I'm having trouble with the top. How did you get it to work?
@LawrenceWebb-f9d5 күн бұрын
How did you get the top on?
@telecomwiz20047 күн бұрын
Quite possibly the least helpful assembly video on YT and far less helpful than the pictogram assembly manual. Shaky palsy hands and 20 seconds of pitch black uselessness somehow and abject buffoonery. But hey, not only were we graced with a demo on how to use a driver, we got a link for a dewalt driver that can be purchased anywhere in America.
@BeyondtheBoom7 күн бұрын
Thanks for watching
@solotraveler38 күн бұрын
I recently booked this hotel for my October stay. Glad I came across your video. I like an older place so this looks great for me.
@BeyondtheBoom7 күн бұрын
It's a great place to stay
@vinnypowell998215 күн бұрын
The problem I have is on my Maytag top load bravos that after my rinse cycle on the “normal” setting it’s suppose to start the spin cycle, but it does not spin, so if I just switch the large knob from “normal” to “rinse and spin” everything is good. You think it’s the spin actuator in that case as well?? Thanks
@BeyondtheBoom9 күн бұрын
Sounds like controller
@helmialmorisi15 күн бұрын
What causes the APS light to appear after changing the brake pads?
@BeyondtheBoom9 күн бұрын
Did you bleed the system?
@mauriciozamarripa844517 күн бұрын
This guy sucks!
@gingiszoo19 күн бұрын
Glad I found you! Very clear and easy directions. Now I need to order part and try this out.🤞
@BeyondtheBoom9 күн бұрын
Link is in the description
@joshuatodd231924 күн бұрын
This is definitely not step by step bad bad job
@BeyondtheBoom23 күн бұрын
Thanks for watching
@LauraCharpentier-ye8tg24 күн бұрын
I just found this. My Mother's maiden name is Mulkey and this may be her (and my) family history. Thank you, we are planning a trip!
@BeyondtheBoom23 күн бұрын
Thanks for watching. Try some of the local bbq places for dinner.
@LauraCharpentier-ye8tg19 күн бұрын
@@BeyondtheBoom I am always up for a good BBQ!!
@miguelovalle312329 күн бұрын
Gracias señor 🎉
@BeyondtheBoom26 күн бұрын
You're welcome
@WKelleyLucas_KustomScattergunsАй бұрын
Thanks for the video... Gonna fix mine. So sad that appliances are such garbage these days.
@BeyondtheBoom23 күн бұрын
Agreed. I've actually had to add another one as well.
@RetroBernerАй бұрын
Nice, I'll have to get a new switch for mine this week, thanks!
@BeyondtheBoomАй бұрын
Link in the description
@RyanSells4UАй бұрын
Thanks for the video
@BeyondtheBoomАй бұрын
Thanks for watching
@terrybarnes0712Ай бұрын
Awesome video Brother i never Been to Dollywood, but my wife said she went years ago with family and said it was fun She loved the Roller Coaster
@BeyondtheBoomАй бұрын
You two should take a trip down. You'd enjoy it. Thanks Terry
@im1who84uАй бұрын
Was cooking on this same burner when it just turned off and stopped heating. I am going to assume the burner is still good and it's the switch that went bad and I'll replace the switch. If anyone thinks different, please feel free to comment. This is the burner and switch that gets used the most.
@BeyondtheBoomАй бұрын
The switch might be the problem
@im1who84uАй бұрын
@@BeyondtheBoom Thanks, I ordered the switch and already have it. With shipping and tax it came to $68.00 I looked at the switch and I can't believe it cost them more than $10.00 to produce, but oh well. It's better than buying a new stove or calling _The Guy_ to come out and fixe it for $200.00 Thanks for putting this video together. I've fixed so many of my own appliances by watching videos like yours..... and that translate into money saved.
