Don't get me wrong, I own a few of your builds. I love them, pin n weld mk3 comp build is my favorite. You guys really should send a few out to a couple youtube guys and get some super marketing rolling. Even if you tell them to "pass them around" I've heard is getting pretty common now
@albertptranКүн бұрын
Nice!
@ninjascout4682 күн бұрын
I received my A2 20" quad rail upper thank you all for doing an awesome job, I highly recommend your products from now on as this was my first order but won't be my last
@ninjascout4688 күн бұрын
That's Hella nice can't wait for my A2 quad upper too get here and parts . Going for battlefield 3 vibe
@b.kingsfirearms87603 күн бұрын
That will be an awesome build. Be sure to send us some photos once you get it finished! Thanks for watching and commenting.
@ExtremelyAverageMan9 күн бұрын
Bit of a type-o with the "Correct Ejection" should be 3:00-4:30, not 3:00-4:00. I understand you're trying to sell a product, but this is easily mitigated with a heavier buffer weight, adjustable gas block, or combination of the two. This is known as "tuning" your rifle.
@ninjascout46811 күн бұрын
Glad I found you guys I have my cart loaded up for a a3 ish build waiting on pd, doing my bf3 20" soon
@hairydogstail14 күн бұрын
The A5 does not reduce felt recoil..In fact it increases it compared to the JP SCS..The only advantage is the increase in buffer weight that can be selected..
@PaulProchko19 күн бұрын
So...very similar to the Vltor system ? Really, it sounds identical ...Yes ?
@b.kingsfirearms876018 күн бұрын
@@PaulProchko yes the same
@neonoir740222 күн бұрын
BKF is legit. Their lpks do need better qc but other than that, good to go
@b.kingsfirearms876011 күн бұрын
Thanks for watching and commenting! We are working on improving the accuracy of our parts kits and improving product packaging. We really appreciate the feedback!
@BudgetBully50422 күн бұрын
Im about to give yalls 13.9" a chance.
@raffieb76225 күн бұрын
Im always overgassed
@tetototupunaАй бұрын
Thank you
@mikeklyczek551Ай бұрын
Do you plan on offering a Mid-Length quad rail as well?
@b.kingsfirearms8760Ай бұрын
We may in the future, but as of now we are only offering that rail in carbine and rifle lengths. Thanks for watching and commenting!
@tylerramsey13888 күн бұрын
Really look forward to getting ahold of a mid lenght version. Am running a bkf 16in mid length with your lower rife has shot great to 400 when I can take it out further I plan to just to see what will happen as well running a carry handle with romeo5 atop when I get tired of the spr set up. Keep up the good work!
@Innawoods7614Ай бұрын
Game changer. Want it.
@BlackTongue.Ай бұрын
Available when? I want one. What's the weight? Website says 1 pound but that can't be right. Your main competitor in the mlok drop in aluminum would be the Midwest Industries model MI-17M which is only 5oz. Theirs has a "bridge" on the top piece that bridges the gap from receiver to handguard, but I like the open gap on yours better actually.
@b.kingsfirearms8760Ай бұрын
The weight on the MLOK drop-in is 5.6oz. The weight on the Quad drop-in is 9.6oz(with fasteners). Both will be available in larger quantities in mid-July. However, we have 1 of each available now(if you hurry). Thanks for watching and commenting!
@ThiccPunn_003Ай бұрын
@b.kingsfirearms8760 who makes the drop in quad rails for y'all? Very interested in those
@BlackTongue.Ай бұрын
Available when approximately? I want one and I also want one of the drop in MLOKs
@b.kingsfirearms8760Ай бұрын
Both will be available in larger quantities in mid-July. However, one of each is available now. Thanks for watching and commenting!
@ethanaverette6890Ай бұрын
Is this with one of your bkf barrels?
@b.kingsfirearms8760Ай бұрын
Yes it is. We typically use our BKF barrels in all of our builds. All BKF barrels also have a lifetime warranty and accuracy guarantee.
@noooooooo88Ай бұрын
Gimmie
@streamylcАй бұрын
That's pretty sick..... I assume the benefits are near negligible in a 16"? Being a bigger/tall dude, I like this.
