How do you cut out the holes for the LEDs on those black plastic pieces?
@dislife76822 күн бұрын
Do you make the clear lenses yourself? I have been trying to make some clear lenses for my car but the vacuum forming process is just raw pain
@murda88514 күн бұрын
*How to make clear tail lights* “First thing you’ll need is a clear tail light” absolutely fucking moronic video
@andreparcells77884 күн бұрын
Honestly, do you take orders?? I would gladly pay for you to build me a set like this
@zaccook4 күн бұрын
yep! the company name is ntxglow
@josuffdubya5 күн бұрын
Love the videos! Informative 🔥
@mfrancovaz6 күн бұрын
where can i buy this sequential module?
@zezaoaleatorio22587 күн бұрын
nice nice
@richarddobreny66647 күн бұрын
Stretching the byutle is a great idea. You should also address the breaking of the studs, they tend to break all the time, baking soda and crazy glue.
@zaccook7 күн бұрын
those studs are so annoying!! I haven't really found a good way to remove them without them breaking
@DHANUBELCHADA7 күн бұрын
What's that white blur sheet is called?
@zaccook7 күн бұрын
It’s a custom led kit
@zaccook7 күн бұрын
ntxglow.com/collections/honda-acura-diy-kits
@YoungSperm8 күн бұрын
How do I get some custom work from you? 👀 I have a set of 2010 acura TL taillights that I been wanted modified
@oscarjaramillo750210 күн бұрын
I need a bear
@nascardrawings770010 күн бұрын
How often would you say you get complaints because of a product that ended up hyperflashing or throwing an error message? I just know from working on Ram trucks and having a Dodge myself that they throw a hissy fit when it comes to lighting. In this case I understand why it will be fine because you still kept factory LEDs but in another instance do the BlueGhozt and CorsoMotion modules work with full on load resistors? And are these resistors hidden in the assemblies somewhere or dangling out where other people can see? Just so many questions from a lot of your videos, they really are a blast to watch
@xXIBON3ZIXx10 күн бұрын
Not op but usually you have to install a resistor separately to not have hyper flash.
@zaccook10 күн бұрын
Thanks!! early early on I had a few issues with some hyper flashing and will still get it with the "illumaesthic" style builds but I send out load resistors for those builds. Ive been afraid to install the load resistors inside the tail lights just because they get so hot and ive heard some horror stories about putting them inside the tails. so ill send load resistors with those builds but let the customer choose if they install them on the harness or try to find led flasher relays (if available for that vehicle)
@Notesplace-my9uz13 күн бұрын
Looks great I have a Toyota Venza and would like to update the headlights what’s the cost range for that type of work
@davidkdanso363213 күн бұрын
Nice one, thanks ❤❤❤
@caribbeankartel575814 күн бұрын
Bro just talked the whole time
@zaccook14 күн бұрын
Well yeah …..
@skepsis923817 күн бұрын
Hello, do you have any information about sequential module? Is build by you? Could you share some information? Thank you and nice job!
@thatblue_fg282421 күн бұрын
where can I buy a pair??
@avinashyadav101821 күн бұрын
Hey man, is there any cheaper alternative to Ghozt sequencer nd corsomotion sequencer?
@brandonsouthernky22 күн бұрын
Do you offer this service for $ . I live in bowling green ky and would like to find someone to do mine
@thome187523 күн бұрын
How do you test the lights without them blowing up?
@RazoE24 күн бұрын
Hey, is it possible to show more of the Ultrasonic cutting process? I bought one and just cannot get the hang of it. I see your cuts are smooth, but mine have plastic bubbling out, no matter the speed or power. I have a ZD-01, which I believe you're using as well
@cadendugas134624 күн бұрын
is ur blade fresh? are you making sure to use the blade part only? nor the shaft of the blade?
@RazoE23 күн бұрын
@@cadendugas1346 yeah. Brand new blade
@finechina105824 күн бұрын
Can I order from you please 🤣✨🥲
@leonildodias124027 күн бұрын
Hello friend, how to have a module like these?
