How much is the Harder's tube? Does it cost much less than Elbit's?
@armedtootheteeth281611 күн бұрын
I think you got the 640 and the 384 mixed up.. 640 will always be more clear and crisp
@BigSh00ts18 күн бұрын
How many times have you watched this? Yes.
@turdferguson286324 күн бұрын
Prices higher than hunter biden
@billyyoung1630Ай бұрын
Does it have the intrusive user interfaces icons like the original JYM? Nothing worse than seeing "WHITE" take up the bottom corner of the screen. It looks clean on the video but figured it could be from the recording or cropped.
@falconclaw_Ай бұрын
It does not appear in the recording, it is visible when looking through the device however.
@SpadaforzaАй бұрын
Interesting content, but my god...who wrote this? And why did you give it to AI to voice? That was actually painful to listen to.
@PARA19951Ай бұрын
I just got mine but i cant change the sacrificial lense. its glued in to the crown.
@falconclaw_Ай бұрын
You have the version that needs the whole crown to be replaced. The replaceable lens version is yet to be release to the public. Did you order it from Falconclaw?
@PARA19951Ай бұрын
Ah ok. Yes I ordered on your Website.
@hclarke116Ай бұрын
Awesome,comprehensive review. Thanks
@TressaFowlerАй бұрын
😮😮😮😮
@IIIFrenchyIIIАй бұрын
that's a HELL YEAH
@thegolflife75652 ай бұрын
What country are these made in?
@falconclaw_Ай бұрын
Canada
@nicofi2862 ай бұрын
Hello, I have a 1431 with Jerry c5, this iris is compatible with a carson lens and a jerry c5?
@falconclaw_Ай бұрын
You will be unable to use C5 with the cap. Carson lenses yes
@aesthetic87802 ай бұрын
The Jerry is better. Just because of the one but most important setting. The Collimation setting! You can Collimate the image perfectly to your PVS-14. This means the image is aligned. You can merge the image without eye fatigue.
@smartlifestyleeveryday3336Ай бұрын
Are you ok in the brain? You can collimate of course the Pfalcon as well
@falconclaw_Ай бұрын
PFN has the same feature aswell.
@killtime82 ай бұрын
"You think they know what's about to fuc*'n happen bro?" (*Laughs*) man send that sh*t "Good?" Back blast clear
@billyyoung16302 ай бұрын
The US has the Rix Stride. It is exactly the same but it's not marketed as a clip on. It also seems to use an older software version. Is the Jerry YM version 2 a separate device from version 1 or was it a firmware update? I desperately need this software version! A red value would be amazing. Currently, it just puts the red value in the middle and can't be changed so it's useless. Also I only have 1-5 on contrast and brightness. 1-10 would be game changing!
@jhendies2 ай бұрын
Yeah everything looks identical. I emailed RIX to see if they plan on releasing new firmware. Ill let you know when they get back to me
@luciusrene943Ай бұрын
@@jhendiesI asked them a couple days ago and they said no.
@billyyoung1630Ай бұрын
@@luciusrene943 they told me yes
@bmbullmanАй бұрын
@@billyyoung1630 Lots of conflicting information being put out by RIX then.. that alone is unsat.
@billyyoung1630Ай бұрын
@bmbullman yep. There's either a disconnect between China and Rix customer service, or they're intentionally slow rolling and misdirecting to wait out the AGM StingIR licensing rights to Irays clip on features in the US market. If they're not transparent about it, then assume the worst. I regret purchasing this product.
@ID-99992 ай бұрын
The flir breach is like 2.4- 2.6k atm now
@cityofbricks2 ай бұрын
AWESOME!!
@robertrbh2 ай бұрын
NIce review. Question, what mount are u using for picatiny ? Looks great.
@falconclaw_2 ай бұрын
It is the original one that comes with the product.
@germanshepherd66382 ай бұрын
How does this work for stargazing/ ufo watching?
@falconclaw_Ай бұрын
There are specific videos and reddit post about what to buy for this purpose. Check them out.