@b.kingsfirearms8760Ай бұрын
There is still some reduction in felt recoil compared to a carbine buffer systems on 16" and shorter barrels, but mainly useful for weapons tuned to use rifle length buffer system, but allows for use of adjustable stock, rather than a fixed rifle stock. Really opens up the options for stocks to choose from on your rifle build.
@chandlertechnologyАй бұрын
Pretty useless video. Wanted info on it and got virtually none. Waste of time.
@streamylcАй бұрын
What questions were left for you here? He literally covered every aspect of how this is different from a carbine & rifle buffer syatems.
@hairydogstail14 күн бұрын
@@streamylcThe A5 does not reduce felt recoil and the only advantage is the increase in buffer weight selection.. There is no other advantage..
@MagnusPrimeE1Ай бұрын
I'm 3 orders in! Will probably be 4 after today (Advanced Armalite Firearms LLC)
@mattcorley9811Ай бұрын
I have 2 orders in June already, but this just convinced me to place another lol
@chriscoff835Ай бұрын
Man those XM177 clones you-all make sure look sweet. The chrome lined barrel and C158 bolt version is awful tempting
@b.kingsfirearms8760Ай бұрын
We will be releasing the chrome lined versions in July 2024! C158 Material is extremely hard to source.
@ReiMonCoHАй бұрын
That thing sucked as a knife. I never took it out of my duffel bag
@b.kingsfirearms8760Ай бұрын
Perfect for opening MRE's though!
@robertdoyle4650Ай бұрын
Any chance you guys will offer A1 uppers?
@b.kingsfirearms8760Ай бұрын
Yes, we are working on getting A1 uppers in stock. Check back to our website soon! Thanks for watching and commenting!
@unclebubba5584Ай бұрын
Too bad I've need seen a 1917 bayonet that would fit... en.m.wikipedia.org/wiki/M1917_bayonet
@b.kingsfirearms8760Ай бұрын
We got the A1 uppers in! bkingsfirearms.com/shop/ar15-upper-receivers/bkf-m16a1-stripped-upper-receiver-anodized/ . We will have the complete A1 uppers and complete A1 rifles on the website soon as well.
@rhysdevaney4465Ай бұрын
@b.kingsfirearms8760 i really want to win this gun giveaway 🎉
@unclebubba5584Ай бұрын
hmm, 4.5 2 stage...on my list now.
@albertptranАй бұрын
Nice
@oe3567Ай бұрын
Dang, y’all even got affordable options
@theREALdingusMDАй бұрын
Good guy Blake.
@b.kingsfirearms8760Ай бұрын
Thanks man I appreciate it!
@williamzanetti7844Ай бұрын
This company doesn’t get enough credit I bought upper build kit for my 14.5 and a complete upper 11.5 Amazing products at an amazing price I hope other KZreadrs find these guys and promote their products.
@b.kingsfirearms8760Ай бұрын
We truly are a hidden gem, Thanks for supporting us! USA made products with lifetime warranty!!!
@williamzanetti7844Ай бұрын
@@b.kingsfirearms8760 Thank you for the response I’ll keep on promoting you by word of mouth . Just promise you guys will keep the prices reasonable because I know once this company is found by the masses they will be on everyone’s top 5 AR list.
@AdamsCabbinsАй бұрын
As a Veteran and a long time shooter I don't have another AR manufacturer I like or trust more than BKF! 🇺🇲
@williamzanetti7844Ай бұрын
@@AdamsCabbins I agree 100%
@williamzanetti7844Ай бұрын
@@b.kingsfirearms8760 if you ever want to open a store in South West Florida or need a sales rep in the South Florida market hit me up please I would love to promote your products
@timothydahlin5321Ай бұрын
@shawngrays9087Ай бұрын
Used this with a 400 legend build, 18 inch carbine length, It has changed my prospective on future builds, is my go to for now on
@denisberte778Ай бұрын
There's definitely a difference between the 7lb and custom 4.5lb. The Bkingsfirearms 4.5 trigger sounds smoother and a tad lighter, a winner for sure. Regards, Denis Berte' USMC/SF
@b.kingsfirearms8760Ай бұрын
Yes, the BKF 4.5lb 2-stage fire control group is definitely smoother and more refined, and at a competitive price. The reset on the performance 2-stage trigger is also a huge improvement. However, even our standard Mil-Spec triggers feature fully polished mating surfaces, and are a considerable upgrade compared to most other Mil-Spec Triggers. Thanks for watching and commenting and thank you for your service!
