Пікірлер

• 
  @jftomlinson2 күн бұрын

  Thanks brother! That took care of it!

• 
  @geezberry888915 күн бұрын

  looks like they no longer come with honda engines.

• 
  @mex2fly115 күн бұрын

  It’s probably condensation water it does use hot water it’s also just like a maintenance due to check everything is ok

• 
  @patriciabellanger665618 күн бұрын

  Bonjour, j'ai ouvert mon filtre pour la première fois et n'arrive plus à la refermer

• 
  @McCarthyism_by_Youtube21 күн бұрын

  should have restricted movement with some sort of bracing. not all customers are 105 lbs. this will leak with daily use.

• 
  @IllGetMyTools21 күн бұрын

  @@McCarthyism_by_KZread maybe your right I installed them 3 years ago and no leaks…..

• 
  @bharrison336422 күн бұрын

  Thanks for the video, saved me a lot of time and money, like another comment said, it’s not a bad idea to put a little distance between the sensors and the bottom of the drain pan, I just used machine washers two or three of them, depending on the size. Thanks!

• 
  @stevenhaley44323 күн бұрын

  two coats of stain? I'm using a darker gel stain to it is showing brush marks and wipe marks significantly.

• 
  @IllGetMyTools23 күн бұрын

  @@stevenhaley443 one coat and I didn’t use the gel stain it’s too thick. Regular stain

• 
  @RapTalesRewind25 күн бұрын

  What did you use to cut the duct?

• 
  @IllGetMyTools25 күн бұрын

  Regular Tin snips

• 
  @RapTalesRewind25 күн бұрын

  Cool thanks.. I have a client that wants me to install this.. you're video was great

• 
  @user-xu4ml8zp3x28 күн бұрын

  I did have a little clog in my drain, so thank you so much! I was able to fix it and the error code is gone and it is working now! and it saved me a repair fee!!!!

• 
  @joeldurivage3289Ай бұрын

  Thank you so much! It worked!

• 
  @Johny40Se7enАй бұрын

  Solid that is, great stuff.

• 
  @Sailor1010Ай бұрын

  “If you wanna do woodworking you better get good daytime job”. I felt that lol

• 
  @SinamonluvaАй бұрын

  The biggest thanks to u!! I fixed my dishwasher with your steps!!!

• 
  @AntLive29Ай бұрын

  is the machine loud? couldn't hear it over the music

• 
  @ductpadАй бұрын

  2024 watching this! Thank you 🤙

• 
  @sandrareynolds7358Ай бұрын

  Thank you, Mr Fix-it! I had OC light flashing. Followed booklet instructions and then waited a bit to reset power, then LC error came up. I soaked up all the water and LC light is still on. I’m not mechanically inclined so I’ll have to get a person with tools to come do the rest, but at least you have given me something I can show to him. Again, thank you.

• 
  @priyanshujainamazing3551Ай бұрын

  Do did u cut the inner arms at 64⁰??( 32+32) ???

• 
  @oliviaromero1842Ай бұрын

  Thank you for making this nightmare possible

• 
  @bu11comАй бұрын

  I was sure I had missing instructions but it turns out they didn't give them. Just had some weird little diagram of 4 different models on one page. This video was helpful without a bunch of other junk

• 
  @thuduong2464Ай бұрын

  Do you have to sand it first ? Thanks

• 
  @IllGetMyToolsАй бұрын

  No my fiberglass door was textured so that would ruin the look

• 
  @thuduong2464Ай бұрын

  @@IllGetMyTools that make sense. Thanks

• 
  @martyshapiro8756Ай бұрын

  Thank You Ivan!, It was exactly like your video, not enough water to wipe up, but had the LC error code. I added a washer under the sensor, hope it works. And llike others here, I am a hero to my wife! Thanks again, Marty

• 
  @IllGetMyToolsАй бұрын

  Marty, Marty, the one man party!! Glad it worked out for you hopefully that’s the last time!

• 
  @wellingtonappliance67782 ай бұрын

  Your first mistake is buying Samsung, Never run you Dishwasher before you go to bed, you are asking for trouble

• 
  @IllGetMyTools2 ай бұрын

  Thanks for that statement

• 
  @franciscoayala10622 ай бұрын

  Cool. Best regards from Germany 😊

• 
  @martinpena24362 ай бұрын

  Hey Ivan, when do you recommend I should replace the blade? Mine has become more rounded than the original rectangular shape...

