Пікірлер

• 
  @TexasGal5255 күн бұрын

  Would love to see Laguna, Button Willow, and Sonoma! Thanks for posting TH. Its really helpful and hope you continue making these track guides! <3

• 
  @MonoMoto5 күн бұрын

  I started working on a video for Laguna - sub to get the update when its done

• 
  @qaiserc5 күн бұрын

  Hi there, thank you for putting this video together! Does BMW do the remap or will you have to go somewhere else to get the bike remapped?

• 
  @MonoMoto5 күн бұрын

  you can ride it without a flash as the bike adjusts to the exhaust. but to make it run great and make more power you need to flash it. BrenTune is one of best known flashers

• 
  @qaiserc5 күн бұрын

  Thank you for taking the time to upload this informative video! Very helpful.

• 
  @MonoMoto5 күн бұрын

  Happy to help and thanks for the kind note !

• 
  @trackrats7 күн бұрын

  This is the exact video on Pirelli slicks that the internet needed, thank you for making it!

• 
  @MonoMoto7 күн бұрын

  Thank you 🙏

• 
  @Naptownstreetsquid10 күн бұрын

  Me- running a flipped sc3 on my rear rn 😁

• 
  @MonoMoto10 күн бұрын

  Good way to safe money but don’t tell it to the Pirelli engineers 😅

• 
  @bryanfowler203911 күн бұрын

  No cotter pin

• 
  @MonoMoto11 күн бұрын

  Yes they are only used for racing

• 
  @halimgunawan111712 күн бұрын

  THIS HELPING ME FOR REAL

• 
  @michelepierro597514 күн бұрын

  Can you explain better the difference btw rolling and static and predictive? Many thanks!

• 
  @MonoMoto14 күн бұрын

  Michele Pierro?! Hope you are not Ducati rider else I’d request an autograph 😅 Static : shows the last / best lap only Predictive shows how much you are up / down on your previous best lap

• 
  @michelepierro597513 күн бұрын

  @@MonoMoto haha I wish. Unfortunately I am a Kawasaki rider. Thx for your help, great content!

• 
  @alexanderbogdanov711614 күн бұрын

  Why ratchet? Next time use impact gun to be sure that its tight 😂

• 
  @MonoMoto14 күн бұрын

  😂😂 yes I made it a bit tight 😇

• 
  @41teeth15 күн бұрын

  Great tutorial. Thanks.

• 
  @julienpochet720020 күн бұрын

  Great video!!! Thank you for the clear and complete explanations, it’s chirurgical precision!! I will try to install racing clip-ons on my 23 model! Hope it’s not too different!!

• 
  @seamusblack587622 күн бұрын

  0:47 lower the visor is the most important thing BELIEVE ME

• 
  @sick_s1k25 күн бұрын

  Love this helmet other than this 1 difficult task right here, bell and ls2 have like the easiest removal ever.

• 
  @MonoMoto24 күн бұрын

  Same it’s weird that the previous model was easier to remove the visor

• 
  @sick_s1k23 күн бұрын

  ⁠my thumbs get 1 hell of a workout each time trying to remove this thing to clean the inside of it after getting caught in the rain lol

• 
  @MonoMoto23 күн бұрын

  @@sick_s1k 😋😋 yeah not easy

• 
  @wolfganghokenmaier26 күн бұрын

  Very nice. Thank you. Other videos didn’t show enough detail, this did the trick. My first Shoei helmet and I love it.

• 
  @SergioTrinchera27 күн бұрын

  Perfect 😉 tank's

• 
  @liffeywalk29 күн бұрын

  Hi! Ok, three years in, would you still put the bwttery pack where you did or mount it to the back of the helmet? Worried about heat/ just having a battery so close to my skin. Thank you. Great video. Have the exact same setup.

• 
  @MonoMoto29 күн бұрын

  Yup no problem with the battery at all 😀

• 
  @tristanaragon-nb4iwАй бұрын

  i conectet my sena 30k with my po gro hero 12 but now i cant use the quic app from go pro with my phone

• 
  @MonoMotoАй бұрын

  Sorry I don't have a Sena 30k.

• 
  @xMentoxLP9 күн бұрын

  Hey bro how you connect your 30k with hero 12, mine is not working

• 
  @MbreezySVАй бұрын

  Hello, is the 30-32mm for when you push the chain up or when it’s not being altered.

