Great video, I have both and I think Jim Boomba's are excellent! Regarding hydrolysis, Jim Boomba's use a PVC sole (I think?), so this should not be a problem? But take care, Blunstone's had issues, as the soles are a rubber compound and absorb moisture, so if stored in a damp environment they can breakdown! Found that out to my cost! I now line my boots with screwed up newspaper if I store them for any period of time and keep them out of my garage - no problems since!
@notadoctora795620 күн бұрын
What material is it made from? Is the outer shower proof? With taped seams?
@Jay-Ninja20 күн бұрын
It’s waxed cotton so is showerproof, Not sure if the seams are taped though.
@Icanreadgood121 күн бұрын
pretty friggen sweet man
@TheGreatestBeyonder29 күн бұрын
Here’s the funny thing….. in the pictures (presumably supplied by on all retail websites by Black) the jacket looks much darker in colour and very cool. But during you video it looks much lighter and far less appealing!?! Perhaps Black should actually make this very cool jacket in the far better darker colour, rather than perform some trickery! 👍🏻 Thank you for the review!
@Jay-Ninja29 күн бұрын
Thanks for the comment. Actually my set up is slightly over exposed and you're right the jacket is actually darker than it appears here. So my fault I’m afraid.
@TheGreatestBeyonder29 күн бұрын
@@Jay-Ninja Great. I may give it a try on!
@Jay-Ninja29 күн бұрын
@@TheGreatestBeyonder👍 - You have an XSR900? I had one lovely bikes. Currently own a Speed Twin 1200.
@TheGreatestBeyonder29 күн бұрын
@@Jay-Ninja amongst a few others, yes 👍
@_MasonSummersАй бұрын
Excited to see where you go with this Jason!
@Jay-NinjaАй бұрын
So am I!
@michaelakrispler1975Ай бұрын
It’s me FreddieLaw!!!!!!!!
@eveashby5516Ай бұрын
Very funny, look forward to seeing more videos 😊
@hyper2highАй бұрын
Amazing job
@Jay-NinjaАй бұрын
Thank you.🙏
@charlottedriweave937Ай бұрын
Really enjoyed watching this restoration video. I especially loved your camera angles. So many videos I watch you can’t quite see what the person is doing. This was clean. Thank you. 🤩
@Jay-NinjaАй бұрын
Thank you, that's very kind.
@huwadamsonАй бұрын
Came here from the cafe racer FB group, and glad I did. A lovely bit of video work as well as an immensely satisfying restoration
@Jay-NinjaАй бұрын
Awesome, thank you!
@davidsaxby5400Ай бұрын
But you left the dork disc on the wheel 😩
@michaelakrispler1975Ай бұрын
It looks fantastic- a real labour of love! ❤
@Jay-NinjaАй бұрын
It really is!
@eveashby5516Ай бұрын
It would look great with a basket on the front - which would also be very useful for carrying your lunch to work!
@PM_13Ай бұрын
Great work how long was the transformation?
@Jay-NinjaАй бұрын
Thank you. It took me about 6 weeks, squeezing in an hour or two here and there in between work, family and sleeping!!😂
@mixcleangreen5392Ай бұрын
It looks SO good!
@Jay-NinjaАй бұрын
Thank you so much
@eveashby5516Ай бұрын
Looks amazing, what a transformation 😊
@Jay-NinjaАй бұрын
Thank you! 😊
@AshRowlandАй бұрын
Congrats on the video mate, good to see you doing well! You got a lot done in 6 minutes 😂
@Jay-NinjaАй бұрын
Thanks buddy. Slightly less daunting than a GPZ900!!
@AshRowlandАй бұрын
@@Jay-Ninja same but different mate, it's all nuts and bolts, just a few more of them sometimes 🤣
@goandcycleАй бұрын
Great work!
@Jay-NinjaАй бұрын
@@goandcycle Thank you.
@user-po7rf2if6s2 ай бұрын
😂😂😂😂😂😂
@eltano062 ай бұрын
i would have gone with disk brakes on the front
@Jay-Ninja2 ай бұрын
I was tempted, but was working to a budget so decided against. Maybe on the next one!