• 
  @IllGetMyTools2 ай бұрын

  You must be using it quite often. My blade is slightly rounded as well, I used a grinder to flatten it out a bit, but without seeing yours it’s tough to tell. Replacement blade is $15. If you need one go pick one up Lowe’s or ace hardware.

• 
  @martinpena24362 ай бұрын

  But normally, how often are they supposed to be replaced? I couldn’t find the answer in the manual.

• 
  @IllGetMyTools2 ай бұрын

  @@martinpena2436 manual wouldn’t tell you, again, it’s completely based on how often it’s used and what medium it’s going through. I’ve had mine over 2 years and same blade. Depending on how often you use it and how rocky or sandy your soil is wear would obviously be greater.

• 
  @martinpena24362 ай бұрын

  Ok, thanks. I’m fairly new to landscaping and gardening tools. Everywhere I’ve lived, they always had gardeners.

• 
  @waterbuoyish2 ай бұрын

  Great vid. I also followed it step by step. Same findings. Regarding raising the sensor, I just put a couple of washers under each side and screwed it into place. Probably raised it about an eighth of an inch.... could've gone further if I had longer screws. We'll see if this works.

• 
  @waterbuoyish2 ай бұрын

  It didn't work. Next is looking to replace the pump. Looks like there might be one online.

• 
  @penelopemaynard90162 ай бұрын

  thank you! great video! loved and subbed xo

• 
  @IllGetMyTools2 ай бұрын

  Much appreciated thank you!!

• 
  @douglasrussum51002 ай бұрын

  Don't need to take the top trays out. Everything else was helpful minus having to spend an hour trying to put the top trays back in for literally no reason.

• 
  @socalhvac35752 ай бұрын

  whats with all the $20 dollar bit gets it done people. Yea, done once. Also he isnt using a straight bit, its a surfacing bit..Trend is like freud equivalent, middle of the road. A whiteside or infinity router bit can easily surpass $100.00. CMT is good too. Those cheaper bits work, but every woodworker knows that the cheap bits are usually when you start out so you don't ruin an expensive one. He is surfacing a large piece not a cutting board 😂. Your sled is cool too.

• 
  @IllGetMyTools2 ай бұрын

  Thanks for saying that. The internet loves to be negative without knowing the whole story. I usually don’t bother explaining myself. But thank you!

• 
  @fatal510Ай бұрын

  A freud 1 1/4in spoilboard bit is 20 dollars. Are there some specific quality bits that cost over 100? Yeah. Spoilboard bits aren’t one of them.

• 
  @robertmoore81662 ай бұрын

  I have the same model. DW80. Are you sure that you do not have an actual leak? You did say that you had water under the dish washer. Drying the sensor only gave me two weeks before the LC error came back again. My dishwasher is not on an outside wall, so I don't think it is condensation. I really need to find out what is leaking. Unfortunately, like yours, nothing is obviously wet. I am thinking of installing a very small pump to pump the water out of the drain pan.

• 
  @IllGetMyTools2 ай бұрын

  Since making this video - few years ago the error hasn’t comeBack nor do I have any water in my kitchen. It’s just a bad dishwasher.

• 
  @bhobbz12592 ай бұрын

  Thank you , it worked🎉

• 
  @kellybartok502 ай бұрын

  It’s good to be building projects , it keeps your mind focused and you open doors of opportunity in your life that are good , prosperous and fun .That )185.00 dollar bit , I bought a case of router bits for less than $185.00 , there are many kinds of bits in the that assortment of bits that will smooth and even the project peace , the bit may not be as good as the $185.00 bit , but we’ll have to wait and see on my next project .

• 
  @IllGetMyTools2 ай бұрын

  I appreciate that thanks

• 
  @bullsfan59772 ай бұрын

  I've had this pressure washer in for repairs 3 out of the 4 years I have owned it....

• 
  @IllGetMyTools2 ай бұрын

  Damn that sucks

• 
  @GrateMilenko2 ай бұрын

  i think the water is coming in through the door when you open it. i came here specifically to figure out where the sensor was to possibly dry it after i tipped it forward on accident and some water spilled. i had just tested it as well.

