likes…
@dillansgarage10 күн бұрын
Most KZreadrs do what they can to gain metrics. That said, I don’t make useless shorts like this anymore. Here’s the full video if you’re interested: Square body Chevy and GMC Blower Fan $30 Upgrade - How to kzread.info/dash/bejne/Y6eIvI-zdqrUj9I.html
@OLANADVMX11 күн бұрын
A day later, this guy has another 4runner. Hahahahaha
@dillansgarage11 күн бұрын
Wut?
@dillansgarage10 күн бұрын
I’ve always had the same 4Runner. I don’t understand the comment lol
@BobKenge11 күн бұрын
Wow. Nice work fixing those tabs. How’s been the alignment so far? I’m evaluating to buy one of those bison cambolts. Thanks for sharing
@dillansgarage11 күн бұрын
Alignment has been rock solid ever since this install. Super super happy with them. Fixing the tabs was a must. The bison tabs or taco tabs are for sure the way to go
@NoknOnDors12 күн бұрын
Prefer a cable to drive by wire any day. I can fix a normal cable throttle with random crap anywhere any time. If your drive by wire pedal or throttle plate stepper motor dies, you're screwed
@dillansgarage10 күн бұрын
There’s definitely pros and cons to each. I own carb and EFI trucks. I enjoy them both
@NullValue-oc9ch12 күн бұрын
Deez nuts worked well. Ty for that. Made mah day
@dillansgarage10 күн бұрын
Heck yeah haha anytime my friend
@driftless187013 күн бұрын
Beautiful build!
@dillansgarage13 күн бұрын
Thank you!
@JordanSheppardMusic14 күн бұрын
Thank you sir. 🤘
@dillansgarage2 күн бұрын
You’re welcome! Happy to help. Thank you!
@fuxbox17 күн бұрын
Im having a hard time figuring out if this would look stupid on stock ride height. Some drunk pos hit n run my v8 baby 😢
@dillansgarage17 күн бұрын
I definitely don’t think it’d look bad on a stock rig. If you’re running smooth looking road tires might not fully match the vibe. But I still think it’d look better over stock
@photofermata18 күн бұрын
You gave me the confidence to do this… twice. After installing it and doing the battery reset, it didn’t work! I realized I missed that step of plugging it into the connector, so I had to remove the interior pieces again to get to it. My mistake, not yours. Overall, an easy repair because of your great instructions. One more thing, I made damned sure I had my 10mm socket prior to doing anything. 😂
@dillansgarage18 күн бұрын
Ha! I’ve made mistakes exactly like that too many times. Good work not letting that 10mm walk away! There’s a dark place where they escape to. Glad you got the job done.
@Impala-qp9cb18 күн бұрын
Keep paint factory. Classic 80s two tone
@dillansgarage2 күн бұрын
I think you’ll like what we did with it
@AC-rf1ud19 күн бұрын
In 1975 I worked for Holly Carburetor in a factory where we made those pumps. My job was to make the hub that connected the pulley to the pump. Three holes were drilled, tapped and chamfered, four at a time in a stationary milling machine where the center rotated to each milling head to preform each task. I entertained myself by seeing how many I could make during each shift. I don’t remember the number but I broke the machine more than once!
@dillansgarage2 күн бұрын
Thank you for sharing the story!! Love hearing about everyone’s experiences in the industry
@bobbysvt785319 күн бұрын
My tester leaks all the blue fluid
@dillansgarage19 күн бұрын
Brutal! Sorry to hear. Did you overfill it?
@bobbysvt785318 күн бұрын
No I filled it to the line.it imminently started leaking the fluid.
@_WADE13x20 күн бұрын
A week for the winch video, it's been 6 months
@dillansgarage19 күн бұрын
It’s been a really gnarly 6 months and had to get a lot of content done for other partners. The which mounting seemed easy enough that it wasn’t the highest priority. Then we moved to a new place and has a run down shop I’m in high gear to get fixed up so I can continue shooting content.
@dillansgarage19 күн бұрын
Did you see that the short I linked as a card during the winch portion of the video
@_WADE13x19 күн бұрын
@@dillansgarage Do you think the bumper is strong enough for the full force of the winch? I'm thinking of buying one. Just unsure if it's strong enough.
@kimnewcom23 күн бұрын
The best looking large suv. Would’ve bought it if it wasn’t the cargo space/3rd row.
