How are your thoughts so far on this oil? Is the diff working properly ? I am in beetween it and the motul 300
@vellafiretv21735 ай бұрын
Did I see correctly, 300,000 miles? Is this an auto trans (CVT). My 09 Patriot is going strong - 130,000 mi. Came here for the intake runner cleaning. How did that work out in the long run? Thanks for a great video.
@phillippardo57126 ай бұрын
Interesting I see that doesn't appear to be the correct coolant. My 2010 takes the link HOAT stuff. I heard you can use others but wasn't sure.
@phillippardo57126 ай бұрын
Wow a jeep compass with over 300k I've never heard of such a thing. Congratulations! I wonder if it cost a lot to maintain it to last that long.
@andrez19797 ай бұрын
Great Video i'm having that same problem on a 2008 Jeep Compass. sorry but had to lowered the volume all the way down..the music is kida gay lol
@latunguley9 ай бұрын
No sound
@marcelolucchetti44079 ай бұрын
Ma è valida anche per MY19 1.3 benzina ?
@RaphyRandom10 ай бұрын
Hi where did you get the bulb holder housing ?
@gbarriah11 ай бұрын
Thank you very much for your good video. I wanted to take advantage of asking you about the complete change of the entire tail light to the new facelift light with Leds. Do you know if it will be necessary to install the resistors?? And if necessary, would the resistors have to be installed in the same wires that you confirmed in the video?? or it should be install more resistors??
@betooavila1 Жыл бұрын
😂😂😂😂.OMG...you forgot to put grease on it
@javiercoronel11695 ай бұрын
Not those
@KattGamezz Жыл бұрын
You keep saving my life with these videos! Thank youuu
@buildingconsultants1854 Жыл бұрын
Didnt show anything......?????
@MikeM-of2if Жыл бұрын
I am curious, did it work? how long did it last for ? Thank you for the video!
@phillippardo5712 Жыл бұрын
Great job taking care of your engine. And thank you for the video. I have oil that puddles in my intake when I take off my throttle body. Do you know what could be causing this? I tried changing pcv valve but did not help.
@Yeahpaman11 ай бұрын
Oil pressure sensor
@phillippardo571211 ай бұрын
@@Yeahpaman I have no lights on dash
@strengthfortoday6 ай бұрын
Did you ever figure out what that was? Causing the puddles of oil behind the throttle body?! I am experiencing the same thing. Thanks in advance.
@cydneybowen5179 Жыл бұрын
Is there volume??
@kylemorgan6325 Жыл бұрын
What’s size is the bolts ?
@ThinkTechnikk2 жыл бұрын
👌👌👌👌👌👌
@MidianRenovatio2 жыл бұрын
Can you make a video for the Fiat 500X, replacing the halogen headlight to the new version Full Led Headlight of the 500X? Thanks
@AudreeRose2 жыл бұрын
What is the tool you used to get the new fluid inside? Also where can I buy it? :)
@mainsfortes57782 жыл бұрын
You dan use a small fluid transfer pump you can buy from walmart. In my case I used it to pump air into a pastic container which contained the fluid. The fluid did not touch my pump at all. Air goes in the bottle and the fluid is forced out via the tube to the filler hole of the diff. Either way, you can use the pump to transfer the fluid. I chose my method because I use the same pump to service my cooling system which by the way I will make a video soon (as the weather permits)
@AudreeRose2 жыл бұрын
@@mainsfortes5778 awesome thank you so much for getting back to me! Can’t wait for the new video 🙂
@OggyGTA3 жыл бұрын
Correct procedure is to drain / fill with the car on the level. Also to let the oil run out a little so you know when you've reached the correct level.
@mainsfortes57782 жыл бұрын
The diff was filled according to the factory recommended volume so it was very accurate.
@lastmanxa2 жыл бұрын
their is a procedure in the manual to check fluid level
Пікірлер
How are your thoughts so far on this oil? Is the diff working properly ? I am in beetween it and the motul 300
Did I see correctly, 300,000 miles? Is this an auto trans (CVT). My 09 Patriot is going strong - 130,000 mi. Came here for the intake runner cleaning. How did that work out in the long run? Thanks for a great video.
Interesting I see that doesn't appear to be the correct coolant. My 2010 takes the link HOAT stuff. I heard you can use others but wasn't sure.
Wow a jeep compass with over 300k I've never heard of such a thing. Congratulations! I wonder if it cost a lot to maintain it to last that long.
Great Video i'm having that same problem on a 2008 Jeep Compass. sorry but had to lowered the volume all the way down..the music is kida gay lol
No sound
Ma è valida anche per MY19 1.3 benzina ?
Hi where did you get the bulb holder housing ?
Thank you very much for your good video. I wanted to take advantage of asking you about the complete change of the entire tail light to the new facelift light with Leds. Do you know if it will be necessary to install the resistors?? And if necessary, would the resistors have to be installed in the same wires that you confirmed in the video?? or it should be install more resistors??
😂😂😂😂.OMG...you forgot to put grease on it
Not those
You keep saving my life with these videos! Thank youuu
Didnt show anything......?????
I am curious, did it work? how long did it last for ? Thank you for the video!
Great job taking care of your engine. And thank you for the video. I have oil that puddles in my intake when I take off my throttle body. Do you know what could be causing this? I tried changing pcv valve but did not help.
Oil pressure sensor
@@Yeahpaman I have no lights on dash
Did you ever figure out what that was? Causing the puddles of oil behind the throttle body?! I am experiencing the same thing. Thanks in advance.
Is there volume??
What’s size is the bolts ?
👌👌👌👌👌👌
Can you make a video for the Fiat 500X, replacing the halogen headlight to the new version Full Led Headlight of the 500X? Thanks
What is the tool you used to get the new fluid inside? Also where can I buy it? :)
You dan use a small fluid transfer pump you can buy from walmart. In my case I used it to pump air into a pastic container which contained the fluid. The fluid did not touch my pump at all. Air goes in the bottle and the fluid is forced out via the tube to the filler hole of the diff. Either way, you can use the pump to transfer the fluid. I chose my method because I use the same pump to service my cooling system which by the way I will make a video soon (as the weather permits)
@@mainsfortes5778 awesome thank you so much for getting back to me! Can’t wait for the new video 🙂
Correct procedure is to drain / fill with the car on the level. Also to let the oil run out a little so you know when you've reached the correct level.
The diff was filled according to the factory recommended volume so it was very accurate.
their is a procedure in the manual to check fluid level