@killerkill4564Ай бұрын
Can y’all add just the ammo even if just 10 round clips I definitely like the bundle for a first time buy tho
@b.kingsfirearms8760Ай бұрын
Here is the listing for just the ammo bkingsfirearms.com/shop/ammunition/m855a1-556nato-62gr-10-round-on-mil-spec-stripper-clip/
@unclebubba5584Ай бұрын
😂😂😂 neither A1's or XM177's had A2 w/e adjustable rear sights....ask me how I know..
@b.kingsfirearms8760Ай бұрын
You are exactly right, the XM177 and A1 example models shown here are using a regular A2 uppers. You definitely know your M16's. We are hoping to have A1 uppers available soon as well for folks wanting to build the earlier models. Thanks for watching and commenting! Check back soon as we continue to add more retro parts and accessories.
@unclebubba5584Ай бұрын
I wish we had these types of uppers 78-82, those A1 sights SUCKED A××. not to mention some of the sewer pipe barrels leftover from Nam.
@b.kingsfirearms8760Ай бұрын
Bad sights paired with an inaccurate barrel does not sound fun, Haha! Luckily our retro barrels have 1MOA guaranteed accuracy(with match grade ammo). If only we could ship some barrels back to the 1970s, rifle qualifications would have been much easier. 😂
@unclebubba5584Ай бұрын
@@b.kingsfirearms8760 was hard enough a kid who never fired a rifle got a pizza box... finally shot expert my last trip to the range, barely.🤣🤣🤣 I earrned all 3 qual badges...
@b.kingsfirearms8760Ай бұрын
That's awesome! That is impressive to get all quals with today's modern equipment, let alone those earlier M16s. Thanks for the reply! We love hearing about these stories and experiences from the folks that actually used these early military rifles.
@MrBossuporbowout2 ай бұрын
I love it. Plenty of options. Hell the optionnto have options is great 👍🏽
@b.kingsfirearms87602 ай бұрын
We will be continuing to add more options and features in the near future. Thanks for watching and commenting! We are excited for people to try our new AR configurator.
@IndependentArmz2 ай бұрын
The Mk-1 looks good too.
@b.kingsfirearms87602 ай бұрын
The BKF Mk1 comp is absolutely amazing for reducing felt recoil and muzzle rise. It is also very reasonably priced and available in 5.56mm or 7.62mm. Thanks again for watching and commenting!
@IndependentArmz2 ай бұрын
Bkings is always the first place I look for parts. Uppers-Barrels-and The M4 Mod-1 Handguard is my new favorite handguard.
@b.kingsfirearms87602 ай бұрын
Thanks for watching and commenting! The MOD-1 handguard is especially nice for lightweight AR builds.
@daltonbeall26572 ай бұрын
Sledgehammer vs Warhammer? What’s the difference?
@b.kingsfirearms87602 ай бұрын
The Sledgehammer has more gas defeating features(ports, vents, etc.), especially nice when running a suppressed. The Sledgehammer also has larger handles with a little less aggressive texture.
@Innawoods76142 ай бұрын
Ahhh you guys do have a YT channel. Been looking at your stuff online for a while now.
@900Redshark2 ай бұрын
There are many factors that affect ejection. Changing out your O ring extractor will change the ejection for one example.
@richlewis88122 ай бұрын
Hello. I am having a problem with my magazine clip not fully inserted in my AR 15, I have to hit it hard to fully insert it in. Any ideas why this happening? Thank you
@b.kingsfirearms87602 ай бұрын
Thanks for watching and commenting! There are a few things that could cause that issue. It could be the magazine itself, the magazine is overloaded, the magazine catch is possibly threaded in too far, or in rare cases the lower could be out of specification. Feel free to comment back if you are still having issues.
