Пікірлер

• 
  @PatrickEArchuleta-fs8bv18 күн бұрын

  Plus they want a bundle of money for there tools.bottom line.

• 
  @J.P.L.A.vonRunge18 күн бұрын

  Survivaltools only for Rich guys😂🎉

• 
  @PatrickEArchuleta-fs8bv18 күн бұрын

  I've been looking for a measuring tape for seven years Makita is weak as far as keeping up with the competition all I need is a tape not these new bulky tapes they heavier then my tool bags.

• 
  @phillcom3Ай бұрын

  the framing square,,, lets use a lambo to go down the road...

• 
  @ranjitsian5481Ай бұрын

  Nice tools 👍

• 
  @velvetvideoАй бұрын

  I'm quite angry over the fact that i'd love one of these but lawmakers seem to hate that idea...I guess they can't milk us for enough taxes that way. Quad ebikes and trikes aren't even allowed on the road here. Society needs to adapt and change. Not everyone needs or wants an automobile and all the expense that entails. There is no infrastructure for pedestrains or cycles to get around at all locally...though Amsterdam was able to do it in under 10 years. I think every city planner in the country should be forced to watch "Stroads" by Not Just Bikes.

• 
  @MasterEiji3 ай бұрын

  that Rat Racer..... reminds me of a lighter version of the TWIKE from Germany... similar operation....

• 
  @ben79323 ай бұрын

  That pipe threading tool is only saving you an elbow and I've never seen a steel pipe fall apart that easily

• 
  @nth74853 ай бұрын

  Jeez, that narrator voice...

• 
  @W.T.F.774 ай бұрын

  Však aspoň niečo je another level 😂😂😂Technický spiders nie😂😂😂kuki kuk www😂😂😂

• 
  @bobmuir54624 ай бұрын

  I won’t sub, like etc until you stop showing ads I cannot follow Wolfcraft…….sort it out! Bob England

• 
  @user-hk7kh8ju3n4 ай бұрын

  11:57Vinegar and this brush will take off the stain without any trouble.. Nice.

• 
  @Rvalle32ify5 ай бұрын

  I like the wheel barrel looks awesome

• 
  @josephshealey5 ай бұрын

  I've never once chamfered pvc. I've done probably a few thousand Glue joints. Never had a problem

• 
  @josephshealey5 ай бұрын

  How is tubing cutters new tech?

• 
  @emigdiomarrocha35656 ай бұрын

  Gracias por compartir, un abrazo fuerte de Veracruz México

• 
  @hectordanielcruzflores55366 ай бұрын

  Deberían de poner donde comprarlos por mercado libre

• 
  @michaeloliver35076 ай бұрын

  WOW! - EVERY ROUTER IMAGES SHOWS YOU ROUTING IN THE "WRONG" DIRECTION!!! - YOU ARE "PLOW" CUTTING WHICH IS BAD FOR THE ROUTER & BIT" - SOMETIMES FOLLOWS THE GRAIN AND SHOOT OUT AWAT FROM THE FENCE - THE ROTATION OF THE BIT SHOULD ALWAY BE INTO THE THE FENCE - THE SIMPLE RULE IS " COUNTERCLOCKWISE ON THE OUTSIDE AND CLOCKWISE ON THE INSIDE - VERY POOR SAFETY PRACTICE - YOU DID ALL THE WRONG CUTS!!!

• 
  @williamreaves74866 ай бұрын

  We can't do flared fittings in Kansas City

• 
  @michaeloliver35076 ай бұрын

  DRAFTING/CABINETMAKING TEACHER FOR 45 YEARS AND I SEE A COUPLE OF ERROR'S: NEVER DRAW ON THE BOTTOM OR INSIDE OFF A TRYSQUARE!

• 
  @briankleinschmidt36646 ай бұрын

  Easier? Connecting my hand level to the internet will not make my life easier. Now I have to monitor its activity.

• 
  @tanajirokade86707 ай бұрын

  Kimat kiti

• 
  @jamalama55487 ай бұрын

  Absolutely nothing that I would want. Especially at the price they are charging.

• 
  @bhupendravishwakarma35247 ай бұрын

  Hi

• 
  @kevinohara86718 ай бұрын

  Iv manufactured my evolution stand by turning the roller upside down put a square piece of wood into it then put a 6x2 on it then connect the other end to the chop saw and that'll be the new work bed you can make this 6x2 3m or more

• 
  @redpine86658 ай бұрын

  Swadging? I thought it was 'swedging'

• 
  @roberttorres68598 ай бұрын

  I don’t know about cutting that pex ring off looks like he nicked the barbs

• 
  @Rossvegasnevada7 ай бұрын

  I saw that too 😬

• 
  @josephshealey5 ай бұрын

  I saw that too. Sure to leak

• 
  @oscarkings82868 ай бұрын

  Como siempre excelentes videos..no se porqué no había visto este en especifico hoy agosto 2023... Saludos cordiales desde Chile 🇨🇱

