Пікірлер

• 
  @danielschlegel8568 күн бұрын

  Props to dizi. Great video.

• 
  @benstanway323825 күн бұрын

  With this hub you have the option to change to 72 point 6 pawl engagement. I'm pretty sure it's a similar price too. Bearpawls is a Taiwanese company that makes the hubs for Specialized. You can change to 3 pawls 36 point, 4 pawls 36 point, 6 pawls 72point, or I beleive you can also change to a ratchet system similar to DT Swiss but I'm not sure how you would remove the ratchet ring, and I'm not sure if the parts are interchangeable with DT Swiss. I'm not 100% sure but I think the rims are Alexrims. I had a Kenevo ebike with Roval rims and they were terrible for dings. So far these wheels seem more solid.

• 
  @youngstadan4999Ай бұрын

  Thatll make it a pig for the kid to ride

• 
  @kevco8201Ай бұрын

  I rarely comment but this video is clear and to the point and made it so easy! Thanks!!

• 
  @ryanbradbury760Ай бұрын

  Anyone using the RakAttach with Velocirax? 1Up and Velocirax both advise against this setup (I've spoken with each over the phone). I have a Ford Transit 350 with the Velocirax 7 and can't access the barn doors at all. I've tried an 8" hitch extender which doesn't improve barn door access enough to justify the rack sticking out that far. Currently have to unload the entire Velocirax to access the barn doors. Ugh. Also, 1Up has moved on to RakAttach 2.0 exclusively. Thoughts?

• 
  @AllWeatherRidingАй бұрын

  Top video. No nonsense all the information I needed many thanks

• 
  @YanDoroshenko2 ай бұрын

  Funny, I have the same bike and the same helmet as well. Different colors though.

• 
  @KDubber3 ай бұрын

  Thank you! Thank you! Thank you!.... I just purchased a new 2022 Turbo Levo (yes.. a new 2022 in 2024!) that has the exact same fork/shock as your Stumpjumper showcased in the video, so it gave me a much better understanding of what to expect and what to do while setting it up the suspension for my own needs.

• 
  @b-rad6253 ай бұрын

  I think my anti wobble was improperly machined as well. The bolt should thread all the way in so that the bolt head is snug against the hitch correct?

• 
  @dizidoesdownhill3 ай бұрын

  That’s the way I used it. Otherwise the internal plate won’t pull snug against the hitch. My second pin stripped as well after using it last summer. Seems pretty softly made for such a rugged product.

• 
  @pyrodoll24224 ай бұрын

  I'm currently torn between regular and evo, leaning slightly towards the evo. Some great deals on in UK at the moment and I'm not bothered if they're about to change the model slightly. I ride an 18 year old Enduro so I'm thinking anything will feel quicker on the flat and climbs.

• 
  @dizidoesdownhill4 ай бұрын

  Both great bikes! You can’t go wrong.

• 
  @carpballet4 ай бұрын

  We bike for fun and exercise but can’t be bothered to manually open or close the gd hatch. Jesus h, we’re doomed.

• 
  @dizidoesdownhill4 ай бұрын

  Totally! Have fun!

• 
  @i_am_luis_nevarez4 ай бұрын

  Excellent video!!!

• 
  @dizidoesdownhill4 ай бұрын

  Thank you very much!

• 
  @mudders14 ай бұрын

  I'm a bit perplexed. I have the same bike. However I feel like the end cap isn't long enough. Any chance you can measure how far it protrudes from the cassette. I've installed exactly the same parts, Bear Pawls XD driver, XX1 cassette.

• 
  @Carlisle_NinetyOh94 ай бұрын

  Will this work on my Rockhopper Comp? It's Quick Release by the way, with Stout wheels

• 
  @dizidoesdownhill4 ай бұрын

  Sorry. I dont have any info on that bike. The support at Specialized is your best bet. They’re very responsive. Good luck.

• 
  @user-zv4fh6cq2s5 ай бұрын

  Good info - thanks

• 
  @dizidoesdownhill5 ай бұрын

  Glad it was helpful!

• 
  @TazErrant5 ай бұрын

  What a great well put together video. I only weigh 49kg and so sympathise with Mili. The young and the featherweight adults seem to be forgotten about by suspension manufacturers. I thought there must be lots of young lightweight mountain bikers struggling to get fork setup dialled correctly. This was great information and I see you found out there are two tokens/spacers already in these forks, which I wanted to know - thank you. I'm intending to take one out because the ride feels too harsh. Did you end up doing that for Mili?

