i cant wait till mine come!!!! i ordered some black mediums last night. i hvent found one negative review! thanks for the content brother!!!
@Martz604 Жыл бұрын
Hey great video! Do you still make videos and/ or skate these Razors SLs? I have been looking at the Razors SL a lot lately and also have the Oysi mediums. I was thinking of pairing them! Thanks.
@Rugerrounds Жыл бұрын
I’m currently skating SLs with ground control flt 4. I swap between those and the oysi.
@133samuelsinaterollc4 Жыл бұрын
How did you install the inner wheels, I'm not able to install them without damaging the spacers
@Rugerrounds Жыл бұрын
Are the spacers already set in place in the frames? Are they completely pushed in?
@133samuelsinaterollc4 Жыл бұрын
@@Rugerrounds yes
@133samuelsinaterollc4 Жыл бұрын
@@Rugerrounds on my previous pair of oysi frames, I had to smash the inner wheels in which damaged the spacers
@Rugerrounds Жыл бұрын
I’m not sure about that. I’ve had some tight tolerances but nothing bad enough to damage the spacers. I’ve had three pair and two of the pair were extremely tight. I used a rag to wrap a pair of channel locks to clamp them in. I couldn’t get the wheels in until the spacers were completely pushed in. I hope that helps!
@benadams85252 жыл бұрын
What size shell by the way? Look sick with the white soul
@Rugerrounds2 жыл бұрын
8-9 shell. Thanks!
@vinceamir72362 жыл бұрын
Nice review!!! I love 50/50 on SL, i think this is a great groove macht. Big groove on boots and small on frame. With my Gen i prefer the opposite bigger groove on the frame.
@alexs53942 жыл бұрын
do you think these would be good for learning transition skating? I'm currently on a freestyle setup and love the extra space for grinding ledges, but skating transitions it feels weird. my goal with coping is to try topsides.
@Rugerrounds2 жыл бұрын
Absolutely. The length of these frame plus the slight rocker is perfect for transition. I would recommend the max wheel size. Topsides shouldn’t be an issue.
@samolhok9303 жыл бұрын
how are the 9-8 shells for fit I am a 273mm i fit the Shift 8-9 shell i was wondering if the fit is similar?
@Rugerrounds3 жыл бұрын
Sorry I’m a little confused on the question. The shift does fit more narrow that the razor SL
@samolhok9303 жыл бұрын
@@Rugerrounds ok i was just wondering if the SLs were tighter fitting thanks
@uliseshgr3 жыл бұрын
Hi there. Have you tried the Ground Control HD 60mm frames? I am a medium level skater and I am interested in the GC 60mm or maybe the Oysi Medium Chassis but I don't know which is better. I usually skate in skate parks (Bowl, Rail, Copping). I would really appreciate to know your opinion. Thanks in advance.
@Rugerrounds3 жыл бұрын
I have not skated those yet but I skated aluminum Sola frames for a long time. If you are medium level I would probably stick to the oysi medium chassis with the biggest wheel setup you can make fit. Aluminum frames feel incredible but if you skate any concrete ledges they can slide slower. I think that the oysi frame are just better and more versatile frames. I hope that helps. Good luck!
@uliseshgr3 жыл бұрын
@@Rugerrounds Thank you very much for your kind and prompt reply. A coach that I know gave me a similar opinion, my remaining concern is about tight turns. Sometimes I tend to lean too far and slip on the soul plate (SEBA CJ or USD VII). Do you think the thickness of the Oysi frames is too much of a problem? Thanks again and greetings from Mexico.
@Rugerrounds3 жыл бұрын
@@uliseshgr those skates do have large soul plates so I would use big wheels on the oysi frames. I don’t think you would slide out. Thanks for checking out the video! Hasta luego
@uliseshgr3 жыл бұрын
@@Rugerrounds I am deeply grateful and please keep uploading your videos. Excellent work.
@Holisticnursedan3 жыл бұрын
Will these require any modifications on a valo boot?