• 
  @hanneliediedericks30258 ай бұрын

  I bought a large white trunk to store my infant niece’s stuff in kzread.infoUgkxNuLbiXpLQ-mKH5NlyjrNe88hiCk2N3Cg , as she comes to my house frequently. For now, it’s toys on one side and diapers, wipes, and other baby care items on the other. As she gets older, it will be all toys. I had originally wanted a trunk with a hinged lid, but I was afraid of her smashing or pinching her fingers in it. This will be a much safer option. The lid has great padding in it and it is actually nice to sit on. It feels very sturdy and secure. Looks like it can be wiped clean easily. If it gets abused by her, I won’t be terribly upset because I paid less than $50 for it on Prime Day.

• 
  @tonylawrence91578 ай бұрын

  Turned this off. If you do not know the trade, this fancy gadgetry cannot help you.

• 
  @SuperBill688 ай бұрын

  This press has worked like a charm for my projects kzread.infoUgkxajoEbapTfqWaadnqb04h6U576yxXp-FE . I didn't even secure it to my table top, mainly due to the fact that I was using a 15 lbs drill vise. It's not flimsy at all as to what others have claimed it to be. Make sure the locking nuts and levers are secured and there won't be any issues with light pressure and patience. I was able to drill through aluminum, plastic, and steel (steel took a while) with no problems at all. Yeah it took a little longer than a regular drill press, but I don't have the space OR the money for one.The instruction manual was worthless, but luckily assembling the press was intuitive. However, the manual would be good for ordering replacement parts if needed. There is a nice breakdown of the parts that are included in the kit. Before ordering, make sure it is compatible with your unit, it is clearly stated what models the press is compatible with.This was an excellent purchase for $40!!

• 
  @derekwalsh45837 ай бұрын

  As an electrician that does strictly remodels this is an absolute essential tool. kzread.infoUgkx0vyBwjtx9GGOuiqUVT2sRoYqmDoNT_RI Being able to precision cut any material with a light weight tool is priceless.I upgraded to this Dewalt 20v from a competitor's 12v. The Dewalt 20v is just as light as the competitor's 12v. I am extremely pleased with the overall performance and battery life of this tool. As far as oscillators go, they just aren't very ergonomic tools. The dewalt oscillators have an offset handle that do make them somewhat more ergonomic than the competitors' oscillators.

• 
  @PatrickEArchuleta-fs8bv18 күн бұрын

  DeWalt sucks my apologies but everything tool wise from DeWalt I've had nothing but bad luck I'm guessing,God bless Makita for me is ahead of the rest.

• 
  @mounirturki71069 ай бұрын

  Good morning. First, I work as a carpenter, and I want a lathe like it. It is small and perfect. How much does it cost? I would like to buy it

• 
  @peterhvidholm3639 ай бұрын

  I USE BOSH

• 
  @grantwriter77779 ай бұрын

  This might be informative but the annoying "Ad" voice, and musak makes it intolerable.

• 
  @steven.h062910 ай бұрын

  One Year Warranty is ridiculous for hand tools.. 😬

• 
  @sarathjayathissa401510 ай бұрын

  Sri Lanka

• 
  @ThisTall10 ай бұрын

  I like the clamp track too, but the reason people don’t do that is because you can’t cut on it with a tracksaw without destroying it.

• 
  @pauljamilkowski367210 ай бұрын

  Can anyone attest as to if that flaring drill attachment works well?

• 
  @mick1gallagher10 ай бұрын

  This is useless junk readings disappeared after two week

• 
  @oscarkings828611 ай бұрын

  Excelente presentación como siempre 👌. Saludos cordiales desde Chile 🇨🇱

• 
  @lanfearsdragon88011 ай бұрын

  😂😂😂 why does Rockler videos look like they were made 10+ years ago.

• 
  @oscarkings828611 ай бұрын

  Maravilloso compendio de herramientas. Felicitaciones. Saludos cordiales desde Chile 🇨🇱

• 
  @oscarkings828611 ай бұрын

  Genial presentación como siempre

• 
  @user-gt4oz2mz3f11 ай бұрын

  這麼多好工具 何時才能進口中國普及呢

• 
  @Gungho1a11 ай бұрын

  NIce lineup. The Ozi. drill bit sharpener is solid and does work surprisingly well on non-specialist drill bits (not masonry bits, etc). It's saved me it's purchase price three or four times over in a couple of years.

• 
  @bobpiec11 ай бұрын

  Sure wish You would tell us where these tools are made! I am sick and tired of crap made in the ccp (china)

• 
  @brunokempter518611 ай бұрын

  Sehr schön+ leicht gebaut! Wenn etwas jünger,wäre gut für mich!!😂

• 
  @MASI_forging11 ай бұрын

  Great video man 👏👏

• 
  @hswing1111 ай бұрын

  the vacuum ad was terrible piss poor everything P O S