• 
  @MonoMotoАй бұрын

  It’s between the lowest point when hanging to fully pushed up

• 
  @MbreezySVАй бұрын

  @@MonoMoto oooohh gotcha thank you

• 
  @Jaypapa92Ай бұрын

  What ft lbs to reinstall ? (Torque specs)

• 
  @MonoMotoАй бұрын

  Pre 2022 was 74. Since 2023 it’s 94 ft lbs

• 
  @zxdr1908Ай бұрын

  fucking love you pookie !!!

• 
  @MonoMotoАй бұрын

  😂😂😂

• 
  @zxdr1908Ай бұрын

  @@MonoMoto getting a cool tinted visor for it but didnt know how to take off the original one lmao

• 
  @MonoMotoАй бұрын

  @@zxdr1908 hehe yes they certainly made this one hard to operate.

• 
  @briannegungoll8602Ай бұрын

  Will they still be able to stick on other helmets? If not how?

• 
  @MonoMotoАй бұрын

  What will stick to other helmets ?!

• 
  @MarkObtainАй бұрын

  How many litres of oil did you use?

• 
  @MonoMotoАй бұрын

  It's all in the video. You need to order 4 but won't be using all of it.

• 
  @user-fc6ht6wb1eАй бұрын

  hi! How do you maintain an old moto i used to ride it❤

• 
  @MonoMotoАй бұрын

  The key is it’s not my only bike 😅 I keep her in a garage and always keep the bike nice - for daily riding I have another bike that is a bit more dirty 😂

• 
  @ShopTunes999Ай бұрын

  What bike is this?

• 
  @MonoMotoАй бұрын

  I ride a s1000 RR

• 
  @ShopTunes999Ай бұрын

  @@MonoMoto Ahh that's why i didn't recognize it, I cant afford one LOL :)

• 
  @hellomihaiАй бұрын

  really good topic!

• 
  @MonoMotoАй бұрын

  Thank you 🙏 wanted to add something different for a change :)

• 
  @pgeldzАй бұрын

  Very nice! But doesn't the S2R1000 go to 11,000 RPM? This gauge goes to 12,000, so wouldn't it not be accurate?

• 
  @MonoMotoАй бұрын

  Hah ! wondered how long it would take until somebody notices. Yes it's not accurate, but also the bike doesn't even have a red-line and it's not like I can read the numbers while riding anyway. As the exact numbers don't matter that much I went for it :)

• 
  @pgeldzАй бұрын

  All good! Since they do custom stuff I may ask them if they can do it up to 11k. I'd like to change the color scheme as well :) Incredible video Sir! I wouldn't have even thought to tackle a project like this until I saw your video because I thought the housing was bonded to the case and you had to heat it up and take it apart which I wouldn't want to do. But from your video looks like it just bolts together :)

• 
  @marcosmarquez2926Ай бұрын

  Any reason not to go with evolution tech from the wsbk motorcycles

• 
  @MonoMotoАй бұрын

  I never used them - I bet they are good too :)

• 
  @jesussanjurjo6588Ай бұрын

  Very informative! Great video

• 
  @NathanielNicklasАй бұрын

  Great video. Thank you! Just ordered my x15 and this will be the first mod I’m doing 😎!

• 
  @MonoMotoАй бұрын

  Yes it’s nice that you can take off the sticker on the Matt helmet . Enjoy !

• 
  @NathanielNicklasАй бұрын

  @@MonoMoto How has the Matte finish been holding up for you man? Does it show signs of wearing out ?

• 
  @MonoMotoАй бұрын

  @@NathanielNicklas no issues at all. Had a X14 for 5 years already and that one also shows no issues with the finish. Just make sure to keep em clean and not to use any chemicals on it.

• 
  @Florian24Ай бұрын

  Hi Armin, den SC2 kannste vergessen als Hinterreifen, haelt nicht lange und grippt wenig. Fuer Endurance gleich zum SC3. Ansonsten nur SC1 hinten. Vorne fahre ich bei allen temps den SC2 auf der BMW

• 
  @MonoMotoАй бұрын

  Stimmt schon das wenn’s warm ist und der Fahrer schnell ist sc2 Front und sc1 hinten super ist. Das inverse setup ist aber Einsteiger freundlicher :) Lange nicht mehr von dir gehört ! Hoffe alles bestens .

• 
  @ibbuuu465Ай бұрын

  Thanks ❤

• 
  @Asskicker41582Ай бұрын

  Great info. 🙏

• 
  @MonoMotoАй бұрын

  Glad it was helpful!

• 
  @phantombigballs8165Ай бұрын

  Tightened the oil filter up to 231 hugga duggaas.. Ffs torque it up probably 11nm

• 
  @lerenardsubtil4474Ай бұрын

  Thank you!