• 
  @dizidoesdownhill5 ай бұрын

  Many thanks for the very kind words! I did take out one of the tokens. I think it helped smooth things out a bit for Mili but without riding it myself it’s difficult to get a real sense of the difference. Let’s hope the smaller folks are better looked after in the future as there is indeed a big hole here. Thanks again

• 
  @TazErrant2 ай бұрын

  @@dizidoesdownhill I hope Mili is going well?. Just thought I'd update you on my journey in case it helps Mili. I've decided to buy new forks which can be adapted and professionally tuned to my weight. An expensive option but I've only got one set of wrists. I'm buying Manitou Mattock Pro forks. Also the tuning engineer I spoke with told me to take out all 3 of the tokens out of my current Fox 36 Rhythm forks.

• 
  @guslescano85685 ай бұрын

  Great vid. I have the same bike, any future updates please post. 🙏

• 
  @dizidoesdownhill5 ай бұрын

  Thanks! Will do! It’s a great bike!

• 
  @billwilliams47485 ай бұрын

  Beauty eh

• 
  @dizidoesdownhill5 ай бұрын

  Yeah I always like a bit of self sabotage!

• 
  @isaacwinton5 ай бұрын

  Mate this was a bloody good video! You've clearly put a substantial amount of effort in, and it shows! Appreciate your work 🙏

• 
  @dizidoesdownhill5 ай бұрын

  Hey Isaac - thanks very much for your kind comments!

• 
  @rascalmatt67136 ай бұрын

  100% MTB VIrgin here... just getting into it due to Midlife Crisis. Just purchased the 2023 Stumpy EVO Expert. Not going to change a single thing other than going tubeless cause i have NO IDEA what i'm doing anyways. Can't believe i spent that much money on a bike. Hope i don't kill myself on it.

• 
  @dizidoesdownhill6 ай бұрын

  It’s an amazing bike - you’ll have a blast! Just start slowly and have fun!

• 
  @rascalmatt67136 ай бұрын

  @@dizidoesdownhill i think "Start Slowly" is excellent advice.

• 
  @waynelenderman11156 ай бұрын

  All I did was leave the wheels on the ground and wedge the front wheel between my tool cart and my work bench. Took about five minutes to complete.

• 
  @dizidoesdownhill6 ай бұрын

  Thanks for sharing your experience. Sounds like a good approach by stopping the front wheel from moving. Thanks again.

• 
  @jimbo09027 ай бұрын

  Did you manage get the new cup to sit flush to the frame? I have a gap all the way round the cup after swapping it out

• 
  @dizidoesdownhill6 ай бұрын

  Hi James. The cup sat flush when I swapped them.

• 
  @Index-o12347 ай бұрын

  The maximum load would be #3 bikes at 75 pounds each? If the bikes or ebikes are that heavy? I have 4 Superduty racks.

• 
  @dizidoesdownhill6 ай бұрын

  Hi. Can you clarify your question? Thanks.

• 
  @brettgreenhill59197 ай бұрын

  I had exactly the same problem on my new T7 and after watching your great detailed video I am glad I am not alone. Clearly a build fault BIKES ONLINE. It would make sense to just upgrade the lever to a tranzX from the manufacturing side. I spent 2 hours trying to get that cable out of the lever. I did in the end, but the stock lever isn't great. They have at least offered to get a new one. Cheers.

• 
  @dizidoesdownhill7 ай бұрын

  Hey Brett, thanks for checking out the video. Droppers can be temperamental at the best of times and this one is not the best designed. Couple that with the small bike frame and the tighter routing angles and it’s a fiddle. And the stock lever could definitely be improved. But overall it’s a great bike for the money. I hope you enjoy!

• 
  @chewpaeng128 ай бұрын

  Cute little helper you got there 😊 👍🏼

• 
  @dizidoesdownhill7 ай бұрын

  Thanks! He’s a keeper! And thanks for checking out the video.

• 
  @addtext8 ай бұрын

  How much does it weigh?

• 
  @dizidoesdownhill8 ай бұрын

  Set up tubeless without pedals in size S5 I weighed it at 31 lb 15oz. kzread.info/dash/bejne/eoN407aDZbbUcdY.htmlsi=rtGSwfge2J7BX50l

• 
  @thiago_hhp56278 ай бұрын

  Hi! Do you if the S202100002 (microspline freehub) fits the same way you did? I’m trying to figure out how to change from hg to microspline.

• 
  @dizidoesdownhill8 ай бұрын

  Hi Thiago. I do not know if that’s the case. I would contact support at Specialized - they’re very helpful. Thanks for checking out the video.