• 
  @IllGetMyTools2 ай бұрын

  Anything could be a possibility at this point. With over 265,000 views many people are having problems with these Samsung washers

• 
  @pablomendoza81932 ай бұрын

  For a business that washes 30 cars a day, would it work? Which one would you recommend

• 
  @IllGetMyTools2 ай бұрын

  I would get a commercial washer for that. Although it’s a Honda engine I’m not sure on the longevity for that much use.

• 
  @TwinOnDaMove2 ай бұрын

  how did the salon chairs hold up after 4 years now.? i want to buy one

• 
  @IllGetMyTools2 ай бұрын

  Still doing just fine. Only problem is if color gets on them it might stain the chair so make sure you’re careful.

• 
  @jogianni1002 ай бұрын

  Excellent vid I’m doing mine Monday w my neighbor. Suggestion to move the sensor is very clever I have bought washers to Lift that pesky sensor up !! LC code has triggered before!! It’s a Samsung thing but I like the dishwasher

• 
  @Tikimang2 ай бұрын

  This helped me I didn’t the same thing you did and my dishwasher works now!! THANK YOU SO MUCH!!

• 
  @StanislavPonomarev-ue6dz3 ай бұрын

  Would it be the same result if i leave the door hanging instead of taking it down and laying it flat?

• 
  @IllGetMyTools3 ай бұрын

  As I stated in the video the stain can run and mess up the blending and color. Take the extra 10 minutes and do it the right way lay it flat

• 
  @gefflynn71713 ай бұрын

  Great joy on the door very helpful! Did you use Gel or Regular stain? I thought I goofed but after watching this maybe not. I used regular Minwax Red Oak 215 (not gel) stain. It seems to take longer for it to dry. In you experience will this stain be fine? OR do I need to remove it 🥵and use Gel? thx in advance.

• 
  @IllGetMyTools3 ай бұрын

  Regular Stain works fine but yes it will definitely take some time to dry, as I stated it doesn’t absorb into the fiberglass it basically dries and sits on top. So make sure you use a polyurethane or whatever other top coat to seal it all in once it dries.

• 
  @mikoajsobczyk42723 ай бұрын

  Dziękuję - moja zmywarka działa :)

• 
  @haggardlife60573 ай бұрын

  A quick fix to that as long as there isn't a leaking tube from the disposal or a leaking water hose is to just unscrew the side panel after you pull the dishwasher out and get a wet vac with a thin attachment to suck out whatever water there is at the vottom

• 
  @nickchapman563 ай бұрын

  Did everything you said to do and nothing still getting code

• 
  @litoteh3 ай бұрын

  followed your step-by-step fix and found nothing obvious or where tf the leak was coming from. Just a little bit of water in the pan. dried and cleaned it up and bam, it works now. I became a super hero to my wife.

• 
  @IllGetMyTools3 ай бұрын

  Hopefully she paid you “in full”….!!!!

• 
  @PawpiChoolo3 ай бұрын

  @@IllGetMyToolsShe paid me in full that’s for sure.

• 
  @MismelisАй бұрын

  😂 in full?

• 
  @litotehАй бұрын

  @@Mismelis In full and then some. I made it dramatic with all my tools (necessay and uneeded) strewn about and throwing water on me to show how "intense" the fix was.

• 
  @dianav53033 ай бұрын

  LOL helpful ty

• 
  @LeonardoPinzon-us1um3 ай бұрын

  Thank you, your advice worked. My dishwasher is working again.

• 
  @LeonardoPinzon-us1um3 ай бұрын

  Thank you, your advice worked. My dishwasher is working again.

• 
  @user-nu4ps5il5j3 ай бұрын

  I'm doing for a PC build . Thank you

• 
  @user-nu4ps5il5j3 ай бұрын

  Thank you

• 
  @jennifernpage72363 ай бұрын

  I had the LC code error and did everything but when I plugged it back up I have no power 😢

• 
  @IllGetMyTools3 ай бұрын

  Make sure wire connections are tightened properly. If not, when you slide it back into place they can loosen and disconnect

• 
  @Southpaw703 ай бұрын

  Perfect fix. Took about 20 minutes. Thanks bro

• 
  @michiteliabradshaw36333 ай бұрын

  Hello great video i have been hearing that if you don’t dig the grass up some people have had grass in their pools. With the method you used with the foam board did you have that issue.

• 
  @IllGetMyTools3 ай бұрын

  The tarp at the end works pretty well to keep grass out. The problem is if the kids are in and out around the yard the grass is going to end up in the pool. I got a pool screen to fish out the grass and even bugs that do get in there