@Rugerrounds3 жыл бұрын
You might need to slightly dremel the toe and heel
@rollingdubaiguy64153 жыл бұрын
Great review! I just found your channel and subscribed. I value your opinion because obviously you have skated a lot of frames and you are a talented skater. I've made this comment to many KZreadrs who skate with a helmet and here I go again, it's always good to see skilled bladers wear a helmet! Keep up the good content.
@Rugerrounds3 жыл бұрын
Awersome! Thank you for the compliments! Keep shredding!
@art0nblades3 жыл бұрын
Great review! Couldn't agree more, it's an awesome frame that I've just rediscovered today after skating solas and ftl3s for a while.
@Rugerrounds3 жыл бұрын
Thank you!
@OnnoKaell3 жыл бұрын
Any feedback on the Kaltik V.2 Frame? I would love to see reviews on all your frames!
@Rugerrounds3 жыл бұрын
Onno Kaell I really liked the v2 frames. I skates them for about a year. I got the first batch and they had some issues which made them less fun. They were slightly warped and the axles holes were oversized so they rolled really slow. The groove is great on them though. I’ll probably revisit them eventually. Thanks!
@OnnoKaell3 жыл бұрын
Rugerrounds thank 🙏 you for the honest 👍 reply 👊✌️
@chicodisco26123 жыл бұрын
Kaltik v.2 vs Oysi medium, Which one would you choose and why?
@Rugerrounds3 жыл бұрын
ChicodiscO 2 oysi medium by far. The kaltik v2 are great but they have the same issues kaltik has always had. Loose fitting hardware that makes them feel slower, slow plastic that does slide well and flex’s too much and also I had one of the ufs mounts break on them. The only advantage of the kaltik is the wheel options. Oysi medium are leaps and bounds ahead in quality, groove shape and durability.
@chilli-iceolive-abode24474 жыл бұрын
These just became available in the UK this weekend and I've got my bubblegum pink pair on the way! I'm glad we're slowly getting more colour back in our products, cuz I'm not a fan of just black. I'm hoping next release of these frames they do a pair in purple. Dreading the installation, everybody I've spoken to has struggled. There's even a skate shop in the US that is apparently not recommending people try themselves and they're doing it for a charge... Ain't got that luxury here, but I'm sure I'll manage. ✌️
@Rugerrounds3 жыл бұрын
Chilli-Ice Olive-Abode oysi Just released a video on installation that has some very helpful tips. Glad you got them they are such good frames!
@murielchansons4 жыл бұрын
omg I just got these frames, and this product is seriously flawed. I got the spacers in, but when I attach the frame to the skate, i cant get the inner wheels in! the frame with spacers seems to be too narrow for the wheels/bearings to fit in. Do you maybe have any advice how te get the bearings inbetween the spacers? I'm getting really frustrated here haha.
@Rugerrounds3 жыл бұрын
Sorry I’m just seeing this. Did you ever get your problem solved?
@ShogunWarrior363 жыл бұрын
@@Rugerrounds I had the same problem with the inner wheels and had to resort to tapping them in with a hammer...
@chilli-iceolive-abode24473 жыл бұрын
Kaltik stealth savosin ilia is the latest frame I've found to be super tight, which is funny cuz on the kaltik flat V2 I found the opposite bit loose and sloppy.
@iam_f.o.n4 жыл бұрын
i know they make two sizes in the Mediums so do i just get the bigger one for large 908? size 12
@Rugerrounds3 жыл бұрын
Sorry I’m just seeing this. Definitely go with the larger size.
@iam_f.o.n3 жыл бұрын
@@Rugerrounds yeah I got the larger mediums. I love em!
@bravotwozero24434 жыл бұрын
저도같은거로하나샀어용
@MatthewHunsaker4 жыл бұрын
You rock! Thank you for being informative:) This link thuroshop.com/products/create-originals-hardware?_pos=1&_sid=da0a0ebfa&_ss=r is where i found that the Oysi Medium frames are solid. The hardware spacers which came from Cletus is a more large gauge than usual
@a.caguax784 жыл бұрын
What is your foot size in cm and what size reigns did you get ?
