I''ll have to do this upgrade too since the standard extruder is too trivial and then leaves a lot to be desired (the filament doesn''t come out smoothly but in threads and we''re not there). But I was thinking of buying the Kobra2 extruder to mount on my Kobra series one (but I will have to replace the heating capsule and temperature sensor with the ones I have mounted on my printer), because I find it interesting to improve the passage of melted filament with a longer nozzle. Will I solve and get results?
@erickruse467918 күн бұрын
I wonder if this works for Kobra 2 Max. Also, wondering if these issue I keep hearing about on Kobras are only about printing above a certain temp? I'm probably just doing PLA, and my settings have been around 205 on my Ender 3. The my Kobra 2 Max comes in today, and I want to go ahead and do some of the upgrades if they are relevant to PLA only.
@judyblaise163920 күн бұрын
You could always lay a piece of parchment paper over the top of the candy. You could cut the jolly ranchers into half or thirds.
@maddogmarksassАй бұрын
what about the fan thats hanging in the video. does that fit in the old position?
@AlbertaleaАй бұрын
I wanted to see how they came out, please
@bobreichelАй бұрын
I found a heatbreak exact fit. Changed it, all worked great till I did a bed level. The nozzle got grounded into the bed. Any idea what went wrong? I see the bed leveling light coming on but the nozzle just kept going. Frustrated.
@bobreichel2 ай бұрын
Will it work for the kobra 2 pro?
@crystallsmith53652 ай бұрын
Can you add the recipe for the Carmel sauce please 🙏🏽
@stephaniecoakley902 ай бұрын
That’s kinda gross
@frankfontein10333 ай бұрын
Great video. Can you hold your phone the correct way for your next video please. (the world is mainly horizontal ;-)
@steve-1753 ай бұрын
You didn't get any caramel on the ends of those on the bottom right of the screen or your top right😮😮😮😢😢😢😢😢😢
@yasinbantva29533 ай бұрын
Look like yummy Love you Dost mean friend
@Enjoymentboy4 ай бұрын
If you have a kobra 2 you can replace the heatbreak with a bi-metal one from a CR6 and this will allow you to use standard volcano nozzles. You will need to adjust the height of the inductive probe, run a PID autotune and set your z offset but it is a perfect fit.
@martinsmith29482 ай бұрын
this is gold, thank you
@Enjoymentboy2 ай бұрын
@@martinsmith2948 Welcome. Just for a heads-up I have also heard that the bi-metal heatbreak for a vyper is a better option. I haven't had so much as a single problem with the CR6 SE one I have and there is literally a dozen kg through it.
@ErdrickHero5 ай бұрын
Be ashamed
@abhishek50255 ай бұрын
Bro traumatized the cat
@hello-ef4bn5 ай бұрын
this is horrendous. i love it.
@MasonsTurtle5 ай бұрын
I love it and hate it 😂
@GCKteamKrispy5 ай бұрын
Now that’s what 3D printers were made for
@chunkyfecalbreakfast5 ай бұрын
Disgustingly brilliant
@benjamengabriellewis88186 ай бұрын
For now all I did was swap out factory tubing with the blue stuff. It's printing petg pretty good now.
@boosD1007 ай бұрын
Hey there, thanks for the video. I also have the sv04, and I have tried almost everything. If you have time, could you please help me with getting mine up to par 🙏 it would be a great help. Please reach out to me Thanks
@102diy9 ай бұрын
Good job, I have installed bi-metall on my anycubic i3 and now it is perfect!
@jackapotsos61309 ай бұрын
Would it make much of a difference if I were to just upgrade to the Capricorn?
@charlesdix483110 ай бұрын
I have an Anycubic Kobra Go. It worked well for 9 months and now.. well, it's a hot mess... Quick question.. did you re-use your heat sink and did it work okay or did you upgrade the heat sink as well?
@markhanslip834610 ай бұрын
I have a Kobra (base model) 3d printer and am having trouble. My original print head stopped feeding filament after a certain amount of use. I replaced the hot-end and the problem still exists. I have tried different filaments with no difference. Until recently, I was able to make things just fine. This article made me realize that the Kobra (base model) has its filament drive as part of the print head. Where other Kobra models have a separate filament drive. Is there an advantage in later Kobra models?
@mohammadwong10 ай бұрын
How would i be able to change firmware and display ui to go over 260 degree though
@user-tt6je4ll8n7 ай бұрын
you need to Change this in your Firmware depends how got u want to go i change mine to 315 C so i can heat up to 300 C (15 C Protection is applied in every firmware)
@user-bd3dw8pr6c10 ай бұрын
Can you use a v6 heat block instead of the one you show in the video?
@tacoterito2211 ай бұрын
Hello mate, thanks for the guide!! one question I have the Kobra neo, i guess its the same hotend, but i see that you purchase the V5 bimetal heatbreak instead of the v6 why is that?
@gary5721011 ай бұрын
I"m going to do this to my Kobra. I noticed that the capricorn tubing is fairly loose in the heatbreack. Is this a problem?