@tuksser28 күн бұрын
what is the name of your laser machine?
@zaccook28 күн бұрын
I believe its the xtool amzn.to/3x7voX7
@tuksser28 күн бұрын
Cool! Hi Zac! where flyryde? where did this guy go?
@moisesjose351429 күн бұрын
Hey zac. Do you have IG need see if you can make me some tailights?
I have a gt43 do anyone know if you can replace a tail light or do I have to get the whole assembly
@zaccook29 күн бұрын
ohhhhh im not sure, we would have to bring the tail light in house to see if it can even be cleared out but from the pictures it kind of looks like the outer lens itself is red which means we will not be able to clear it out.
@Reck__LivАй бұрын
Been watching your videos and you’re a beast. Question will you be able to make q45 tails clear with a show mode
@zaccook29 күн бұрын
Thanks! we might be able to! but you'll need to shoot us an email so we can double check
@Reck__Liv28 күн бұрын
@@zaccook sent you an email with the idea and vision
@electrolytes4350Ай бұрын
Did you put the board in the oven to heat it up for molding?
@zaccook29 күн бұрын
yes, 4 minutes at 220
@elliott_woodworkingАй бұрын
Turned out awesome!
@slimatmimАй бұрын
What watt is his laser? Looks good
@zaccookАй бұрын
That’s a good question! I think that it’s the smaller one (lol sorry i don’t know much about them)
@natjulighting6611Ай бұрын
It's a 10w laser
@bitsurfer0101Ай бұрын
What kind of plastic did Josh use for the Air Intake ring?
@zaccookАй бұрын
its paint
@josiahflores2191Ай бұрын
do you need a caulk gun to get the silicone out?
@zaccookАй бұрын
Yes but the caulking guns are cheap like 10 bucks
@josiahflores2191Ай бұрын
If i don’t have shoo goo, where can I go to pick up some strong adhesive glue? I live in suburbs of chicago so any places you may think may have what i’m looking for please let me know 🙏🏻
@zaccookАй бұрын
I also like the "goop" automotive adhesive which I have seen at AutoZone and o reilly amzn.to/3KDqP9U
@jarviskelly4066Ай бұрын
You made these
@jarviskelly406618 күн бұрын
Can you Make me a pair
@tinytrexgaming2649Ай бұрын
Thank you for this, i had no idea where the pixel count were at also just learned if you dont ahve a build thats specific for a ghozt you can still use a ghozt as a led controller might not have all the functionality but can still use thw show modes
@zaccookАй бұрын
oh yeah! all of the new pre built headlights with rgb in them can be wired up to a blueghozt module. and you can wire up the factory functions as well but you'll have to tap into the headlight harnesses
@tinytrexgaming2649Ай бұрын
@@zaccook ya I'm trying to figure that out right now, ik where and what wires I need for custom turn signals, rn they work but no customizing and the DRLs I have a base accord with touring headlight and the harness needed but no idea what wire is for the drls so dang confusing I just want those awesome start up sequences 🤧
@unkownfather498Ай бұрын
Is this legal in cali? Cuz i want clears so bad but i dont want a ticket😭
@zaccookАй бұрын
no idea hahaha seems like a lot of stuff is not legal in california lolol
@swagmasternuggies4855Ай бұрын
What kind of paint do you use on the lenses?
@zaccookАй бұрын
automotive paint, literally have had them painted at autobody shops
@zezaoaleatorio2258Ай бұрын
Thank you for the content. I gained a lot of knowledge and applied it to my life. I have been making headlights for a year now that I am starting to get better materials. I wanted to know where I can get the DRL strip controllers. I am from Brazil, my friend. All the best.
@zaccookАй бұрын
awesome!! so glad to hear it! so we use the blueghozt module is our go to for other DRL stuff we go with next level neo
@zezaoaleatorio225829 күн бұрын
@@zaccook thansk bro
@djyerangel958Ай бұрын
Where can I find that type of acrylic?
