Thank you! Such a great video explaining the issue. This was my exact problem. Unfortunately wasn’t able to get my capacitors out and needed the fridge so ordered a new board and replaced it no problem. Super easy fix, was bummed I couldn’t get the capacitor out for a cheaper repair but happy to have my fridge working again and will probably try to have a family member see if they can get the capacitors out of the old one to fix and keep as a spare.
@kngpin488 күн бұрын
Please tell me how to fix this. GE MONOGRAM 2008 zisp480tdass kzread.infouTDwJp5wg58
@kngpin488 күн бұрын
unplugging it does not work
@paquitotruck978 күн бұрын
I HAVE THE SAME WASHER, MY WASHER DONT PASS FROM RINSE TO SPIN, THEY JUST STAY ON RINSE AND REPEAT INFINITY OF TIMES ... CAN YOU HELP ME PLEASE ?
@tmc2005274 күн бұрын
Sorry I don't know the answer to your problem. I'm not an appliance tech I just tried to repair my wash. It gave me a couple more years but eventually it went to appliance heaven and I had to get a new one.
@bubblespawn8 күн бұрын
I remember this, wow it brings back great memories.
@bobfixes76409 күн бұрын
Please correct the battery information. This is a 3.7V Lithium Ion battery (shown at 10:12), not a 1.2V NiCd.
@DaphneHamrick10 күн бұрын
I am having trouble removing the plastic water dispenser front cover (frame) to paint it. I put painters tape around it to protect the enamel and am using a putty knife and screw driver to pop out the attachment pieces. However, it is still holding on in one place. Do you have any videos on how to get it off without breaking it?
@MrFandangoFox14 күн бұрын
Still working in 2024! FYI this same exact issue was seen on GE part number WR55X10942 for me. Fridge Model Number GSH25JSRFSS. I found the controller on Amazon with next-day shipping for $130. I also ordered a soldering kit to try and fix the original. Thanks so much, Tom!
@harinirealtor16 күн бұрын
Mine looked a little different on the inside with the tubing but solved my issue!!! Im grateful i found your video. I saw that tube going into the fridge from behind and couldnt for the life of me figure out where it led to. Your video showed how it in the back(inside the fridge) and i was able to put a new line in and after more than 4/5 maybe 6 years i see water coming through the water line/// not many will get it but being able to fix something is soooo satisfactory! THANK YOU!!!
@uawsux18 күн бұрын
you are lucky gsh 25 the heating element is inside
@secrettrader-og4eb18 күн бұрын
Big time help with that clip man, thanks a lot for this video!
@vikingman26419 күн бұрын
Great video man, I’m really enjoying your Minecraft videos on your other channel👍
@jonathanbsteele19 күн бұрын
Great video. Getting my tools out and diving in!
@anapurnasantra796220 күн бұрын
Thank sir
@rakshithgamer358624 күн бұрын
Didn't work
@Total66FD26 күн бұрын
Brilliant job showing all the steps. Fixed mine by following your guide. Well done and thanks.
@Shaqueenaazkadina-y5m27 күн бұрын
Thanks for All mr. 🎉
@clif9710Ай бұрын
The battery died in mine but when I realized the shaver will run directly off of the wall outlet, I decided to avoid buying either a battery or a new shaver. Win-win for me and the environment.
@Dennis_HeatonАй бұрын
This is the 2nd time mine's went warm, last time I replaced the motherboard for cheap on ebay (over 20 year old fridge). I just ordered another (cheap again, lol), but I think I'll try to repair and keep this one as a spare. Thanks for pointing out your tips!
@SantiagoRodriguez-ot9pgАй бұрын
Yo busco la cabeza de esta afeitadora
@tylerthibodeaux8957Ай бұрын
Cost me $1.60 to fix my fridge. Was about to go out and buy a new one because I thought motor for ice dispenser had gone out too. Fixed clicker issue and dispenser! Thanks a bunch for posting this video!! I really appreciate it
@tmc200527Ай бұрын
Good to hear it is still helping people save money. I still have my fridge. I've seen videos where even the newer fridges today have all types of problems.
@electronicsafricaАй бұрын
Heathkit! That's a name from my youth ...
@philipfmАй бұрын
Excellent. Thank you.
@michaeladair9384Ай бұрын
Excellent Video! Thanks for making a positive detailed explanation of a process!
