Same issue and will need to do the dame. I appreciate the video.
@wests3771Ай бұрын
Looks good, I want those templates! I bought a 12-volt mini split off of AliExpress for $400 and been using it for a year. I've got 2, 200 amp hour lithium batteries it's awesome. But I love the hidden window shaker.
@tombryant84052 ай бұрын
Dude, I feel like such an idiot! I hot a Apex a few months ago. I had it installed with a bumper. When the install was done they didn't give me the instructions or any info for the winch. So the otherday I needed it and cldnt get it to work wirelessly. I ended up using the wired attachment. Since then I've tried everything to figure this out. Of course the last resort was U Tube. Well in the 1st cple minutes of your video was the answer. Since my winch is installed in the bumper, you really can't see the plug for the wired connection. After watching the 1st cple minutes of your video You said something about turning the remote switch on! OMG, wow, of course it has a switch to turn that on! Thanks for the video and hope everyone else finds your video helpful!
@JuanMartinez-zt5vi2 ай бұрын
I followed your instruction and saved our boat. Awesome
@fishybusiness732 ай бұрын
Hey man just want to say thanks for putting this video up - I just fixed mine the same way after watching this. I used some very fine fishing braid wrapped around the brush wire to keep the brush retracted while fitting. Very fiddly but it worked. Thanks again!!
@djnemesis82pluss18772 ай бұрын
That’s pretty wild lol
@backyardtrailbuilders3 ай бұрын
Pro guy needs a clean shop
@MrSolara73 ай бұрын
Good job, mine just died. Maybe I need a new motor. Thanks
@joshuataylor42563 ай бұрын
Hey thanks! I’ve been avoiding this repair because I hadn’t taken to time to find a fix… for over a year. My grandad used that method on boats, cars, docks etc. and the red loctite was on my mind too. Great video!
@tony077373 ай бұрын
Perfect! I got this fridge used and this seems like the only issue. Now it's fixed. Thank you very much!
@concealit48003 ай бұрын
What did it do when u noticed it how did it pull?
@wtrlvr2414 ай бұрын
That's some good shit right there. I'm thinking about buying a cyclone that has had the door rebuilt and its heavy AF so thinking about rebuilding with some aluminum
@crashburn8215 ай бұрын
Very nice job there, my friend! Want to do another one?😊
@903environment5 ай бұрын
Had an upgrade custom suspension but my steering rack boot is not connected,how I zip tie it to wat
@djnemesis82pluss18775 ай бұрын
Mine are fucked up. If u make the rack Greasable I wouldn’t even worry about it . But there’s a little channel on the rack the boot rides in…. It’s a major PITA to get on there
@Three60Crusader6 ай бұрын
Is this different from a fuel tank pressure sensor? Do both need to be replaced? I’m getting P0451 for the code.
@djnemesis82pluss18776 ай бұрын
Not sure but the dealership kept trying to tell me at least one of the sensors was in the tank. But I think they were just trying to keep me from doing it myself
@Three60Crusader6 ай бұрын
@@djnemesis82pluss1877Yeah I called Ford and they said it’s a generic code and usually it’s the Purge Valve that went bad and not the actual sensors. But of course no way to truly tell without seeing it.
@djnemesis82pluss18776 ай бұрын
@@Three60Crusader put it this way those sensors in this video are a major problem and if u took it to the dealership and it has any of the problems associated with those sensors they’re going to replace them unless they’ve already been replaced
@Three60Crusader5 ай бұрын
@@djnemesis82pluss1877They’re telling me it’s the fuel pressure sensor on the gas tank. Telling me they gotta drop all this stuff just to change it and will cost like 800 bucks. Idk if it’s a pressure sensor or the fuel pump control module they’re talking about. To my knowledge there isn’t a fuel pressure sensor on the gas tank…?
@user-oj5el2to4f6 ай бұрын
Thanks for your time to upload this video!Im having hard time to find one on eBay or at the dealership for 2011 same as yours!Can you help sharing the supplier please
@djnemesis82pluss18776 ай бұрын
Shouldn’t be hard to find but they make 2 different ones for the xp900
@user-oj5el2to4f6 ай бұрын
Here in Quebec the dealership quoted at 890$ I have the same 3 big connectors as you.On eBay found one that has wire only
@djnemesis82pluss18776 ай бұрын
@@user-oj5el2to4ftry looking for a 2012 also u can probably call rm stator and see if they have one
@user-ns7zw4qs8r6 ай бұрын
What would make a Ford Escape 2013 miss when in drive only when you stop
@tonywdidit88266 ай бұрын
what a useless video. Couldnt hear anything...stupid
@warriorplutotrent38276 ай бұрын
This was an pain in the ass to change. The one at the bottom. I did it today on an 2018 escape 1.5. I didn't have the space you have because the intake is made different. The engine is a real piece of shit. I was doing it for a friend of mine but never again. Horribly made engine. Way worse than Mercedes. I spent an hour trying to get a tool on the sensor to turn it. It was very hard to do.
