Thanks, brother, I tried everything, and I ended up using your method with a small sink air plunger, and it fixed my old and newer machines. Nothing worked even straight CLR.
@dennisphillips9635 ай бұрын
So. Did the pack fit on the frame. Looked at your videos and did not see the final product.
@bigtimer17766 ай бұрын
Is it squeaky after awhile?
@b.mendiola25159 ай бұрын
My fuse was out. Thank you!!!!!!!
@chrisg194811 ай бұрын
Thanks for showing how to test for continuity. Let me know I had a bad switch.
@maragtaz3653 Жыл бұрын
Sir ..please make a video on how to attach the pack on the frame you made...good video learned a lot watching...thank you very much
@forisber Жыл бұрын
Nice job! What's the weight of the frame without the straps?
@moon_mint Жыл бұрын
Glad we're not the only one's in DFW with a hard water problem. Our coffee makers always get scaled up SO quickly.
@drmachinewerke1 Жыл бұрын
I use a 1/16 roll pin. And I polished the shield to allow caps to fall out
@glennaycock6090 Жыл бұрын
would have worked fine with the 24v head.
@rogermilholland5445 Жыл бұрын
Did u convert ur 24v to 36v 101 lbs?
@leeow3n Жыл бұрын
I heard you can cut off the bolt, and turn it the other way so it's sticking forward out of the way.
@gliderarts3573 Жыл бұрын
notch in hammer i see
@SwheatCents Жыл бұрын
I bet you could use electrical conduit might give er a build and check back
@justinfortney2016 Жыл бұрын
Where'd you get the new vents ? The dealer? They're over $100 each! I have broken luvers. Do you still have your old ones? I'd love to buy them!
@rogermilholland5445 Жыл бұрын
I bought one off ebay
@markmorrison84772 жыл бұрын
Whats the off set on your rims looks pretty big Im running 275/60r20's with minimal rubbing
@MrColtnutz2 жыл бұрын
Put the sight in the bow. Get a nice plumb doorway. Lay the bow in and adjust together.
@brianbrft2 жыл бұрын
This video was no help whatsoever!
@benjaminhathorne8202 жыл бұрын
Fill the void with spray foam
@jesse5842 жыл бұрын
how did this hold up?
@redoak38092 жыл бұрын
How well has this PVC held up?
@rogermilholland54452 жыл бұрын
Very good.. used it several times and made another one for another pack.
@robertrollins85062 жыл бұрын
Since last year I been going to harbor freight tools an buying tools. I got the 5 drawer tool cart and their sockets an wrenches and other tools. Almost have it full. So I usually go with my dad at the end of the month
@floydcrase6252 жыл бұрын
Alice packs claim to fame is the frame its a work horse
@mosssmith38162 жыл бұрын
Truth be sad I have the brand new and sitting right next to the old one, One of them is going to get put back in (Right?) Mash on the darn peddle, check if working and take your happy ass down the road. 👍
@andybarrete67492 жыл бұрын
I lost a trap a Waukegan steele the rat must of took it not a coworker.
@yukonjack.2 жыл бұрын
Throw its disease-carrying destructive A$$ in a bucket of water!!!
@tobondiego2 жыл бұрын
Mine is working again! Thanks dude! You saved me from insanity !!
@ajsmoth35092 жыл бұрын
Shoot it’s brains off
@robertmiller26292 жыл бұрын
I like the bag and am wondering about the cost also nice job on the small bags on the short starter in the center of the flat area that you made so that it will sit flat on the side of the bag I would drill a shallow hole for the end of the ram rod to fit in so that the short starter is also a palm saver plus a small screw eye off set slightly spirit of the short or long leg to be able to attach a retractable lanyard to it so that you don't lose it. Great work looks nice
@of_the_way2 жыл бұрын
You don't have to remove the tank to change the spark plug. Just use a spark plug socket with a swivel and an extension bar and it comes out no problem.
@roncupp74532 жыл бұрын
Don't care about the weather or house work you talk to much
@russellkamp89232 жыл бұрын
Perfect. Thank you!