@dillansgarage23 күн бұрын
Definitely a great looking truck!
@mikekuczynski155218 сағат бұрын
I’m with you on that , I have a 2019 folds flat to the front seat . Don’t know what they were thinking:-(
@dillansgarage18 сағат бұрын
@@mikekuczynski1552 I’m going to total opposite direction with my own vehicles. Until I win the lottery I’m only driving older trucks from now on, vehicles I can actually work on.
@mikekuczynski155217 сағат бұрын
@@dillansgarage I’m a mechanic also that’s why I by Toyotas so I don’t have to work on them in my spare time
@user-is3jb7bc3l24 күн бұрын
nice vid, Does replacing rear axle seal has similar procedure?
@dillansgarage24 күн бұрын
I haven’t done that yet. Im sure there’s similarities, but being a solid axle will be its own process. Most axles seals are somewhat straight forward to replace
@MIDLANDER3125 күн бұрын
My wife dailys a 1989 burb.
@dillansgarage25 күн бұрын
Your wife is rad
@MIDLANDER3125 күн бұрын
@dillansgarage yea she's pretty alright. When I met her she was driving a 1993 Blazer. 2nd to the last year of the full size k5 blazer name plate before they went to Tahoe. Needless to say it was love at first sight. So I got her a squarebody suburban and let her start filling it will kids!!! Lol
@nordicpride970825 күн бұрын
I’ll give you all a gold nugget…. Only use OEM cv shafts!!!!!! Get low mileage ones or have yours rebuilt. 5th gen 4runner axles fit the 4th gen and have a superior boot design. Also, there is no difference between the V6/V8, exact same axle! ****ALWAYS use the Toyota tool to install new diff seals. Don’t want to drop the coin on an actual Toyota tool? A guy on Etsy sells 3D printed hard plastic replicas for $20. You’re welcome
@dillansgarage21 күн бұрын
I appreciate your input. 30k miles later and the cv I installed and the seals are great still. We’ll see how long they last
@velocity80026 күн бұрын
what size wheels and tires are those?
@dillansgarage26 күн бұрын
The wheels are ProComp 89 series 17” The tires were General Tire ATX 33”x10.5” But I’m really enjoying my new Kenda Klever R/T. I’ll mostly likely be sticking with these.
@leogetsome26 күн бұрын
What’s a good lube of choice to help with the hinges
@dillansgarage26 күн бұрын
I use what ever I have on hand. white lithium grease or even just straight engine oil
@stacyman128526 күн бұрын
Im glad yall happy with the mom burb /family member an congratulations on the lil one to come .
@dillansgarage26 күн бұрын
Thank you! Baby girl is 7 months now and life is good
@avtomatkalashnikova938828 күн бұрын
I just start rebuilding an 86 GMC Suburban. The real Steel. Pretty much same colour and Barn Door too.
@dillansgarage28 күн бұрын
So awesome. They’re such awesome trucks. I love that we actually CAN rebuild them. I’m so over new trucks.
@andresh1628 күн бұрын
Link
@dillansgarage28 күн бұрын
Here’s the first one I did, same as in this reel TRENDING: $400 4th Gen 4Runner Offroad Steel Bumper kzread.info/dash/bejne/ZKuMzZanZLO_n5M.html
@dillansgarage28 күн бұрын
Here’s the winch bumper a did later $500 4th Gen 4Runner Offroad Steel Winch Bumper kzread.info/dash/bejne/eHV8s6mld9m7YLw.html
@romerocarlos1992Ай бұрын
Any idea what’s the part number for the “ spindle axle seal” ??
@dillansgarage29 күн бұрын
I don’t know the part number off the top of my head, but the link to the seal is in the video description
@JiminyCrickeyАй бұрын
Will this work if my rear hatch won’t open?
@dillansgarageАй бұрын
There's always a chance that it's your rear control module that has gone bad, but the bad latch is more often the issue.
@loganator78rАй бұрын
Why not test a new factory blower. Since you are comparing an old worn out blower to a new one.
@dillansgarageАй бұрын
Cause I didn’t want to chance a new oem one not blowing as well. This was a perfect fit and had no risk.
@loganator78rАй бұрын
@dillansgarage would be a great video comparing the difference tho!
@dillansgarageАй бұрын
@@loganator78r I just might do that some day!
