Tcodyw88

Tcodyw88

Information, how-to’s and reviews of whatever I’m interested in at the moment.

Moving quad loading practice

Moving quad loading practice

Quad loading  a pump shotgun

Quad loading a pump shotgun

Пікірлер

  • @veeno3004
    @veeno30043 күн бұрын

    Where is this place?

  • @GLOCK_SLINGER_34
    @GLOCK_SLINGER_343 күн бұрын

    Fast AF

  • @Itsgregguys
    @ItsgregguysАй бұрын

    What electric fans are they? Do you have a write up anywhere of the nature by chance?

  • @Tcodyw88
    @Tcodyw8829 күн бұрын

    @@Itsgregguys just some cheap fans since the truck doesn’t actually use them for regulating the vehicle’s temperature. I didn’t do a write up for this one unfortunately.

  • @Itsgregguys
    @Itsgregguys28 күн бұрын

    @@Tcodyw88 do you have model numbers of the fans by chance? I’m sure I can potentially figure out the wiring on my own

  • @Tcodyw88
    @Tcodyw8827 күн бұрын

    @@Itsgregguys I bought them Amazon but they are no longer available. But you could just find any cheap 2 pack of 10” fans. Theres also a ton of videos on how to wire e-fans to the relay and the relay to be triggered by a stand alone switch or to come on when other accessories are turned on. Some people run the fan relays to the a/c condenser so they automatically turn on with the a/c to make it colder.

  • @SleepingWithShotguns
    @SleepingWithShotgunsАй бұрын

    Nice Where tf everyone getting these fckin sidecars at btw. Most i got is a shell holder on the stock, best speed i got is 8 seconds for 5 rounds from a dead chamber

  • @oddsquadOlive
    @oddsquadOliveАй бұрын

    thats good Video game reload speed

  • @GameReplays-
    @GameReplays-Ай бұрын

    Is that a keyblade on the wall?

  • @Tcodyw88
    @Tcodyw88Ай бұрын

    lol no.

  • @Deusvult633
    @Deusvult633Ай бұрын

    Nice one

  • @deandremireles8921
    @deandremireles8921Ай бұрын

    Very clean 🎉❤

  • @leopoldbienkowski-gibbs917
    @leopoldbienkowski-gibbs917Ай бұрын

    Did you have to modify it to make this possible?

  • @Tcodyw88
    @Tcodyw88Ай бұрын

    Yes

  • @sullivan9191
    @sullivan91912 ай бұрын

    But why

  • @Tcodyw88
    @Tcodyw882 ай бұрын

    Because tires over 35” combined with rock crawling use will blow out the stock steering rack very quickly. In addition to having larger components the tundra steering rack is easier to rebuild at $30 for a rebuild kit.

  • @staceycousins3581
    @staceycousins35812 ай бұрын

    I understand how to wire the relay to the switch, but how do you wire the orinal wires from the rock lights to the relay? I have 3 wires from my rock lights, a back, a red, and a blue.

  • @Tcodyw88
    @Tcodyw882 ай бұрын

    I have no idea what rock lights you are using, but for a standard 2 wire rock light the power(+) wire goes directly to the battery and the negative(-) wire goes to terminal 30 on the relay.

  • @staceycousins3581
    @staceycousins35812 ай бұрын

    @@Tcodyw88 where would the 3rd wire go that makes the switch light up?

  • @Tcodyw88
    @Tcodyw882 ай бұрын

    @@staceycousins3581 you can send me pictures of exactly what your talking about on Instagram @tvodyw88. I’m not sure if you’re referring to a 3rd wire on the switch or the leds.

  • @shawncousins8715
    @shawncousins87152 ай бұрын

    So will the rock lights work normally or only as courtesy lights?

  • @Tcodyw88
    @Tcodyw882 ай бұрын

    Yes when you press the button they will stay on.

  • @docstrife3749
    @docstrife37492 ай бұрын

    Thats cool as fuck

  • @woodswolfairsoft347
    @woodswolfairsoft3472 ай бұрын

    Do you do that work yourself on the loading port?

  • @Tcodyw88
    @Tcodyw882 ай бұрын

    Yes Sir.

  • @woodswolfairsoft347
    @woodswolfairsoft3472 ай бұрын

    @@Tcodyw88 believe it or not but I just finished doing it to my shotgun 30 mins ago and holy moly it really helps with loading and is much more comfortable.

  • @liggerstuxin1
    @liggerstuxin12 ай бұрын

    What size wrench? Because my 19 mm is too small. Yet ChatGPT is telling me 17 mm is supposed to work. I have two armor wrenches that don’t work on it because they’re too small. One of them is Magpul wrench that was 80 bucks or so.