@716speedy62 ай бұрын
Any comparison in between mh25 or other models concerning the eye box? Is there a Need for aftermarket modifications like another lens as with the mh25 if you want to use it along with a pvs 14?
@aesthetic87802 ай бұрын
The Jerry is the only option if you want to use it together with a PVS-14. Because you can collimate the image.
@aesthetic87802 ай бұрын
You can Collimate the image perfectly to your PVS-14. This means the image is aligned. You can merge the image without eye fatigue.
@716speedy6Ай бұрын
Thx bud, i know that. The issue with the mh25 was, that a lot of people used an pvs14 eyepiece (additional ~300 bugs) because the eyebox of the mh25 was crappy. I want to know if iray managed to do it better this time, so its comfortable to use a pvs14 and the YM next to each other.
@aesthetic8780Ай бұрын
@@716speedy6 it's not Carson Glass quality. But I would never replace it. It's good enough imo.
@716speedy6Ай бұрын
Its over anyways. Jerry is on the OFAC sanctions List because they oviously distributed stuff to the russians, so no jerry stuff for europe and the us for some time…
@DA986232 ай бұрын
Regarding the much brighter heat signatures of the RH25 seen in this comparison, can the Jerry YM be adjusted to look the same by boosting the contrast? If you were to also boost the contrast of the RH25, does it then outperform the Jerry YM again?
@billyyoung16302 ай бұрын
That's what I was wondering during the comparison. Looked like all he needed to do was boost up the contrast a bit and it would be just as good as the pfalson/rh25. Sometimes I get the sense reviewers intentionally do this so they don't affect the sales of their "higher end" units that have more profit margins $$$.
@falconclaw_Ай бұрын
We tested several different setting on both, the image is still more crisp on the PFN
@victoryero477910 күн бұрын
@@falconclaw_ what's PFN?
@falconclaw_3 күн бұрын
@@victoryero4779 PFalcon 640+ is a thermal which we currently like the most, it comes at a slightly higher price point.
@luciusrene9432 ай бұрын
I think the smaller form factor and dedicated purpose is worth it, but if the lens protector introduces flare or artifacts then that is a problem. Will it accept other sacrificial lenses that have better light transmission?
@usernamedkjahstill50032 ай бұрын
This is a $5,800 optic... they try to gaslight buyers by putting "affordable" scope. They give this to youtubers' for free or practically free or cheap. No, thanks you can keep the Pfalcon 640+... There are better and cheaper thermal optic options
@falconclaw_Ай бұрын
There are cheaper but not better ones, if you buy new this will outperform others in this price range, I have yet to see one that does. If you know of one let us know, we will try and make a comparison side-by-side.
@CyberKatze2 ай бұрын
I've seen this combo on the ksk
@valgo81282 ай бұрын
Isnt the mh25v2 exactly the same as the pfn 640+ in terms of image quality?
@val-gq3mq2 ай бұрын
hi, love your videos! wich elbit is it, xlsh or omni?
@MarkRobinson-qn3we2 ай бұрын
Mate do you have the 384 and the 640 above the images displayed in the right order as the 384 on the left looks a lot better clarity
@falconclaw_Ай бұрын
They are in the correct order yes, the 384 might seem better at some distances and heat signatures, it is also not 1x but more like 1.3x zoom baseline. The sensor in them is slightly different, the 384 has 384×288/17um and 640 640×512/12um so they identify some aspects differently.
@VrILLR2 ай бұрын
I pre-ordered the holosun drs-th, really pumped to finally get it and check it out. Feel like it will be a good companion to my helmet mounted setup. Also, can't hear a damn thing in your video, super quite and muffled.
@joshuaalton18592 ай бұрын
Where to buy
@falconclaw_Ай бұрын
falconclaw.eu :D
@Peterkass2352 ай бұрын
thank you for the detailed video
@falconclaw_Ай бұрын
Was fun making it, you learn alot in the testing process.
