Пікірлер

• 
  @Lost10mm.3 күн бұрын

  Really dig the catch can look wonder if it's really as effective as the bottom of the pan.

• 
  @steveattard502914 күн бұрын

  Awesome work,. Do you purge with argon when welding the housing? What filler rods do you use?

• 
  @thegillfamily870415 күн бұрын

  I knk5w this is an old video. Thank you for doing this.... Did everything come out alright ? Or did yiu do anything else before installing this diff with the TRD LSD? The reason i ask is because i have to go from 4.08 to 3.26, and my 4.08 has the cusco lsd in it already, basically want to tranafer the lsd in the 3.26. thanks again for the info! Cheers. I

• 
  @steveattard502915 күн бұрын

  Hi mate, sorry to bring up an old video. But what you have done is what I'm intending to do on my build and this has been the best description I have found. Did you purge the inside of the housing when you were welding on the pipe for the wastegate

• 
  @paufishing378216 күн бұрын

  Just found your channel. you do some quality work man!

• 
  @eugenepetty330124 күн бұрын

  Were are you from buddy i have a 85 ss monte with twin 67mm turbos from fis i need some turbo piping hot and cold side done and mount inner cooler

• 
  @chakradjuzeus9275Ай бұрын

  6:45 beautiful welds bro 😎

• 
  @speedaddixxgarage8278Ай бұрын

  Thanks homie!

• 
  @xdemonx949Ай бұрын

  What ecu and engine harness are you using

• 
  @speedaddixxgarage8278Ай бұрын

  Not sure. I didn't work on the harness. ECU is K pro im sure

• 
  @juanalonso9565Ай бұрын

  Im late to the party but your killin in bro!

• 
  @speedaddixxgarage8278Ай бұрын

  Thanks dude!

• 
  @juanalonso9565Ай бұрын

  Looking good bro

• 
  @speedaddixxgarage8278Ай бұрын

  Appreciate it

• 
  @DaytonJames-yz9idАй бұрын

  Where are you located ? I have this same 7th gen accord and would love one of these custom turbo manifold

• 
  @speedaddixxgarage8278Ай бұрын

  Raleigh, NC I did not build the kit but I can build you a kit. Contact me for pricing

• 
  @JS0143Күн бұрын

  @@speedaddixxgarage8278how can i contact you

• 
  @the405showАй бұрын

  Fucking amazing... I wanna do this to my 05 accord v6 j30a4 sedan. Where did u relocate the battery.????

• 
  @speedaddixxgarage8278Ай бұрын

  I'm sure its in the trunk. Thats where most relocation battery kits go

• 
  @JonTostanoskiАй бұрын

  "And he back" Lol

• 
  @speedaddixxgarage8278Ай бұрын

  yup

• 
  @swkosmo6124Ай бұрын

  weight?

• 
  @speedaddixxgarage8278Ай бұрын

  IG@ Timbo1797

• 
  @lukethompson79702 ай бұрын

  Just when I am planning to relocate mine in my 1g, thanks bro

• 
  @speedaddixxgarage8278Ай бұрын

  Any time

• 
  @crdotson19152 ай бұрын

  this video helped my just buy seeing how the internals worked. was able to drill out the lock and pull out the coonecting rod that was left behind and taped a screw driver to it . basically made a 24 in "key". then i stuffed a little piece of scrap wood in the mech to make it stay unlocked. thanks!!!!!

• 
  @speedaddixxgarage8278Ай бұрын

  I knew at least one person would benefit. Glad ur back working

• 
  @michaelscott53822 ай бұрын

  Just fixed mine using your video as guide. Thank you, sir.

• 
  @speedaddixxgarage8278Ай бұрын

  Glad it helped

• 
  @lorenzosmith96002 ай бұрын

  Good work, bro

• 
  @speedaddixxgarage8278Ай бұрын

  Thanks 🔥

• 
  @MarkAnthony-rb7fp2 ай бұрын

  Awesome fabrication work, not much love is shown to these j-series accords. 🤘

• 
  @speedaddixxgarage82782 ай бұрын

  Agreed. Not sure but this was the result of the 1st NSX engine...U would think people would invest in the J and not the K

• 
  @jackpolej63353 ай бұрын

  Hey what is the width of spoiler >?

• 
  @speedaddixxgarage82783 ай бұрын

  If i remember when i get home , ill get u a measurement.