@dillansgarageАй бұрын
If I had to place my bets I’d guess they’re the same motor
@saskskierАй бұрын
Thanks for this! My latch went on Sunday so only had to go a few days with a bungee holding my hatch closed. Couldn't lock it, but only got broken into once while I was waiting for the new latch to arrive. Took about 30 minutes from start to finish, everything went smoothly and now I've got locks again! Lol
@dillansgarageАй бұрын
Nice! I’m happy the video could help. My Amazon latch is still working like new.
@petevidales1519Ай бұрын
Great video guys. My wife is in on my family getting one lol. I’ll send her this video.
@dillansgarageАй бұрын
Thank you! We love ours. Hope the video can help seal the deal!
@KirbyLouisАй бұрын
kenda klevers, fuckin a
@dillansgarageАй бұрын
You know it. My favorite tire
@jasongarcia2783Ай бұрын
Did you do the giveaway already?
@dillansgarageАй бұрын
Yessir. Did that a few months ago
@thecosmickat3954Ай бұрын
what the fuck is the point of this video?
@jesses.7107Ай бұрын
Original paint
@dillansgarageАй бұрын
Too late
@cognac8297Ай бұрын
That's so easy
@dillansgarageАй бұрын
Definitely!
@lewisCRAZ369Ай бұрын
I bought those same liners that you have, how did you attach the front ones it looks like I’m missing some sort of bracket there holes but there’s no where to install
@dillansgarageАй бұрын
I’m still working on the liner video. Do you also have the fenders? The liners use the same holes and as the hooks road fenders. It’s took a few minutes to figure out and seemed like they weren’t going to fit, but suddenly worked perfect. It’s was definitely odd in the moment.
@lewisCRAZ369Ай бұрын
@@dillansgarageI figured it out I had to smack it into place but I still have one hole each fender that didn’t line up or non existing hole where there should
@wesleygiles4725Ай бұрын
Where do I find the turn signal assembly for the fenders on Amazon? Do you have the item number? I have a Willys Jeep Wrangler JLU sport. It has the short version. What do I need to order to make it work?
@BradyThornton-vx6xo9 күн бұрын
Dylan, do you have the liner video yet? I have them and need some help on install. Thanks
@dillansgarage9 күн бұрын
@@BradyThornton-vx6xo howdy! Haven’t had time to make the video yet. If you have Instagram shoot me a dm over there. Easier to message that way vs through comments @dillansgarage
@wildxtrek24Ай бұрын
Great video! How does the switch panel determine the difference between DRL and the full power light bar? How did that wiring work? Is it just two separate leads that go to two different buttons?
@dillansgarageАй бұрын
Thank you! The lights have separate leads for the DRL and the main light. so you just wire them up to two different switches
@lucasklock5494Ай бұрын
hell yeah dude. Loved it! Simple and effective! Well done
@dillansgarageАй бұрын
Thank you! He still uses the rail regularly. Stoked you like it
Пікірлер
Interesting reading the comments and how some people are like it’s a Sequoia and will never be used as an off roader . I have a 2019 Sequoia and it spends lots of time off road and loves it . I’ve had 6 Tacomas , 4 Tundras , and FJ-40 and hands down the Sequoia is my favorite. Looked at the new sequoias and am not sold on the way the cargo area is , with the hybrid system it does not lay down flat and storage is an issue. Thanks for sharing yours
Toms Sequoia is setup really nice and he actually uses it. It’s funny how people have to try and tell you your own business lol either way it’s a cool rig, just not for everyone.
Awesome vid, just wondering if its really noisy with all that movement and if there is any way to get rid of all that movement??
Thank you! Are you referring to the way bumper separate from the body? If so, that’s just how it is. It does that with the stock bumper too, you just can’t see it cause the plastic flexes with the movement.
@@dillansgarage ok awesome thank you, I also was just wanting to make sure would thing bumper work with a 2003 4th gen v6?
@@bassfishing7249 it would work on yours basically the same as mine. The only thing that would be different is you need fog lights with turn signals built into them so you can wire your oem turn signal harness. I have a link for yours in the description also
@@dillansgarage thank you very much love the vids keep up the great work
@@bassfishing7249 thank you! Means a lot to me thank you. Posting has been slow the last couple months because we just moved and there’s been a lot going on. But I’m about to kick it into gear again
Great learning lessons. I appreciate your humble video. Great work, Yo.