@michaelanthony38167 ай бұрын
Get a washer for the top of the spring try different thicknesses good luck
@ahishahcarey71288 ай бұрын
Can we see a video how u fixed it
@Redfox4898 ай бұрын
Amazing .. we lack honesty nowadays .. thx dude
@heidihoes92329 ай бұрын
Did you use bleach?
@djnemesis82pluss18779 ай бұрын
No just starbrite like the title says
@douglasvannuys9 ай бұрын
Nice Job Man!
@woody4u2479 ай бұрын
If you lose your remote & just run into HF & you're in a hurry, or have a winch mounted where it's hard to access to swap the controller mated to the remote.... the kit HF sells now, comes with a new remote and an adapter that simply plugs in where the wired remote plugs in... ready to winch right away... you can always swap it out internally later when you have time.
@djnemesis82pluss18779 ай бұрын
Yeah I actually use that now since I be having to many trail sodas and lost that remote 😂 used winch 3 times and I’m on my 3rd remote
@lorriebphotography12510 ай бұрын
How do I get the handle off?
@djnemesis82pluss187710 ай бұрын
There’s probably little Allen screws on the bottom on both sides
@bubbasmith514211 ай бұрын
Can u just remove the nut and put gear oil or grease in ?
@djnemesis82pluss187711 ай бұрын
I’m sure u could but probably won’t help much. U would have to pack it very full of grease and then hope the cap pushes it threw when u put it on.probably just make a mess. It’s not hard to drill and tap the cap
@bubbasmith514211 ай бұрын
@@djnemesis82pluss1877 thanks ! I’m literally sore the next day from turning the wheel after a all day ride, I’ll give it a shot, thanks again
@djnemesis82pluss187711 ай бұрын
@@bubbasmith5142 looking forward to hear about the results
@bubbasmith514211 ай бұрын
@@djnemesis82pluss1877 will do, I’m overseas at work, I get back I’ll give it a try, thanks
@wemcal11 ай бұрын
Great video and great information
@mikebottorff59311 ай бұрын
I think i have exact same problem going on. Thanks for the video
@Atulipan Жыл бұрын
BROTHER!!! THANK YOU VERY MUCH FOR MAKING THIS VIDEO! This is the only video that helps fix my problem. Now I can get it done and be done with this falling door handle.😅 God bless you man.
@jamesjudd6577 Жыл бұрын
Man that looks like an awful thing to do lol. Any idea what the depth of rhe tank is?
@jackdeus3137 Жыл бұрын
Do you have a link to that controller
@djnemesis82pluss1877 Жыл бұрын
It’s just cheap China stuff from eBay
@kevinn4038 Жыл бұрын
Look how wet that ice is. Lol
@djnemesis82pluss1877 Жыл бұрын
Ice is made of water 😉
@Steven_Herrmann Жыл бұрын
Beautiful sight!
@markb2775 Жыл бұрын
It’s all light beer to us and assumed anyone who drank light beer to be,,,, well woke all along 😊 Bandwagon jumpers unite.
@macaronisalad5 Жыл бұрын
There was a lot of full grown neck beards that caught feelings for old man trump and really got into the grooming that he gave them😅
@macaronisalad5 Жыл бұрын
They had no choice but to quit their favorite beer because the cult leader said so😮😅
@macaronisalad5 Жыл бұрын
L o l all those snowflakes had to quit drinking their favorite beer😅
@victorstahl2897 Жыл бұрын
I bet if you wait till the end of the night dumpsters will be full of free budlight 😂😂😂
@mariosaccoccio1688 Жыл бұрын
It wasn't only just about the ad,that was bad enough. It was the way their customers were portrayed as "frat boys." Don't bite the hand that feeds you!
@chrisneu5133 Жыл бұрын
No kidding it's not. Christian bigots don't drink anyway. It's against their religion. Pathetic.