• 
  @Jseriesbryan3 ай бұрын

  Very nice! I plan on doing the same to my next chassis this upcoming summer but j2k will be my setup.

• 
  @speedaddixxgarage82783 ай бұрын

  Im thinking about dropping a J in the rear of my EK...What u think??

• 
  @Jseriesbryan3 ай бұрын

  @@speedaddixxgarage8278 that will be a very nice build, I believe there’s a del sol with a j in the front & one in the rear lol two j swaps in it & there’s a integra with a j in the rear & that thing boogies!! Would love to watch you document yours!! Keep up the fire videos.

• 
  @dragonfalcon84743 ай бұрын

  I just bought one of these today. But when I got home the key was not in the toolbox anywhere. I contacted Home Depot see if they can find it or replace it. Super annoying, ha. A video idea, how do you remove and replace the toolbox lock?

• 
  @insomniac2603 ай бұрын

  Literally in the same boat. Was gifted a box at work and no key lol

• 
  @NANDO3IS3 ай бұрын

  Amazing video. Question I want to buy a 326 usa, but it is ridiculously expensive. How is the replica? Are you happy with the buy? Do you recommend this replica spoiler over the original 326? Thanks!

• 
  @Tpitgr4 ай бұрын

  Addixx what is a good site I can buy the crv diff and front transfer cause I’m not finding it on google at all and OfferUp n marketplace are also dead

• 
  @MW-uy3np4 ай бұрын

  Has this car sold yet?

• 
  @speedaddixxgarage82783 ай бұрын

  Yeah, surprisingly the car sold approximately 2 weeks after being posted.

• 
  @byronrichards71464 ай бұрын

  what differential ratio are you using

• 
  @speedaddixxgarage82784 ай бұрын

  Auto gear ratio

• 
  @mfbrayan65324 ай бұрын

  did the battery have to be relocated and where because i have the same accord but the battery is in the engine bay where you put the turbo.

• 
  @speedaddixxgarage82784 ай бұрын

  Yes, the battery is located in the trunk. Pretty common on a lot of cars with aftermarket turbos

• 
  @mfbrayan65324 ай бұрын

  @@speedaddixxgarage8278 thought so just wanted to make sure thx

• 
  @easymoneyrace98274 ай бұрын

  Nice video bro💪🏼

• 
  @speedaddixxgarage82784 ай бұрын

  Appreciate it

• 
  @kkbodyshop5 ай бұрын

  Man that's bad ass !!!!!. Glad I found your channel today and subscribe

• 
  @speedaddixxgarage82784 ай бұрын

  Preciate u

• 
  @TW0TIRES5 ай бұрын

  Maybe some nylon washers would be a good addition.

• 
  @speedaddixxgarage82784 ай бұрын

  good idea

• 
  @FrankGetz-qi9qf5 ай бұрын

  You are artists. Nice job with that Turbo install.

• 
  @speedaddixxgarage82784 ай бұрын

  Thanks homie

• 
  @davidmiddlebrooks85285 ай бұрын

  bro must have been trained in the middle east working in the sandals/slides lol. im looking to get this setup on my 87 ss

• 
  @rjstyles91775 ай бұрын

  Nice work man, Was looking a those HD clamps. How have they held up so far? Any leaks?

• 
  @speedaddixxgarage82785 ай бұрын

  No problems so far. Holding 30+ psi actually closer to 40psi

• 
  @NotoriousZNT5 ай бұрын

  Absolutely killed the fab work. Good stuff man

• 
  @speedaddixxgarage82785 ай бұрын

  Thanks Homie. I try and do my thing

• 
  @guillermo34716 ай бұрын

  Yo fam, where'd you get those welding slides!? They look comfy as hell!😂 good shit my man. You do great work . Keep it up!👍

• 
  @speedaddixxgarage82785 ай бұрын

  Self taught. I watched a ton of videos and jumped right into it. Practice, Practice and alot of confidence. Thanks for stopping by homie!!

• 
  @kanenaysmith92876 ай бұрын

  what did you expect for $32 lol. Pay cheap get cheap

• 
  @speedaddixxgarage82785 ай бұрын

  Right

• 
  @StewartMotoring6 ай бұрын

  Good vid. Lmao when you tripped on a vice

• 
  @speedaddixxgarage82785 ай бұрын

  It wasn/t planned...I promise lol

• 
  @Bted__ever6 ай бұрын

  I like how that turned out, car sounded really good as well. What did it make for power?