@Rugerrounds4 жыл бұрын
Andrew Cabezudo my foot measures 26.5 on my left foot and 26 on my right foot. These are size 10.5 US
@swissblader80374 жыл бұрын
Your reviews are awesome. Thank you very much!
@Rugerrounds4 жыл бұрын
Swiss blader thank you! I guess I will do more in the future.
@optran47814 жыл бұрын
I’m loving my medium frames! So I was wondering how the reign v3 compares to the v2? I tried and love the intuitions but it was a tad too small feeling and hurt my feet after a while. I’m a 6-7 shell tried the small intuition and currently have sz 8 reign v2 which seem ok so far.
@Rugerrounds4 жыл бұрын
op tran in my opinion the reign v2 feels way less comfortable than the v3. I had the reign v2 in my aeons and Thems and just didn’t like the feel of it. They gave me pressure points and I didn’t feel like they had support in the right places. The v3 are flexible where they need to be and are way more comfortable in the area on top of my foot. I hope this helps.
@optran47814 жыл бұрын
Rugerrounds I think the only discomfort I get is prob in the toe area in the v2. I think the v3 with neoprene might help with that, i like how ridged the v2 feels other wise. I guess I’ll just see if I can get a hold of v3s and find out for myself. Thanks again!
@133samuelsinaterollc4 Жыл бұрын
How did you fit your inner wheels
@mbs02224 жыл бұрын
Great review!! Thanks😁
@Rugerrounds4 жыл бұрын
mbs0222 thank you!
@scottkelley044 жыл бұрын
Nice review Pandy, look forward to another one in 2023 🤣
@Rugerrounds4 жыл бұрын
Scott Kelley 😂😂😂 the oysi extra smal
@SaschaReichertVideoBlog4 жыл бұрын
nice review, give you a Abo :)
@GeorgeWPush4 жыл бұрын
Thanks for the review! What are your thoughts on the Oysi med vs Sola? Particularly the royale angle
@Rugerrounds4 жыл бұрын
Bourgeois Cyborg I was skating the newer h block on the Sola’s. It felt a little bit more drastic on them mainly because of the stiffness of the aluminum frame. The new oysi h block groove is shaped differently now and feels very gradual on the SL
@Rugerrounds4 жыл бұрын
Bourgeois Cyborg also I will say the Sola is my second favorite setup
@davefoff4 жыл бұрын
How do they fit/feel compared to SL's?
@Rugerrounds4 жыл бұрын
Dave FivelStone they are slimmer in the toe box but similar in the inside length.
@nicholaswest91465 жыл бұрын
Never really seen your edits before dude. Nice man.
@DannyTheDad5 жыл бұрын
Im gonna check some out
@Rugerrounds5 жыл бұрын
Danny Garcia great skates man you should.
@yumadapaka5 жыл бұрын
what kind of liner are you using? did you cut your cuff? where did you get your straps? sorry for the questions. i really like your set up.
@Rugerrounds5 жыл бұрын
yumadapaka those are my fit fat boy liners, stock cuffs and remz straps. All are available at oak city skate shop. Hope that helps!
@ondrautk5 жыл бұрын
Hello i want to change the stock liners for my fits like you did are those my fit fatboys? Mid or high?
@Rugerrounds5 жыл бұрын
ondrautk they are the myfit fat boy in size 9us
@ondrautk5 жыл бұрын
@@Rugerrounds and do you recommend them for shifts? My issue with the razors liner is that long, almost to toes tongue slips out the liner most of the times i put skates on and beacause of that theres no room between liner and shell in that part, you just cant fit the tongue back in and its super uncomfortable. My fits seems to have this tongue issue covered for me. So im just asking for your thoughts and overall feel. Thank you
@Rugerrounds5 жыл бұрын
ondrautk yes definitely. The new ones come with the lace up tongue which helps a lot. I added another footbed though because the my fit liners are pretty thin. It helps it fill the shell better. Hope that helps.