@stevewinfree1828 Жыл бұрын
Hahaha the result of wusses throwing a wittle hissy fit over a beer can 😂😂😂😂
@_BostonMatt Жыл бұрын
No we're sick of you people shoving this agenda down our throats, and we are showing it with our wallets
@mariosaccoccio1688 Жыл бұрын
You'll never get it.
@stevewinfree1828 Жыл бұрын
@@mariosaccoccio1688 Nope...will never understand cancel culture bigots....you're right. Ew gays are icky icky yucky so I am going to pretend they groom kids to really make them hurt and go away in society. Grow the F up.
@LilBoopas Жыл бұрын
Banquets are good as hell
@JustinBiddix Жыл бұрын
Coors light is good. But they send checks to the queer’s also. I think yuengling is the only straight beer left.
@SamBlitz Жыл бұрын
Hahahaha 😂 love it
@MrMikeFogg Жыл бұрын
Can you do that to mine?!! AMAZING!! I'm in Utah.
@djnemesis82pluss1877 Жыл бұрын
It ain’t brain science. Thanks
@SaltLifeSeaC Жыл бұрын
I have a 2016 escape 1.6 that’s just cranking and no start. Can the Fuel pressure sensor be a reason?
@djnemesis82pluss1877 Жыл бұрын
It’s a very well-known probably wouldn’t be a bad idea to change them regardless
@johnmarsch9706 Жыл бұрын
Did I miss the part getting the tank out of the boat? Did you go though the window?
@djnemesis82pluss1877 Жыл бұрын
Threw the window
@johnmarsch9706 Жыл бұрын
@@djnemesis82pluss1877 smelled gas yesterday... dreading the thought. I'm guessing you removed the glass and frame. Did you have to cut any of the fiberglass?
@djnemesis82pluss1877 Жыл бұрын
@@johnmarsch9706 removed whole window frame you’ll need a heat gun to free up the sealant keeping the window in. Didn’t cut anything in the window area
@ramtruth3 Жыл бұрын
How long did it take? I’m in the same situation
@djnemesis82pluss1877 Жыл бұрын
Over night works really well
@ramtruth3 Жыл бұрын
@@djnemesis82pluss1877 would apple cider vinegar work. Should I let it sit for a hr or so? I tried it for like 20 min and the yellow grime is still visible. thx
@djnemesis82pluss1877 Жыл бұрын
@@ramtruth3 not sure depends on how bad it is.. I’ve only used the 30% stuff.
@ramtruth3 Жыл бұрын
@@djnemesis82pluss1877 ordered 75% vinegar to pour on it. Mines is similar to yours. Tried baking soda and apple vinegar and didn’t do the job. That yellow stuff is stuck. I’ve read vinegar is pretty strong, hoping it does the job. So let it sit overnight, right?
@djnemesis82pluss1877 Жыл бұрын
@@ramtruth3 over night should do it. Have u removed the ice maker from the fridge ?
@FaithfulAZ Жыл бұрын
Would this cuss hesitation on load. My turbo is kicking n and out like it’s low on fuel. My rpm’s go down as I’m driving. Only on highway speeds. I changed the transmission fluid already. But I think it may be the waste gate in mine. Would do you think.
@johnware8270 Жыл бұрын
I'm currently fighting a similar issue I'll let you know if I get it solved if you'll do the same.
@FaithfulAZ Жыл бұрын
@@johnware8270 thanks.
@FaithfulAZ Жыл бұрын
@@johnware8270I have narrowed it down to BPV valve or waste gate or Fuel pressure sensor. But I don’t wanna just throw parts at it. I’m trying to figure it out and post it for all people to see.
@MrFuselier088 ай бұрын
I'm glad I found someone that's having the same issue did you get it fixed yet I'm having the same problem I replace my purge valve and it's still going the same I'm getting a EVAP p1450 but I'm getting tired of the jerkin buckin feelin
@FaithfulAZ8 ай бұрын
@@MrFuselier08 I haven’t gotten another escape in as of yet. I will update when I do.
@djnemesis82pluss1877 Жыл бұрын
Update. Been on a few rides everything is still good. Havent had one single power steering issue since. May want to put some blue lock tight on the adjustment nut
Пікірлер
Same issue and will need to do the dame. I appreciate the video.
Looks good, I want those templates! I bought a 12-volt mini split off of AliExpress for $400 and been using it for a year. I've got 2, 200 amp hour lithium batteries it's awesome. But I love the hidden window shaker.