• 
  @speedaddixxgarage82786 ай бұрын

  check out: instagram.com/_k_rolls_turbo_/

• 
  @thereal15056 ай бұрын

  Bro ..your video is ,I think the only 1 with full and great info running a 4l80e

• 
  @speedaddixxgarage82786 ай бұрын

  yah ill be making another one soon going over what all i did

• 
  @LeNzBro6 ай бұрын

  gang shit

• 
  @speedaddixxgarage82786 ай бұрын

  taking over

• 
  @MrYz250fman6 ай бұрын

  Great video

• 
  @MrYz250fman6 ай бұрын

  Cool video

• 
  @GS_Twan6 ай бұрын

  How did your boy like those diff bushings? I’m currently running the v1 of those mounts, so many people have split the figs. Im swapping to the serial nine diff bushings.

• 
  @speedaddixxgarage82786 ай бұрын

  No complaints so far. They where easy to install

• 
  @dirkdig36286 ай бұрын

  Good work but you could have saved time and some money by not putting the resonator so far back and removing that brace., should have put the resonator where the factory cat goes and not used that bellow. The header being a two piece would give the flex.

• 
  @speedaddixxgarage82786 ай бұрын

  Thanks

• 
  @DJones-xf7gw7 ай бұрын

  I know this was 2 years ago and you probably figured this out, but you need to click on WOT shift and adjust it there. It doesn’t use those tables at WOT. It shifts at whatever rpm you have it set to.

• 
  @speedaddixxgarage82787 ай бұрын

  Preciate the Advice.. Problem was the Transmission was slipping. I ended up getting the trans rebuilt, installed a Complete billet valve body from Extreme Automatics and now I have a solid 200psi at all time. Car has never felt better.

• 
  @jacobw36527 ай бұрын

  That's an admirable effort you are putting in. But in my decade long experience, the RX8 is not a Honda. And I mean it's really not. It's difficult to get these cars to cooperate when they don't want to, and they do have problems. I've invested 20k into mine, and it's still not quite how I would like it. But yes, as you mentioned, they are some of the best handling/running cars on the road. They are known to eat coil packs, a company called Black Halo Racing sells good replacements, but not for cheap. If you are saying it's misfiring, does the check engine light flash when it does? Do you still have any stored codes? If the OMP is not functioning correctly, it will go in "limp mode" which may be the cause. Also keep in mind, until the engine is warmed up, it won't let you rev it up past a certain RPM, I think around 6k RPM is where it will cut out. Also, check the throttle body for free play and make sure the MAF is clean. Can also clean and test the eccentric shaft sensor, and do the "20 brake pedal stomp" reset. And I'm not entirely sure what happened with that intake, but the factory RX8 intake is actually quite good. There's no need to change it if you have a complete one.

• 
  @speedaddixxgarage82787 ай бұрын

  Preciate your lengthy knowledge. I actually already fixed it and figured out all the issues.....just havnt made the video yet. But I will say one of the things u mentioned did fix it. you will see in the next episode. Thanks for stopping by

• 
  @jacobw36527 ай бұрын

  @@speedaddixxgarage8278 I look forward to seeing the video, glad you got it running right.

• 
  @KiterTMK7 ай бұрын

  Put the stock air filter and intake back. Aftermarket intakes do nothing and make it run like crap.

• 
  @speedaddixxgarage82787 ай бұрын

  Your right

• 
  @KiterTMK7 ай бұрын

  @speedaddixxgarage8278 I know I'm right, everyone has found out the hard way in the past two decades.

• 
  @marcm45707 ай бұрын

  I know what's wrong with it. It needs an LS1

• 
  @speedaddixxgarage82787 ай бұрын

  Stop. Im not gonna LS this one. K doe......????

• 
  @TW0TIRES7 ай бұрын

  Did that thing live up north for a while or something?

• 
  @speedaddixxgarage82787 ай бұрын

  good question...I have no clue but it was removed from a dudes yard that lived on a dirt road....

• 
  @nitomeanboyGBODY7 ай бұрын

  Would u happen to have a link to the plastic material u used as a mounting surface for the 3 inch touchscreen and gauges… great work by the way!! U deff got him back in the game!

• 
  @speedaddixxgarage82787 ай бұрын

  He grabbed it local to us. There is a guy in Raleigh off New Bern Ave that sells the stuff.