@NAFO_Turtle2 ай бұрын
Could there be a way to use a magnified thermal on a flip to side mount to make the system more compact
@iamnotacriminal2 ай бұрын
That’s hustling backwards in quality
@NAFO_Turtle2 ай бұрын
@@iamnotacriminalhow
@Teslabotjames2 ай бұрын
They are 210.usd. Where did you get your number from.
@bassproshophat89992 ай бұрын
Can I purchase from the USA 🇺🇸 ?
@aesthetic87802 ай бұрын
Yes :)
@luciusrene943Ай бұрын
@@aesthetic8780 where?
@Terminatorbart2 ай бұрын
Awesome!
@shawndale15522 ай бұрын
Can only shoot 75 yards with that. Much better options for shooting at 150 yards for same or less money. Combat Infantryman here, and I know these things.
@aesthetic87802 ай бұрын
Shooting? What are you talking? You have it mounted on your helmet. Non sense comment.
@GldenRetriever2 ай бұрын
I still think the RH25/Pfalcon640 is the best, unless the new steiner gen 2 beats it. One could argue these aren't "budget" though, but there aren't anything cheaper id run for a 4 in 1 thermal (weapon, clip on, helmet, handheld).
@falconclaw_2 ай бұрын
No argument there, PFN640 does perform better. Crisper image, better red hot(my fav) and probably more durable(have yet to break a YM tho). It does cost just a bit more and it not as user friendly, YM has most functions you want fast access to(zoom, color palette, etc) just a button combination away, with PFN you need to surf the menu for those.
@GldenRetriever2 ай бұрын
@@falconclaw_ For sure. I hope the gen 2 has a better interface as it isn't fun going into the menu while using it. As for the price, I see it as if you are already spending thousands of dollars on something, a few thousand more to be happy with is worth it for me. Had a few times where I cheaped out on something, only to upgrade to what I originally wanted in the first place.
@rileyfrench38372 ай бұрын
That Steiner C35 Gen2 doesn’t look like it’s rail mountable. Only for direct attachment to large objective scopes. If so, that’s going to really limit it’s use, and won’t really fall into the same category as other small multi-role thermals
@GldenRetriever2 ай бұрын
@@rileyfrench3837 There are rail adapters for those style of clip ones, so I'm sure someone will make one for it if there isn't on already that works. www.optics-trade.eu/blog/wp-content/uploads/2022/09/A-special-rail-mounted-adapter-for-the-M35x1.0-thread-1024x576.jpg
@Terminatorbart2 ай бұрын
Need it! 🔥
@snafuedem2 ай бұрын
Why not get the Infiray Jerry C5 Clip-On?
@falconclaw_2 ай бұрын
Different image quality, detection range and use case, Jerry C5 is great for other things. Might see a video soon about this 😉
@MSKommando2 ай бұрын
Can you use the Thermal on a gun with .308 Win too? Or ITS only for .223 recoil?
@dejuanballard33672 ай бұрын
Each thermal device will have its own individual specs for what it's rated for , although 308 specifically is known for destroying electronics.
@ikemouser25802 ай бұрын
How does it compare with regard go Sidekick 640 with regard to FOV and clarity? Also, it looks "grey'd out", have you tuned the image settings or are you running it stock?
@falconclaw_2 ай бұрын
The image processing on the Jerry-YM seems to be better than the sidekick. The specs look the same but with thermals specs are not the only things that matter. We pick this over the Sidekick any day. What you see through the device and what the video recording looks like are a bit different, it does not look grey and it is a bit better clarity and quality.
@valgo81282 ай бұрын
@@falconclaw_looking to get either of these for my urbex activites. I move slowly actually slower than walking speed and use it only urbex activities so basically distances that you would describe as cqb or at most longer industrial hallways. What would you recommend of these to navigate with. I would love to have a thermal instead of night vision Btw in germany Mh25v2 Falcon 640+ jerry ym 2.0 Or maybe a pvs 7 What would you recommend?