  • @Rejectingmodernity01
    @Rejectingmodernity012 ай бұрын

    hey T dog can you give us a detailed build sheet on the truck?wheels and specs tires suspension lift? gearing ect

  • @Tcodyw88
    @Tcodyw882 ай бұрын

    Yeah I’ll be doing a complete video soon, I just wanted to get the tundra rack and heim steering installed first.

  • @FerociousSniper
    @FerociousSniper2 ай бұрын

    You reloaded that faster than some soldiers can reload an M4.

  • @robertoayala4095
    @robertoayala4095Ай бұрын

    I call B.S!! Great reload!! But definitely not faster than reloading an AR! Soldier or not!!

  • @FerociousSniper
    @FerociousSniperАй бұрын

    @@robertoayala4095 I saw plenty of POGs fumble with their mags when trying to reload their M4s. But hey, it's a new army, hooah.

  • @spaGEHdee
    @spaGEHdee2 ай бұрын

    Ok I followed ur diagram but I connected straight to da battery instead of da dome (blue wire). So I used a switch illumination harness from tacomabeast. So green wire goes to pin86 n da red wire u connected to dome but I tapped into da rock light positive (wire to battery with inline fuse). Everything worked as supposed to but when I use da switch in da cab to turn on da rock lights it also turns on da dome lights. So I untapped from da rock lights positive wire (da inline fuse to battery) and used an add-a-fuse but same result, dome light turns on with switch. Any clue wat I did wrong or missed?

  • @Tcodyw88
    @Tcodyw882 ай бұрын

    If you’re talking about the ch4x4 switch’s the green wire goes directly to 12v constant power and the red wire goes to 86 and when you push the switch it send power to open the relay. 87a and 30 are connected when 85 and 86 don’t have both a power and ground on each, once 85 and 86 have power and a ground then 87 and 30 become connected. The ground wire from the dome light should only be used to trigger the relay to open (86). The dome light should not be directly wired into the rock lights, that is the purpose of the relay to keep everything working together but not directly wired together.

  • @spaGEHdee
    @spaGEHdee2 ай бұрын

    @@Tcodyw88 ok I double check n I was mistaken I did green wire to an add a fuse n red wire to 86. On ur relay/diagram 85 is positive n 86 is ground?

  • @Tcodyw88
    @Tcodyw882 ай бұрын

    @@spaGEHdee no in the diagram 85 is ground and 86 is the positive wire that comes from the switch when it’s pressed on.

  • @spaGEHdee
    @spaGEHdee2 ай бұрын

    @@Tcodyw88 I got rock lights + to battery, rock lights - to 30pin, got 87&85pin to chassis(ground), got dome light - (yellow wire) to 87a, in cab switch green wire to an add a fuse engine bay fuse box, red wire from in cab switch to pin86. idk why my dome light comes on when I turn on da switch.

  • @Tcodyw88
    @Tcodyw882 ай бұрын

    @@spaGEHdee based on what your saying is happening try switching the two wires on 87 and 87A

  • @zackeryharman425
    @zackeryharman4252 ай бұрын

    Nice job.

  • @thomasgjonovich5524
    @thomasgjonovich55243 ай бұрын

    A company called “at the helm” makes a bracket to support the bed using the factory hole. I just found this out myself as I am about to trim my rear fenders.

  • @Tcodyw88
    @Tcodyw882 ай бұрын

    Yeah there’s a few company’s out there making them. I specifically wanted mine further back so it wasn’t really visible, and the emt was free for me lol. Good luck with the fender trim bro

  • @williamgoodlett4938
    @williamgoodlett49383 ай бұрын

    I think I finally understand what you did. So your diagram picture and your explanation I understood differently. You connected your hot wire from your switch to the 12v + blue, The negative wire on the switch to 86 on the relay. Then connected 87 and 85 to a ground. 30 on the relay to the negative on the rock lights/footwell lights. Then Where did you connect your rocker lights/footwell lights positive wire? I connected my switch to a 6 panel fuse box and my rocker light positive wire to the 12v blue wire. The lights come on with the switch but not the door.

  • @Tcodyw88
    @Tcodyw883 ай бұрын

    Did you connect the dome light ground wire to 87a like in the diagram?

  • @williamgoodlett4938
    @williamgoodlett49383 ай бұрын

    I want to say I connected everything like you said and I get nothing when the door is open but when I click the switch the lights come on and off. The power comes from the 12v. Do I need a capacitor?

  • @Nickdangercreations
    @Nickdangercreations3 ай бұрын

    Clean build 🔥, who makes your rear bumper?

  • @Tcodyw88
    @Tcodyw883 ай бұрын

    Outgear Solutions makes the rear bumper. I added the flip down license plate over the tow hitch and tabs for the back up sensors myself tho.

  • @williamgoodlett4938
    @williamgoodlett49383 ай бұрын

    Does this work with a sr5 3rd gen? I have a H key. I may be able to wire it the same way but leave out the wiring that will come on when I get close process.

