Kicker makes plug and play tweeters. Going to upgrade mine soon on my new crosstrek
@kratos7678 Жыл бұрын
Got a base 2021 crosstrek any idea how to install? seems to be a plug underneath the housing for the tweeter not sure if it’s for speakers tho. Got a harness and it’s not the right fit.
@michaelagatone88632 жыл бұрын
Does that speaker really just sit in there without being secured in? I’ve had a nasty dash rattle since new from that area. I wonder if this is it.
@kaichen79072 жыл бұрын
Let me know if your rattle is from the speaker mounting screws. I have a nasty rattle from that general area on the passenger side dash speaker. Will attempt it this weekend to see if the screws worked themselves loose. Props to Katherine for attempting this and sharing.
@sixgundave2 жыл бұрын
That sure is a squishy dashboard. And im going to be doing this very job on a '17 Impreza soon, same dashboard. Swapping those tweeters in for Kicker KS 2.75" ones, which come with Subaru mounting plates out of the box.
@trekcrossca15873 жыл бұрын
Great video heads up there's after market plugs that will adapt ur stock speakers to aftermarket ones. I found them on Amazon there called RED WOLF. Also when I did might I took the side piler cover off before I tackled the B! As$ speaker cover. Well good luck
@katherineg7796 Жыл бұрын
Good tip!
@sosak783 жыл бұрын
Can you tell me what type of crossover and why you have used? I have seen some Crosstrek upgrades, but nobody used this, just replace the original dashboard speakers.
@andytheffboy3 жыл бұрын
they're just capacitors that come with the speakers when you buy them. It acts as a crossover by filter out they low ends.
@trekcrossca15873 жыл бұрын
So they came in the box it wasn't something u had to by separate? Thank u
@rexnhogz4 жыл бұрын
I tried 3.5 in wrx. they dont fit. id recommend 2.75 mopar oem or sundown.
@rmblwgn4 жыл бұрын
Hey could you tell me size infinity speaker that was and did it screw down without modification to the original mounting holes
@andytheffboy3 жыл бұрын
should be 3.5 inches and variety of holes on the speaker mounts to screw right into the factory holes
@mzradzi4 жыл бұрын
what are the size for Subaru Crosstrek Dash Speaker
@andytheffboy3 жыл бұрын
it'll fit up to 3.5 inches
@jimmylang80394 жыл бұрын
It's a tough spot to work in. I will solder and heat shrink when I dig into my dash. Those twist caps aren't good in something that bounces and moves. Just a thought. Who knows it may last you forever but in Detroit we have F'd up roads
@jimmylang80394 жыл бұрын
Your a rare breed of woman who just works on her car 👍👍👍 Outstanding
@berthajorkins7 ай бұрын
You're* 👍👍👍
@nickfitzgerald46224 жыл бұрын
pretty straight forward. can you provide a link to the speakers used?
Пікірлер
did those wires stay in place ?
Kicker makes plug and play tweeters. Going to upgrade mine soon on my new crosstrek
Got a base 2021 crosstrek any idea how to install? seems to be a plug underneath the housing for the tweeter not sure if it’s for speakers tho. Got a harness and it’s not the right fit.
Does that speaker really just sit in there without being secured in? I’ve had a nasty dash rattle since new from that area. I wonder if this is it.
Let me know if your rattle is from the speaker mounting screws. I have a nasty rattle from that general area on the passenger side dash speaker. Will attempt it this weekend to see if the screws worked themselves loose. Props to Katherine for attempting this and sharing.
That sure is a squishy dashboard. And im going to be doing this very job on a '17 Impreza soon, same dashboard. Swapping those tweeters in for Kicker KS 2.75" ones, which come with Subaru mounting plates out of the box.
Great video heads up there's after market plugs that will adapt ur stock speakers to aftermarket ones. I found them on Amazon there called RED WOLF. Also when I did might I took the side piler cover off before I tackled the B! As$ speaker cover. Well good luck
Good tip!
Can you tell me what type of crossover and why you have used? I have seen some Crosstrek upgrades, but nobody used this, just replace the original dashboard speakers.
they're just capacitors that come with the speakers when you buy them. It acts as a crossover by filter out they low ends.
So they came in the box it wasn't something u had to by separate? Thank u
I tried 3.5 in wrx. they dont fit. id recommend 2.75 mopar oem or sundown.
Hey could you tell me size infinity speaker that was and did it screw down without modification to the original mounting holes
should be 3.5 inches and variety of holes on the speaker mounts to screw right into the factory holes
what are the size for Subaru Crosstrek Dash Speaker
it'll fit up to 3.5 inches
It's a tough spot to work in. I will solder and heat shrink when I dig into my dash. Those twist caps aren't good in something that bounces and moves. Just a thought. Who knows it may last you forever but in Detroit we have F'd up roads
Your a rare breed of woman who just works on her car 👍👍👍 Outstanding
You're* 👍👍👍
pretty straight forward. can you provide a link to the speakers used?