@ondrautk5 жыл бұрын
@@Rugerrounds it does thank you!
@articcircleado5 жыл бұрын
I'm sold -- I'm literally ordering a pair Monday
@AlternativeOutcast6 жыл бұрын
Im new to skating, I was about to buy these and was wondering how big the white wheels were.
@Rugerrounds6 жыл бұрын
AlternativeOutcast they are 65mm GO Project joe Atkinson wheels
@Rugerrounds6 жыл бұрын
AlternativeOutcast check with the owner of the shop you are ordering from to make sure you get a wheel size that fits.
@AlternativeOutcast6 жыл бұрын
Thanks a lot man. (:
@Suspense7476 жыл бұрын
Great video!
@lovethebladers4life6 жыл бұрын
Good review. Next time just make the music a bit softer. Its hard to hear when you talk
@Rugerrounds6 жыл бұрын
lovethebladers4life thanks for the comment. I was really disappointed watching it the first time on my phone. It sounded completely different on my computer. I’m going to try to upload it again.
@RyanTimms6 жыл бұрын
SICK REVIEW
@CliffDaSikk6 жыл бұрын
thx for the nice review!! can you tell how the stiffness of the razors shift cuffs is compared to the aeon? i have the aeon 60 and it is an awesome skate but i would like to have a little more flex to the side for royals etc ...
@Rugerrounds6 жыл бұрын
CliffDaVinci I have only skated the aeon 72 and hated the cuffs on them because they were so stiff. The shift has mush more flex that the aeon.
@clipsforshare6 жыл бұрын
😀
@LukeGuitar12076 жыл бұрын
How long laces need to be to able to wrap them around cuff like you did?
@Rugerrounds6 жыл бұрын
Lukas S I think these are 96”
@LukeGuitar12076 жыл бұрын
Thanks, I just got shifts 2 skated them today and they are a bit to flexy for me so need to do that. I will get me some 200 cm laces then.
@Hashass1n6 жыл бұрын
What strap are you running on these?
@Rugerrounds6 жыл бұрын
Hashass1n those are remz straps
@defbored6 жыл бұрын
Dang. I ain't seent a rugerrounds edit in a long time.
@Rugerrounds6 жыл бұрын
defbored haha hopefully getting back to it. Life has been hectic.
@lukawiingaard-madsen57126 жыл бұрын
Size?
@Rugerrounds6 жыл бұрын
Grazz Beer they are size 9 with a size 9 my fit fat boy liner. I wear a size 10.5 shoe.
@RazorsSkateCompany6 жыл бұрын
Thank you for your support! Happy to hear you dig em!
@dst82486 жыл бұрын
72MM IS THE TRUE GOD.
@shroomzys8 жыл бұрын
You still using those CRS frames - I was interested in getting them, any feedback? Sick skating btw, respect from London.
@Rugerrounds8 жыл бұрын
Thanks! I'm actually not skating them anymore. They had warping issues and I had to stop using them.
@CrazytacoFilms18 жыл бұрын
Keep it up, you guys are really good. Nice sesh :)
@mowgl_i8 жыл бұрын
Can't believe this was 2 years ago seems like 5 months ago
@rojman1239 жыл бұрын
What park was this?
@Rugerrounds9 жыл бұрын
Mekos skatepark in hampton va
@scottkelley049 жыл бұрын
Mekos
@rojman1239 жыл бұрын
I went to northside early in the morning...I'm glad I remember how to fall
@Rugerrounds9 жыл бұрын
You probably were! I have been trying to get that on film for a while.
@rojman1239 жыл бұрын
I ran into you guys near the Trashmore skate park. This park looks pretty good and I think I'll check it out. Here' my set-up: Rollerblade Solo Troopers with the Kizer level 2 powerblade frames. I think I'll put the original frames back on, but I'm not used to anti-rocker at all.