@johnbaldonasa67902 ай бұрын
Is that a 10.5 or 11.5 upper
@b.kingsfirearms87602 ай бұрын
11.5” BKF with pinned gas block
@-kepha88282 ай бұрын
Hey BKF, im from Bucyrus OH, but do some fleet work in Lima. I will be buying a mod 0 upper, ar9 bcg, and ambi safety from you guys. Unfortunatly I had previously already bought a Palmetto State Armory lower that came with the Maxim defense CCS pistol brace I wanted. But now that ive discovered BKF, I kinda want to get the mod 0 lower to go with the upper. But the mod 0 lowers are stripped. Is it safe to say that all of the palmetto state armory parts (mag release, trigger, etc .) Will transfer over to your mod 0 lower, with no issues? Thanks guys!
@b.kingsfirearms87602 ай бұрын
All mil-spec parts should be able to be swapped over to a MOD-0 Lower without issues, assuming the PSA lower you have uses mil-spec components. However, we do sell completely assembled and tested MOD-0 Lower for around 110 bucks more than a stripped version. I would probably recommend that so you don't have to fiddle with punching out roll pins and you could keep both lowers complete. Either way, feel free to stop into our storefront and we can get you taken care of. Thanks for watching and commenting!
@-kepha88282 ай бұрын
@@b.kingsfirearms8760 website says the AR9 BCG is available on backorder. About when will they be available? I am in Nashville for work, but will be home in a week. I'd like to drive to Lima next Monday (the 13th), and get the mod 0 upper, charging handle, AR9 BCG, and 45° ambidextrous safety switch. And I will seriously be considering the mod 0 lower. It's crazy I found you guys on the internet through a recommendation from Doug at Blowback9 on KZread. The company I work with is Indiana and Ohio railroad, and they are just around the corner on N Sugar street.
@-kepha88282 ай бұрын
@@b.kingsfirearms8760 I run a fleet for I&0 railroad. Its right on N Sugar St. Funny it's not far from you guys. I had never heard of BKF until Doug (Blowback9 on KZread) highly recommended your products. He does very extensive tests on various brands for blowback AR9 pistols. Of all the BCGs he has tested, the BKF was one of the highest rated and what he recommends to all his followers. He also ranks your BA ECP 9mm barrel as the 2nd best barrel to buy, right behind Macon armorys $170 barrel. He told me to order from you guys. So I looked your company up, and what's the odds, just 1 mile down the road from where I work. Anyways, I manage 6 different states, so I am currently in Nashville. Will be home Monday the 13th and plan to stop by your store. I need a AR9 BCG. It says it is only available on backorder. Will that be in by the 13th by any chance? I also need to get a mod 0 upper, charging handle, 45° ambidextrous safety, and possibly a mod 0 lower. But I forgot to mention, this is for an AR9 pistol, but I want to use a 5.56 lower (so I can run off Endo mags instead of 9mm mags). Do you have 5.56 mod 0 lowers for a pistol setup?
@garymercerjr85452 ай бұрын
It is an awesome safety. Im a south paw, so Ambi Safeties make life a lot easier. I've tried a few different brands, and all my rifles have this safety selector installed.
@b.kingsfirearms87602 ай бұрын
Glad to hear man! We appreciate the support.
@garymercerjr85452 ай бұрын
@b.kingsfirearms8760 your welcome. Y'all make some really good parts. All my Rifles have your lower parts kit in them. I've got a bunch of other parts in my rifles. I trust your parts as much as I do my SOLGW parts and they're half the price.
@unclebubba55842 ай бұрын
doesn't provide the options I am seeking.
@b.kingsfirearms87602 ай бұрын
What are you looking for?
@unclebubba55842 ай бұрын
@@b.kingsfirearms8760 O.D.Green builders set w/9.875 ffssr handguard, 10.3" 223 wylde hanson barrel...for an sbr project. Just waiting for things to be back in stock.
@b.kingsfirearms87602 ай бұрын
We are going to have a completely different configurator for cerakoting options as soon as our shop is set up. We just had our ovens and compressors delivered.