@merikatools568Ай бұрын
Tractors be like women....a couple of pumps of lube never hurt
@mangopog9814Ай бұрын
I’ve eat a cokes anytime we go to Russell Srings they have the best catfish I’ve EVER EAT, matter of fact I live four hours away in Tennessee and have made vacation at Russell Springs just because of Coes Catfish, but being from Jamestown is my childhood home where I grew up.
@BeyondtheBoomАй бұрын
This was the first time I had ate there.
@michaelmaravilla9051Ай бұрын
Will the actuator failing cause washer not to cycle to rinse and spin ?
@BeyondtheBoomАй бұрын
It will cause it not to spin
@terrybarnes0712Ай бұрын
Great video Boom Thanks for Sharing Be safe and God bless
@BeyondtheBoomАй бұрын
Thanks Terry. I've got a few more videos coming from down there. It's a fun place if you ever get the chance to go.
@quarters-eye8922Ай бұрын
Beautiful place. 👍👍👍
@BeyondtheBoomАй бұрын
Thanks for watching.
@barbaragregory5598Ай бұрын
Mine sounds like it stuck between drain and spin. I have unplugged and plugged back in and sounds like at the end of drain but at end of that no spin and no lights on panel with what cycle it is on. Is that the actionator or clutch.
@BeyondtheBoomАй бұрын
Not sure but replacing both is easy
@zczczczcclif7769Ай бұрын
Thank you
@BeyondtheBoomАй бұрын
Thanks for watching
@MuseLeathercraftАй бұрын
Thank You SO MUCH! Our repair guy told us that basically if HE put a new switch in it would go bad and maybe not help at all. Your video will help ME fix it simply. I wish I’d watched you video a year ago! 😊 G
@BeyondtheBoomАй бұрын
Thanks for watching Gordon
@leanonme4loveАй бұрын
So when I read reviews on Amazon I get scared what do you recommend?
@BeyondtheBoomАй бұрын
Depending on what your machine is doing, clean it out and change the thermal fuse at least
@jamesoetken2564Ай бұрын
What is the spin part for a white spin actuator?
@BeyondtheBoomАй бұрын
I wouldn't have any idea. You might try a search for your particular model.
@bedegomaАй бұрын
Thanks, that was a real help.
@BeyondtheBoomАй бұрын
Thanks for watching
@michaelbarngrover5139Ай бұрын
On our top value faded and you have the same one we have I can’t find anything that shows it can you please show what it says? If you still have it
@BeyondtheBoomАй бұрын
Unfortunately it is not readable anymore
@classic2872 ай бұрын
I had to use a puller for mine....
@BeyondtheBoomАй бұрын
That can happen at times.
@htorres430042 ай бұрын
anyone know the name or part number for the SINGLE controller
@dchawaiiballer2 ай бұрын
Thanks for the video. Everything works, but my radio doesn’t turn off with ignition. If I forget to manually turn off it drains my battery. Do you know the problem?
@BeyondtheBoomАй бұрын
You didn't connect the harness adapter correctly
@corinadrury57682 ай бұрын
Ok I’m a woman and that should say enough… was trying to learn how to put this together STEP BY STEP.. but saying “ see I put this here’ and it’s already together DOES NOT HELP ughhhhhh!!! I need to see HOW each step is done smdh
@telecomwiz20047 күн бұрын
@@corinadrury5768 absolutely useless
@garys55402 ай бұрын
Ther goes my diet! Thaks Boom! All you fault! hehehe nice one buddy. Stay safe and healthy!
@BeyondtheBoom2 ай бұрын
You won't be disappointed Gary
@user-vb6qr6jf9j2 ай бұрын
Nice
@BeyondtheBoom2 ай бұрын
Thanks for watching.
@BIgBass2552 ай бұрын
How has this company stayed in business with such horrible appliances.?????
@BeyondtheBoom2 ай бұрын
People buy stuff cheap because they can't afford anything else.
@Shuttlepod17012 ай бұрын
I was in the church Sat and it had alot of debris in it. I grew up not living very far from it.