@timp2210Ай бұрын
I installed a new drive motor a new lid switch and lid switch magnet and my washer still doesn't agitate or spin what am I doing wrong
@timp2210Ай бұрын
Its the same model you're working on
@fuqui035Ай бұрын
I have to clean mine every 2 months
@joeypowling56972 ай бұрын
This is cool this was my childhood tv but it broke so we got rid of it
@schlepers2 ай бұрын
My mtn bike thanks you so much!! Getting a battery at HD now!!!
@alexmercerind2 ай бұрын
Helpful
@ayo_cavane60992 ай бұрын
Yea man you helped me made my first breadboard led light up
@opcodegames2 ай бұрын
May I was what is the second game that you were playing, the one with pterosaurs?
@robertl12442 ай бұрын
WOW... My KitchenAid is 23 years old and it still is working. Just replaced that front coupler you pointed out at the bottom front. 35 $ from the whirlpool parts dealer.. 10 $ from home depot. Guess which one I bought! LOL... And YES... that roll of tubing is to cool the water before you get it to your glass! Is that mold inside the roll of tubing inside the fridge? They say we should clean the tubing with vinegar but ... HOW????? I also was going to use that tubing for replacing other sections. And I will when I need to.... probably soon. Now, why has my water always.... always come out so slow? 47 seconds to fill a 12 oz glass of water.... OMG. I just don't bother... good video!
@anthonynwafor69082 ай бұрын
Good work Tom. I just have a little misunderstanding. How did you get 64 + 32+ 8 +4 and +1 under the next example on converting binary to decimal.
@jasonlewis47703 ай бұрын
One of my earliest memories. I loved this toy when I was very small ❤
@Artificially_ACowboy3 ай бұрын
Didn’t work for me but nice video
@umarshahbazahmadumarshahba36123 ай бұрын
Nice video
@shanongiles98183 ай бұрын
Lecture was amazing! Thank you Tom.
@wstt43 ай бұрын
Loved that game. Thanks for sharing.
@debranatorr21123 ай бұрын
I did this! Worked beautifully!
@user-lk4bq5uk9v3 ай бұрын
So nice
@YogsenForfoth3 ай бұрын
I spent so much time playing this when I was a kid! This game, Carmen Sandiego, and Oregon Trail were so much fun to play back in those days. ❤
@jimmy197420104 ай бұрын
i had one of these when i was a kid, got something trapped in the elevator bit and broke it
@Styner094 ай бұрын
I'm literally dealing with a similar issue. Found a compressor with a blown starter. The board didn't show any obvious (blown or desodderered bits, I did not check those small capacitors, I will try them next! Thank you! It's so amazing to learn something new everyday from KZread
@mintian36654 ай бұрын
Thanks Tom for a nice video. I checked the door switch, pressure switch, and then examed timer controller. They were all in good shape. I took the motor and controller off and examed components. I would almost ditch the washer and watched your video. I then stripped off the wire wrap finally found the blown off thermofuse. The machine works like a new after replacing the thermofuse. Don't understand why GE makes fuse so difficult to find.
@pconroy894 ай бұрын
Hi Tom. Great video. In regards to the power, if going the same route as yourself with the LiIon backpack, will this always draw power until dead as there is no on/off switch added?
@blt9814 ай бұрын
How and where did you get the parts
@tmc2005274 ай бұрын
You can get them from electronics supplies from Digikey, Newark. You can probably even find them on amazon or ebay.
Пікірлер
Same wow😊😊❤
Same ❤❤😊😊😊🎉🎉
Thank you! Such a great video explaining the issue. This was my exact problem. Unfortunately wasn’t able to get my capacitors out and needed the fridge so ordered a new board and replaced it no problem. Super easy fix, was bummed I couldn’t get the capacitor out for a cheaper repair but happy to have my fridge working again and will probably try to have a family member see if they can get the capacitors out of the old one to fix and keep as a spare.
Please tell me how to fix this. GE MONOGRAM 2008 zisp480tdass kzread.infouTDwJp5wg58
unplugging it does not work
I HAVE THE SAME WASHER, MY WASHER DONT PASS FROM RINSE TO SPIN, THEY JUST STAY ON RINSE AND REPEAT INFINITY OF TIMES ... CAN YOU HELP ME PLEASE ?
Sorry I don't know the answer to your problem. I'm not an appliance tech I just tried to repair my wash. It gave me a couple more years but eventually it went to appliance heaven and I had to get a new one.
I remember this, wow it brings back great memories.
Please correct the battery information. This is a 3.7V Lithium Ion battery (shown at 10:12), not a 1.2V NiCd.
I am having trouble removing the plastic water dispenser front cover (frame) to paint it. I put painters tape around it to protect the enamel and am using a putty knife and screw driver to pop out the attachment pieces. However, it is still holding on in one place. Do you have any videos on how to get it off without breaking it?