@lifetech10111 ай бұрын
Not an issue at all. Be sure to cut it to the correct length.
@AlexPlaysVideoGamez11 ай бұрын
Would this work for a kobra max?
@maxmuthig4016 Жыл бұрын
Hey! Would that also work the Kobra 2 and/or do you have pointers how to? :)
@SmokinJim-3D Жыл бұрын
Very cool. Dial in those settings a little bit more and you'll be in the money. You got a great deal on the printer too!
@Wiljuchi Жыл бұрын
Nice parrot/parakeet 🙂
@trento8397 Жыл бұрын
What socks are you talking about?
@RumpusTime89 Жыл бұрын
Looks great. How much did the acrylic run you?
@mg_customs8531 Жыл бұрын
This benchy looks awesome!! Did you do any firmware updates for max temp? I've been wanting to do this upgrade! The max temp on the kobra states 260c degree printing, but ptfe starts degrading at that temp? I've been printing PC at 250c and am worried about the ptfe wearing out and off gassing.
@ZeeshanAhmad-pt2ch Жыл бұрын
Aliexpress link?
@leonardojoy Жыл бұрын
you have the measurements of the acrilics panels?
@sinoflust9917 Жыл бұрын
can you link the adapter you uae to connect printer and powe at the same time please
@cryoglobe5 ай бұрын
yes .. I'm also trying to find a good one
@katietate3084 Жыл бұрын
😝 Promo>SM
@Thump2030 Жыл бұрын
by the time you do all the upgrades isn't it the same price as buying the x1 carbon?
@lifetech101 Жыл бұрын
900 for me and it's the color I want. There is a certain amount of happiness in doing it yourself.
@Engineering_Science Жыл бұрын
That engraving turned out nice. I also got a Ender 3v2, bought it 2 years ago, still new in the box never opened it... want to make PCBs using photoresit with the UV laser. I also bought with the updated motherboard which have better stepper controller for higher motion control which should provide better laser engraving resolution.
@rickyneeter69 Жыл бұрын
Petg does not need an enclosure? Lol
@georgeovel6423 Жыл бұрын
HEADS UP FOLKS! This does not work now; if it ever did. Amazon parts speced are wrong sized. That might mean Anycubic changed decently, but lack of showing work done points to a shoddy how-to clickbait post.
@lifetech101 Жыл бұрын
Lol. Works fine. Many of us ha e done it.
@georgeovel6423 Жыл бұрын
@@lifetech101I'm s re you did. What, all 51 of yo r subscribers did this won erful magical h ck? A hack that the engine rs at Anycubic laughed at? That one?
@user-tt6je4ll8n7 ай бұрын
its still works on ANYCUBIC KOBRA (STANDARD)
@MichaelRoberts-ky2oz Жыл бұрын
Not every hero wears a cape! Working on installing mine. Half done as I ordered a set that didn’t come with the thermistor wires but those will arrive tomorrow!
@ItsDaPlumber Жыл бұрын
Sealed up tight! Did you install a motherboard fan?
@Leviathan3DPrinting Жыл бұрын
Ooooh yeah I used sendcutsend on my printer. They’re awesome. Highly recommend.
@adriankoniarz5759 Жыл бұрын
How much does the enclosure cut down on the sound of the P1P?
@lifetech101 Жыл бұрын
Quite a bit actually. Unless I am printing PLA. When you print pla, the door has to be left open because heat build-up will cause clogging issues with pla.
@Leonairo500 Жыл бұрын
How about the rear printed panels.. I suffer from warping, can't get it fixed on the P1P..
@weltsiebenhundert Жыл бұрын
Why do I need this Tube even? On the upgrade. How to upgrade to later have NO TUBE at all
Пікірлер
I''ll have to do this upgrade too since the standard extruder is too trivial and then leaves a lot to be desired (the filament doesn''t come out smoothly but in threads and we''re not there). But I was thinking of buying the Kobra2 extruder to mount on my Kobra series one (but I will have to replace the heating capsule and temperature sensor with the ones I have mounted on my printer), because I find it interesting to improve the passage of melted filament with a longer nozzle. Will I solve and get results?
I wonder if this works for Kobra 2 Max. Also, wondering if these issue I keep hearing about on Kobras are only about printing above a certain temp? I'm probably just doing PLA, and my settings have been around 205 on my Ender 3. The my Kobra 2 Max comes in today, and I want to go ahead and do some of the upgrades if they are relevant to PLA only.
You could always lay a piece of parchment paper over the top of the candy. You could cut the jolly ranchers into half or thirds.
what about the fan thats hanging in the video. does that fit in the old position?
I wanted to see how they came out, please
I found a heatbreak exact fit. Changed it, all worked great till I did a bed level. The nozzle got grounded into the bed. Any idea what went wrong? I see the bed leveling light coming on but the nozzle just kept going. Frustrated.
Will it work for the kobra 2 pro?