@BeyondtheBoom2 ай бұрын
Very cool.
@dialdude2 ай бұрын
Thanks for the simple, easy to follow video. I have the same issue and it fixed it fast.
@BeyondtheBoom2 ай бұрын
Glad to hear it helped. It's a simple repair.
@juanchobaldo88482 ай бұрын
Very good video thanks 👍
@BeyondtheBoom2 ай бұрын
Thanks for watching.
@garys55402 ай бұрын
Thanks Boom. Nice one bud! Stay safe and healthy!
@BeyondtheBoom2 ай бұрын
Thanks Gary. You also my friend
@terrybarnes07122 ай бұрын
Awesome Boom Love to have a Cabinet like this in My tool shed Thanks for Sharing
@BeyondtheBoom2 ай бұрын
Thanks Terry. It's nothing too fancy but it works for what I needed.
@larbisemsem8912 ай бұрын
❤❤❤👍👍👍 Thank you
@BeyondtheBoom2 ай бұрын
Thanks for watching and please subscribe for more
@fldave6122 ай бұрын
3:12 Intersystem bonding termination is required everywhere for per the NEC for bonding of phones, CATV, TV antennas, etc., also depending on the location, any steel framework of the structure (steel studs/trusses, rebar, etc.) and metal water pipes must also be bonded to the earth grounding components the electrical system. 4:11 I totally agree with you regarding copper, I too would rather spend the extra cost and not have to worry about the issues as well as the extra steps needed with aluminum wire. 5:59 Just a clarification, the bonding screw and/or strap is used ONLY if that panel is the first point of disconnect for the structure, if there is another subpanel downstream being fed from the first point of disconnect, you MUST remove the bonding screw and separate the neutrals and the grounds from each other.
@BeyondtheBoom2 ай бұрын
Yep. I've talked about that in other videos. The inspection passed with flying colors.
@jennaswitzer25963 ай бұрын
When my top load Maytag washer is filling up, it makes a short hum or buzz and does one loud click. Agitator still agitates ( we just replaced the actuator because it was not agitating, but this buzzing started before it stopped agitating) we also replaced the drive hub and splutches. Any ideas? I cannot find any videos reciprocating what my washer is doing. Model number- MVWC565FW1
@BeyondtheBoom2 ай бұрын
The click may be the valve opening for water or the shift actuator. We ended up eventually replacing this because it went out again.
@gingn923 ай бұрын
What about if all burners stay on high? Is it still a switch issue? Thanks!
@BeyondtheBoom2 ай бұрын
If it happened all at once, you might want to have someone check it. There could be a serious electrical issue.
@Nweaver073 ай бұрын
Thanks! 🎉
@BeyondtheBoom2 ай бұрын
No problem!
@dougs83483 ай бұрын
My issue is if I put the washer on normal cycle it wont drain all the water out and wont spin them dry but if you select spin drain or spin rinse it will work that way just not on regular cycles
@fathercreep3 ай бұрын
This is basically what mine is doing, but sometimes it will work on normal wash cycle, sometimes not.
@BeyondtheBoom2 ай бұрын
We ended up getting a new washer due to this one having other issues.
@vinnypowell998215 күн бұрын
I have this same issue on my Maytag bravos when on normal cycle it drains the water but then does nothing when it’s suppose to spin. If I switch cycle to “rinse and spin” everything is fine. You ever find a solution?
@Luis_sd_wrx3 ай бұрын
One of my burner's turns on then you can hear a low clicking sound then it turns off how can I troubleshoot this please help..
@BeyondtheBoom2 ай бұрын
Replace the switch.
@bertdrake3 ай бұрын
Thanks, this was a really insightful video for me.
@BeyondtheBoom2 ай бұрын
Glad to hear it!
@sandygiles83073 ай бұрын
Thank you for mentioning about it being a dual switch for that burner.