• 
  @branimal188 ай бұрын

  The bikes are fairly low off the ground. Do you have issues with pebbles getting kicked up onto the carbon frames?

• 
  @dizidoesdownhill8 ай бұрын

  Hi. I’ve never had an issue with that.

• 
  @branimal188 ай бұрын

  Is the swivel 2 steel plates with square tube sandwiched in between?

• 
  @dizidoesdownhill8 ай бұрын

  That’s pretty much it with a large bolt as a pivot.

• 
  @2Tugz9 ай бұрын

  How much weight could be reasonably dropped by swapping wheels, cranks, bars, and dropper?

• 
  @dizidoesdownhill9 ай бұрын

  We didn’t change much at all on the bike. You could certainly save a few pounds going that way but Dex didn’t struggle to handle the bike or peddle it up steepish hills given the low gearing.

• 
  @toddfinney26989 ай бұрын

  Thanks a ton for that great video. It’s such a rare thing with the specialized rim.

• 
  @dizidoesdownhill9 ай бұрын

  Glad it helped! And thanks for the feedback.

• 
  @JoseDunham-bq2fp10 ай бұрын

  Would this bike work for a beginner adult 5 feet tall 110lbs? It's on sale right now for $699 would it be better for me to get a hardtail for a similar price with a small frame?

• 
  @dizidoesdownhill10 ай бұрын

  Hi Jose, I think the D24 would be too small for a 5ft person. Dex is now just over 4’10” and we’ve put him on a Specialized size S1 which I think is essentially somewhere between XS and S. He is able to ride it quite happily but I think he’ll be happier when he is a couple of j ches taller. He could’ve stayed on the D24 a little longer but it was definitely close to the limit at 4’10”. Good luck with your searches.

• 
  @Karlsvbike10 ай бұрын

  Will this bike allow you to make a 1000/1200m slope in an aprox 40km ride? Because I know the enduro part is covered.. I mean, looking for a “total” bike to have fun with enduro trails but also make medium distance routes frecuently. Thank u!

• 
  @dizidoesdownhill10 ай бұрын

  It’s a solid allrounder. Less slack / shorter travel bikes tend to climb better but this bike certainly can climb. And while the Evo climbs better in its high / steep geo settings, I haven’t struggled in the slacker setting. But I’d recommend taking one for a test ride as our perspectives on good and bad may vary. Thanks for checking out the video.

• 
  @Karlsvbike10 ай бұрын

  Hey! than you for your response. I have more doubts in the climbing aspect with so much travel.And sure, I will definitely take a test ride to clear my thoughts , but it looks great. Both bikes indeed, but mostly the yeti ,) Keep on rocking!@@dizidoesdownhill

• 
  @GMss10110 ай бұрын

  Thanks, I found this really useful. Just got my stumpjumper and I immediately made the same change. Small problem though, I’ve somehow ended up with a spacer spare 😅… the manual doesn’t seem to clearly depict each item and what order..

• 
  @dizidoesdownhill10 ай бұрын

  Glad it was helpful! I dont think it really matters the order the spacers go onto the stem as long as the top one protrudes a few mm above the stem to allow proper pretensioning using the stem cap. Thanks for checking out the video!

• 
  @GMss10110 ай бұрын

  @@dizidoesdownhill that’s my mistake, I mean washer, not spacer 😅😅

• 
  @danieletcheverry71510 ай бұрын

  Will this work on a alloy stumpjumper 2022? Thanks

• 
  @dizidoesdownhill10 ай бұрын

  I’m pretty sure it will. If you send Specialized a note, they’re very good at responding to technical questions. Thanks for checking out the video.

• 
  @gondolarides517810 ай бұрын

  Does this driver help with the abysmal engagement on the stock hub?

• 
  @dizidoesdownhill10 ай бұрын

  Pretty sure it has exactly the same number of points of engagement as it has the same number of pawls. I’ll check and comment back here if it’s not the same. Thanks for checking out the video.

• 
  @adamzinnecker214111 ай бұрын

  What year is this Stumpjumper Evo? I have a buddy who has a 2022 SJ Evo and needs a Free Hub body to install a GX cassette. Is this what he needs?

• 
  @dizidoesdownhill11 ай бұрын

  The bike is a 2022 SJ Evo Comp Alloy which has an NX cassette as stock and a Bear Pawls hub. If he’s uncertain, send Specialized Support a note. They’re pretty helpful.

• 
  @josephrhoades246411 ай бұрын

  Any update on this ?