@jeffpickel3 жыл бұрын
Hey Roger - another KZreadr posted a much simpler and faster fix by just flipping the machine upside down while pressing in the black button valve where the water reservoir tank pushes into. Didn't have to take anything apart and solved the 5 beeps problem in 10 seconds. I'm sure your fix works great as well but just wanted to give guys another much simpler fix...and no CLR or running through 5 pots needed! Here is a link to the fix: kzread.info/dash/bejne/eGVs0q6YdZmnfKQ.html
@orinm41283 жыл бұрын
Military grade PVC
@sidsquid97823 жыл бұрын
Nice job! With a plastic valve and fitting you could also carry your water inside. Instant canteen! Cheers.
@MarcoFanciulli3 жыл бұрын
You are a dog, never seen such a mess, the stainless steel cross screws on the revolver ... They should take away all your weapons and forbid the purchase and possession, you are not worthy.
@rogermilholland54453 жыл бұрын
Idiot.. go play dress up somewhere else
@rosemaldonado65963 жыл бұрын
How do you get rid of the Clean light?
@nilspetersson31623 жыл бұрын
I found it interesting how often you say "anyway", so i counted, and it was 15, which is an average of one "anyway" every 15.5 seconds.
@siriusgd47533 жыл бұрын
Given enough time, that AVERAGE sized rat will work it's heat out of that trap. It didn't break his neck.
@gerardburton10813 жыл бұрын
Introduce him to a local cat who will take care of him.
@tonycureton30033 жыл бұрын
Douse the rat with gas an light it up 😁
@brajuda37533 жыл бұрын
Boss rat: " The traps xan't handle me, bitch. " 😂
@robertwong24123 жыл бұрын
You need to hotglue nails to the edges of the snapping area. This way when the trap slams down it will puncture the rat's neck/wind pipe and kill it in seconds.
@StompingRabbits3 жыл бұрын
Dismember it slowly...
@alex1311t3 жыл бұрын
Put a steel BB or pellet through it's head
@80sHolyHighRecords3 жыл бұрын
Cook it
@julieinsley76543 жыл бұрын
Omg it's a huge 🐀 rat.. Can't stand them..
@lauramasters67953 жыл бұрын
Rats even mice are filthy creatures
@luiso68273 жыл бұрын
Great video not many explain or test the switch. I just did this yesterday, wish I would’ve seen this before lol.
@raymondbrown32163 жыл бұрын
I like the setup that you have but since you are using pillow ticking with your round balls I am surprised that you do not have a patch knife that you use to cut patches or do you I did not see one also on your shirt starter I would also drill a shallow hole ( divot) for the end of your ram rod to sit in so that it also acts as a palm saver and if you drill and place a small screw eye in the top end of your short starter you can use a retractable lanyard with it so as not to lose it in the woods. It will help with a touch of modern with classic. Keep your powder dry and good hunting.
@EddieKM3 жыл бұрын
I laughed out loud when he says " I think he's the rat that chewed the belt in my lawn mower" lmao idk why that's funny to me
Пікірлер
Will this work with the ultrex?
Thanks, brother, I tried everything, and I ended up using your method with a small sink air plunger, and it fixed my old and newer machines. Nothing worked even straight CLR.
So. Did the pack fit on the frame. Looked at your videos and did not see the final product.
Is it squeaky after awhile?
My fuse was out. Thank you!!!!!!!
Thanks for showing how to test for continuity. Let me know I had a bad switch.
Sir ..please make a video on how to attach the pack on the frame you made...good video learned a lot watching...thank you very much
Nice job! What's the weight of the frame without the straps?
Glad we're not the only one's in DFW with a hard water problem. Our coffee makers always get scaled up SO quickly.
I use a 1/16 roll pin. And I polished the shield to allow caps to fall out
would have worked fine with the 24v head.
Did u convert ur 24v to 36v 101 lbs?