@BeyondtheBoom2 ай бұрын
There is a difference in the switches if you need to replace one, make sure it is the right replacement.
Пікірлер
I'm having trouble with the top. How did you get it to work?
How did you get the top on?
Quite possibly the least helpful assembly video on YT and far less helpful than the pictogram assembly manual. Shaky palsy hands and 20 seconds of pitch black uselessness somehow and abject buffoonery. But hey, not only were we graced with a demo on how to use a driver, we got a link for a dewalt driver that can be purchased anywhere in America.
Thanks for watching
I recently booked this hotel for my October stay. Glad I came across your video. I like an older place so this looks great for me.
It's a great place to stay
The problem I have is on my Maytag top load bravos that after my rinse cycle on the “normal” setting it’s suppose to start the spin cycle, but it does not spin, so if I just switch the large knob from “normal” to “rinse and spin” everything is good. You think it’s the spin actuator in that case as well?? Thanks
Sounds like controller
What causes the APS light to appear after changing the brake pads?
Did you bleed the system?
This guy sucks!
Glad I found you! Very clear and easy directions. Now I need to order part and try this out.🤞
Link is in the description
This is definitely not step by step bad bad job
Thanks for watching
I just found this. My Mother's maiden name is Mulkey and this may be her (and my) family history. Thank you, we are planning a trip!
Thanks for watching. Try some of the local bbq places for dinner.
@@BeyondtheBoom I am always up for a good BBQ!!
Gracias señor 🎉
You're welcome
Thanks for the video... Gonna fix mine. So sad that appliances are such garbage these days.
Agreed. I've actually had to add another one as well.
Nice, I'll have to get a new switch for mine this week, thanks!
Link in the description
Thanks for the video
Thanks for watching
Awesome video Brother i never Been to Dollywood, but my wife said she went years ago with family and said it was fun She loved the Roller Coaster
You two should take a trip down. You'd enjoy it. Thanks Terry
Was cooking on this same burner when it just turned off and stopped heating. I am going to assume the burner is still good and it's the switch that went bad and I'll replace the switch. If anyone thinks different, please feel free to comment. This is the burner and switch that gets used the most.
The switch might be the problem
@@BeyondtheBoom Thanks, I ordered the switch and already have it. With shipping and tax it came to $68.00 I looked at the switch and I can't believe it cost them more than $10.00 to produce, but oh well. It's better than buying a new stove or calling _The Guy_ to come out and fixe it for $200.00 Thanks for putting this video together. I've fixed so many of my own appliances by watching videos like yours..... and that translate into money saved.
Tractors be like women....a couple of pumps of lube never hurt
I’ve eat a cokes anytime we go to Russell Srings they have the best catfish I’ve EVER EAT, matter of fact I live four hours away in Tennessee and have made vacation at Russell Springs just because of Coes Catfish, but being from Jamestown is my childhood home where I grew up.
This was the first time I had ate there.
Will the actuator failing cause washer not to cycle to rinse and spin ?
It will cause it not to spin
Great video Boom Thanks for Sharing Be safe and God bless
Thanks Terry. I've got a few more videos coming from down there. It's a fun place if you ever get the chance to go.
Beautiful place. 👍👍👍
Thanks for watching.
Mine sounds like it stuck between drain and spin. I have unplugged and plugged back in and sounds like at the end of drain but at end of that no spin and no lights on panel with what cycle it is on. Is that the actionator or clutch.
Not sure but replacing both is easy
Thank you
Thanks for watching
Thank You SO MUCH! Our repair guy told us that basically if HE put a new switch in it would go bad and maybe not help at all. Your video will help ME fix it simply. I wish I’d watched you video a year ago! 😊 G
Thanks for watching Gordon
So when I read reviews on Amazon I get scared what do you recommend?
Depending on what your machine is doing, clean it out and change the thermal fuse at least
What is the spin part for a white spin actuator?