• 
  @dizidoesdownhill11 ай бұрын

  We haven’t upgraded the shock from standard.

• 
  @tinglestravels Жыл бұрын

  Did your EVO Alloy come with a bottom headset cup? It looks like just a bearing that goes into the frame...right?

• 
  @dizidoesdownhill11 ай бұрын

  I’m pretty sure that’s right. The bearing press up into the head tube.

• 
  @Tr_Fast Жыл бұрын

  great video

• 
  @dizidoesdownhill Жыл бұрын

  Many thanks Bryce - and thanks for checking out the video!

• 
  @SaturnineXTS Жыл бұрын

  What a bike! I think we're getting closer and closer to getting a trail bike that does everything an enduro can just as well.

• 
  @dizidoesdownhill Жыл бұрын

  Modern bikes are highly capable and the Evo is a very rounded machine. Thanks for checking out the video.

• 
  @azdakrowflyz5963 Жыл бұрын

  Thank you so much I've been looking for a video and yours is the only one that shows me in detail, keep up the good work

• 
  @dizidoesdownhill Жыл бұрын

  Thanks for checking out the video and the very kind words!

• 
  @Tr_Fast Жыл бұрын

  I’m wondering if this will work with the status 2022?

• 
  @dizidoesdownhill Жыл бұрын

  I’m guessing it has similar hubs to the 2022 Evo Comp Alloy which has Bear Pawls hubs, based on the description on Specialized’s website. I would suggest sending Specialized customer service a note. They are pretty helpful.

• 
  @dizidoesdownhill11 ай бұрын

  I confirmed with Specialized that the Status 2022 has a hub with pawls not star ratchets.

• 
  @YLAGARDE27 Жыл бұрын

  Hi, can you put a jersey over the protection?

• 
  @dizidoesdownhill Жыл бұрын

  Hi. Thanks for checking out the video. I’d guessing you could but it would need to be pretty baggy!

• 
  @sakinu5843 Жыл бұрын

  Thanks for this, there is a ton of convoluted info about this topic but this video is crystal clear for a newbie like me, thanks a lot!.

• 
  @dizidoesdownhill Жыл бұрын

  Thanks for checking out the video - and for the kind comment!

• 
  @MaxPayneLane Жыл бұрын

  Do you know how much that wheel set weighs? Thinking of getting this and upgrading wheels to stans crest, then tubless with lighter tires and a lighter crank. I'm hoping with that we can get the weight down to 27lbs and still be under $2000.

• 
  @dizidoesdownhill Жыл бұрын

  Thanks for checking out the video. Sorry but i dont know what the weight of the wheel set is. Unless you’re racing or have a very small kid, the 30lb weight hasn’t been a big issue for Dex. It’s a great bike for the price.

• 
  @zackkragel Жыл бұрын

  We bought the base model yellow one and upgraded the dropper and brakes we were able to get it on sale for $750 at its lowest point so it was a great deal and my son loves it. He’s been to several lift access bike parks and recently did his first downhill race on it. Several decent crashes, it’s a great bike!

• 
  @dizidoesdownhill Жыл бұрын

  A screaming deal at $750. And it is very solidly built. It will get outgrown before it gets wrecked. Have an awesome time with it!

• 
  @lukelavine3244 Жыл бұрын

  REALLY GREAT VIDEO ON A TON OF DIFFERENT LEVELS!!! Thank you for making this!

• 
  @dizidoesdownhill Жыл бұрын

  That’s very kind of you to say so! Thanks for checking out the video!

• 
  @andrewmichelson6089 Жыл бұрын

  Phenomenal video

• 
  @dizidoesdownhill Жыл бұрын

  That’s very kind of you to say so! Thanks for checking out the video!

• 
  @nick_john Жыл бұрын

  Hey there, my 2021 enduro expert has this hub: Roval DT Swiss 360, 3-pawl design, SRAM XD. Do you know which parts and tool kit is required?

• 
  @dizidoesdownhill Жыл бұрын

  Thanks for checking out the video. You’ll need a LN free hub body upgrade kit and a couple of specific tools. Here’s a link to the info: help.worldwidecyclery.com/hc/en-us/articles/1500000279882-DT-Swiss-Freehubs-with-Ratchet-or-Pawls#:~:text=If%20you%20have%20a%20DT,use%20a%20completely%20different%20design.&text=DT%20Swiss%20has%20released%20a,LN%20Freehub%20Body%20Upgrade%20Kit. Be sure to ask the guys at Worldwide Cyclery about your specific hub. They’re very helpful.