@marciosilvadejesus97272 ай бұрын
ficou top 10
@tonypotter95782 ай бұрын
Very nice. Are the tyres ‘Baldys’?
@Jay-Ninja2 ай бұрын
Well spotted. EBay, £30 for a pair
@madtownangler3 ай бұрын
After all that work and awesome paint job I'd be afraid of chipping the paint now.
@tmayberry75593 ай бұрын
Now that is a proper build 😊
@gabbadj3 ай бұрын
Where did you get the decal kit? I have a Gary Fisher Piranha I'm rebuilding this summer.
@Jay-Ninja3 ай бұрын
I got them off eBay. www.ebay.co.uk/itm/362057574301?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=fhMjma0mQkK&sssrc=4429486&ssuid=c4ALIja1SD-&var=631286754784&widget_ver=artemis&media=COPY
@mixcleangreen53924 ай бұрын
All new fittings? Love the colour. It looks banging!
@chaosflower48924 ай бұрын
I know where one of these frames has been dumped for years if anyone needs a gear hanger..
@vaidaabromaviciute95174 ай бұрын
Looks amazing 😊
@eveashby55164 ай бұрын
Great renovation, a real transformation 😊
@AllToldCreative4 ай бұрын
Nice restoration. The green and brown colour scheme really works well.
@Maul5655 ай бұрын
The less you wear them, after your first few wears, the soles will go through hydrolisis…
@Jay-Ninja5 ай бұрын
They are going on today! Never knew this.
@glenjenkins96915 ай бұрын
If the soles are the same rubber as Blundstone I wouldn't leave the new pair sitting waiting as they will suffer from Hydrolysis
@Jay-Ninja5 ай бұрын
Ooh, really. Not sure what that is or what will happen but thanks for the tip. Off to google that now.
@ib78446 ай бұрын
Great project and really looking forward to seeing it progress. I am planning to refurbish a 1998 Schwinn, so this is perfect reference 👍
@Jay-Ninja6 ай бұрын
Thanks buddy. Hope to get it all done for spring! Thanks for watching.
@robertmcfadyen91566 ай бұрын
Mine had a Titec Ithys Amore saddle on it .
@robertmcfadyen91566 ай бұрын
Jay , why didn't you do a proper comprehensive stripdown as I did with my Tassajara . The bottom bracket on mine was in bad shape and not obvious until my crankset was removed . The forks also needed servicing .
@Jay-Ninja6 ай бұрын
I thought I’d focus on the basic strip down first - it’s easy to remove brakes and gear cables etc 😁. I’ll clean these parts up and once done tackle the cranks and forks in a separate video. Hope you’ll join for the ride!👍
@robertmcfadyen91566 ай бұрын
The 2004 one was cobalt in colour .
@robertmcfadyen91566 ай бұрын
This is a 2005 Taasajara . I have the 2004 one which is already refurbished . The top tubes were quite long on these .
@Jay-Ninja6 ай бұрын
Thanks Robert, I wondered what year it was 😁
@BikeShedBoy6 ай бұрын
Cool video and very nice frame. Keep up the great work! Sub from me pal 👍
@Jay-Ninja6 ай бұрын
Thank you. And appreciate the sub.👍
@monikameraki7 ай бұрын
Oh wow. Such a beautiful video. I absolutely loved it 🧡🏍️
@Jay-Ninja7 ай бұрын
Thank you very much!
@professorvoluck93113 жыл бұрын
Do you still own this bike? I’m thinking of buying one and my number 1 concern is reliability. Any issues?
@SavioureG Жыл бұрын
I'm most certainly going to buy this bike. From online forum what I can gather is that the Speed Triple is a rock solid reliable bike with a very reliable engine, one of the best in the industry. Triumphs are generally reliable from personal experience.
@kanupetit9 жыл бұрын
Hello, I have a TDM 900 2006. Can you tell me where I can buy the handlebars that you carry in your TDM? It has long been what I want to change and do not know which would be the best option. Thank you.