Dude, I feel like such an idiot! I hot a Apex a few months ago. I had it installed with a bumper. When the install was done they didn't give me the instructions or any info for the winch. So the otherday I needed it and cldnt get it to work wirelessly. I ended up using the wired attachment. Since then I've tried everything to figure this out. Of course the last resort was U Tube. Well in the 1st cple minutes of your video was the answer. Since my winch is installed in the bumper, you really can't see the plug for the wired connection. After watching the 1st cple minutes of your video You said something about turning the remote switch on! OMG, wow, of course it has a switch to turn that on! Thanks for the video and hope everyone else finds your video helpful!
I followed your instruction and saved our boat. Awesome
Hey man just want to say thanks for putting this video up - I just fixed mine the same way after watching this. I used some very fine fishing braid wrapped around the brush wire to keep the brush retracted while fitting. Very fiddly but it worked. Thanks again!!
That’s pretty wild lol
Pro guy needs a clean shop
Good job, mine just died. Maybe I need a new motor. Thanks
Hey thanks! I’ve been avoiding this repair because I hadn’t taken to time to find a fix… for over a year. My grandad used that method on boats, cars, docks etc. and the red loctite was on my mind too. Great video!
Perfect! I got this fridge used and this seems like the only issue. Now it's fixed. Thank you very much!
What did it do when u noticed it how did it pull?
That's some good shit right there. I'm thinking about buying a cyclone that has had the door rebuilt and its heavy AF so thinking about rebuilding with some aluminum
Very nice job there, my friend! Want to do another one?😊
Had an upgrade custom suspension but my steering rack boot is not connected,how I zip tie it to wat
Mine are fucked up. If u make the rack Greasable I wouldn’t even worry about it . But there’s a little channel on the rack the boot rides in…. It’s a major PITA to get on there
Is this different from a fuel tank pressure sensor? Do both need to be replaced? I’m getting P0451 for the code.
Not sure but the dealership kept trying to tell me at least one of the sensors was in the tank. But I think they were just trying to keep me from doing it myself
@@djnemesis82pluss1877Yeah I called Ford and they said it’s a generic code and usually it’s the Purge Valve that went bad and not the actual sensors. But of course no way to truly tell without seeing it.
@@Three60Crusader put it this way those sensors in this video are a major problem and if u took it to the dealership and it has any of the problems associated with those sensors they’re going to replace them unless they’ve already been replaced
@@djnemesis82pluss1877They’re telling me it’s the fuel pressure sensor on the gas tank. Telling me they gotta drop all this stuff just to change it and will cost like 800 bucks. Idk if it’s a pressure sensor or the fuel pump control module they’re talking about. To my knowledge there isn’t a fuel pressure sensor on the gas tank…?
Thanks for your time to upload this video!Im having hard time to find one on eBay or at the dealership for 2011 same as yours!Can you help sharing the supplier please
Shouldn’t be hard to find but they make 2 different ones for the xp900
Here in Quebec the dealership quoted at 890$ I have the same 3 big connectors as you.On eBay found one that has wire only
@@user-oj5el2to4ftry looking for a 2012 also u can probably call rm stator and see if they have one
What would make a Ford Escape 2013 miss when in drive only when you stop
what a useless video. Couldnt hear anything...stupid
This was an pain in the ass to change. The one at the bottom. I did it today on an 2018 escape 1.5. I didn't have the space you have because the intake is made different. The engine is a real piece of shit. I was doing it for a friend of mine but never again. Horribly made engine. Way worse than Mercedes. I spent an hour trying to get a tool on the sensor to turn it. It was very hard to do.
Get a washer for the top of the spring try different thicknesses good luck
Can we see a video how u fixed it
Amazing .. we lack honesty nowadays .. thx dude
Did you use bleach?
No just starbrite like the title says
Nice Job Man!
If you lose your remote & just run into HF & you're in a hurry, or have a winch mounted where it's hard to access to swap the controller mated to the remote.... the kit HF sells now, comes with a new remote and an adapter that simply plugs in where the wired remote plugs in... ready to winch right away... you can always swap it out internally later when you have time.
Yeah I actually use that now since I be having to many trail sodas and lost that remote 😂 used winch 3 times and I’m on my 3rd remote
How do I get the handle off?
There’s probably little Allen screws on the bottom on both sides
Can u just remove the nut and put gear oil or grease in ?