@aesthetic87802 ай бұрын
@@valgo8128What? It's the exact opposite. Thermal and night vision is not the same. Not even close. You want a device for navigation. But you only noted thermal devices. This is not how it works. You need Night Vision for navigation and thermal for detection. I don't know if your comment was serious or not
@threat2demoracy54542 ай бұрын
I love to see thermal getting better and cheaper. More availability for the poors like me! Good stuff brother! 🤙🏼
@allesklar80982 ай бұрын
I wish there was a EU / US competitor with similar price / value.
@falconclaw_2 ай бұрын
Highly likely that you will not see it happen, besides the components would still probably come from outside EU/US, only the price tag would be made in EU/US.
@joffeloff2 ай бұрын
@@falconclaw_ Pulsar makes thermal in Lithuania with French sensors, for a lower price point than these Chinese manufacturers. I see no reason besides their own dumb brand identity why they couldn't make something like the PFN640+.
@billyyoung16302 ай бұрын
@joffeloff as soon as pulsar makes one I'll gladly buy it. The US market is flooded with rebranded Chinese thermals and they are intentionally price gouging us and manipulating the industry by withholding software features that are only available on international versions.
@ateniense_2 ай бұрын
Does it come for pvs31s?
@alansitooo52972 ай бұрын
400$ 😂😂😂
@Teslabotjames2 ай бұрын
They are 213.99 American.
@Roshan_4203 ай бұрын
Do a 4g vs harder gen3
@Rock-ep2ez3 ай бұрын
When teaming with your friends goes to far
@BigSh00ts12 күн бұрын
Too far? Nah. Just right
@Terminatorbart3 ай бұрын
Thermals are awesome!
@falconclaw_3 ай бұрын
The video does not even do it justice, what you see firsthand through the device is even better.
@jpenna19763 ай бұрын
I have had Breach few years. I have used Outdoor alert palette when on bridge with NV. How Jerry YM palettes fit this use?
@falconclaw_3 ай бұрын
As you see in this video the red hot mode is the equivalent of this and it is alot better. We have a detailed video coming out about the YM and you can see clearly how well it performs.
@jpenna19763 ай бұрын
@@falconclaw_ Good to hear! May be time to start thinking how much can ask of low hours Breach 😂
@harrison00xXx3 ай бұрын
Is that a new thing for the military? Sure you need both
Пікірлер
Piece of shit gun
How much is the Harder's tube? Does it cost much less than Elbit's?
I think you got the 640 and the 384 mixed up.. 640 will always be more clear and crisp
How many times have you watched this? Yes.
Prices higher than hunter biden
Does it have the intrusive user interfaces icons like the original JYM? Nothing worse than seeing "WHITE" take up the bottom corner of the screen. It looks clean on the video but figured it could be from the recording or cropped.
It does not appear in the recording, it is visible when looking through the device however.
Interesting content, but my god...who wrote this? And why did you give it to AI to voice? That was actually painful to listen to.
I just got mine but i cant change the sacrificial lense. its glued in to the crown.
You have the version that needs the whole crown to be replaced. The replaceable lens version is yet to be release to the public. Did you order it from Falconclaw?
Ah ok. Yes I ordered on your Website.
Awesome,comprehensive review. Thanks
😮😮😮😮
that's a HELL YEAH
What country are these made in?
Canada
Hello, I have a 1431 with Jerry c5, this iris is compatible with a carson lens and a jerry c5?
You will be unable to use C5 with the cap. Carson lenses yes
The Jerry is better. Just because of the one but most important setting. The Collimation setting! You can Collimate the image perfectly to your PVS-14. This means the image is aligned. You can merge the image without eye fatigue.
Are you ok in the brain? You can collimate of course the Pfalcon as well
PFN has the same feature aswell.
"You think they know what's about to fuc*'n happen bro?" (*Laughs*) man send that sh*t "Good?" Back blast clear
The US has the Rix Stride. It is exactly the same but it's not marketed as a clip on. It also seems to use an older software version. Is the Jerry YM version 2 a separate device from version 1 or was it a firmware update? I desperately need this software version! A red value would be amazing. Currently, it just puts the red value in the middle and can't be changed so it's useless. Also I only have 1-5 on contrast and brightness. 1-10 would be game changing!