@unclebubba55842 ай бұрын
@@b.kingsfirearms8760 Then I will keep looking forward to completing my project. Congratulations on your continuing success.
@b.kingsfirearms87602 ай бұрын
Thank you, we appreciate the support!
@mattsharp80333 ай бұрын
Will a bayonet fit on it?
@b.kingsfirearms8760Ай бұрын
Bayonet's go onto your bayonet lug haha
@mattsharp8033Ай бұрын
Hahaha... Yeah, but the bayonet ring has to fit over the muzzle device. Haha. I called your Company and the representative on the phone was far more knowledgeable and serious. It turns out, yes, an M7/M9 bayonet will fit perfectly over this muzzle device.
@Darkness_Actual3 ай бұрын
What's the buffer and spring setup? I normally run an H2/3 and a Sprinco white I for carbines and pistols.
@b.kingsfirearms87603 ай бұрын
We used an H2 and a Sprinco RED in this build. We have a longer video on the topic that shows a has a bit more information. kzread.info/dash/bejne/k45rysqpZ9vNaJs.html.
@Darkness_Actual3 ай бұрын
I'm doing that exact same rifle now with y'alls components and fuck being cLoNe correct. 😅
@b.kingsfirearms87603 ай бұрын
The retro builds are really fun to shoot even if they are not 100% accurate museum quality replicas. Thanks for watching and commenting!
@Darkness_Actual3 ай бұрын
Oh I know and at the end of the day the people who bitch and moan about parts not being correct deserve to be mocked. I got an unassembled A2 from y'all before the assembled version was available to do an XM style build.
@b.kingsfirearms87603 ай бұрын
Nice! The rear sights have been tough to get but were finally getting them in so we should have those available individually soon, along with all lengths of round A2 handguards. If you wanted, you could possibly reach out to our returns team, and they may be able to get you store credit if you return the unassembled A2(if its still in new condition) and you could order an assembled version(with slightly more cost obviously). It would save you the headache of rear sight assembly installation and save you a little money compared to buying the parts individually.
@b.kingsfirearms87603 ай бұрын
@Darkness_Actual We got sights now, shoot us an email and they will get you taken care of.
@Darkness_Actual3 ай бұрын
@@b.kingsfirearms8760wasn't expecting that but sounds good. Should the email be in reference to a stand alone sight assembly?
Пікірлер
Don't get me wrong, I own a few of your builds. I love them, pin n weld mk3 comp build is my favorite. You guys really should send a few out to a couple youtube guys and get some super marketing rolling. Even if you tell them to "pass them around" I've heard is getting pretty common now
Nice!
I received my A2 20" quad rail upper thank you all for doing an awesome job, I highly recommend your products from now on as this was my first order but won't be my last
That's Hella nice can't wait for my A2 quad upper too get here and parts . Going for battlefield 3 vibe
That will be an awesome build. Be sure to send us some photos once you get it finished! Thanks for watching and commenting.
Bit of a type-o with the "Correct Ejection" should be 3:00-4:30, not 3:00-4:00. I understand you're trying to sell a product, but this is easily mitigated with a heavier buffer weight, adjustable gas block, or combination of the two. This is known as "tuning" your rifle.
Glad I found you guys I have my cart loaded up for a a3 ish build waiting on pd, doing my bf3 20" soon
The A5 does not reduce felt recoil..In fact it increases it compared to the JP SCS..The only advantage is the increase in buffer weight that can be selected..
So...very similar to the Vltor system ? Really, it sounds identical ...Yes ?
@@PaulProchko yes the same
BKF is legit. Their lpks do need better qc but other than that, good to go
Thanks for watching and commenting! We are working on improving the accuracy of our parts kits and improving product packaging. We really appreciate the feedback!
Im about to give yalls 13.9" a chance.
Im always overgassed
Thank you
Do you plan on offering a Mid-Length quad rail as well?
We may in the future, but as of now we are only offering that rail in carbine and rifle lengths. Thanks for watching and commenting!
Really look forward to getting ahold of a mid lenght version. Am running a bkf 16in mid length with your lower rife has shot great to 400 when I can take it out further I plan to just to see what will happen as well running a carry handle with romeo5 atop when I get tired of the spr set up. Keep up the good work!