Thank you. I really enjoyed this one and learned a ton from it. I’m glad you enjoyed the video! Thank you for the comment!
Roll on truck bed liner also works great as a ghetto roof coating. Lots of stuff does as long as it has UV resistance.
Nice. I have used bedliner for a lot of stuff, but nothing that has gone on as thick and strong as this liquid rubber.
What is the best way to order an extra set of brackets ?
I would hit up Hooke Road on the website and send an email or send a message on IG
One thing you didn't mention was switching out the mineral oil that was commonly used for r12 systems to PAG oil. Good video overall though.
Good call! Thank you!
Thanks!
Holy smokes!! My first super thanks! Thank you so much!
That is an awesome discovery. It looks awesome dude , that coming from an old timer looks great
Thank you! Glad you like it. I really enjoyed that bumper. I ended up getting another one from that same company but one with a winch mount. Did you see that video?
Does a 2 wheel drive 5th gen 4Runner have cv axels in the front? I’ve had multiple mechanics tell me I don’t have cv Axels in the front.
That’s correct. CV axles are only for 4wd IFS vehicles. The only thing somewhat related to this would be to check your wheel bearing, but those don’t usually go bad with normal use. Our 4runner front bearings are designed to last the life of the vehicle. That said I changed my around 140,000 miles cause they were shot.
@@dillansgarage here’s something I found online . Pretty much what I’m experiencing. A finger-snapping, popping or clicking sound when you turn What it means: If you have a front-wheel-drive or all-wheel drive vehicle and hear this sound when you turn or corner (but the noise stops when you drive straight)
@@JamesCardenasMyinsuranceguy I would get under there and check every bolt. Tighten everything. Brakes, ball joints, bushings. Could be worn out bushings or ball joint that need replaced. I’ve replace ball joints twice in the last 7 years, but I also work my truck more. What year is your 4r?
@@dillansgarage 2015. Thank you
Great video! Only thing that could be better about it is if you said what the socket sizes were.
Thank you! Appreciate the compliment and feedback, but I can't make it tooooo easy for y'all. Right?
@@dillansgarage but you could have saved me a total of 23 seconds! lol
@@chevysizemore8035 😂 you have a point there!
Good video boss, but please don’t advise people to use head gasket sealer. Remember, what seals up the leak in your head gasket will seal up other things as well.
There’s a difference between chemical bonds and physical sealants. I agree with you about physical sealants like stop leak
@@dillansgarage I wasn’t trying to say you were wrong or anything, it’s just that I had an experience with trying to use some sealant and it gunk up my thermostat and radiator and everything. Maybe you can help me I have a 2009 Nissan frontier with a 4.0 V6. To make a really long story short, I’m pretty sure that I have a leaking head gasket. It’s a very very slow leak. I only have to add coolant about every two or three weeks or so and even then it’s only just a little bit of coolant. The problem I have is that if I put a load on the motor like hauling a trailer, it immediately gets hot. So my question is what type of sealer would you recommend because at this point I’m willing to try anything because I’m looking at having to buy another motor because I’m not going to spend $3000 to get the head gasket fixed. The truck has 211,000 miles. Thanks any help is really appreciated.
@@rustypugh123 I have used blue devil, not the pour-n-go one, multiple times and never had any symptoms of gunk build up. It’s always been super clear. Follow the directions carefully with the blue devil and do it correctly.
@@dillansgarage thanks I appreciate it
@@rustypugh123 anytime. I have an old KZread channel that’s not mine anymore called Trail Bender Overland. Those videos are still live and I made a detailed how-to use blue devil on there.
Installing mine now. That bracket you left off goes in the inside of the frame. So basically that bracket and the bumper sandwich the rear frame. I also picked up a license plate bracket that will attach to one of the locations for the D-ring mount. I don’t have parking sensors so I left the rubber covers on. I have Hooke Road front bumper and tube doors so this goes well with the other accessories.
Whoa. Why the heck didn’t I think of that. Now that you mention it, it seems so obvious. Thank you for sharing. Can you share the license plate holder link?
I bought tge same kit ,nit doesnt seem to suck anything. The ball just stays deflated . Ir i am doing something wrong ?
Strange. Is the tip of the nozzle dipped in coolant?
