Hi, how do I scale if my scales in archicad are different?
@ar.rajeshpatil9639Күн бұрын
@@brightkanda9831 you mean if the ArchiCAD layout data with different printing scales is imported in CAD software then or something else?
@chakshusuthar96333 ай бұрын
Sir, what is the method for multiple copy? "Arrow++" - How to do this?
@ar.rajeshpatil96393 ай бұрын
Use basic command like drag Ctrl+D and then press Ctrl key once to change drag mode into drag a copy mode. For multiple copy instead of Ctrl press Ctrl+Alt key together you will get ++ mode. All this if you using windows based AC. All such hotkeys are listed next to the command name in pulldown menu or mouse right click context menu.
@mrfreeze883 ай бұрын
Can't hear you! SPEAK UP
@ar.rajeshpatil96393 ай бұрын
Sorry for the inconveniences. Kindly use headphones as my earlier recordings were having some issues in sound quality. Same has been mentioned below the video discription. Kindly co-operate. Thanks
@jerushangungui99154 ай бұрын
Thank you for this!
@ar.rajeshpatil96394 ай бұрын
You are welcome 😊
@enkhasper5 ай бұрын
Looks good, but I cannot replicate the effect. My line gets spotted with uneven light.
@prisciladouradoarquitetura47555 ай бұрын
Rajesh, thank you so much! Saved me!!!
@ar.rajeshpatil96395 ай бұрын
You are most welcome 🙏😊
@arquitetozapata77678 ай бұрын
hello there. So good, thanks, Have a question : How can I make a horizontal light effect ? I've tried to turn the vertical line, but I'm not getting it
@ar.rajeshpatil96398 ай бұрын
Just select the inserted liner light in 3D window and use the magenta node hotspots to get the desired effects.
@arquitetozapata77678 ай бұрын
@@ar.rajeshpatil9639 I understood, but unfortunately (I don't know why reason) it only allows me to rotate in x, y axis, but not in z axis, to put it horizontally. What is the secret to get it?
@user-ev2lj1eo4d9 ай бұрын
автор ты лучший!!!
@ar.rajeshpatil96399 ай бұрын
Большое спасибо!
@vu.discovery9 ай бұрын
amazing...how can I take surveyors data from global map into ArchiCad ... thank u so much this tutorial
@ar.rajeshpatil96394 ай бұрын
Thanks for the compliment, means a lot 😊
@jingoallanjude11 ай бұрын
Greetings from Kigali, Rwanda. This is good reminder on some basics we forget. A question. How can the quantities for the arches or lintels be captured under the schedules generated by Archicad. If so, can we get various details like length, volume, surface area etc. Thank you
@ar.rajeshpatil963910 ай бұрын
Hello, sorry for delay in reply. You can extract the needful information in Schedules > elements by adding required fields from Library part parameters But calculating volume or surface area of such parts is not possible directly inside ArchiCAD. Can be done in Excel. Hope this will solve your problem.
@jingoallanjude11 ай бұрын
Greetings from Kigali, Rwanda. Nice technique I have learnt today. Aug 2023 keep up the good work.
@ar.rajeshpatil963911 ай бұрын
Hi, thanks for appreciation. It means a lot for me 🙏 😊
@roycemanning940611 ай бұрын
'PromoSM' 🤤
@ar.rajeshpatil963911 ай бұрын
😊🙏
@NBCNothingButCrap11 ай бұрын
its transparent, but when rendered, still can see those image bounding, look like a transparent grey glass.
@ar.rajeshpatil963911 ай бұрын
One possibility it to use Physical Render option while rendering. It may take a bit long time to render but solve the problem.
@user-lh9sw7vq6g Жыл бұрын
Благодарю!!!
@ar.rajeshpatil9639 Жыл бұрын
пожалуйста (you are welcome)
@blueaar1335 Жыл бұрын
Template plz can share with if u have one. Secondly hoe to use estimation or bill quantity in archicad
@ar.rajeshpatil9639 Жыл бұрын
What type of Template you looking for? Please specify clarify so I can help you. For understanding how to do Estimation by using Classification & Properties you can try these lessons kzread.info/dash/bejne/dX6WupuJdZvgk5M.html
@shahnawaz_83 Жыл бұрын
One day ur channel will grow ..
@ar.rajeshpatil9639 Жыл бұрын
Thank you for encouraging me 🙏
@shahnawaz_83 Жыл бұрын
Very nice sir
@shahnawaz_83 Жыл бұрын
Sir very good content
@shahnawaz_83 Жыл бұрын
Nice sir, if u can plz make in hindi language also
@shahnawaz_83 Жыл бұрын
Respect sir
@lucasprille4201 Жыл бұрын
Hi! In the option save layout into: Model space is grey so I can´t select it. why?
@ar.rajeshpatil9639 Жыл бұрын
Hi, Do check it the selected translator you are using for "Export" purpose and not for Import or Both. This option is available just before the Translator name in the listed translators. Hope this will solve your problem.
@christianagiang2452 Жыл бұрын
This was so helpful! Thank you so much!
@ar.rajeshpatil9639 Жыл бұрын
You are welcome 😊
@febrahim1304 Жыл бұрын
Amazing Tutorial. Thank you.
@ar.rajeshpatil9639 Жыл бұрын
You are most welcome.
@gretheshus2 жыл бұрын
Nice video Rajesh, well done! :)
@ar.rajeshpatil96392 жыл бұрын
Glad you liked it! do help by suggesting any needful corrections to improve further.
@gretheshus2 жыл бұрын
I am quite pleased by your clear pedagogic approach and understandable english. Do you have any suggestions on how to do a "follow me" operation, as the "Follow me" in Sketchup. To make pipes and so on. Have a nice day :)
@ar.rajeshpatil96392 жыл бұрын
Are you looking for "Follow Me" by using Param-O?
