Пікірлер

• 
  @liszcgsedt4 сағат бұрын

  Yea, seen a bambu in a maker faire, the noise is the main reason it never got to my shortlist, a no-go in my small apartment. Although the x1 mini sounds fair, actually, and I would have considered it against an MK4 I am now assembling.

• 
  @StudioKinbla16 сағат бұрын

  Thank you for this quick tutorial! I've sculpted prints for clients before, but I had never dealt with multicolor printers until my latest, and this was just the overview I needed to better understand how that worked. Good stuff

• 
  @CarlosDiaz-wh4jb3 күн бұрын

  Where does the sound come from?

• 
  @boukhfouad20954 күн бұрын

  you deserver a kiss in the forehead

• 
  @AndyBro3Dprints5 күн бұрын

  can you do a in-depth video on sharing 3mf files on maker world?

• 
  @dhebert1115 күн бұрын

  Here's a suggestion, embed some LED's into that thing, embed a few spots for power/battery, a Bluetooth receiver & chip, and I think you'd have something that's at least marketable?

• 
  @CarnivoreChris895 күн бұрын

  Designed my own coasters in a few minutes using these tips! Printing the first one right now. Great tutorial, very inspirational!

• 
  @dominickreyes61815 күн бұрын

  Great vid!

• 
  @BryanHubble-rx5hz6 күн бұрын

  There are Many other ways to slice in multicolor even without an AMS.. but a good basic overview to show some options..

• 
  @77Ridin6 күн бұрын

  i cant seem to get blender to keep accurate scale. I set scale like you show to 0.001 and then create a cube i set it 40mm x 40mm x 8mm and then I select top face and do inset face and then tell it to inset 3mm. When I measure it using measuring tool it shows 5.6mm

• 
  @TuffyDK7 күн бұрын

  Thanks, thats the way to do it, and not as others says it "use Ctrl + J"

• 
  @micver10917 күн бұрын

  Why is everybody buying BEARINGS just print them to. They work just fine

• 
  @lukeedwards19267 күн бұрын

  i can honestly say this is the most helpful tutorial for blender i've come across, with all the keybindings being shown and the pace of the video not too quick. Thanks mate!

• 
  @alex.drinks.water.8 күн бұрын

  Is this printer still loudlike this? What's a good alternative that's quieter?

• 
  @Nat-20-Nonsense9 күн бұрын

  you DEFINTLY earned a sub

• 
  @RTXPCINDIA9 күн бұрын

  buy why edge look black ? how to change ?

• 
  @pcread10 күн бұрын

  Thanks!

• 
  @Heirieh6167211 күн бұрын

  Nicely done

• 
  @josephlopez326711 күн бұрын

  Your review is very biased.. I noticed every new 3d printer is trying to compare to prusa... I got a Prusa mini for that reason , and I don't want to deal with companies that will go out of business in a couple years .. I know Prusa started long ago and they will stay in business more than the other companies...

• 
  @JustSara9211 күн бұрын

  I thought that was a garlic crusher before you said it was a phone stand 😅😂

• 
  @user-nw2gw8gt8r11 күн бұрын

  This is great! The most clear and has a constant flow of info, thank you so much!

• 
  @urkkiburkki314411 күн бұрын

  Thanks for the help mate!

• 
  @Xanderviceory12 күн бұрын

  This showed me just the right amount of things to get started in the fastest time possible. Perfect tutorial 10/10

• 
  @soup.pirate13 күн бұрын

  My nozzle is stuck and now the wrenches just slide off it

• 
  @Slushyandslushpopvr13 күн бұрын

  Tysm bro I just got a 3d printer looking forward to see what I can print bc I’m really good at blender

• 
  @YouCanFixIt13 күн бұрын

  Is there a way to get this scale and units to open in this way each time blender is opened.

• 
  @TheImaginaryGuy14 күн бұрын

  Dude! you just taught me in 60 seconds how to do something I was trying to do all yesterday. Thanks.

• 
  @sherlynthornton675114 күн бұрын

  Question: when joining objects should you always use the Boolean or can you use the join (the command you used to join the three hole cutters)? Will it mess up a 3d print if you’ve used the join rather than Boolean?

• 
  @christopherwhitcomb623314 күн бұрын

  Totally improper nozzle change that leads to clogs. That Bowden gotta be sealed to nozzle under pressure and you’ll get a year out of a nozzle

• 
  @brandonbeery248414 күн бұрын

  Ironically I came here after posting on Facebook and you told me the same thing on Facebook. You should make a tutorial video!

• 
  @bikersoncall15 күн бұрын

  A gear I'm working on now (not 3D) is module 5, and about 13 teeth it is only 6mm in diameter, so it sounds like your 1.5 module is barely visible without a microscope. shrugs....

• 
  @amburrosedesigns975216 күн бұрын

  But Fusion is a pay per (month/year) utility though, so it's not only $10 for the add-on, but an additional $85 (for a month use) to use...YIKES, I am downloading the limited personal use one to see if this will do -- fingers crossed that it will.

• 
  @TheBaldieCrewOfficial18 күн бұрын

  ty

• 
  @nathanbeavis245718 күн бұрын

  This was the best explanation video I’ve ever seen

• 
  @Frank94118 күн бұрын

  I am a marine 😂 what has that got to do with anything? He is really tough picking on a kid. His road rage will get him into serious trouble one day when he picks on a small guy that can fight. Try that shit on me and I can guarantee he won’t be posting the video afterwards, he will delete it and jerk off crying with his PTSD

• 
  @CliffordFenser19 күн бұрын

  Very good content

• 
  @AlwaysEast19 күн бұрын

  Very cool

• 
  @savekillqqpsounds847319 күн бұрын

  my blender does not have the hole cutter object

• 
  @savekillqqpsounds847319 күн бұрын

  how do i see the diffrent dimensions of diffrent plates once it got extrudet? i need to know how large the inside area of my container is and how thick the walls are i dont know how to check that

• 
  @StarLabs3D20 күн бұрын

  Good information🇦🇶

• 
  @linneasjostrand57120 күн бұрын

  boss!

• 
  @storm14k21 күн бұрын

  Thanks for the vid! Blender looks SO much easier to work with now. It's almost like working with a vector image app.

• 
  @H_True21 күн бұрын

  Extremely helpful! Thank you for all the good information. You explained it all very well!

• 
  @dodge123521 күн бұрын

  I tried this on an stl file and nothing happened,i tried it with the cube to cut a square hole,any ideas.

• 
  @seanlevifreerider995622 күн бұрын

  Awesome dude I have K1c 2 days first time print and model elec parts perfect because of your videos keep going 🎉

• 
  @jasonvelasquez555122 күн бұрын

  I did thus for an stl and the entire file went black shadow of the stl file. What foes it mean and how do I fix it.

• 
  @channelsold323622 күн бұрын

  I've said it before and say it again the mechanisms of a multi wrecking ball conversion will change the game that's basically the same equilibrium 💡 💡

• 
  @channelsold323622 күн бұрын

  that's incredible 3d printing is becoming a new shaped finder physically 💡 💡

• 
  @bendtherules022 күн бұрын

  How do you create a animation after that (where it rotates automatically)?

• 
  @urielmihura507723 күн бұрын

  what a king, finished my master's thesis with this

• 
  @HyrumO_0723 күн бұрын

  Short, sweet, and to the point. Best tutorial I've seen that's time efficient. No time was wasted. Nice work!