@Jay-Ninja9 жыл бұрын
kanupetit Hi there, All items were purchased from ebay .co.uk - The clamps - Just type in RFX Fat Bar Fatbar Handlebar Mounting Kit 28mm YAMAHA. The bars from a UK company called Motopike.com - Hope that helps.
@acebars9 жыл бұрын
I too find the barbour and other waxes are too soft, I'd prefer a tougher wax. How exactly have you made the paraffin and beeswax mix? Or can I just heat up a pot of barbour or other wax and just add more beeswax to it?
@richmck0079 жыл бұрын
Good video. Never put a waxed garmet in a washing machine Always use the brand's own wax to re-wax the jacket. You need a hairdryer, rough clth or sponge and a lot of patience to do it correctly. I own for wax jackets, have re-waxed them to perfection. Each one took three working days. Heating the wax , dabbing it onto the jacket and using a hairdryer to reheat the wax as I worked it into the jacket making sure I did not use too much wax in any area of the garment. Believe me, you cando it, but you need time. Souce. belstaff Trailmaster, Sonar Barbour and also Bedale jacket owner.
@goleobl10 жыл бұрын
Great bike :)
@campbellcooper88010 жыл бұрын
To get your Campbell Cooper jacket visit www.campbellcooper.com !
@Jay-Ninja6 ай бұрын
Great jackets and a very good price.
@majorgsd759110 жыл бұрын
thanks i tried it your way and it worked great. the best my barbour has ever looked
Пікірлер
Great video, I have both and I think Jim Boomba's are excellent! Regarding hydrolysis, Jim Boomba's use a PVC sole (I think?), so this should not be a problem? But take care, Blunstone's had issues, as the soles are a rubber compound and absorb moisture, so if stored in a damp environment they can breakdown! Found that out to my cost! I now line my boots with screwed up newspaper if I store them for any period of time and keep them out of my garage - no problems since!
What material is it made from? Is the outer shower proof? With taped seams?
It’s waxed cotton so is showerproof, Not sure if the seams are taped though.
pretty friggen sweet man
Here’s the funny thing….. in the pictures (presumably supplied by on all retail websites by Black) the jacket looks much darker in colour and very cool. But during you video it looks much lighter and far less appealing!?! Perhaps Black should actually make this very cool jacket in the far better darker colour, rather than perform some trickery! 👍🏻 Thank you for the review!
Thanks for the comment. Actually my set up is slightly over exposed and you're right the jacket is actually darker than it appears here. So my fault I’m afraid.
@@Jay-Ninja Great. I may give it a try on!
@@TheGreatestBeyonder👍 - You have an XSR900? I had one lovely bikes. Currently own a Speed Twin 1200.
@@Jay-Ninja amongst a few others, yes 👍
Excited to see where you go with this Jason!
So am I!
It’s me FreddieLaw!!!!!!!!
Very funny, look forward to seeing more videos 😊
Amazing job
Thank you.🙏
Really enjoyed watching this restoration video. I especially loved your camera angles. So many videos I watch you can’t quite see what the person is doing. This was clean. Thank you. 🤩
Thank you, that's very kind.
Came here from the cafe racer FB group, and glad I did. A lovely bit of video work as well as an immensely satisfying restoration
Awesome, thank you!
But you left the dork disc on the wheel 😩
It looks fantastic- a real labour of love! ❤
It really is!
It would look great with a basket on the front - which would also be very useful for carrying your lunch to work!
Great work how long was the transformation?
Thank you. It took me about 6 weeks, squeezing in an hour or two here and there in between work, family and sleeping!!😂
It looks SO good!
Thank you so much
Looks amazing, what a transformation 😊
Thank you! 😊
Congrats on the video mate, good to see you doing well! You got a lot done in 6 minutes 😂
Thanks buddy. Slightly less daunting than a GPZ900!!
@@Jay-Ninja same but different mate, it's all nuts and bolts, just a few more of them sometimes 🤣
Great work!
@@goandcycle Thank you.