  • @williamgoodlett4938
    @williamgoodlett49383 ай бұрын

    I also want to us running board lights. I was thinking that I would have to use a relay. Do I need a 4 pin or 5 pin relay. I don't want to use a switch. Just hardwire turn signal, and when door opens.

  • @Balaclavaballistics
    @Balaclavaballistics3 ай бұрын

    What rig is that

  • @Veatbrap
    @Veatbrap3 ай бұрын

    Sick rig man! Who makes that bumper?

  • @Tcodyw88
    @Tcodyw883 ай бұрын

    Thanks bro! I built it myself

  • @e30surftaco
    @e30surftaco4 ай бұрын

    surprised with no warning for low oil pressure. Anytime I take my truck up a steep incline I get that warning. nice truck Mr cody

  • @stevegarcia3229
    @stevegarcia32294 ай бұрын

    Now that’s a clean build man….. nothing over the top just the right amount of sauce 😮‍💨🤙🏼

  • @Tcodyw88
    @Tcodyw884 ай бұрын

    Thanks bro 🤘🏻🤘🏻🤘🏻

  • @axeliraheta903
    @axeliraheta9034 ай бұрын

    Dannmm looks so beauty 👏👏

  • @cibdizzy
    @cibdizzy4 ай бұрын

    Toyota commercial very nice

  • @WW-sj7zk
    @WW-sj7zk4 ай бұрын

    Kinda irresponsible to leave it parked there. Just saying. Be safe not sorry.

  • @Tcodyw88
    @Tcodyw884 ай бұрын

    😂🤣 That would be the least irresponsible thing I did that day. Thanks Karen.

  • @Houndzee
    @Houndzee4 ай бұрын

    Lot of faith in that parking brake…

  • @Tcodyw88
    @Tcodyw884 ай бұрын

    Anyone with a Tacoma knows how horrible the parking brakes are 😂

  • @Bananahammock88
    @Bananahammock884 ай бұрын

    Is that silverwood lake?

  • @Tcodyw88
    @Tcodyw884 ай бұрын

    Bouquet reservoir at rowher flats

  • @MrRICK244808
    @MrRICK2448084 ай бұрын

    Nice were is this at

  • @Tcodyw88
    @Tcodyw884 ай бұрын

    Rowher flats

  • @Tehilliym
    @Tehilliym4 ай бұрын

    Looks sick bro ❤

  • @wayde2
    @wayde24 ай бұрын

    she looking mean bro💯🔥😮‍💨

  • @jamesbennett3849
    @jamesbennett38494 ай бұрын

    Looks like a F150 oof

  • @Tcodyw88
    @Tcodyw884 ай бұрын

    It doesn’t have raptor lights 😂

  • @Gushing69Granny
    @Gushing69Granny4 ай бұрын

    What sucks about my Mossberg is the the opening where you put the shells in, is extremely sharp. Like cut my thumbs up nearly every time I load more shells into it. I want to file it but don’t want metal shavings going right inside the bolt

  • @Tcodyw88
    @Tcodyw884 ай бұрын

    It would need to be disassembled before any of that type of work.

  • @caesar5555
    @caesar55555 ай бұрын

    No locktight?

  • @PitPwny
    @PitPwny27 күн бұрын

    Unless you use red lock tight you’re probably going to cook it with the heat of the barrel after shooting. Most breaks come with a crush washer.

  • @edfig
    @edfig5 ай бұрын

    This is so cool. I want to do this.

  • @user-cf8mp8jt3o
    @user-cf8mp8jt3o6 ай бұрын

    ACTUALLY QUITE IMPRESSIVE DUDE! YOU ARE AS FAST AS THAT GUY AND HIS DAUGHTER BRO!

  • @MoneyTr41l
    @MoneyTr41l6 ай бұрын

    well that was fricken sweet... and not disappointed after clicking this lol

  • @MoneyTr41l
    @MoneyTr41l6 ай бұрын

    Awesome sht! Now ima go through your videos looking for how you made that belt lol

  • @opticalmouse2
    @opticalmouse26 ай бұрын

    Murikan gun nut. Gives me serial killer vibes.

  • @danielguevara2914
    @danielguevara29146 ай бұрын

    Banished them to the shadow realm

  • @KryzysX
    @KryzysX6 ай бұрын

    insane

  • @Tyrant_Popper
    @Tyrant_Popper7 ай бұрын

    Quad x 2 = OCTO load

  • @phale426
    @phale4267 ай бұрын

    How did you mount the match saver? Seems like it's mounted directly to the barrel?

  • @XX-fq8kp
    @XX-fq8kp7 ай бұрын

    And the caddy you r using? 👍

  • @maximuslt90
    @maximuslt907 ай бұрын

    😮👏👏👏👏