• 
  @christoffer1973Ай бұрын

  in a house it will use more battery.. because it search for GPS satellites... in a house it's not good signal and it use more battery

• 
  @MonoMotoАй бұрын

  I follow your logic, but it's not like a smartphone where they can make the signal stronger, as GPS is only for receiving. I don't think a GPS chip consumes a lot more energy by searching vs receiving GPS data during use, but I have no data on this and am just assuming.

• 
  @robertlee8042Ай бұрын

  My sena phone 1 is paired with my phone. Can I use sena phone 2?

• 
  @MonoMotoАй бұрын

  No idea - give it a try and let us know.

• 
  @MattValenciaАй бұрын

  Great video! Thanks! You did a great job and I am a road motorcycle rider too and I’m just venturing out off road and bought my first set of Anakee Adventure tires. Stay safe out there.

• 
  @MonoMotoАй бұрын

  Right on!

• 
  @alejandrofloresmontes3335Ай бұрын

  What size is the crush washer?

• 
  @MonoMotoАй бұрын

  16MM aluminum crush ring

• 
  @MrPhipsi74Ай бұрын

  A couple of questions: How do you set the Sena to "turn on" the audio? Does it just record any audio from the Sena once it's connected, or do you have to push buttons on the Sena? I know that VOX works with the intercom, but I don't know if it works for anything paired as a phone. Also, if it's paired to the Sena, but you aren't talking, does the GoPro revert to its internal mic? Have you been able to pair the GoPro AND a phone to the Sena?

• 
  @MonoMotoАй бұрын

  My Sena 10R can only pair to one phone connection at a time. So it's either Gopro or phone but not both for me. The Sena is just used by the GoPro as a bluetooth mic, so once connected it will record everything from the sena mic.

• 
  @mek9262Ай бұрын

  From upkeep and finish durability wise, which one would you go for Matt Black or Gloss Black?

• 
  @MonoMotoАй бұрын

  I had a few matt and glossy Shoei helmets and always find it easier to keep the matt ones clean looking. Durability wise, if you treat them well I had no shoei finish to fail on me even after 5+ years.

• 
  @mendingmotos2 ай бұрын

  Do you happen to know the size of the battery bolts(Size, Length and Pitch)? I just got a used one and don't have the correct bolts. Wanted to go grab bolts instead of ordering from bmw

• 
  @MonoMoto2 ай бұрын

  I don’t but if you call your local bmw parts guy they be able to look it up for you .

• 
  @headhuntersixx81642 ай бұрын

  I found out that cutting those corners at 3 & 4, having a good suspension setup is crucial when going over that bumpy section to keep speed up.

• 
  @MonoMoto2 ай бұрын

  good suspension is one of the things that really makes you faster on track , not a fancy full exhaust :)

• 
  @jonathanhill64122 ай бұрын

  You are amazing!!

• 
  @SomeDudeOnline2 ай бұрын

  I may have been on the west side of the track that night. A while b ack at thunderhill west I did a track day and got hardly any sleep because of the wind. Ended up leaving my tent at like 2 AM to sleep in my car. Very uncomfortable but at least I got some Zs.

• 
  @MonoMoto2 ай бұрын

  Could be ! Yes going fast and bad sleep don't mix well :)

• 
  @markrich96192 ай бұрын

  Did you put the Sena on intercom pairing?? couldn't quite hear

• 
  @MonoMoto2 ай бұрын

  It was phone pairing.

• 
  @markrich96192 ай бұрын

  @@MonoMoto thanks

• 
  @markrich96192 ай бұрын

  Got the Sena SMH10R, Iphone 13, BMW Nav 6 and GoPro Hero 12 on the way, first three are connected atm but lots of fun no doubt once I pair the Hero 12

• 
  @RedlineFeline2 ай бұрын

  OMG THANK YOU!!!!!

• 
  @mendingmotos2 ай бұрын

  So helpful ! Thank you

• 
  @Petert89862 ай бұрын

  Fantastic Thanks

• 
  @MaverickM12 ай бұрын

  S2R 800 owner here. Nice video, it seems to be a very enjoyable ride. I love my S2R, switched from a 999s becasue of my age (50) and yes, I still my that 999s (it is in my opinion the pinnacle of motorbikes) but the S2R is more versatile and still much fun. Thinking about a front brake upgrade since the 999s was a (torque and) brake beast and I miss that front brake feeling. It was night and day compared to the S2R oem or my previous bikes (sv650 curvy and R1 2005), did any stops/slowdowns with a single finger easy peasy, so I will try a 4 pot caliper setup on the Monster soon. Stopping is more important than acceleration. Ride safe guys!