Пікірлер

• 
  @Crack-a-Code3 күн бұрын

  Really appreciated this ... would have liked close up of the whole chart. (For those who would say ... Just google it, Yes, I know I can google it)

• 
  @EverythingEsala9 күн бұрын

  impressive vdo.

• 
  @jimmysingh755610 күн бұрын

  Water resistance with IPX4

• 
  @trenttgreenaway414820 күн бұрын

  What about hood mounted lights? Ok the bonnet of the car?

• 
  @mrcarexpert2020 күн бұрын

  Bro are u serious ? You touched the cable with hands and multimeter ? When u doing Ohm test u can’t hold the multimeter contact pin because it will give u reading

• 
  @stevenpiper97021 күн бұрын

  For all types of road crews Michigan has gone to Amber and Green. Could make a killing selling green/amber to the state and every city, town and private company that does road work in Michigan.

• 
  @godzilla6490Ай бұрын

  So is a NOCO Lithium battery at IP66 a good buy for my van?

• 
  @markmendez3380Ай бұрын

  can they be shipped to the USA

• 
  @nlanwebbАй бұрын

  How can dust get in but not water?

• 
  @mgb...Ай бұрын

  my gen 1 didnt even last 15months. one of the LEDS just dimmed itself so now i have the Gen2. so will let you guys know how this set goes

• 
  @LeoDarwinI2 ай бұрын

  Super and sample ❤

• 
  @nevrsurender2 ай бұрын

  no USA dealers?

• 
  @Joh7502 ай бұрын

  terrible explanation

• 
  @matman55983 ай бұрын

  Get a new voice that put me to sleep

• 
  @tylertran93nsx3 ай бұрын

  Do you have a video of the 8 inch led bar at night?

• 
  @C.PFirdaus3 ай бұрын

  Is that being applied for phones only or being applied for electrical scooters too?

• 
  @rm02343 ай бұрын

  Handy video

• 
  @Espiritiv3 ай бұрын

  You didn't actually tell us how to calculate the fuse size needed. You only told us how to calculate the amperage of our system

• 
  @anthonyt4981Ай бұрын

  you dont calculate the fuse rating. you decide what fuse to run based on calculated amperage... thats why he said either 30a or 40a in his example. the size has to be higher than the amp draw or youll blow the fuse.

• 
  @John_Doe....3 ай бұрын

  Nicely explained, I was wondering what causes a problem when you touch a lightbulb. 👍

• 
  @and5266253 ай бұрын

  Shame they are no good on a 7.5 fiesta ST, light output is poor, instructions are average and when i emailed narva i got zero response

• 
  @reihanachmadsusilo74553 ай бұрын

  what is the standard size for container cars?

• 
  @user-gv3nv7jd5p4 ай бұрын

  So if you change the customisation trims to red means you're pissed off at those with Adventure Kings 9" spotties haha 😁😂👍

• 
  @John-Deere4 ай бұрын

  We have this sort of set up in our Semi to run the APU, the problem is the APU will run the secondary batteries down then it will run the main batteries down so the truck won't start. What do you think the problem would be, the main batteries shouldn't run down. There are four batteries for the starter and four for the APU all hooked in parallel and they all run down. The starter batteries are 1 year old.

• 
  @PhunkBustA4 ай бұрын

  you know what else is dangerous, sitting around and doing nothing

• 
  @davegunner86424 ай бұрын

  Excellent description

• 
  @ricstormwolf5 ай бұрын

  This video was massively helpful. Thank you 👍👍

• 
  @alijandro115 ай бұрын

  I just installed the gen 2 h11 LEDs in my 2012 Nissan X-Trail. While the light is bright and white in colour, it seems to flicker. Are they meant to be flickering?

• 
  @fernandoharo16613 ай бұрын

  Mine flicker too, and I have the h7 gen 2 they stop flickering whe I accelerate

• 
  @markv89553 ай бұрын

  No! more than likely a canbus issue, or less likely an electrical supply issue. You could use a load resistor to fix the flickering issue, but then it would not be plug & play as advertised.