Still working in 2024! FYI this same exact issue was seen on GE part number WR55X10942 for me. Fridge Model Number GSH25JSRFSS. I found the controller on Amazon with next-day shipping for $130. I also ordered a soldering kit to try and fix the original. Thanks so much, Tom!
Mine looked a little different on the inside with the tubing but solved my issue!!! Im grateful i found your video. I saw that tube going into the fridge from behind and couldnt for the life of me figure out where it led to. Your video showed how it in the back(inside the fridge) and i was able to put a new line in and after more than 4/5 maybe 6 years i see water coming through the water line/// not many will get it but being able to fix something is soooo satisfactory! THANK YOU!!!
you are lucky gsh 25 the heating element is inside
Big time help with that clip man, thanks a lot for this video!
Great video man, I’m really enjoying your Minecraft videos on your other channel👍
Great video. Getting my tools out and diving in!
Thank sir
Didn't work
Brilliant job showing all the steps. Fixed mine by following your guide. Well done and thanks.
Thanks for All mr. 🎉
The battery died in mine but when I realized the shaver will run directly off of the wall outlet, I decided to avoid buying either a battery or a new shaver. Win-win for me and the environment.
This is the 2nd time mine's went warm, last time I replaced the motherboard for cheap on ebay (over 20 year old fridge). I just ordered another (cheap again, lol), but I think I'll try to repair and keep this one as a spare. Thanks for pointing out your tips!
Yo busco la cabeza de esta afeitadora
Cost me $1.60 to fix my fridge. Was about to go out and buy a new one because I thought motor for ice dispenser had gone out too. Fixed clicker issue and dispenser! Thanks a bunch for posting this video!! I really appreciate it
Good to hear it is still helping people save money. I still have my fridge. I've seen videos where even the newer fridges today have all types of problems.
Heathkit! That's a name from my youth ...
Excellent. Thank you.
Excellent Video! Thanks for making a positive detailed explanation of a process!
I installed a new drive motor a new lid switch and lid switch magnet and my washer still doesn't agitate or spin what am I doing wrong
Its the same model you're working on
I have to clean mine every 2 months
This is cool this was my childhood tv but it broke so we got rid of it
My mtn bike thanks you so much!! Getting a battery at HD now!!!
Helpful
Yea man you helped me made my first breadboard led light up
May I was what is the second game that you were playing, the one with pterosaurs?
WOW... My KitchenAid is 23 years old and it still is working. Just replaced that front coupler you pointed out at the bottom front. 35 $ from the whirlpool parts dealer.. 10 $ from home depot. Guess which one I bought! LOL... And YES... that roll of tubing is to cool the water before you get it to your glass! Is that mold inside the roll of tubing inside the fridge? They say we should clean the tubing with vinegar but ... HOW????? I also was going to use that tubing for replacing other sections. And I will when I need to.... probably soon. Now, why has my water always.... always come out so slow? 47 seconds to fill a 12 oz glass of water.... OMG. I just don't bother... good video!
Good work Tom. I just have a little misunderstanding. How did you get 64 + 32+ 8 +4 and +1 under the next example on converting binary to decimal.
One of my earliest memories. I loved this toy when I was very small ❤
Didn’t work for me but nice video
Nice video
Lecture was amazing! Thank you Tom.
Loved that game. Thanks for sharing.
I did this! Worked beautifully!
So nice
I spent so much time playing this when I was a kid! This game, Carmen Sandiego, and Oregon Trail were so much fun to play back in those days. ❤
i had one of these when i was a kid, got something trapped in the elevator bit and broke it
I'm literally dealing with a similar issue. Found a compressor with a blown starter. The board didn't show any obvious (blown or desodderered bits, I did not check those small capacitors, I will try them next! Thank you! It's so amazing to learn something new everyday from KZread
Thanks Tom for a nice video. I checked the door switch, pressure switch, and then examed timer controller. They were all in good shape. I took the motor and controller off and examed components. I would almost ditch the washer and watched your video. I then stripped off the wire wrap finally found the blown off thermofuse. The machine works like a new after replacing the thermofuse. Don't understand why GE makes fuse so difficult to find.
Hi Tom. Great video. In regards to the power, if going the same route as yourself with the LiIon backpack, will this always draw power until dead as there is no on/off switch added?
How and where did you get the parts
You can get them from electronics supplies from Digikey, Newark. You can probably even find them on amazon or ebay.
What’s that tool you used to suck that sodier off
LG Revere 3 is sus 4:28
How do I remove an app from the home menu?