@zaccookАй бұрын
amzn.to/3wWvnVT this is it
@djyerangel958Ай бұрын
@@zaccook thanks 🙏
@MrSkull18Ай бұрын
I have the same tails and have been wanting to do this for a while now but where the black trim is on the inside I have a piece of plastic covering the spot where I need to cut any tips for getting into really tight places?
@zaccookАй бұрын
no major tips lol just make sure you have a tool that can fit down in there
@PURPONTHETRACKАй бұрын
Should of curved the ends downwards.closer to oem.
@zaccookАй бұрын
Nah
@darinfoxcroft1651Ай бұрын
I know you want to get your hands on the s650 tails
@86-TruenoАй бұрын
Just did this to my car today. I recommend going to home depot and getting a 3" hole saw by Milwaukee. It has holes in the side of the blade so if your hole is just snug at 3" you can tilt the hole saw at an angle and slowly make the hole a little bigger. Also after all done I used black rtv gasket maker to go around any spot that would not be completely covered
@nascardrawings7700Ай бұрын
Are those 2024 mustang lights sitting on the oven?
@zaccookАй бұрын
Unfortunately no but i have opened a set of 24 mustang tails 😅😅
Hi there, would you recommend through hole leds or the strips for larger applications? I am planning on making some custom tails for my 3rd gen prelude, and for what I want to do, I have to cover a lot of distance. Also what are some reasons to use one over the other? thanks!
@morpheon_xyzАй бұрын
Sweet, loving these challenges and seeing what you're doing. Keep it up 🙌
Пікірлер
How do you cut out the holes for the LEDs on those black plastic pieces?
Do you make the clear lenses yourself? I have been trying to make some clear lenses for my car but the vacuum forming process is just raw pain
*How to make clear tail lights* “First thing you’ll need is a clear tail light” absolutely fucking moronic video
Honestly, do you take orders?? I would gladly pay for you to build me a set like this
yep! the company name is ntxglow
Love the videos! Informative 🔥
where can i buy this sequential module?
nice nice
Stretching the byutle is a great idea. You should also address the breaking of the studs, they tend to break all the time, baking soda and crazy glue.
those studs are so annoying!! I haven't really found a good way to remove them without them breaking
What's that white blur sheet is called?
It’s a custom led kit
ntxglow.com/collections/honda-acura-diy-kits
How do I get some custom work from you? 👀 I have a set of 2010 acura TL taillights that I been wanted modified
I need a bear
How often would you say you get complaints because of a product that ended up hyperflashing or throwing an error message? I just know from working on Ram trucks and having a Dodge myself that they throw a hissy fit when it comes to lighting. In this case I understand why it will be fine because you still kept factory LEDs but in another instance do the BlueGhozt and CorsoMotion modules work with full on load resistors? And are these resistors hidden in the assemblies somewhere or dangling out where other people can see? Just so many questions from a lot of your videos, they really are a blast to watch
Not op but usually you have to install a resistor separately to not have hyper flash.
Thanks!! early early on I had a few issues with some hyper flashing and will still get it with the "illumaesthic" style builds but I send out load resistors for those builds. Ive been afraid to install the load resistors inside the tail lights just because they get so hot and ive heard some horror stories about putting them inside the tails. so ill send load resistors with those builds but let the customer choose if they install them on the harness or try to find led flasher relays (if available for that vehicle)
Looks great I have a Toyota Venza and would like to update the headlights what’s the cost range for that type of work
Nice one, thanks ❤❤❤
Bro just talked the whole time
Well yeah …..
Hello, do you have any information about sequential module? Is build by you? Could you share some information? Thank you and nice job!
where can I buy a pair??
Hey man, is there any cheaper alternative to Ghozt sequencer nd corsomotion sequencer?
Do you offer this service for $ . I live in bowling green ky and would like to find someone to do mine
How do you test the lights without them blowing up?
Hey, is it possible to show more of the Ultrasonic cutting process? I bought one and just cannot get the hang of it. I see your cuts are smooth, but mine have plastic bubbling out, no matter the speed or power. I have a ZD-01, which I believe you're using as well
is ur blade fresh? are you making sure to use the blade part only? nor the shaft of the blade?