Game changer. Want it.
Available when? I want one. What's the weight? Website says 1 pound but that can't be right. Your main competitor in the mlok drop in aluminum would be the Midwest Industries model MI-17M which is only 5oz. Theirs has a "bridge" on the top piece that bridges the gap from receiver to handguard, but I like the open gap on yours better actually.
The weight on the MLOK drop-in is 5.6oz. The weight on the Quad drop-in is 9.6oz(with fasteners). Both will be available in larger quantities in mid-July. However, we have 1 of each available now(if you hurry). Thanks for watching and commenting!
@b.kingsfirearms8760 who makes the drop in quad rails for y'all? Very interested in those
Available when approximately? I want one and I also want one of the drop in MLOKs
Both will be available in larger quantities in mid-July. However, one of each is available now. Thanks for watching and commenting!
Is this with one of your bkf barrels?
Yes it is. We typically use our BKF barrels in all of our builds. All BKF barrels also have a lifetime warranty and accuracy guarantee.
Gimmie
That's pretty sick..... I assume the benefits are near negligible in a 16"? Being a bigger/tall dude, I like this.
There is still some reduction in felt recoil compared to a carbine buffer systems on 16" and shorter barrels, but mainly useful for weapons tuned to use rifle length buffer system, but allows for use of adjustable stock, rather than a fixed rifle stock. Really opens up the options for stocks to choose from on your rifle build.
Pretty useless video. Wanted info on it and got virtually none. Waste of time.
What questions were left for you here? He literally covered every aspect of how this is different from a carbine & rifle buffer syatems.
@@streamylcThe A5 does not reduce felt recoil and the only advantage is the increase in buffer weight selection.. There is no other advantage..
I'm 3 orders in! Will probably be 4 after today (Advanced Armalite Firearms LLC)
I have 2 orders in June already, but this just convinced me to place another lol
Man those XM177 clones you-all make sure look sweet. The chrome lined barrel and C158 bolt version is awful tempting
We will be releasing the chrome lined versions in July 2024! C158 Material is extremely hard to source.
That thing sucked as a knife. I never took it out of my duffel bag
Perfect for opening MRE's though!
Any chance you guys will offer A1 uppers?
Yes, we are working on getting A1 uppers in stock. Check back to our website soon! Thanks for watching and commenting!
Too bad I've need seen a 1917 bayonet that would fit... en.m.wikipedia.org/wiki/M1917_bayonet
We got the A1 uppers in! bkingsfirearms.com/shop/ar15-upper-receivers/bkf-m16a1-stripped-upper-receiver-anodized/ . We will have the complete A1 uppers and complete A1 rifles on the website soon as well.
@b.kingsfirearms8760 i really want to win this gun giveaway 🎉
hmm, 4.5 2 stage...on my list now.
Nice
Dang, y’all even got affordable options
Good guy Blake.
Thanks man I appreciate it!
This company doesn’t get enough credit I bought upper build kit for my 14.5 and a complete upper 11.5 Amazing products at an amazing price I hope other KZreadrs find these guys and promote their products.
We truly are a hidden gem, Thanks for supporting us! USA made products with lifetime warranty!!!
@@b.kingsfirearms8760 Thank you for the response I’ll keep on promoting you by word of mouth . Just promise you guys will keep the prices reasonable because I know once this company is found by the masses they will be on everyone’s top 5 AR list.
As a Veteran and a long time shooter I don't have another AR manufacturer I like or trust more than BKF! 🇺🇲
@@AdamsCabbins I agree 100%
@@b.kingsfirearms8760 if you ever want to open a store in South West Florida or need a sales rep in the South Florida market hit me up please I would love to promote your products
Used this with a 400 legend build, 18 inch carbine length, It has changed my prospective on future builds, is my go to for now on
There's definitely a difference between the 7lb and custom 4.5lb. The Bkingsfirearms 4.5 trigger sounds smoother and a tad lighter, a winner for sure. Regards, Denis Berte' USMC/SF
Yes, the BKF 4.5lb 2-stage fire control group is definitely smoother and more refined, and at a competitive price. The reset on the performance 2-stage trigger is also a huge improvement. However, even our standard Mil-Spec triggers feature fully polished mating surfaces, and are a considerable upgrade compared to most other Mil-Spec Triggers. Thanks for watching and commenting and thank you for your service!