Yeah everything looks identical. I emailed RIX to see if they plan on releasing new firmware. Ill let you know when they get back to me
@@jhendiesI asked them a couple days ago and they said no.
@@luciusrene943 they told me yes
@@billyyoung1630 Lots of conflicting information being put out by RIX then.. that alone is unsat.
@bmbullman yep. There's either a disconnect between China and Rix customer service, or they're intentionally slow rolling and misdirecting to wait out the AGM StingIR licensing rights to Irays clip on features in the US market. If they're not transparent about it, then assume the worst. I regret purchasing this product.
The flir breach is like 2.4- 2.6k atm now
AWESOME!!
NIce review. Question, what mount are u using for picatiny ? Looks great.
It is the original one that comes with the product.
How does this work for stargazing/ ufo watching?
There are specific videos and reddit post about what to buy for this purpose. Check them out.
Any comparison in between mh25 or other models concerning the eye box? Is there a Need for aftermarket modifications like another lens as with the mh25 if you want to use it along with a pvs 14?
The Jerry is the only option if you want to use it together with a PVS-14. Because you can collimate the image.
You can Collimate the image perfectly to your PVS-14. This means the image is aligned. You can merge the image without eye fatigue.
Thx bud, i know that. The issue with the mh25 was, that a lot of people used an pvs14 eyepiece (additional ~300 bugs) because the eyebox of the mh25 was crappy. I want to know if iray managed to do it better this time, so its comfortable to use a pvs14 and the YM next to each other.
@@716speedy6 it's not Carson Glass quality. But I would never replace it. It's good enough imo.
Its over anyways. Jerry is on the OFAC sanctions List because they oviously distributed stuff to the russians, so no jerry stuff for europe and the us for some time…
Regarding the much brighter heat signatures of the RH25 seen in this comparison, can the Jerry YM be adjusted to look the same by boosting the contrast? If you were to also boost the contrast of the RH25, does it then outperform the Jerry YM again?
That's what I was wondering during the comparison. Looked like all he needed to do was boost up the contrast a bit and it would be just as good as the pfalson/rh25. Sometimes I get the sense reviewers intentionally do this so they don't affect the sales of their "higher end" units that have more profit margins $$$.
We tested several different setting on both, the image is still more crisp on the PFN
@@falconclaw_ what's PFN?
@@victoryero4779 PFalcon 640+ is a thermal which we currently like the most, it comes at a slightly higher price point.
I think the smaller form factor and dedicated purpose is worth it, but if the lens protector introduces flare or artifacts then that is a problem. Will it accept other sacrificial lenses that have better light transmission?
This is a $5,800 optic... they try to gaslight buyers by putting "affordable" scope. They give this to youtubers' for free or practically free or cheap. No, thanks you can keep the Pfalcon 640+... There are better and cheaper thermal optic options
There are cheaper but not better ones, if you buy new this will outperform others in this price range, I have yet to see one that does. If you know of one let us know, we will try and make a comparison side-by-side.
I've seen this combo on the ksk
Isnt the mh25v2 exactly the same as the pfn 640+ in terms of image quality?
hi, love your videos! wich elbit is it, xlsh or omni?
Mate do you have the 384 and the 640 above the images displayed in the right order as the 384 on the left looks a lot better clarity
They are in the correct order yes, the 384 might seem better at some distances and heat signatures, it is also not 1x but more like 1.3x zoom baseline. The sensor in them is slightly different, the 384 has 384×288/17um and 640 640×512/12um so they identify some aspects differently.
I pre-ordered the holosun drs-th, really pumped to finally get it and check it out. Feel like it will be a good companion to my helmet mounted setup. Also, can't hear a damn thing in your video, super quite and muffled.
Where to buy
falconclaw.eu :D
thank you for the detailed video
Was fun making it, you learn alot in the testing process.
Could there be a way to use a magnified thermal on a flip to side mount to make the system more compact
That’s hustling backwards in quality
@@iamnotacriminalhow
They are 210.usd. Where did you get your number from.