@gretheshus12 жыл бұрын
Yes, a function where you can make a profile and then a line (both straight and arched) so that the profile becomes a long 3D object. But that is not possible in Param-O as I understand it.
@daydreaming28902 жыл бұрын
Sir voice qauality is not good
@ar.rajeshpatil96392 жыл бұрын
Sorry for the inconvenience, please try to use headphones if possible. I will consider your note for the next recordings.
@LearningArchicad2 жыл бұрын
Shared
@atuleducation2 жыл бұрын
Please link next video here.
@ar.rajeshpatil96393 жыл бұрын
Kindly use Head Phone for better audible experience.
@ar.rajeshpatil96393 жыл бұрын
Kindly use Head Phone for better audible experience.
@ar.rajeshpatil96393 жыл бұрын
Kindly use Head Phone for better audible experience.
@ar.rajeshpatil96393 жыл бұрын
Kindly use Head Phone for better audible experience.
@ar.rajeshpatil96393 жыл бұрын
Kindly use Head Phone for better audible experience.
@ar.rajeshpatil96393 жыл бұрын
Kindly use Head Phone for better audible experience.
@ar.rajeshpatil96393 жыл бұрын
Kindly use Head Phone for better audible experience.
@ar.rajeshpatil96393 жыл бұрын
Kindly use Head Phone for better audible experience.
Пікірлер
Hi, how do I scale if my scales in archicad are different?
@@brightkanda9831 you mean if the ArchiCAD layout data with different printing scales is imported in CAD software then or something else?
Sir, what is the method for multiple copy? "Arrow++" - How to do this?
Use basic command like drag Ctrl+D and then press Ctrl key once to change drag mode into drag a copy mode. For multiple copy instead of Ctrl press Ctrl+Alt key together you will get ++ mode. All this if you using windows based AC. All such hotkeys are listed next to the command name in pulldown menu or mouse right click context menu.
Can't hear you! SPEAK UP
Sorry for the inconveniences. Kindly use headphones as my earlier recordings were having some issues in sound quality. Same has been mentioned below the video discription. Kindly co-operate. Thanks
Thank you for this!
You are welcome 😊
Looks good, but I cannot replicate the effect. My line gets spotted with uneven light.
Rajesh, thank you so much! Saved me!!!
You are most welcome 🙏😊
hello there. So good, thanks, Have a question : How can I make a horizontal light effect ? I've tried to turn the vertical line, but I'm not getting it
Just select the inserted liner light in 3D window and use the magenta node hotspots to get the desired effects.
@@ar.rajeshpatil9639 I understood, but unfortunately (I don't know why reason) it only allows me to rotate in x, y axis, but not in z axis, to put it horizontally. What is the secret to get it?
автор ты лучший!!!
Большое спасибо!
amazing...how can I take surveyors data from global map into ArchiCad ... thank u so much this tutorial
Thanks for the compliment, means a lot 😊
Greetings from Kigali, Rwanda. This is good reminder on some basics we forget. A question. How can the quantities for the arches or lintels be captured under the schedules generated by Archicad. If so, can we get various details like length, volume, surface area etc. Thank you
Hello, sorry for delay in reply. You can extract the needful information in Schedules > elements by adding required fields from Library part parameters But calculating volume or surface area of such parts is not possible directly inside ArchiCAD. Can be done in Excel. Hope this will solve your problem.
Greetings from Kigali, Rwanda. Nice technique I have learnt today. Aug 2023 keep up the good work.
Hi, thanks for appreciation. It means a lot for me 🙏 😊
'PromoSM' 🤤
😊🙏
its transparent, but when rendered, still can see those image bounding, look like a transparent grey glass.
One possibility it to use Physical Render option while rendering. It may take a bit long time to render but solve the problem.
Благодарю!!!
пожалуйста (you are welcome)
Template plz can share with if u have one. Secondly hoe to use estimation or bill quantity in archicad
What type of Template you looking for? Please specify clarify so I can help you. For understanding how to do Estimation by using Classification & Properties you can try these lessons kzread.info/dash/bejne/dX6WupuJdZvgk5M.html
One day ur channel will grow ..
Thank you for encouraging me 🙏
Very nice sir
Sir very good content
Nice sir, if u can plz make in hindi language also
Respect sir
Hi! In the option save layout into: Model space is grey so I can´t select it. why?
Hi, Do check it the selected translator you are using for "Export" purpose and not for Import or Both. This option is available just before the Translator name in the listed translators. Hope this will solve your problem.
This was so helpful! Thank you so much!
You are welcome 😊
Amazing Tutorial. Thank you.
You are most welcome.
Nice video Rajesh, well done! :)
Glad you liked it! do help by suggesting any needful corrections to improve further.
I am quite pleased by your clear pedagogic approach and understandable english. Do you have any suggestions on how to do a "follow me" operation, as the "Follow me" in Sketchup. To make pipes and so on. Have a nice day :)
Are you looking for "Follow Me" by using Param-O?
Yes, a function where you can make a profile and then a line (both straight and arched) so that the profile becomes a long 3D object. But that is not possible in Param-O as I understand it.
Sir voice qauality is not good
Sorry for the inconvenience, please try to use headphones if possible. I will consider your note for the next recordings.
Shared
Please link next video here.
Kindly use Head Phone for better audible experience.
Kindly use Head Phone for better audible experience.
Kindly use Head Phone for better audible experience.
Kindly use Head Phone for better audible experience.
Kindly use Head Phone for better audible experience.
Kindly use Head Phone for better audible experience.
Kindly use Head Phone for better audible experience.
Kindly use Head Phone for better audible experience.