@@dillansgarage nope nowhere close . Even just doing it in open air . It doesn't seem to suck anything. I tried even to blow air through the nozzle I couldn't force any air into it . I am thinking the valve is defective. I hate to return it but I have to .
Hi there, what size are the torx bolts that come with the steps? Are they T55 as well?
Aw man. I’m sorry I don’t remember but I think so. I don’t have the jeep with me anymore to check
Interesting way to get likes…
Most KZreadrs do what they can to gain metrics. That said, I don’t make useless shorts like this anymore. Here’s the full video if you’re interested: Square body Chevy and GMC Blower Fan $30 Upgrade - How to kzread.info/dash/bejne/Y6eIvI-zdqrUj9I.html
A day later, this guy has another 4runner. Hahahahaha
Wut?
I’ve always had the same 4Runner. I don’t understand the comment lol
Wow. Nice work fixing those tabs. How’s been the alignment so far? I’m evaluating to buy one of those bison cambolts. Thanks for sharing
Alignment has been rock solid ever since this install. Super super happy with them. Fixing the tabs was a must. The bison tabs or taco tabs are for sure the way to go
Prefer a cable to drive by wire any day. I can fix a normal cable throttle with random crap anywhere any time. If your drive by wire pedal or throttle plate stepper motor dies, you're screwed
There’s definitely pros and cons to each. I own carb and EFI trucks. I enjoy them both
Deez nuts worked well. Ty for that. Made mah day
Heck yeah haha anytime my friend
Beautiful build!
Thank you!
Thank you sir. 🤘
You’re welcome! Happy to help. Thank you!
Im having a hard time figuring out if this would look stupid on stock ride height. Some drunk pos hit n run my v8 baby 😢
I definitely don’t think it’d look bad on a stock rig. If you’re running smooth looking road tires might not fully match the vibe. But I still think it’d look better over stock
You gave me the confidence to do this… twice. After installing it and doing the battery reset, it didn’t work! I realized I missed that step of plugging it into the connector, so I had to remove the interior pieces again to get to it. My mistake, not yours. Overall, an easy repair because of your great instructions. One more thing, I made damned sure I had my 10mm socket prior to doing anything. 😂
Ha! I’ve made mistakes exactly like that too many times. Good work not letting that 10mm walk away! There’s a dark place where they escape to. Glad you got the job done.
Keep paint factory. Classic 80s two tone
I think you’ll like what we did with it
In 1975 I worked for Holly Carburetor in a factory where we made those pumps. My job was to make the hub that connected the pulley to the pump. Three holes were drilled, tapped and chamfered, four at a time in a stationary milling machine where the center rotated to each milling head to preform each task. I entertained myself by seeing how many I could make during each shift. I don’t remember the number but I broke the machine more than once!
Thank you for sharing the story!! Love hearing about everyone’s experiences in the industry
My tester leaks all the blue fluid
Brutal! Sorry to hear. Did you overfill it?
No I filled it to the line.it imminently started leaking the fluid.
A week for the winch video, it's been 6 months
It’s been a really gnarly 6 months and had to get a lot of content done for other partners. The which mounting seemed easy enough that it wasn’t the highest priority. Then we moved to a new place and has a run down shop I’m in high gear to get fixed up so I can continue shooting content.
Did you see that the short I linked as a card during the winch portion of the video
@@dillansgarage Do you think the bumper is strong enough for the full force of the winch? I'm thinking of buying one. Just unsure if it's strong enough.
The best looking large suv. Would’ve bought it if it wasn’t the cargo space/3rd row.
Definitely a great looking truck!
I’m with you on that , I have a 2019 folds flat to the front seat . Don’t know what they were thinking:-(
@@mikekuczynski1552 I’m going to total opposite direction with my own vehicles. Until I win the lottery I’m only driving older trucks from now on, vehicles I can actually work on.
@@dillansgarage I’m a mechanic also that’s why I by Toyotas so I don’t have to work on them in my spare time
nice vid, Does replacing rear axle seal has similar procedure?
I haven’t done that yet. Im sure there’s similarities, but being a solid axle will be its own process. Most axles seals are somewhat straight forward to replace
My wife dailys a 1989 burb.
