Пікірлер

• 
  @ApolloniosIX5 сағат бұрын

  könnte man die Profile für Standard Grafikkarten nicht hochladen? Voodoo 1/2/3/4/5, TNT 1/2, Matrox, etc?

• 
  @philscomputerlab2 сағат бұрын

  No as there might be variances, you really need to dial this in yourself for best results 🙂

• 
  @DavidGoscinny6 сағат бұрын

  Did the original VooDoo have anti-aliasing? I do not remember that being an option before the launch of 5500 cards.

• 
  @MONSTERAGAR7 сағат бұрын

  That Sound Blaster driver made my installation unbootable... But still, it's fine without sound. Thanks for the tutorial!

• 
  @markrigoglioso8 сағат бұрын

  Thank you for the informative video....better than instructions.

• 
  @paulerxx9 сағат бұрын

  I wish I kept my X850XT... :/

• 
  @kevinsaget12310 сағат бұрын

  I need help with the product key bit! That part wasn't clear enough. What exactly do I do? I don't see instructions.

• 
  @Someguy-323211 сағат бұрын

  Sounds good for downgrade to Windows 10.

• 
  @Lightning_brawl11 сағат бұрын

  I didnt have a pc and my grandma got me a pc whuch was in her basement it has Pentium 4 3.00ghz cpu drr2 ram and asus psgc mx 1333 motherboard 😅

• 
  @Kleinwelka12 сағат бұрын

  Hello Philscomputerlab, i a Shooter Fan

• 
  @Argoon198112 сағат бұрын

  Someone should really create a USB "pen drive" more or less in the shape of a normal floppy disk and a reader that can read those, including the reader making mechanical noises. All for those that want the nostalgic experience of handling old school floppy disks but with the convenience and data storage capacity of modern flash disks.

• 
  @philscomputerlab6 сағат бұрын

  Or just use this and enjoy life 😊

• 
  @Lightning_brawl14 сағат бұрын

  I am still using Pentium 4 3.00ghz

• 
  @harrymuurling274215 сағат бұрын

  can this be used in linux

• 
  @emukidid17 сағат бұрын

  I had this exact motherboard in 2000. It's funny every retro PC I go to build, you seem to have already built and benchmarked it 💪 I'm currently working on an Axper Socket 462, exact same board you happened to find new 😂

• 
  @djdano2kКүн бұрын

  What a nice test, thank you for the insights. I just wonder which Windows XP Version is recommended, the 32 bit or the 64 bit version?

• 
  @Thee.MightyКүн бұрын

  what if I make mixed adlib/midi mode as default for all games?

• 
  @Thee.MightyКүн бұрын

  My game samnmax uses mt32 anyway

• 
  @AWalYTКүн бұрын

  I already got two barebones models and modded them myself. Given how they are somehow getting even cheaper I'm thinking I should probably grab a few more so I can start leaving them in devices. Good times for floppy emu fans.

• 
  @GamePlayShareКүн бұрын

  I might try that. I hope games have nothing ripped out. I wonder how good DOSbox setup is. Most of preconfigured games in Steam or GOG have terrible setup like low cycles or Adlib instead general MIDI. Always have to reconfigure everything.

• 
  @croquette_frКүн бұрын

  Hi. I own one of this adapter, I don't know if it is a Gotek or a clone, but I find it very slow. Installing Windows 3.1 took me forever. Of course, it is really convenient, but sometimes I prefer writing real floppies from a modern computer with my USB floppy drive (still fully supported by Windows 11)

• 
  @icet111Күн бұрын

  The Geforce 256 has the performance as Geforce 2MX or 2MX-400? I know its only a little diefference between MX and MX400 GF 2 MX has 175 MHT CLock speed and 166 MHZ Memory, while the GF 2 MX-400 has a clock speed of 200 MHZ and the smae Memory speed 166 MHZ. But there are also exists GF 2 MX-400 card which have 200 MHZ clock and 175 MHZ Memory.I habe 4x GF 2MX-400 and 1x GF 2 MX. One GF 2 MX-400 card has Memory clock of 175 MHZ but the other 3 the standard 166MHZ

• 
  @supergrafxengine4620Күн бұрын

  I have to say you don't explain how to install exodos. You vaguely mentioned a bat exe and that it.

• 
  @philscomputerlabКүн бұрын

  Yes.