Can you add the recipe for the Carmel sauce please 🙏🏽
That’s kinda gross
Great video. Can you hold your phone the correct way for your next video please. (the world is mainly horizontal ;-)
You didn't get any caramel on the ends of those on the bottom right of the screen or your top right😮😮😮😢😢😢😢😢😢
Look like yummy Love you Dost mean friend
If you have a kobra 2 you can replace the heatbreak with a bi-metal one from a CR6 and this will allow you to use standard volcano nozzles. You will need to adjust the height of the inductive probe, run a PID autotune and set your z offset but it is a perfect fit.
this is gold, thank you
@@martinsmith2948 Welcome. Just for a heads-up I have also heard that the bi-metal heatbreak for a vyper is a better option. I haven't had so much as a single problem with the CR6 SE one I have and there is literally a dozen kg through it.
Be ashamed
Bro traumatized the cat
this is horrendous. i love it.
I love it and hate it 😂
Now that’s what 3D printers were made for
Disgustingly brilliant
For now all I did was swap out factory tubing with the blue stuff. It's printing petg pretty good now.
Hey there, thanks for the video. I also have the sv04, and I have tried almost everything. If you have time, could you please help me with getting mine up to par 🙏 it would be a great help. Please reach out to me Thanks
Good job, I have installed bi-metall on my anycubic i3 and now it is perfect!
Would it make much of a difference if I were to just upgrade to the Capricorn?
I have an Anycubic Kobra Go. It worked well for 9 months and now.. well, it's a hot mess... Quick question.. did you re-use your heat sink and did it work okay or did you upgrade the heat sink as well?
I have a Kobra (base model) 3d printer and am having trouble. My original print head stopped feeding filament after a certain amount of use. I replaced the hot-end and the problem still exists. I have tried different filaments with no difference. Until recently, I was able to make things just fine. This article made me realize that the Kobra (base model) has its filament drive as part of the print head. Where other Kobra models have a separate filament drive. Is there an advantage in later Kobra models?
How would i be able to change firmware and display ui to go over 260 degree though
you need to Change this in your Firmware depends how got u want to go i change mine to 315 C so i can heat up to 300 C (15 C Protection is applied in every firmware)
Can you use a v6 heat block instead of the one you show in the video?
Hello mate, thanks for the guide!! one question I have the Kobra neo, i guess its the same hotend, but i see that you purchase the V5 bimetal heatbreak instead of the v6 why is that?
I"m going to do this to my Kobra. I noticed that the capricorn tubing is fairly loose in the heatbreack. Is this a problem?
Not an issue at all. Be sure to cut it to the correct length.
Would this work for a kobra max?
Hey! Would that also work the Kobra 2 and/or do you have pointers how to? :)
Very cool. Dial in those settings a little bit more and you'll be in the money. You got a great deal on the printer too!
Nice parrot/parakeet 🙂
What socks are you talking about?
Looks great. How much did the acrylic run you?
This benchy looks awesome!! Did you do any firmware updates for max temp? I've been wanting to do this upgrade! The max temp on the kobra states 260c degree printing, but ptfe starts degrading at that temp? I've been printing PC at 250c and am worried about the ptfe wearing out and off gassing.
Aliexpress link?
you have the measurements of the acrilics panels?
can you link the adapter you uae to connect printer and powe at the same time please
yes .. I'm also trying to find a good one
😝 Promo>SM
by the time you do all the upgrades isn't it the same price as buying the x1 carbon?
900 for me and it's the color I want. There is a certain amount of happiness in doing it yourself.
That engraving turned out nice. I also got a Ender 3v2, bought it 2 years ago, still new in the box never opened it... want to make PCBs using photoresit with the UV laser. I also bought with the updated motherboard which have better stepper controller for higher motion control which should provide better laser engraving resolution.
Petg does not need an enclosure? Lol
HEADS UP FOLKS! This does not work now; if it ever did. Amazon parts speced are wrong sized. That might mean Anycubic changed decently, but lack of showing work done points to a shoddy how-to clickbait post.
Lol. Works fine. Many of us ha e done it.
@@lifetech101I'm s re you did. What, all 51 of yo r subscribers did this won erful magical h ck? A hack that the engine rs at Anycubic laughed at? That one?
its still works on ANYCUBIC KOBRA (STANDARD)
Not every hero wears a cape! Working on installing mine. Half done as I ordered a set that didn’t come with the thermistor wires but those will arrive tomorrow!
Sealed up tight! Did you install a motherboard fan?
Ooooh yeah I used sendcutsend on my printer. They’re awesome. Highly recommend.
How much does the enclosure cut down on the sound of the P1P?
Quite a bit actually. Unless I am printing PLA. When you print pla, the door has to be left open because heat build-up will cause clogging issues with pla.
How about the rear printed panels.. I suffer from warping, can't get it fixed on the P1P..
Why do I need this Tube even? On the upgrade. How to upgrade to later have NO TUBE at all
It helps guide the filament into the heartbreak