@Rugerrounds9 жыл бұрын
Thanks man! Hit up Andy Downs or Willie vallera on facebook and we can meet you out there!
@Rugerrounds9 жыл бұрын
Thanks man! Hit up Andy Downs or Willie Vallera on Facebook and we will meet up!
Пікірлер
i cant wait till mine come!!!! i ordered some black mediums last night. i hvent found one negative review! thanks for the content brother!!!
Hey great video! Do you still make videos and/ or skate these Razors SLs? I have been looking at the Razors SL a lot lately and also have the Oysi mediums. I was thinking of pairing them! Thanks.
I’m currently skating SLs with ground control flt 4. I swap between those and the oysi.
How did you install the inner wheels, I'm not able to install them without damaging the spacers
Are the spacers already set in place in the frames? Are they completely pushed in?
@@Rugerrounds yes
@@Rugerrounds on my previous pair of oysi frames, I had to smash the inner wheels in which damaged the spacers
I’m not sure about that. I’ve had some tight tolerances but nothing bad enough to damage the spacers. I’ve had three pair and two of the pair were extremely tight. I used a rag to wrap a pair of channel locks to clamp them in. I couldn’t get the wheels in until the spacers were completely pushed in. I hope that helps!
What size shell by the way? Look sick with the white soul
8-9 shell. Thanks!
Nice review!!! I love 50/50 on SL, i think this is a great groove macht. Big groove on boots and small on frame. With my Gen i prefer the opposite bigger groove on the frame.
do you think these would be good for learning transition skating? I'm currently on a freestyle setup and love the extra space for grinding ledges, but skating transitions it feels weird. my goal with coping is to try topsides.
Absolutely. The length of these frame plus the slight rocker is perfect for transition. I would recommend the max wheel size. Topsides shouldn’t be an issue.
how are the 9-8 shells for fit I am a 273mm i fit the Shift 8-9 shell i was wondering if the fit is similar?
Sorry I’m a little confused on the question. The shift does fit more narrow that the razor SL
@@Rugerrounds ok i was just wondering if the SLs were tighter fitting thanks
Hi there. Have you tried the Ground Control HD 60mm frames? I am a medium level skater and I am interested in the GC 60mm or maybe the Oysi Medium Chassis but I don't know which is better. I usually skate in skate parks (Bowl, Rail, Copping). I would really appreciate to know your opinion. Thanks in advance.
I have not skated those yet but I skated aluminum Sola frames for a long time. If you are medium level I would probably stick to the oysi medium chassis with the biggest wheel setup you can make fit. Aluminum frames feel incredible but if you skate any concrete ledges they can slide slower. I think that the oysi frame are just better and more versatile frames. I hope that helps. Good luck!
@@Rugerrounds Thank you very much for your kind and prompt reply. A coach that I know gave me a similar opinion, my remaining concern is about tight turns. Sometimes I tend to lean too far and slip on the soul plate (SEBA CJ or USD VII). Do you think the thickness of the Oysi frames is too much of a problem? Thanks again and greetings from Mexico.
@@uliseshgr those skates do have large soul plates so I would use big wheels on the oysi frames. I don’t think you would slide out. Thanks for checking out the video! Hasta luego
@@Rugerrounds I am deeply grateful and please keep uploading your videos. Excellent work.
Will these require any modifications on a valo boot?
You might need to slightly dremel the toe and heel
Great review! I just found your channel and subscribed. I value your opinion because obviously you have skated a lot of frames and you are a talented skater. I've made this comment to many KZreadrs who skate with a helmet and here I go again, it's always good to see skilled bladers wear a helmet! Keep up the good content.
Awersome! Thank you for the compliments! Keep shredding!
Great review! Couldn't agree more, it's an awesome frame that I've just rediscovered today after skating solas and ftl3s for a while.
Thank you!
