Пікірлер

• 
  @TNZAD18 сағат бұрын

  Do you have a link to the replacement part??

• 
  @RJLmachinery17 сағат бұрын

  Nope

• 
  @HenAnd-DKКүн бұрын

  Job well done 😮❤

• 
  @bobrose79003 күн бұрын

  I have the course cut and fine cut variants. They are great. Washing with WD40 and a brush can work wonders. What would we do without those flap wheels... they work a treat on flails as well.

• 
  @RJLmachinery16 сағат бұрын

  Nice one, yeh flap disks are great, very handy 👍

• 
  @truth33583 күн бұрын

  Which model is this ?????? You reviewing

• 
  @RJLmachinery16 сағат бұрын

  fm6dd

• 
  @r.j.s.5434 күн бұрын

  Du solltest fett ins Getriebe tun man hört bereits. Sonst geht's kaputt. 😉

• 
  @QuânBui-s6x4 күн бұрын

  Hàng rào đẹp . 😊

• 
  @grahamallen19705 күн бұрын

  At last no bloody screaming two stroke fume belchers 😮

• 
  @gazconnor4 күн бұрын

  Depends what you're cutting. These hedges are knife through butter. Lovely thick hawthorn. Now that's a test

• 
  @jamesylfc96115 күн бұрын

  Nothings changed but time to finish

• 
  @patrickvennard8385 күн бұрын

  Do you put a little thread lock on the nuts just in case they back off?

• 
  @RJLmachinery3 күн бұрын

  No never bothered with that, I dont have any blades anymore that are the adjustable style, they are all fully tightened nuts and bolts.

• 
  @smellmyhaze98526 күн бұрын

  Bit too harsh on the first cut there

• 
  @HenAnd-DK7 күн бұрын

  So satisfying the watch 👍😎💯

• 
  @Darts6547 күн бұрын

  How do you release the blade on the petrol one

• 
  @RJLmachinery7 күн бұрын

  Not sure what you mean mate?

• 
  @mustafakarakurt14668 күн бұрын

  SUPER MERCI

• 
  @RJLmachinery7 күн бұрын

  👍

• 
  @begara64518 күн бұрын

  You did not mention about balancing the blade after sharpening which I presume should be done same as when you sharpen a push mower or lawntractor blade.

• 
  @RJLmachinery7 күн бұрын

  Its hard to balance these as they are not symmetrical. There is a little cut out on one side of the mounting hole which will obviously hinder the results. Buy yes you can try and balance these as best you can. Not quite as important as a mower blade but you certainly wouldnt want these miles out of balance.

• 
  @alanmcdermott41438 күн бұрын

  Thank you very much. So helpful

• 
  @RJLmachinery8 күн бұрын

  Cheers

• 
  @dirkgriese97310 күн бұрын

  Den Rasen Lüften Mit dem Vertikutieree

• 
  @dirkgriese97310 күн бұрын

  Kirsch Lorbeer Hecke Schneiden

• 
  @mariaengster459610 күн бұрын

  Que lindo 👍👍

• 
  @fostersstubbyasmr955711 күн бұрын

  Like butter you must keep your chain really sharp

• 
  @alceopignedoli537214 күн бұрын

  Prrfetto

• 
  @heathercorley453814 күн бұрын

  Thanks for the tutorial. 😊

• 
  @RJLmachinery13 күн бұрын

  @@heathercorley4538 No worries 👍

• 
  @user-jl7jp8tu1y15 күн бұрын

  살수있나요 전화번호 좀 부탁 드립니다

• 
  @user-jl7jp8tu1y15 күн бұрын

  어디서 살수있나요 전화번호 좀 부탁드려요

• 
  @1KWattmizer15 күн бұрын

  May I have the brand name of that Trimmer you use. Model # also. Thank you sir

• 
  @user-jl7jp8tu1y15 күн бұрын

  어디서 ,살수있나요 전화번호 올려주세요

• 
  @1KWattmizer15 күн бұрын

  A very interesting new direction at trimming hedges. Excellent, sir. Thank you

• 
  @amcd5316 күн бұрын

  Great video. Many thanks. I have just bought one of these machines. The PTO to sweeper belt is missing. No problem replacing that. I think the engine to PTO belt may be missing also but I can't be sure. Do you have any details on how to replace the engine to PTO belt. many thanks again.

• 
  @RJLmachinery9 күн бұрын

  Thanks, you will have to remove the deck, then depending on the model, from underneath the bottom drive belt needs to come off the engine shaft pulley, you will have to undo some idler pulleys etc and disconnect the electromagnetic clutch to get the belts off. The PTO belt is normally the top belt closest to the engine.