I wouldn't have any idea. You might try a search for your particular model.
Thanks, that was a real help.
Thanks for watching
On our top value faded and you have the same one we have I can’t find anything that shows it can you please show what it says? If you still have it
Unfortunately it is not readable anymore
I had to use a puller for mine....
That can happen at times.
anyone know the name or part number for the SINGLE controller
Thanks for the video. Everything works, but my radio doesn’t turn off with ignition. If I forget to manually turn off it drains my battery. Do you know the problem?
You didn't connect the harness adapter correctly
Ok I’m a woman and that should say enough… was trying to learn how to put this together STEP BY STEP.. but saying “ see I put this here’ and it’s already together DOES NOT HELP ughhhhhh!!! I need to see HOW each step is done smdh
@@corinadrury5768 absolutely useless
Ther goes my diet! Thaks Boom! All you fault! hehehe nice one buddy. Stay safe and healthy!
You won't be disappointed Gary
Nice
Thanks for watching.
How has this company stayed in business with such horrible appliances.?????
People buy stuff cheap because they can't afford anything else.
I was in the church Sat and it had alot of debris in it. I grew up not living very far from it.
Very cool.
Thanks for the simple, easy to follow video. I have the same issue and it fixed it fast.
Glad to hear it helped. It's a simple repair.
Very good video thanks 👍
Thanks for watching.
Thanks Boom. Nice one bud! Stay safe and healthy!
Thanks Gary. You also my friend
Awesome Boom Love to have a Cabinet like this in My tool shed Thanks for Sharing
Thanks Terry. It's nothing too fancy but it works for what I needed.
❤❤❤👍👍👍 Thank you
Thanks for watching and please subscribe for more
3:12 Intersystem bonding termination is required everywhere for per the NEC for bonding of phones, CATV, TV antennas, etc., also depending on the location, any steel framework of the structure (steel studs/trusses, rebar, etc.) and metal water pipes must also be bonded to the earth grounding components the electrical system. 4:11 I totally agree with you regarding copper, I too would rather spend the extra cost and not have to worry about the issues as well as the extra steps needed with aluminum wire. 5:59 Just a clarification, the bonding screw and/or strap is used ONLY if that panel is the first point of disconnect for the structure, if there is another subpanel downstream being fed from the first point of disconnect, you MUST remove the bonding screw and separate the neutrals and the grounds from each other.
Yep. I've talked about that in other videos. The inspection passed with flying colors.
When my top load Maytag washer is filling up, it makes a short hum or buzz and does one loud click. Agitator still agitates ( we just replaced the actuator because it was not agitating, but this buzzing started before it stopped agitating) we also replaced the drive hub and splutches. Any ideas? I cannot find any videos reciprocating what my washer is doing. Model number- MVWC565FW1
The click may be the valve opening for water or the shift actuator. We ended up eventually replacing this because it went out again.
What about if all burners stay on high? Is it still a switch issue? Thanks!
If it happened all at once, you might want to have someone check it. There could be a serious electrical issue.
Thanks! 🎉
No problem!
My issue is if I put the washer on normal cycle it wont drain all the water out and wont spin them dry but if you select spin drain or spin rinse it will work that way just not on regular cycles
This is basically what mine is doing, but sometimes it will work on normal wash cycle, sometimes not.
We ended up getting a new washer due to this one having other issues.
I have this same issue on my Maytag bravos when on normal cycle it drains the water but then does nothing when it’s suppose to spin. If I switch cycle to “rinse and spin” everything is fine. You ever find a solution?
One of my burner's turns on then you can hear a low clicking sound then it turns off how can I troubleshoot this please help..
Replace the switch.
Thanks, this was a really insightful video for me.
Glad to hear it!
Thank you for mentioning about it being a dual switch for that burner.
There is a difference in the switches if you need to replace one, make sure it is the right replacement.
Thank you! This seems easy enough to repair.
It's very easy.