Any feedback on the Kaltik V.2 Frame? I would love to see reviews on all your frames!
Onno Kaell I really liked the v2 frames. I skates them for about a year. I got the first batch and they had some issues which made them less fun. They were slightly warped and the axles holes were oversized so they rolled really slow. The groove is great on them though. I’ll probably revisit them eventually. Thanks!
Rugerrounds thank 🙏 you for the honest 👍 reply 👊✌️
Kaltik v.2 vs Oysi medium, Which one would you choose and why?
ChicodiscO 2 oysi medium by far. The kaltik v2 are great but they have the same issues kaltik has always had. Loose fitting hardware that makes them feel slower, slow plastic that does slide well and flex’s too much and also I had one of the ufs mounts break on them. The only advantage of the kaltik is the wheel options. Oysi medium are leaps and bounds ahead in quality, groove shape and durability.
These just became available in the UK this weekend and I've got my bubblegum pink pair on the way! I'm glad we're slowly getting more colour back in our products, cuz I'm not a fan of just black. I'm hoping next release of these frames they do a pair in purple. Dreading the installation, everybody I've spoken to has struggled. There's even a skate shop in the US that is apparently not recommending people try themselves and they're doing it for a charge... Ain't got that luxury here, but I'm sure I'll manage. ✌️
Chilli-Ice Olive-Abode oysi Just released a video on installation that has some very helpful tips. Glad you got them they are such good frames!
omg I just got these frames, and this product is seriously flawed. I got the spacers in, but when I attach the frame to the skate, i cant get the inner wheels in! the frame with spacers seems to be too narrow for the wheels/bearings to fit in. Do you maybe have any advice how te get the bearings inbetween the spacers? I'm getting really frustrated here haha.
Sorry I’m just seeing this. Did you ever get your problem solved?
@@Rugerrounds I had the same problem with the inner wheels and had to resort to tapping them in with a hammer...
Kaltik stealth savosin ilia is the latest frame I've found to be super tight, which is funny cuz on the kaltik flat V2 I found the opposite bit loose and sloppy.
i know they make two sizes in the Mediums so do i just get the bigger one for large 908? size 12
Sorry I’m just seeing this. Definitely go with the larger size.
@@Rugerrounds yeah I got the larger mediums. I love em!
저도같은거로하나샀어용
You rock! Thank you for being informative:) This link thuroshop.com/products/create-originals-hardware?_pos=1&_sid=da0a0ebfa&_ss=r is where i found that the Oysi Medium frames are solid. The hardware spacers which came from Cletus is a more large gauge than usual
What is your foot size in cm and what size reigns did you get ?
Andrew Cabezudo my foot measures 26.5 on my left foot and 26 on my right foot. These are size 10.5 US
Your reviews are awesome. Thank you very much!
Swiss blader thank you! I guess I will do more in the future.
I’m loving my medium frames! So I was wondering how the reign v3 compares to the v2? I tried and love the intuitions but it was a tad too small feeling and hurt my feet after a while. I’m a 6-7 shell tried the small intuition and currently have sz 8 reign v2 which seem ok so far.
op tran in my opinion the reign v2 feels way less comfortable than the v3. I had the reign v2 in my aeons and Thems and just didn’t like the feel of it. They gave me pressure points and I didn’t feel like they had support in the right places. The v3 are flexible where they need to be and are way more comfortable in the area on top of my foot. I hope this helps.
Rugerrounds I think the only discomfort I get is prob in the toe area in the v2. I think the v3 with neoprene might help with that, i like how ridged the v2 feels other wise. I guess I’ll just see if I can get a hold of v3s and find out for myself. Thanks again!
How did you fit your inner wheels
Great review!! Thanks😁
mbs0222 thank you!