• 
  @jn240017 күн бұрын

  Whats a flappy disk compared to a regular one?

• 
  @ismaelmoura631417 күн бұрын

  Eu quero é comer o c* do v******* do país tem viado que faz mais gostoso do

• 
  @hardcoretimmy4218 күн бұрын

  You sir are a legend 💪🏼

• 
  @RJLmachinery18 күн бұрын

  👍

• 
  @user-zd6vz2pk9y20 күн бұрын

  Lagarta humana.Anti Natureza!!!!!!!

• 
  @user-zd6vz2pk9y20 күн бұрын

  Estava lindo,a vegetação exuberante.Para que deixar raizes? Pinta o muro de verde, é mais facil para quem não gosta de folhagens!

• 
  @ghoroobB21 күн бұрын

  سلام‌چندسال طول میکشه شمشاد رو که کاشتی اینطور دیوار بشه

• 
  @msk.ebelion-jn3dc21 күн бұрын

  Nice job mate! 👍

• 
  @RJLmachinery21 күн бұрын

  Thanks 👍

• 
  @Kiejstut2121 күн бұрын

  it doesn't take much power to do this so makta is better becasue is lighter

• 
  @RJLmachinery21 күн бұрын

  Yep agree with you there, less noise as well which is a big factor for me these days 👍

• 
  @webbo7321 күн бұрын

  thanks for the video - I've just bought one of these - is there a formula for number of hours usage per grease top up? I will just be using mine at home a few times a year for an hour or two each time so I'm hoping it's something I only have to do every year or two? Also do you recommend lubricating the blades and if so, what do you use?

• 
  @rickhill908421 күн бұрын

  Thanks for showing how to do the complete job.

• 
  @RJLmachinery21 күн бұрын

  No problem, cheers for watching 👍

• 
  @semeriorsencoswui320222 күн бұрын

  Parabéns..isto.e .soviético

• 
  @user-fk7rj8gn3z22 күн бұрын

  Читай Библию Ищи Бога. О Душе Своей Позаботься. Библия Истина. Бог Любит Тебя. Богу Служи. Земная жизнь Временно. Переходи На Путь Божий.

• 
  @armdaggerblade22 күн бұрын

  Is this side-sling type of brush cutter easier on the muscles compared to the traditional backpack type? Also, how does the bike handle compare to the traditional on-the-stick handle when cutting on a slope or tight spaces? How long can you operate it with a full tank?

• 
  @RJLmachinery22 күн бұрын

  For long stints of strimming a bike handle is alot more comfortable than the other options. A tank will last around 1hr maybe, depending on what you are trimming.

• 
  @zoba464521 күн бұрын

  I bought husQvarna 525rx. Light, good harness, very good on slopes. Backpack can be 10 kg. Adjustable harness and handel.

• 
  @zoba464520 күн бұрын

  Husqvarna also doesn't have a lot of vibrations.

• 
  @RJLmachinery17 күн бұрын

  @@zoba4645 Nice one, sounds pretty good 👍

• 
  @user-km6ds6dy9v23 күн бұрын

  Excellent idea, I've been doing it wrong all this time 😞😂😂❤❤❤

• 
  @BentHusum23 күн бұрын

  Bisic

• 
  @user-qh9nh6mt9w25 күн бұрын

  Скульптор❤

• 
  @curious_sausage25 күн бұрын

  Lovely.

• 
  @curious_sausage25 күн бұрын

  And I'm sure I speak for almost everybody: We demand more videos!

• 
  @RJLmachinery21 күн бұрын

  Cheers mate

• 
  @RJLmachinery21 күн бұрын

  Ive got more vids planned, its just finding the time to sort them out 😅

• 
  @OKNSON26 күн бұрын

  Great vid, thanks boss 👊🏻

• 
  @RJLmachinery21 күн бұрын

  cheers 👌

• 
  @mamed-ud3zb26 күн бұрын

  Grt p

• 
  @rickeykeeton477026 күн бұрын

  Does that edger have spacers in it?

• 
  @josenoelmollpepiol142926 күн бұрын

  😂eso es hacer nuestro trabajo para eso nos pagan

• 
  @jorgegiron194827 күн бұрын

  Saludos desde guatemala

• 
  @jorgegiron194827 күн бұрын

  Exelente maquina

• 
  @ln7875 күн бұрын

  9