Can y’all add just the ammo even if just 10 round clips I definitely like the bundle for a first time buy tho
Here is the listing for just the ammo bkingsfirearms.com/shop/ammunition/m855a1-556nato-62gr-10-round-on-mil-spec-stripper-clip/
😂😂😂 neither A1's or XM177's had A2 w/e adjustable rear sights....ask me how I know..
You are exactly right, the XM177 and A1 example models shown here are using a regular A2 uppers. You definitely know your M16's. We are hoping to have A1 uppers available soon as well for folks wanting to build the earlier models. Thanks for watching and commenting! Check back soon as we continue to add more retro parts and accessories.
I wish we had these types of uppers 78-82, those A1 sights SUCKED A××. not to mention some of the sewer pipe barrels leftover from Nam.
Bad sights paired with an inaccurate barrel does not sound fun, Haha! Luckily our retro barrels have 1MOA guaranteed accuracy(with match grade ammo). If only we could ship some barrels back to the 1970s, rifle qualifications would have been much easier. 😂
@@b.kingsfirearms8760 was hard enough a kid who never fired a rifle got a pizza box... finally shot expert my last trip to the range, barely.🤣🤣🤣 I earrned all 3 qual badges...
That's awesome! That is impressive to get all quals with today's modern equipment, let alone those earlier M16s. Thanks for the reply! We love hearing about these stories and experiences from the folks that actually used these early military rifles.
I love it. Plenty of options. Hell the optionnto have options is great 👍🏽
We will be continuing to add more options and features in the near future. Thanks for watching and commenting! We are excited for people to try our new AR configurator.
The Mk-1 looks good too.
The BKF Mk1 comp is absolutely amazing for reducing felt recoil and muzzle rise. It is also very reasonably priced and available in 5.56mm or 7.62mm. Thanks again for watching and commenting!
Bkings is always the first place I look for parts. Uppers-Barrels-and The M4 Mod-1 Handguard is my new favorite handguard.
Thanks for watching and commenting! The MOD-1 handguard is especially nice for lightweight AR builds.
Sledgehammer vs Warhammer? What’s the difference?
The Sledgehammer has more gas defeating features(ports, vents, etc.), especially nice when running a suppressed. The Sledgehammer also has larger handles with a little less aggressive texture.
Ahhh you guys do have a YT channel. Been looking at your stuff online for a while now.
There are many factors that affect ejection. Changing out your O ring extractor will change the ejection for one example.
Hello. I am having a problem with my magazine clip not fully inserted in my AR 15, I have to hit it hard to fully insert it in. Any ideas why this happening? Thank you
Thanks for watching and commenting! There are a few things that could cause that issue. It could be the magazine itself, the magazine is overloaded, the magazine catch is possibly threaded in too far, or in rare cases the lower could be out of specification. Feel free to comment back if you are still having issues.
Is that a 10.5 or 11.5 upper
11.5” BKF with pinned gas block
Hey BKF, im from Bucyrus OH, but do some fleet work in Lima. I will be buying a mod 0 upper, ar9 bcg, and ambi safety from you guys. Unfortunatly I had previously already bought a Palmetto State Armory lower that came with the Maxim defense CCS pistol brace I wanted. But now that ive discovered BKF, I kinda want to get the mod 0 lower to go with the upper. But the mod 0 lowers are stripped. Is it safe to say that all of the palmetto state armory parts (mag release, trigger, etc .) Will transfer over to your mod 0 lower, with no issues? Thanks guys!
All mil-spec parts should be able to be swapped over to a MOD-0 Lower without issues, assuming the PSA lower you have uses mil-spec components. However, we do sell completely assembled and tested MOD-0 Lower for around 110 bucks more than a stripped version. I would probably recommend that so you don't have to fiddle with punching out roll pins and you could keep both lowers complete. Either way, feel free to stop into our storefront and we can get you taken care of. Thanks for watching and commenting!