• 
  @moomah5929Күн бұрын

  I still got an unused Amiga Gotek lying around. Can this one be flashed with FlashFloppy to work on PCs or are there also some hardware differences? This would also be interesting to know for getting a newer model, as most of them are advertised as being for Amigas.

• 
  @philscomputerlabКүн бұрын

  Yes that should work 🙂

• 
  @moomah5929Күн бұрын

  @@philscomputerlab Thanks. I'll try it with my old one first and will look into one of those fancy new ones later. :D

• 
  @Not5idКүн бұрын

  Sound isn't working :( Might have to nuke this install and try something else..

• 
  @HansCampbellКүн бұрын

  Where does one get the FF.CFG file? 😃

• 
  @Linkintime12 күн бұрын

  I have an older gotek for my 500mhz Pentium 3 PC p4b but it is super slow. I'm not sure what I can do to get it to work right. If I wait five minutes after changing floppies it will finally start reading.

• 
  @floriandilewski83212 күн бұрын

  Thank you for this video. In my card collecton I have some Virge/325 and some Virge/GX2. I just checked... there ary so many versions of the S3 Virge. I love the combination of S3 for 2D and Voodoo for 3D.

• 
  @yakumoklesk2 күн бұрын

  Do this unit support single density floppy images? From 360 to 720kb to use in some old 8bit computers (MSX)?

• 
  @philscomputerlabКүн бұрын

  Check the website, it has all those details!

• 
  @thenoob699252 күн бұрын

  thanks its worked but the sound is not works very good

• 
  @garagegeek79172 күн бұрын

  waurez* the J is pronounced with a w

• 
  @daveholloway1852 күн бұрын

  Zoom out a bit Phil! You look like you're going to go for someone's neck!

• 
  @jim-me2hi2 күн бұрын

  i know this is a old video ,, i did buy the cobra sound card on ebay and i tryed it kind of not impressed with this sound card i went back to my sound blaster ZS sound card with the cd driver ,, i just think the ZS soundblaster sound card is better, i like watching all your videos thanks for testing and reviewing pc parts ,, making retro pc fun to build , every where is ketching on to retros pc computers

• 
  @stuarthughes33142 күн бұрын

  Is there a guide when buying a Gotek? I hear a lot of them are fake. Also, would be great to your list of software you keep on your USB 😊

• 
  @xlxl7472 күн бұрын

  Pentium III architecture totally crushed Pentium 4 architecture. The Pentium M and Core 2 Duo are based on Pentium III (p6) architecture. Pentium 4 is a total failure.

• 
  @gd64762 күн бұрын

  Hi,is Pcem using one CPU core like dosbox??

• 
  @philscomputerlab2 күн бұрын

  AFAIK yes for the most part, but a few other threads also exist. But having multi cores doesn't help emulate a faster machine, so the bottleneck will be the fastest single core performance.

• 
  @Super123456789Kuba2 күн бұрын

  And now I wish there was something like this but for CDs and DVDs, but that's good that if I were to build a DOS PC... You know, this is it.

• 
  @philscomputerlab2 күн бұрын

  Agreed 👍

• 
  @airmicrobe2 күн бұрын

  I play Old game with no problem 😊

• 
  @MDFGamingVideo2 күн бұрын

  Hey Phil. I know this is an old vid but wanted to pass on some related info. I got 240GB SSD, 500GB SSHD, and 1TB HDD working, all formatted Fat32, partitioned to full capacity using Rudolph Leow patches, and MiniTool Partition Manager. Aligning is not good for the boot drive since Fat32 does not like to boot past the first 1mb. So I just used FDISK and then extended the partition in Windows. That's where the SSHD works well. No alignment needed to benefit from the SSD cache since it is managed by the drive firmware. Also in Windows you will get errors from ScanDisk and Defrag unless you copy the Windows ME ScanDisk and Defrag tools, because they work well with larger HDD capacities. Also tested SATA RAID connection on a SiS chipset and some SSDs do not play nice, but most HDDs work fine. This included the SSHD because it manages the SSD cache in device firmware. Sharing this info to give back since your video and posts on Vogons have helped me IMMENSELY! Happy tinkering. :) PS - Do you have a Discord?

• 
  @swiftxrapid9193 күн бұрын

  I bet your favorite farcry game is farcry4 huh?