I heard you can cut off the bolt, and turn it the other way so it's sticking forward out of the way.
notch in hammer i see
I bet you could use electrical conduit might give er a build and check back
Where'd you get the new vents ? The dealer? They're over $100 each! I have broken luvers. Do you still have your old ones? I'd love to buy them!
I bought one off ebay
Whats the off set on your rims looks pretty big Im running 275/60r20's with minimal rubbing
Put the sight in the bow. Get a nice plumb doorway. Lay the bow in and adjust together.
This video was no help whatsoever!
Fill the void with spray foam
how did this hold up?
How well has this PVC held up?
Very good.. used it several times and made another one for another pack.
Since last year I been going to harbor freight tools an buying tools. I got the 5 drawer tool cart and their sockets an wrenches and other tools. Almost have it full. So I usually go with my dad at the end of the month
Alice packs claim to fame is the frame its a work horse
Truth be sad I have the brand new and sitting right next to the old one, One of them is going to get put back in (Right?) Mash on the darn peddle, check if working and take your happy ass down the road. 👍
I lost a trap a Waukegan steele the rat must of took it not a coworker.
Throw its disease-carrying destructive A$$ in a bucket of water!!!
Mine is working again! Thanks dude! You saved me from insanity !!
Shoot it’s brains off
I like the bag and am wondering about the cost also nice job on the small bags on the short starter in the center of the flat area that you made so that it will sit flat on the side of the bag I would drill a shallow hole for the end of the ram rod to fit in so that the short starter is also a palm saver plus a small screw eye off set slightly spirit of the short or long leg to be able to attach a retractable lanyard to it so that you don't lose it. Great work looks nice
You don't have to remove the tank to change the spark plug. Just use a spark plug socket with a swivel and an extension bar and it comes out no problem.
Don't care about the weather or house work you talk to much
Perfect. Thank you!
Hey Roger - another KZreadr posted a much simpler and faster fix by just flipping the machine upside down while pressing in the black button valve where the water reservoir tank pushes into. Didn't have to take anything apart and solved the 5 beeps problem in 10 seconds. I'm sure your fix works great as well but just wanted to give guys another much simpler fix...and no CLR or running through 5 pots needed! Here is a link to the fix: kzread.info/dash/bejne/eGVs0q6YdZmnfKQ.html
Military grade PVC
Nice job! With a plastic valve and fitting you could also carry your water inside. Instant canteen! Cheers.
You are a dog, never seen such a mess, the stainless steel cross screws on the revolver ... They should take away all your weapons and forbid the purchase and possession, you are not worthy.
Idiot.. go play dress up somewhere else
How do you get rid of the Clean light?
I found it interesting how often you say "anyway", so i counted, and it was 15, which is an average of one "anyway" every 15.5 seconds.
Given enough time, that AVERAGE sized rat will work it's heat out of that trap. It didn't break his neck.
Introduce him to a local cat who will take care of him.
Douse the rat with gas an light it up 😁
Boss rat: " The traps xan't handle me, bitch. " 😂
You need to hotglue nails to the edges of the snapping area. This way when the trap slams down it will puncture the rat's neck/wind pipe and kill it in seconds.
Dismember it slowly...
Put a steel BB or pellet through it's head
Cook it
Omg it's a huge 🐀 rat.. Can't stand them..
Rats even mice are filthy creatures
Great video not many explain or test the switch. I just did this yesterday, wish I would’ve seen this before lol.
I like the setup that you have but since you are using pillow ticking with your round balls I am surprised that you do not have a patch knife that you use to cut patches or do you I did not see one also on your shirt starter I would also drill a shallow hole ( divot) for the end of your ram rod to sit in so that it also acts as a palm saver and if you drill and place a small screw eye in the top end of your short starter you can use a retractable lanyard with it so as not to lose it in the woods. It will help with a touch of modern with classic. Keep your powder dry and good hunting.
I laughed out loud when he says " I think he's the rat that chewed the belt in my lawn mower" lmao idk why that's funny to me
Lame