• 
  @dreamingofdirtndiesel1595 ай бұрын

  I’m pretty sure all driving lights need a separate switch by law. Been like that for decades

• 
  @greeny12934 ай бұрын

  not true, only non ADR approved ones require that in QLD

• 
  @DrewArmstrong-uy7ilКүн бұрын

  Yes they have a separate switch. Instead of having one on the dash you switch them via an app on a phone.

• 
  @AustraliaExperiencePtyLtd5 ай бұрын

  I bought a narva 7 pin flat socket and it wont work on my nissan 7 pin. There are 8 wires, gray seems to be extra. Original nissan has a fuse. How do I fix that?

• 
  @oleg65175 ай бұрын

  It would be really nice if you could add also simple wiring scheme to explain what you are talking about/

• 
  @Maxo187445 ай бұрын

  Heya guys, I want to test the crankshaft sensor and purge valve solenoid on my Mazda 3 2006, but am unsure of what numbers my multimeter would tell me for each component as to whether they do or don't work correctly. Many thanks 👍🏻

• 
  @markmendez33805 ай бұрын

  2 questions...Do you ship to the USA and will you plan on getting Amber/White?

• 
  @mitchellclinch87896 ай бұрын

  Are you making the Optimax LED is RED or Blue? Would be a great update to the rear of a CFA Tanker.

• 
  @adamt2536 ай бұрын

  Thanks Adam! Your videos are a great learning source. Adam

• 
  @ethanjarrett57006 ай бұрын

  Couple questions. What's the weight and distance on the 30 inch single and double row lightbar? Cheers.

• 
  @clashcon116 ай бұрын

  I'm here for ip rating for phone, but at least the more I know the more I confused. Thanks.

• 
  @jahanshahjayhoon93916 ай бұрын

  All of them just to hurt drivers eyes which used standard headlights .

• 
  @amjadzwaid48996 ай бұрын

  What happens if you have new alternator and new main battery but you are still getting12.6 voltage while car is running?

• 
  @mitendoshi98517 ай бұрын

  What is the watt for Surefit Gen 2 globes?

• 
  @signal12hvac7 ай бұрын

  you do know that there is no such thing as an LED Strobe light! LED's and strobes are 2 totally different technologies

• 
  @fradaja7 ай бұрын

  Hi thanks for the info , this is all new to me , all vsrs seem to have very high ratings (140amp), I’ve always fitted 30 to 40 amp relays in a split charge system , my current alternator is 70amp , I’m concerned about damaging my alternator , can you enlighten me ?

• 
  @dannykhalaf66537 ай бұрын

  The light are very very fade???

• 
  @MrSnakeboy12347 ай бұрын

  Just fitted Surefit GEN 11 H7 18437P. I feel the are 50% lower output then standard globes. Beam cutoff is correct. I would not recommend Narva LED globes at all.

• 
  @lambrosh40724 ай бұрын

  You put bult in projector or reflector headlihg?Led bults is not good for projetctor,because the ligth is not 360 like halogen or xenon,and has dark sport areas.Uniforrmity is not good.

• 
  @chrisb58397 ай бұрын

  So if you have a 140a alternator, will the relay send 140a to the leisure battery? Most dc to dc chargers only output around 20-50amps, so will using a VSR charge the leisure battery quicker? 🤔

• 
  @adrienbertrand63027 ай бұрын

  I get a 14ohm reading before even touching the probes to anything, Is it normal ?

• 
  @markthompson11347 ай бұрын

  how do i know if my metor is reading correctley

• 
  @DeadlyDigger7 ай бұрын

  Do they come in red

• 
  @narvalighting7 ай бұрын

  unfortunately not!

• 
  @the_curry_cruiser8 ай бұрын

  The Android app fails to let me log in.

• 
  @liamcooper52028 ай бұрын

  Had my interest right up until you only have 1 kelvin option for the lights.

• 
  @dtejada19888 ай бұрын

  😎👍🏼