@@cadendugas1346 yeah. Brand new blade
Can I order from you please 🤣✨🥲
Hello friend, how to have a module like these?
what is the name of your laser machine?
I believe its the xtool amzn.to/3x7voX7
Cool! Hi Zac! where flyryde? where did this guy go?
Hey zac. Do you have IG need see if you can make me some tailights?
How can i contact you?
email [email protected]
I have a gt43 do anyone know if you can replace a tail light or do I have to get the whole assembly
ohhhhh im not sure, we would have to bring the tail light in house to see if it can even be cleared out but from the pictures it kind of looks like the outer lens itself is red which means we will not be able to clear it out.
Been watching your videos and you’re a beast. Question will you be able to make q45 tails clear with a show mode
Thanks! we might be able to! but you'll need to shoot us an email so we can double check
@@zaccook sent you an email with the idea and vision
Did you put the board in the oven to heat it up for molding?
yes, 4 minutes at 220
Turned out awesome!
What watt is his laser? Looks good
That’s a good question! I think that it’s the smaller one (lol sorry i don’t know much about them)
It's a 10w laser
What kind of plastic did Josh use for the Air Intake ring?
its paint
do you need a caulk gun to get the silicone out?
Yes but the caulking guns are cheap like 10 bucks
If i don’t have shoo goo, where can I go to pick up some strong adhesive glue? I live in suburbs of chicago so any places you may think may have what i’m looking for please let me know 🙏🏻
I also like the "goop" automotive adhesive which I have seen at AutoZone and o reilly amzn.to/3KDqP9U
You made these
Can you Make me a pair
Thank you for this, i had no idea where the pixel count were at also just learned if you dont ahve a build thats specific for a ghozt you can still use a ghozt as a led controller might not have all the functionality but can still use thw show modes
oh yeah! all of the new pre built headlights with rgb in them can be wired up to a blueghozt module. and you can wire up the factory functions as well but you'll have to tap into the headlight harnesses
@@zaccook ya I'm trying to figure that out right now, ik where and what wires I need for custom turn signals, rn they work but no customizing and the DRLs I have a base accord with touring headlight and the harness needed but no idea what wire is for the drls so dang confusing I just want those awesome start up sequences 🤧
Is this legal in cali? Cuz i want clears so bad but i dont want a ticket😭
no idea hahaha seems like a lot of stuff is not legal in california lolol
What kind of paint do you use on the lenses?
automotive paint, literally have had them painted at autobody shops
Thank you for the content. I gained a lot of knowledge and applied it to my life. I have been making headlights for a year now that I am starting to get better materials. I wanted to know where I can get the DRL strip controllers. I am from Brazil, my friend. All the best.
awesome!! so glad to hear it! so we use the blueghozt module is our go to for other DRL stuff we go with next level neo
@@zaccook thansk bro
Where can I find that type of acrylic?
amzn.to/3wWvnVT this is it
@@zaccook thanks 🙏
I have the same tails and have been wanting to do this for a while now but where the black trim is on the inside I have a piece of plastic covering the spot where I need to cut any tips for getting into really tight places?
no major tips lol just make sure you have a tool that can fit down in there
Should of curved the ends downwards.closer to oem.
Nah
I know you want to get your hands on the s650 tails
Just did this to my car today. I recommend going to home depot and getting a 3" hole saw by Milwaukee. It has holes in the side of the blade so if your hole is just snug at 3" you can tilt the hole saw at an angle and slowly make the hole a little bigger. Also after all done I used black rtv gasket maker to go around any spot that would not be completely covered
Are those 2024 mustang lights sitting on the oven?
Unfortunately no but i have opened a set of 24 mustang tails 😅😅
How can contact you to place an order?
You can order on Ntxglow.com or email [email protected]
Awesome
Hi there, would you recommend through hole leds or the strips for larger applications? I am planning on making some custom tails for my 3rd gen prelude, and for what I want to do, I have to cover a lot of distance. Also what are some reasons to use one over the other? thanks!
Sweet, loving these challenges and seeing what you're doing. Keep it up 🙌