I just bought the 4400 and it keeps telling me to fill the water tank when it’s full. If I kinda slam it into the back it goes away. That plus the watery coffee is not a good day one.
@authorpatrickalain3 ай бұрын
Man, how difficult is it to clean? How frequently must you clean.
@anthonkitty15093 ай бұрын
It's not too bad. I wash the grounds contianer and drip tray once a week. Then I rinse the brew unit once a month and let it dry. Do a deep cleaning every ~6 months which takes about 30 minutes.
@LiverPools-ib5fv5 ай бұрын
They are poor. The steamer only allows the milk to be like warm. I cant do luke warm coffee. Its meant to be a hot beverage. Not to mention the fact it cannot deal with oat or coconut milk. Its a really poor machine. Do not get anything with built steamers or bean grinders
@anthonkitty15095 ай бұрын
Luckily, we haven't had that issue, although we have it set to the hottest temperature. Oat milk wasn't great, but most brands of almond milk foam just fine (Wegman's seems to foam the most similar to normal milk).
@faridalghali524610 ай бұрын
Fantastic EV!🤩
@xXNeeleshXx10 ай бұрын
beautiful car 👍
@henrikhook.11 ай бұрын
Small darkening of the rear lights 🤔 ...would be👍🏼👌🏼😉😎
@Swanson1011 ай бұрын
Very cool and sleek!
@TJ-po9ol11 ай бұрын
Noice!
@imfoad7657 Жыл бұрын
This was supper weak for me lucky watch your video and now have to go find different brand or type 😊
@Digging-life Жыл бұрын
Is the coffee actually hot ? As I had a delonghi version of this and sent it back as was only warm..
@anthonkitty1509 Жыл бұрын
Yes, it has different settings for how hot you want it. I turned it up to the maximum and haven't had any issues.
@ashmigosh6860 Жыл бұрын
Have any of you that own this machine found that it produced less of a drink than it should? Ex. Making the latte should give me ~11oz drink but this will only make 6 oz?
@anthonkitty1509 Жыл бұрын
The only time I've encountered something similar was when I used certain brands of oat/almond/coconut milk. It seems some of the milk alternatives don't flow through the frother very well. If you just use normal milk, then I'm not sure!
@sherifkarama96536 ай бұрын
Apparently this may also be due to the o-rings inside the machine snapping, they can easily be replaced however!
@liewpg2266 Жыл бұрын
How do you make latte? I don't see latte button here
@anthonkitty1509 Жыл бұрын
Philips calls it "latte macchiato". It's a bit hard to see in my video
@AlfonsoHerrera-ik3gb Жыл бұрын
Hi! I’ve been having issues with the amount of coffee being grinded per serving, coffee comes out too light. Any suggestions?
@anthonkitty1509 Жыл бұрын
How many cups have you brewed? Is it a new machine?
@AlfonsoHerrera-ik3gb Жыл бұрын
@@anthonkitty1509 new machine and I’ve done around 10-15 coffee cups
@anthonkitty1509 Жыл бұрын
@@AlfonsoHerrera-ik3gb gotcha. I believe it took 25-40 cups for mine to really work well. Some people on Reddit/Amazon reviews had the issue up to ~75 cups, so it may just need some break-in. I use Lavazza Super Crema beans and get a good solid puck and dark espresso using the default strength setting and default grinder setting.
@SugarFiveZero Жыл бұрын
Where's the follow-up review video... along with a cleaning and maintenance video?
@anthonkitty1509 Жыл бұрын
Philips made a better video than I ever could on the cleaning process kzread.info/dash/bejne/iKuYz8qbkZXKprQ.html
@ironKurgan Жыл бұрын
We bought the 4300 last week, and after the break in of about 29 cups or so, It is now making barista level caps and latte's along with pro grade shots. This thing is incredible. We are still tweaking the settings for aroma, size and foam/hot milk level, but as it is, it gives a pro grade cup of coffee.
@anthonkitty1509 Жыл бұрын
We love it! It's paid for itself 3x already. We recently did a deep clean of the brew group and re-greased it and the quality is still just as good after 700+ cups of coffee
@ironKurgan Жыл бұрын
@@anthonkitty1509 We noticed a huge difference in smoothness after about 100 cups, when we turned the grind down to level 2, The pucks are now dry and the smoothness has gone up and bitterness down, Perfect !
@calumdonnachie19458 ай бұрын
Contemplating this machine. Have your run oatmilk through it? Does it foam well?