• 
  @philscomputerlab3 күн бұрын

  First one and then Far Cry 3 😁

• 
  @mclarenf1gtr993 күн бұрын

  Good 2000-2014 gaming PC

• 
  @Rulestoned3 күн бұрын

  PC speaker and Roland MT-32 are my favorite ones 😃

• 
  @pandacongolais3 күн бұрын

  Thanks, happy to have found your video. I have 2 Gotek. One recent like yours, with the Artery 435. I already upgraded to FlashFloppy 4.31, but had the display rotated and perhaps missing some lines. I don't remember where I found the FW, but I never found the proper setting to put the display with the correct orientation, and a nice look ! The other one is older, with an Artery 415. So far, it seems half bricked, with another FW (may be an older version of FlashFloppy, can't remember either). After reading the Wiki, I've got hope that I may flash again and give it a second chance !

• 
  @philscomputerlab3 күн бұрын

  Yup mine was also rotated, so I changed that line in the config file!

• 
  @bgjck3 күн бұрын

  Where did you get the SATA driver and how did you load up the SATA driver?

• 
  @philscomputerlab3 күн бұрын

  They are included in this software!

• 
  @bgjck3 күн бұрын

  @@philscomputerlab I tried and the XP installer keeps go to a BSOD!

• 
  @philscomputerlab3 күн бұрын

  @@bgjck Maybe you're using USB 3 port? If SATA doesn't work, try enabling IDE mode in BIOS.

• 
  @bgjck3 күн бұрын

  @@philscomputerlab My Dell Dimension 4600 doesn't have an IDE mode in the BIOS, it only has support for SATA if you supply your own driver

• 
  @bgjck2 күн бұрын

  @@philscomputerlab I used nLite to pack AHCI SATA drivers into my windows XP ISO and then I used WinSetupFromUSB and when I try to load the drivers from the first option it says no drivers where found and then I try the step of the XP install and after it loads all the stuff it says starting Windows install and then crashes into a BSOD. My computer is a Dell Dimension 4600 with a SATA drive and no IDE drive. Please Help!

• 
  @TombRaider1996forever3 күн бұрын

  I wish it had a cavity that could pull the drive in so it's not sticking out to be broken off.

• 
  @GizmoTheGreen3 күн бұрын

  what a coincidence. just got this for my retro PC's yesterday! and I had matching oled and rotary decoder in a drawer. so installed those. flashfloppy is some really neat software. haven't figured out to make it work as drive B: on my "ibm PC" though. only works are drive A:.

• 
  @philscomputerlab3 күн бұрын

  It's been ages but AFAIK the ribbon cable has some wires changed for the B: drive?

• 
  @AWalYTКүн бұрын

  Depends on how new your controller is. The oldest controllers (and most Tandy 1000 models) use the drive select feature of the cable instead of activating the motor and drive lines simultaneously, so you might need to move the jumper between JC (PC Mode), S0 (Shugart Unit 0) or S1 (Shugart Unit 1). My "Dual Drive" modded PCjr only worked with it in the S1 position. If you model doesn't have one or more of these jumpers you can override it using the FF CFG file.

• 
  @archieohare3 күн бұрын

  BTW, for more retrogaming that guys also have eXoAppleIIGS. eXoDREAMM and eXoWin3x. )))

• 
  @PotatoeV963 күн бұрын

  That ain't a Sleeper Build nah it's a Waking up Build

• 
  @SOWA853 күн бұрын

  I just got this soundcard as part of a bargain eBay bundle, definitely giving it a go in Half-Life!

• 
  @MRNOLAB3 күн бұрын

  when i was 14yo in 1994 /1995 a games came out on 5or 6 CD ROM at the time it was very huge for a game... the name of the game was PHANTASMAGORIA ! the game still haunt me the senario was so great and it integrate mini video plyed by real actors.. fantastic game..the story took place in germany near the "black forest" in france we call it "la foret noire" ...great great DOS game if you can try it play it without any help for better expererience :D

• 
  @dumpcake93113 күн бұрын

  Following your instructions and the HDD is corrupted? Should I redo the whole process? Any advice?

• 
  @fixpontt3 күн бұрын

  7:10 there is something wrong with the cinebench screen, this is on paper a real 16 core cpu but cinebench shows 8-core 16-thread which is not the same, so why is that the case?

• 
  @philscomputerlab3 күн бұрын

  AMD made fake cores with this architecture. Some resources are shared so they aren't dedicated real cores...