Your wife is rad
@dillansgarage yea she's pretty alright. When I met her she was driving a 1993 Blazer. 2nd to the last year of the full size k5 blazer name plate before they went to Tahoe. Needless to say it was love at first sight. So I got her a squarebody suburban and let her start filling it will kids!!! Lol
I’ll give you all a gold nugget…. Only use OEM cv shafts!!!!!! Get low mileage ones or have yours rebuilt. 5th gen 4runner axles fit the 4th gen and have a superior boot design. Also, there is no difference between the V6/V8, exact same axle! ****ALWAYS use the Toyota tool to install new diff seals. Don’t want to drop the coin on an actual Toyota tool? A guy on Etsy sells 3D printed hard plastic replicas for $20. You’re welcome
I appreciate your input. 30k miles later and the cv I installed and the seals are great still. We’ll see how long they last
what size wheels and tires are those?
The wheels are ProComp 89 series 17” The tires were General Tire ATX 33”x10.5” But I’m really enjoying my new Kenda Klever R/T. I’ll mostly likely be sticking with these.
What’s a good lube of choice to help with the hinges
I use what ever I have on hand. white lithium grease or even just straight engine oil
Im glad yall happy with the mom burb /family member an congratulations on the lil one to come .
Thank you! Baby girl is 7 months now and life is good
I just start rebuilding an 86 GMC Suburban. The real Steel. Pretty much same colour and Barn Door too.
So awesome. They’re such awesome trucks. I love that we actually CAN rebuild them. I’m so over new trucks.
Link
Here’s the first one I did, same as in this reel TRENDING: $400 4th Gen 4Runner Offroad Steel Bumper kzread.info/dash/bejne/ZKuMzZanZLO_n5M.html
Here’s the winch bumper a did later $500 4th Gen 4Runner Offroad Steel Winch Bumper kzread.info/dash/bejne/eHV8s6mld9m7YLw.html
Any idea what’s the part number for the “ spindle axle seal” ??
I don’t know the part number off the top of my head, but the link to the seal is in the video description
Will this work if my rear hatch won’t open?
There's always a chance that it's your rear control module that has gone bad, but the bad latch is more often the issue.
Why not test a new factory blower. Since you are comparing an old worn out blower to a new one.
Cause I didn’t want to chance a new oem one not blowing as well. This was a perfect fit and had no risk.
@dillansgarage would be a great video comparing the difference tho!
@@loganator78r I just might do that some day!
If I had to place my bets I’d guess they’re the same motor
Thanks for this! My latch went on Sunday so only had to go a few days with a bungee holding my hatch closed. Couldn't lock it, but only got broken into once while I was waiting for the new latch to arrive. Took about 30 minutes from start to finish, everything went smoothly and now I've got locks again! Lol
Nice! I’m happy the video could help. My Amazon latch is still working like new.
Great video guys. My wife is in on my family getting one lol. I’ll send her this video.
Thank you! We love ours. Hope the video can help seal the deal!
kenda klevers, fuckin a
You know it. My favorite tire
Did you do the giveaway already?
Yessir. Did that a few months ago
what the fuck is the point of this video?
Original paint
Too late
That's so easy
Definitely!
I bought those same liners that you have, how did you attach the front ones it looks like I’m missing some sort of bracket there holes but there’s no where to install
I’m still working on the liner video. Do you also have the fenders? The liners use the same holes and as the hooks road fenders. It’s took a few minutes to figure out and seemed like they weren’t going to fit, but suddenly worked perfect. It’s was definitely odd in the moment.
@@dillansgarageI figured it out I had to smack it into place but I still have one hole each fender that didn’t line up or non existing hole where there should
Where do I find the turn signal assembly for the fenders on Amazon? Do you have the item number? I have a Willys Jeep Wrangler JLU sport. It has the short version. What do I need to order to make it work?
Dylan, do you have the liner video yet? I have them and need some help on install. Thanks
@@BradyThornton-vx6xo howdy! Haven’t had time to make the video yet. If you have Instagram shoot me a dm over there. Easier to message that way vs through comments @dillansgarage
Great video! How does the switch panel determine the difference between DRL and the full power light bar? How did that wiring work? Is it just two separate leads that go to two different buttons?
Thank you! The lights have separate leads for the DRL and the main light. so you just wire them up to two different switches
hell yeah dude. Loved it! Simple and effective! Well done
Thank you! He still uses the rail regularly. Stoked you like it