@sunithanilamani1420 Жыл бұрын
Were I buy
@anthonkitty1509 Жыл бұрын
It's available on Amazon in the US right now and a few other stores
@annalewis853 Жыл бұрын
I know this is a year old but I counted a less than 10 second espresso time? Did it get better?
@anthonkitty1509 Жыл бұрын
Yes, I changed the 'strength' settings and it is much stronger now. Haven't timed it but seems roughly 20-30 seconds now
@john-ze7eu2 жыл бұрын
$1,000 hot milk maker.. Lol
@anthonkitty15092 жыл бұрын
In that case you not only watched a video of a $1,000 hot milk maker, but took the time to also comment on it. I'm intrigued.
@john-ze7eu2 жыл бұрын
@@anthonkitty1509 thank God it was short.
@anthonkitty15092 жыл бұрын
@@john-ze7eu not the first time I've heard that
@john-ze7eu2 жыл бұрын
@@anthonkitty1509 I'm just messing with ya. I've been looking at buying the 4300 or 5000 model... Trying to convince myself it's worth it. I guess if it lasts for at least 2 years id be money ahead...
@anthonkitty15092 жыл бұрын
@@john-ze7eu I'm about 500 coffees in with no issues so far. If you rinse the brew unit every week and do the suggested cleaning cadence it should be fine
@Drdry82 жыл бұрын
Hi, from where did you buy it? Is out of stock everywhere.
@anthonkitty15092 жыл бұрын
I bought mine on Amazon. Looks like it's available now, they usually restock every couple weeks there.
@jaysonj31222 жыл бұрын
Have you run into any problems with the machine?. I'm thinking of buying in Australia. Thanks for the video.
@anthonkitty15092 жыл бұрын
I haven't had any issues! It takes ~25 brews to reach full strength and remember to rinse out the brew group each week. Also, dont used flavored/Starbucks beans as the oil from the beans can ruin the machine. Philips has a few videos on maintenance that are really helpful.
@H-RutherfordHill2 жыл бұрын
Coffee extraction looks very weak.
@anthonkitty15092 жыл бұрын
Takes about 20 brews to get to full strength. Philips is very upfront about this and gives guidance in the manual. This video was one of the first brews as I said in the description.
@H-RutherfordHill2 жыл бұрын
@@anthonkitty1509 How is it doing now? Strength pretty good?
@anthonkitty15092 жыл бұрын
@@H-RutherfordHill yes, it's much better now. The machine lets you change the grinder settings and control the amount of liquid. Prob not as good as a traditional manual espresso machine but the ease of use is a sufficient trade-off.
@siiNke2 жыл бұрын
@@anthonkitty1509 Any reason why you did not buy Jura? Could you make video how do you clean device?
@anthonkitty15092 жыл бұрын
@@siiNke I chose the Philips for a few reasons: 1- price was much cheaper on Amazon than the Jura models (if you want one that froths milk, Jura is 2-3k vs 700-900 for this model) 2- Philips LatteGo system is superior for milk froth and much easier to clean (no tubes) 3- Philips has more drink choices (I believe this one has 8 different coffees it can make) and you can easily customize the different settings to your preferences I may do a video in the future on the cleaning process. Philips made it very simple and the machine itself provides instructions on the screen.
@mitsuracer872 жыл бұрын
I usually turn everything up to max with my lattes. I'm using Lavazza Super Crema
@benjmineaton952 жыл бұрын
We bought the same coffee pot and stayed at the same hotel in Hawaii. You have great taste...LOL
Пікірлер
I just bought the 4400 and it keeps telling me to fill the water tank when it’s full. If I kinda slam it into the back it goes away. That plus the watery coffee is not a good day one.
Man, how difficult is it to clean? How frequently must you clean.
It's not too bad. I wash the grounds contianer and drip tray once a week. Then I rinse the brew unit once a month and let it dry. Do a deep cleaning every ~6 months which takes about 30 minutes.
They are poor. The steamer only allows the milk to be like warm. I cant do luke warm coffee. Its meant to be a hot beverage. Not to mention the fact it cannot deal with oat or coconut milk. Its a really poor machine. Do not get anything with built steamers or bean grinders
Luckily, we haven't had that issue, although we have it set to the hottest temperature. Oat milk wasn't great, but most brands of almond milk foam just fine (Wegman's seems to foam the most similar to normal milk).
Fantastic EV!🤩
beautiful car 👍
Small darkening of the rear lights 🤔 ...would be👍🏼👌🏼😉😎
Very cool and sleek!
Noice!
This was supper weak for me lucky watch your video and now have to go find different brand or type 😊
Is the coffee actually hot ? As I had a delonghi version of this and sent it back as was only warm..