I’m sure u could but probably won’t help much. U would have to pack it very full of grease and then hope the cap pushes it threw when u put it on.probably just make a mess. It’s not hard to drill and tap the cap
@@djnemesis82pluss1877 thanks ! I’m literally sore the next day from turning the wheel after a all day ride, I’ll give it a shot, thanks again
@@bubbasmith5142 looking forward to hear about the results
@@djnemesis82pluss1877 will do, I’m overseas at work, I get back I’ll give it a try, thanks
Great video and great information
I think i have exact same problem going on. Thanks for the video
BROTHER!!! THANK YOU VERY MUCH FOR MAKING THIS VIDEO! This is the only video that helps fix my problem. Now I can get it done and be done with this falling door handle.😅 God bless you man.
Man that looks like an awful thing to do lol. Any idea what the depth of rhe tank is?
Do you have a link to that controller
It’s just cheap China stuff from eBay
Look how wet that ice is. Lol
Ice is made of water 😉
Beautiful sight!
It’s all light beer to us and assumed anyone who drank light beer to be,,,, well woke all along 😊 Bandwagon jumpers unite.
There was a lot of full grown neck beards that caught feelings for old man trump and really got into the grooming that he gave them😅
They had no choice but to quit their favorite beer because the cult leader said so😮😅
L o l all those snowflakes had to quit drinking their favorite beer😅
I bet if you wait till the end of the night dumpsters will be full of free budlight 😂😂😂
It wasn't only just about the ad,that was bad enough. It was the way their customers were portrayed as "frat boys." Don't bite the hand that feeds you!
No kidding it's not. Christian bigots don't drink anyway. It's against their religion. Pathetic.
Hahaha the result of wusses throwing a wittle hissy fit over a beer can 😂😂😂😂
No we're sick of you people shoving this agenda down our throats, and we are showing it with our wallets
You'll never get it.
@@mariosaccoccio1688 Nope...will never understand cancel culture bigots....you're right. Ew gays are icky icky yucky so I am going to pretend they groom kids to really make them hurt and go away in society. Grow the F up.
Banquets are good as hell
Coors light is good. But they send checks to the queer’s also. I think yuengling is the only straight beer left.
Hahahaha 😂 love it
Can you do that to mine?!! AMAZING!! I'm in Utah.
It ain’t brain science. Thanks
I have a 2016 escape 1.6 that’s just cranking and no start. Can the Fuel pressure sensor be a reason?
It’s a very well-known probably wouldn’t be a bad idea to change them regardless
Did I miss the part getting the tank out of the boat? Did you go though the window?
Threw the window
@@djnemesis82pluss1877 smelled gas yesterday... dreading the thought. I'm guessing you removed the glass and frame. Did you have to cut any of the fiberglass?
@@johnmarsch9706 removed whole window frame you’ll need a heat gun to free up the sealant keeping the window in. Didn’t cut anything in the window area
How long did it take? I’m in the same situation
Over night works really well
@@djnemesis82pluss1877 would apple cider vinegar work. Should I let it sit for a hr or so? I tried it for like 20 min and the yellow grime is still visible. thx
@@ramtruth3 not sure depends on how bad it is.. I’ve only used the 30% stuff.
@@djnemesis82pluss1877 ordered 75% vinegar to pour on it. Mines is similar to yours. Tried baking soda and apple vinegar and didn’t do the job. That yellow stuff is stuck. I’ve read vinegar is pretty strong, hoping it does the job. So let it sit overnight, right?
@@ramtruth3 over night should do it. Have u removed the ice maker from the fridge ?
Would this cuss hesitation on load. My turbo is kicking n and out like it’s low on fuel. My rpm’s go down as I’m driving. Only on highway speeds. I changed the transmission fluid already. But I think it may be the waste gate in mine. Would do you think.
I'm currently fighting a similar issue I'll let you know if I get it solved if you'll do the same.
@@johnware8270 thanks.
@@johnware8270I have narrowed it down to BPV valve or waste gate or Fuel pressure sensor. But I don’t wanna just throw parts at it. I’m trying to figure it out and post it for all people to see.
I'm glad I found someone that's having the same issue did you get it fixed yet I'm having the same problem I replace my purge valve and it's still going the same I'm getting a EVAP p1450 but I'm getting tired of the jerkin buckin feelin
@@MrFuselier08 I haven’t gotten another escape in as of yet. I will update when I do.
Update. Been on a few rides everything is still good. Havent had one single power steering issue since. May want to put some blue lock tight on the adjustment nut