Nice review Pandy, look forward to another one in 2023 🤣
Scott Kelley 😂😂😂 the oysi extra smal
nice review, give you a Abo :)
Thanks for the review! What are your thoughts on the Oysi med vs Sola? Particularly the royale angle
Bourgeois Cyborg I was skating the newer h block on the Sola’s. It felt a little bit more drastic on them mainly because of the stiffness of the aluminum frame. The new oysi h block groove is shaped differently now and feels very gradual on the SL
Bourgeois Cyborg also I will say the Sola is my second favorite setup
How do they fit/feel compared to SL's?
Dave FivelStone they are slimmer in the toe box but similar in the inside length.
Never really seen your edits before dude. Nice man.
Im gonna check some out
Danny Garcia great skates man you should.
what kind of liner are you using? did you cut your cuff? where did you get your straps? sorry for the questions. i really like your set up.
yumadapaka those are my fit fat boy liners, stock cuffs and remz straps. All are available at oak city skate shop. Hope that helps!
Hello i want to change the stock liners for my fits like you did are those my fit fatboys? Mid or high?
ondrautk they are the myfit fat boy in size 9us
@@Rugerrounds and do you recommend them for shifts? My issue with the razors liner is that long, almost to toes tongue slips out the liner most of the times i put skates on and beacause of that theres no room between liner and shell in that part, you just cant fit the tongue back in and its super uncomfortable. My fits seems to have this tongue issue covered for me. So im just asking for your thoughts and overall feel. Thank you
ondrautk yes definitely. The new ones come with the lace up tongue which helps a lot. I added another footbed though because the my fit liners are pretty thin. It helps it fill the shell better. Hope that helps.
@@Rugerrounds it does thank you!
I'm sold -- I'm literally ordering a pair Monday
Im new to skating, I was about to buy these and was wondering how big the white wheels were.
AlternativeOutcast they are 65mm GO Project joe Atkinson wheels
AlternativeOutcast check with the owner of the shop you are ordering from to make sure you get a wheel size that fits.
Thanks a lot man. (:
Great video!
Good review. Next time just make the music a bit softer. Its hard to hear when you talk
lovethebladers4life thanks for the comment. I was really disappointed watching it the first time on my phone. It sounded completely different on my computer. I’m going to try to upload it again.
SICK REVIEW
thx for the nice review!! can you tell how the stiffness of the razors shift cuffs is compared to the aeon? i have the aeon 60 and it is an awesome skate but i would like to have a little more flex to the side for royals etc ...
CliffDaVinci I have only skated the aeon 72 and hated the cuffs on them because they were so stiff. The shift has mush more flex that the aeon.
😀
How long laces need to be to able to wrap them around cuff like you did?
Lukas S I think these are 96”
Thanks, I just got shifts 2 skated them today and they are a bit to flexy for me so need to do that. I will get me some 200 cm laces then.
What strap are you running on these?
Hashass1n those are remz straps
Dang. I ain't seent a rugerrounds edit in a long time.
defbored haha hopefully getting back to it. Life has been hectic.
Size?
Grazz Beer they are size 9 with a size 9 my fit fat boy liner. I wear a size 10.5 shoe.
Thank you for your support! Happy to hear you dig em!
72MM IS THE TRUE GOD.
You still using those CRS frames - I was interested in getting them, any feedback? Sick skating btw, respect from London.
Thanks! I'm actually not skating them anymore. They had warping issues and I had to stop using them.
Keep it up, you guys are really good. Nice sesh :)
Can't believe this was 2 years ago seems like 5 months ago
What park was this?
Mekos skatepark in hampton va
Mekos
I went to northside early in the morning...I'm glad I remember how to fall
You probably were! I have been trying to get that on film for a while.
I ran into you guys near the Trashmore skate park. This park looks pretty good and I think I'll check it out. Here' my set-up: Rollerblade Solo Troopers with the Kizer level 2 powerblade frames. I think I'll put the original frames back on, but I'm not used to anti-rocker at all.
Thanks man! Hit up Andy Downs or Willie vallera on facebook and we can meet you out there!
Thanks man! Hit up Andy Downs or Willie Vallera on Facebook and we will meet up!
Some pretty sick skating!