Yes, it has different settings for how hot you want it. I turned it up to the maximum and haven't had any issues.
Have any of you that own this machine found that it produced less of a drink than it should? Ex. Making the latte should give me ~11oz drink but this will only make 6 oz?
The only time I've encountered something similar was when I used certain brands of oat/almond/coconut milk. It seems some of the milk alternatives don't flow through the frother very well. If you just use normal milk, then I'm not sure!
Apparently this may also be due to the o-rings inside the machine snapping, they can easily be replaced however!
How do you make latte? I don't see latte button here
Philips calls it "latte macchiato". It's a bit hard to see in my video
Hi! I’ve been having issues with the amount of coffee being grinded per serving, coffee comes out too light. Any suggestions?
How many cups have you brewed? Is it a new machine?
@@anthonkitty1509 new machine and I’ve done around 10-15 coffee cups
@@AlfonsoHerrera-ik3gb gotcha. I believe it took 25-40 cups for mine to really work well. Some people on Reddit/Amazon reviews had the issue up to ~75 cups, so it may just need some break-in. I use Lavazza Super Crema beans and get a good solid puck and dark espresso using the default strength setting and default grinder setting.
Where's the follow-up review video... along with a cleaning and maintenance video?
Philips made a better video than I ever could on the cleaning process kzread.info/dash/bejne/iKuYz8qbkZXKprQ.html
We bought the 4300 last week, and after the break in of about 29 cups or so, It is now making barista level caps and latte's along with pro grade shots. This thing is incredible. We are still tweaking the settings for aroma, size and foam/hot milk level, but as it is, it gives a pro grade cup of coffee.
We love it! It's paid for itself 3x already. We recently did a deep clean of the brew group and re-greased it and the quality is still just as good after 700+ cups of coffee
@@anthonkitty1509 We noticed a huge difference in smoothness after about 100 cups, when we turned the grind down to level 2, The pucks are now dry and the smoothness has gone up and bitterness down, Perfect !
Contemplating this machine. Have your run oatmilk through it? Does it foam well?
Were I buy
It's available on Amazon in the US right now and a few other stores
I know this is a year old but I counted a less than 10 second espresso time? Did it get better?
Yes, I changed the 'strength' settings and it is much stronger now. Haven't timed it but seems roughly 20-30 seconds now
$1,000 hot milk maker.. Lol
In that case you not only watched a video of a $1,000 hot milk maker, but took the time to also comment on it. I'm intrigued.
@@anthonkitty1509 thank God it was short.
@@john-ze7eu not the first time I've heard that
@@anthonkitty1509 I'm just messing with ya. I've been looking at buying the 4300 or 5000 model... Trying to convince myself it's worth it. I guess if it lasts for at least 2 years id be money ahead...
@@john-ze7eu I'm about 500 coffees in with no issues so far. If you rinse the brew unit every week and do the suggested cleaning cadence it should be fine
Hi, from where did you buy it? Is out of stock everywhere.
I bought mine on Amazon. Looks like it's available now, they usually restock every couple weeks there.
Have you run into any problems with the machine?. I'm thinking of buying in Australia. Thanks for the video.
I haven't had any issues! It takes ~25 brews to reach full strength and remember to rinse out the brew group each week. Also, dont used flavored/Starbucks beans as the oil from the beans can ruin the machine. Philips has a few videos on maintenance that are really helpful.
Coffee extraction looks very weak.
Takes about 20 brews to get to full strength. Philips is very upfront about this and gives guidance in the manual. This video was one of the first brews as I said in the description.
@@anthonkitty1509 How is it doing now? Strength pretty good?
@@H-RutherfordHill yes, it's much better now. The machine lets you change the grinder settings and control the amount of liquid. Prob not as good as a traditional manual espresso machine but the ease of use is a sufficient trade-off.
@@anthonkitty1509 Any reason why you did not buy Jura? Could you make video how do you clean device?
@@siiNke I chose the Philips for a few reasons: 1- price was much cheaper on Amazon than the Jura models (if you want one that froths milk, Jura is 2-3k vs 700-900 for this model) 2- Philips LatteGo system is superior for milk froth and much easier to clean (no tubes) 3- Philips has more drink choices (I believe this one has 8 different coffees it can make) and you can easily customize the different settings to your preferences I may do a video in the future on the cleaning process. Philips made it very simple and the machine itself provides instructions on the screen.
I usually turn everything up to max with my lattes. I'm using Lavazza Super Crema
We bought the same coffee pot and stayed at the same hotel in Hawaii. You have great taste...LOL
Sweet!