♨️Attention♨️ The original Cutoffs fuse 15A 229⁰C I used the 195⁰C it worked ony ones and not worked again so use the 229⁰C 15A is important ⚡️ And thank you ❤
@behnammohajeri70472 ай бұрын
You talking too much wasting time I waste my time to listening to you
@egotraumatic3 ай бұрын
Better to watch on x1.5. Great video! Thank you!
@darkmadarauchiha5 ай бұрын
Really useful video, watched a few others but they didn't help much. You started at the right level to help everything else fall into place! Keep it up!
@tsunningwah34715 ай бұрын
zhina!!!!!
@tevman696 ай бұрын
Please provide a contact number for replacement pedal. I am unable to find one online. Thank you, sir.
@stablemechanic56296 ай бұрын
I don't know if I can paste the email address here. Send an email to [email protected] they are going to send you a link for purchase.
@user-zv6oj5op3g7 ай бұрын
I wonder who are you, sir? You did a great job explaining about the stack (kzread.info/dash/bejne/mqOAmq-LkqWngqw.html). Thank you very much! And now I see a video on how to repair a coffee machine, and there are other interesting videos that are not computer related! So I repeat my question. Who are you, sir! 🙂
@TON-vz3pe7 ай бұрын
Fantastic explanation. But where does the text segment fits in all this?
@0x20d4 ай бұрын
I assume you mean the text segment in your assembly file? If so, the text segment holds your instructions. In case of this example that would be j=j+k (or EAX <- EBP -4 and EBX <- EBP - 6 and the corresponding ADD instruction for actually adding the numbers).
@sgalaxy2012st7 ай бұрын
Is there any way to fix "pink error" (not flashing, just permanent pink)?
@dakshapatel93928 ай бұрын
How did u stitch it I need to show that please vey good idea
@hassanahmed13149 ай бұрын
Very good 🎉❤
@krenilraj418010 ай бұрын
can someone explain me , the foo() function in the white diagram is the instruction there and foo stack frame , a stack is created for foo function inside there variables are stored and after it is successfully loaded it will CPU will start executing foo function Am I right ? If wrong please explain me
@TheFenceHoppr10 ай бұрын
Did they give you a part number or link for the replacement part? I can’t find it anywhere
@stablemechanic56296 ай бұрын
I sent an email to [email protected] and they sent me a private link for purchase. You can try. I hope it works.
@yuriyfse655510 ай бұрын
ma-an, very slowly it's 2023 on yard, not 1960 - in youtube we can watch many different videos
@albanbulku657311 ай бұрын
Did this worked ?
@stablemechanic56296 ай бұрын
Yes, still good.
@almomani861 Жыл бұрын
Thank you so much bro, it is useful video a very good explanation
@positivevibe142 Жыл бұрын
AsSelam alykum wa rahmatullah wa barakatuh brother...I just purchased my Beko 6 weeks ago from amazon and it was working just good masha Allah .... yet the other day, I felt a bit curious (like usual 😁) and told myself: does it heat water? Then I just put water and the machine had like a brain stoke lol. So I turned it off, and been using it for a few days and was fine. Now I noticed that once the coffee is done, the red and white color at the same time ON, and doesn't want to release the pot! I had to pull cable from the wall to turn it OFF to release my pot (you feel me bro, it is morning time and I needed my daily dose of Turkish coffee lol). Anyways, do you think there is something wrong with my machine, do I have to fix something? Any thoughts! Jazak Allah khayr
@stablemechanic5629 Жыл бұрын
It sometimes happens to us. The best you can do is clean the inside of the machine with a damp cloth, the place where you put the pot. Sometimes the coffee accumulated there makes the sensors act weird.
@positivevibe142 Жыл бұрын
@@stablemechanic5629 Thank you for the tip. I'll do it.
@gordon5004 Жыл бұрын
Thank you for this. Very informative. I have to do the same thing.
@Swiddy_Swooty Жыл бұрын
How do you take out?
@thegt Жыл бұрын
One of the best explanations I've seen so far. Enough level of detalization, good level of visualization.
@snowythecat9159 Жыл бұрын
Thank you very much for the very useful video and full explanation. Now I will repair my coffee machine. Thank you very much.
@stablemechanic5629 Жыл бұрын
Thanks for patiently waiting 😅 👍
@dr.shaarawy Жыл бұрын
plz , how to replace power button ?
@stablemechanic5629 Жыл бұрын
Hi. I am not sure which parts are used there. It might be a mechanical issue. In the past when I started opening the coffee machine there was times I reassembled wrong and power button was not working. Then I changed how I assemble it. I hope that helps.
@CarGang4life Жыл бұрын
I have a 2010 mkt it had a clunking noise from front right end. Any info?
@stablemechanic5629 Жыл бұрын
I am looking for that too. I will let you know when I find it.
@Jkauppa Жыл бұрын
why not just direct in-memory computing
@yuriyfse655510 ай бұрын
))) how you imagine it?)
@noa29Enib Жыл бұрын
Great explanations thanks :)
@mikhailmikheev8043 Жыл бұрын
youtube algorithm doing wonders
@Rob01V Жыл бұрын
Can you provide demonstration
@stablemechanic5629 Жыл бұрын
I can try to do that. after that fix it got broken again. i then put a lot of epoxy to fix. we will see.
@joerit633 Жыл бұрын
Excellent video!! Very interesting and informative!! Thank you!!!!
@dr.shaarawy Жыл бұрын
hello there, can you please show how to replace power button ?
@pfxlab2 жыл бұрын
This is very unfortunate, that you missed to show how to replace fuses... Can you please show how it is done, please.