😂😂😂😂😂😂
i would have gone with disk brakes on the front
I was tempted, but was working to a budget so decided against. Maybe on the next one!
ficou top 10
Very nice. Are the tyres ‘Baldys’?
Well spotted. EBay, £30 for a pair
After all that work and awesome paint job I'd be afraid of chipping the paint now.
Now that is a proper build 😊
Where did you get the decal kit? I have a Gary Fisher Piranha I'm rebuilding this summer.
I got them off eBay. www.ebay.co.uk/itm/362057574301?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=fhMjma0mQkK&sssrc=4429486&ssuid=c4ALIja1SD-&var=631286754784&widget_ver=artemis&media=COPY
All new fittings? Love the colour. It looks banging!
I know where one of these frames has been dumped for years if anyone needs a gear hanger..
Looks amazing 😊
Great renovation, a real transformation 😊
Nice restoration. The green and brown colour scheme really works well.
The less you wear them, after your first few wears, the soles will go through hydrolisis…
They are going on today! Never knew this.
If the soles are the same rubber as Blundstone I wouldn't leave the new pair sitting waiting as they will suffer from Hydrolysis
Ooh, really. Not sure what that is or what will happen but thanks for the tip. Off to google that now.
Great project and really looking forward to seeing it progress. I am planning to refurbish a 1998 Schwinn, so this is perfect reference 👍
Thanks buddy. Hope to get it all done for spring! Thanks for watching.
Mine had a Titec Ithys Amore saddle on it .
Jay , why didn't you do a proper comprehensive stripdown as I did with my Tassajara . The bottom bracket on mine was in bad shape and not obvious until my crankset was removed . The forks also needed servicing .
I thought I’d focus on the basic strip down first - it’s easy to remove brakes and gear cables etc 😁. I’ll clean these parts up and once done tackle the cranks and forks in a separate video. Hope you’ll join for the ride!👍
The 2004 one was cobalt in colour .
This is a 2005 Taasajara . I have the 2004 one which is already refurbished . The top tubes were quite long on these .
Thanks Robert, I wondered what year it was 😁
Cool video and very nice frame. Keep up the great work! Sub from me pal 👍
Thank you. And appreciate the sub.👍
Oh wow. Such a beautiful video. I absolutely loved it 🧡🏍️
Thank you very much!
Do you still own this bike? I’m thinking of buying one and my number 1 concern is reliability. Any issues?
I'm most certainly going to buy this bike. From online forum what I can gather is that the Speed Triple is a rock solid reliable bike with a very reliable engine, one of the best in the industry. Triumphs are generally reliable from personal experience.
Hello, I have a TDM 900 2006. Can you tell me where I can buy the handlebars that you carry in your TDM? It has long been what I want to change and do not know which would be the best option. Thank you.
kanupetit Hi there, All items were purchased from ebay .co.uk - The clamps - Just type in RFX Fat Bar Fatbar Handlebar Mounting Kit 28mm YAMAHA. The bars from a UK company called Motopike.com - Hope that helps.
I too find the barbour and other waxes are too soft, I'd prefer a tougher wax. How exactly have you made the paraffin and beeswax mix? Or can I just heat up a pot of barbour or other wax and just add more beeswax to it?
Good video. Never put a waxed garmet in a washing machine Always use the brand's own wax to re-wax the jacket. You need a hairdryer, rough clth or sponge and a lot of patience to do it correctly. I own for wax jackets, have re-waxed them to perfection. Each one took three working days. Heating the wax , dabbing it onto the jacket and using a hairdryer to reheat the wax as I worked it into the jacket making sure I did not use too much wax in any area of the garment. Believe me, you cando it, but you need time. Souce. belstaff Trailmaster, Sonar Barbour and also Bedale jacket owner.
Great bike :)
To get your Campbell Cooper jacket visit www.campbellcooper.com !
Great jackets and a very good price.
thanks i tried it your way and it worked great. the best my barbour has ever looked
???
nice bike
Yay!!! Coolest bike and jacket!
Thanks Guys.
Nice film. Nice music..