@@b.kingsfirearms8760 website says the AR9 BCG is available on backorder. About when will they be available? I am in Nashville for work, but will be home in a week. I'd like to drive to Lima next Monday (the 13th), and get the mod 0 upper, charging handle, AR9 BCG, and 45° ambidextrous safety switch. And I will seriously be considering the mod 0 lower. It's crazy I found you guys on the internet through a recommendation from Doug at Blowback9 on KZread. The company I work with is Indiana and Ohio railroad, and they are just around the corner on N Sugar street.
@@b.kingsfirearms8760 I run a fleet for I&0 railroad. Its right on N Sugar St. Funny it's not far from you guys. I had never heard of BKF until Doug (Blowback9 on KZread) highly recommended your products. He does very extensive tests on various brands for blowback AR9 pistols. Of all the BCGs he has tested, the BKF was one of the highest rated and what he recommends to all his followers. He also ranks your BA ECP 9mm barrel as the 2nd best barrel to buy, right behind Macon armorys $170 barrel. He told me to order from you guys. So I looked your company up, and what's the odds, just 1 mile down the road from where I work. Anyways, I manage 6 different states, so I am currently in Nashville. Will be home Monday the 13th and plan to stop by your store. I need a AR9 BCG. It says it is only available on backorder. Will that be in by the 13th by any chance? I also need to get a mod 0 upper, charging handle, 45° ambidextrous safety, and possibly a mod 0 lower. But I forgot to mention, this is for an AR9 pistol, but I want to use a 5.56 lower (so I can run off Endo mags instead of 9mm mags). Do you have 5.56 mod 0 lowers for a pistol setup?
It is an awesome safety. Im a south paw, so Ambi Safeties make life a lot easier. I've tried a few different brands, and all my rifles have this safety selector installed.
Glad to hear man! We appreciate the support.
@b.kingsfirearms8760 your welcome. Y'all make some really good parts. All my Rifles have your lower parts kit in them. I've got a bunch of other parts in my rifles. I trust your parts as much as I do my SOLGW parts and they're half the price.
doesn't provide the options I am seeking.
What are you looking for?
@@b.kingsfirearms8760 O.D.Green builders set w/9.875 ffssr handguard, 10.3" 223 wylde hanson barrel...for an sbr project. Just waiting for things to be back in stock.
We are going to have a completely different configurator for cerakoting options as soon as our shop is set up. We just had our ovens and compressors delivered.
@@b.kingsfirearms8760 Then I will keep looking forward to completing my project. Congratulations on your continuing success.
Thank you, we appreciate the support!
Will a bayonet fit on it?
Bayonet's go onto your bayonet lug haha
Hahaha... Yeah, but the bayonet ring has to fit over the muzzle device. Haha. I called your Company and the representative on the phone was far more knowledgeable and serious. It turns out, yes, an M7/M9 bayonet will fit perfectly over this muzzle device.
What's the buffer and spring setup? I normally run an H2/3 and a Sprinco white I for carbines and pistols.
We used an H2 and a Sprinco RED in this build. We have a longer video on the topic that shows a has a bit more information. kzread.info/dash/bejne/k45rysqpZ9vNaJs.html.
I'm doing that exact same rifle now with y'alls components and fuck being cLoNe correct. 😅
The retro builds are really fun to shoot even if they are not 100% accurate museum quality replicas. Thanks for watching and commenting!
Oh I know and at the end of the day the people who bitch and moan about parts not being correct deserve to be mocked. I got an unassembled A2 from y'all before the assembled version was available to do an XM style build.
Nice! The rear sights have been tough to get but were finally getting them in so we should have those available individually soon, along with all lengths of round A2 handguards. If you wanted, you could possibly reach out to our returns team, and they may be able to get you store credit if you return the unassembled A2(if its still in new condition) and you could order an assembled version(with slightly more cost obviously). It would save you the headache of rear sight assembly installation and save you a little money compared to buying the parts individually.
@Darkness_Actual We got sights now, shoot us an email and they will get you taken care of.
@@b.kingsfirearms8760wasn't expecting that but sounds good. Should the email be in reference to a stand alone sight assembly?