@stablemechanic5629 Жыл бұрын
Hi, its been some time. I uploaded a new video showing how to replace the fuse.
@zeinalabdeenalhourani68682 жыл бұрын
Hello , my machine is working but its not start heating one i press the start button it should turn to red in my case its keep white and the magnet plate is not pressing the cup
@stablemechanic5629 Жыл бұрын
Hi, its been some time. I uploaded a new video showing how to replace the fuse.
@snowythecat91592 жыл бұрын
Hi Cool video Could you please help me with this machine I have the same one like this but didn't heat water keep giving me pink color and peep sound please help me
@stablemechanic56292 жыл бұрын
Hi, there is a fuse in the heater and you need to change that fuse in order for it to heat again. I am planning to make a video for that.
@snowythecat91592 жыл бұрын
@@stablemechanic5629 thank you so much for your advice I will wait for your video 🌹🌹🌹🌹
@stablemechanic5629 Жыл бұрын
Hi, its been some time. I uploaded a new video showing how to replace the fuse.
Пікірлер
♨️Attention♨️ The original Cutoffs fuse 15A 229⁰C I used the 195⁰C it worked ony ones and not worked again so use the 229⁰C 15A is important ⚡️ And thank you ❤
You talking too much wasting time I waste my time to listening to you
Better to watch on x1.5. Great video! Thank you!
Really useful video, watched a few others but they didn't help much. You started at the right level to help everything else fall into place! Keep it up!
zhina!!!!!
Please provide a contact number for replacement pedal. I am unable to find one online. Thank you, sir.
I don't know if I can paste the email address here. Send an email to [email protected] they are going to send you a link for purchase.
I wonder who are you, sir? You did a great job explaining about the stack (kzread.info/dash/bejne/mqOAmq-LkqWngqw.html). Thank you very much! And now I see a video on how to repair a coffee machine, and there are other interesting videos that are not computer related! So I repeat my question. Who are you, sir! 🙂
Fantastic explanation. But where does the text segment fits in all this?
I assume you mean the text segment in your assembly file? If so, the text segment holds your instructions. In case of this example that would be j=j+k (or EAX <- EBP -4 and EBX <- EBP - 6 and the corresponding ADD instruction for actually adding the numbers).
Is there any way to fix "pink error" (not flashing, just permanent pink)?
How did u stitch it I need to show that please vey good idea
Very good 🎉❤
can someone explain me , the foo() function in the white diagram is the instruction there and foo stack frame , a stack is created for foo function inside there variables are stored and after it is successfully loaded it will CPU will start executing foo function Am I right ? If wrong please explain me
Did they give you a part number or link for the replacement part? I can’t find it anywhere
I sent an email to [email protected] and they sent me a private link for purchase. You can try. I hope it works.
ma-an, very slowly it's 2023 on yard, not 1960 - in youtube we can watch many different videos
Did this worked ?
Yes, still good.
Thank you so much bro, it is useful video a very good explanation
AsSelam alykum wa rahmatullah wa barakatuh brother...I just purchased my Beko 6 weeks ago from amazon and it was working just good masha Allah .... yet the other day, I felt a bit curious (like usual 😁) and told myself: does it heat water? Then I just put water and the machine had like a brain stoke lol. So I turned it off, and been using it for a few days and was fine. Now I noticed that once the coffee is done, the red and white color at the same time ON, and doesn't want to release the pot! I had to pull cable from the wall to turn it OFF to release my pot (you feel me bro, it is morning time and I needed my daily dose of Turkish coffee lol). Anyways, do you think there is something wrong with my machine, do I have to fix something? Any thoughts! Jazak Allah khayr
It sometimes happens to us. The best you can do is clean the inside of the machine with a damp cloth, the place where you put the pot. Sometimes the coffee accumulated there makes the sensors act weird.
@@stablemechanic5629 Thank you for the tip. I'll do it.
Thank you for this. Very informative. I have to do the same thing.
How do you take out?
One of the best explanations I've seen so far. Enough level of detalization, good level of visualization.
Thank you very much for the very useful video and full explanation. Now I will repair my coffee machine. Thank you very much.
Thanks for patiently waiting 😅 👍
plz , how to replace power button ?
Hi. I am not sure which parts are used there. It might be a mechanical issue. In the past when I started opening the coffee machine there was times I reassembled wrong and power button was not working. Then I changed how I assemble it. I hope that helps.
I have a 2010 mkt it had a clunking noise from front right end. Any info?
I am looking for that too. I will let you know when I find it.
why not just direct in-memory computing
))) how you imagine it?)
Great explanations thanks :)
youtube algorithm doing wonders
Can you provide demonstration
I can try to do that. after that fix it got broken again. i then put a lot of epoxy to fix. we will see.
Excellent video!! Very interesting and informative!! Thank you!!!!
hello there, can you please show how to replace power button ?
This is very unfortunate, that you missed to show how to replace fuses... Can you please show how it is done, please.
Hi, its been some time. I uploaded a new video showing how to replace the fuse.
Hello , my machine is working but its not start heating one i press the start button it should turn to red in my case its keep white and the magnet plate is not pressing the cup
Hi, its been some time. I uploaded a new video showing how to replace the fuse.
Hi Cool video Could you please help me with this machine I have the same one like this but didn't heat water keep giving me pink color and peep sound please help me
Hi, there is a fuse in the heater and you need to change that fuse in order for it to heat again. I am planning to make a video for that.
@@stablemechanic5629 thank you so much for your advice I will wait for your video 🌹🌹🌹🌹
Hi, its been some time. I uploaded a new video showing how to replace the fuse.