Can I purchase from the USA 🇺🇸 ?
Yes :)
@@aesthetic8780 where?
Awesome!
Can only shoot 75 yards with that. Much better options for shooting at 150 yards for same or less money. Combat Infantryman here, and I know these things.
Shooting? What are you talking? You have it mounted on your helmet. Non sense comment.
I still think the RH25/Pfalcon640 is the best, unless the new steiner gen 2 beats it. One could argue these aren't "budget" though, but there aren't anything cheaper id run for a 4 in 1 thermal (weapon, clip on, helmet, handheld).
No argument there, PFN640 does perform better. Crisper image, better red hot(my fav) and probably more durable(have yet to break a YM tho). It does cost just a bit more and it not as user friendly, YM has most functions you want fast access to(zoom, color palette, etc) just a button combination away, with PFN you need to surf the menu for those.
@@falconclaw_ For sure. I hope the gen 2 has a better interface as it isn't fun going into the menu while using it. As for the price, I see it as if you are already spending thousands of dollars on something, a few thousand more to be happy with is worth it for me. Had a few times where I cheaped out on something, only to upgrade to what I originally wanted in the first place.
That Steiner C35 Gen2 doesn’t look like it’s rail mountable. Only for direct attachment to large objective scopes. If so, that’s going to really limit it’s use, and won’t really fall into the same category as other small multi-role thermals
@@rileyfrench3837 There are rail adapters for those style of clip ones, so I'm sure someone will make one for it if there isn't on already that works. www.optics-trade.eu/blog/wp-content/uploads/2022/09/A-special-rail-mounted-adapter-for-the-M35x1.0-thread-1024x576.jpg
Need it! 🔥
Why not get the Infiray Jerry C5 Clip-On?
Different image quality, detection range and use case, Jerry C5 is great for other things. Might see a video soon about this 😉
Can you use the Thermal on a gun with .308 Win too? Or ITS only for .223 recoil?
Each thermal device will have its own individual specs for what it's rated for , although 308 specifically is known for destroying electronics.
How does it compare with regard go Sidekick 640 with regard to FOV and clarity? Also, it looks "grey'd out", have you tuned the image settings or are you running it stock?
The image processing on the Jerry-YM seems to be better than the sidekick. The specs look the same but with thermals specs are not the only things that matter. We pick this over the Sidekick any day. What you see through the device and what the video recording looks like are a bit different, it does not look grey and it is a bit better clarity and quality.
@@falconclaw_looking to get either of these for my urbex activites. I move slowly actually slower than walking speed and use it only urbex activities so basically distances that you would describe as cqb or at most longer industrial hallways. What would you recommend of these to navigate with. I would love to have a thermal instead of night vision Btw in germany Mh25v2 Falcon 640+ jerry ym 2.0 Or maybe a pvs 7 What would you recommend?
@@valgo8128What? It's the exact opposite. Thermal and night vision is not the same. Not even close. You want a device for navigation. But you only noted thermal devices. This is not how it works. You need Night Vision for navigation and thermal for detection. I don't know if your comment was serious or not
I love to see thermal getting better and cheaper. More availability for the poors like me! Good stuff brother! 🤙🏼
I wish there was a EU / US competitor with similar price / value.
Highly likely that you will not see it happen, besides the components would still probably come from outside EU/US, only the price tag would be made in EU/US.
@@falconclaw_ Pulsar makes thermal in Lithuania with French sensors, for a lower price point than these Chinese manufacturers. I see no reason besides their own dumb brand identity why they couldn't make something like the PFN640+.
@joffeloff as soon as pulsar makes one I'll gladly buy it. The US market is flooded with rebranded Chinese thermals and they are intentionally price gouging us and manipulating the industry by withholding software features that are only available on international versions.
Does it come for pvs31s?
400$ 😂😂😂
They are 213.99 American.
Do a 4g vs harder gen3
When teaming with your friends goes to far
Too far? Nah. Just right
Thermals are awesome!
The video does not even do it justice, what you see firsthand through the device is even better.
I have had Breach few years. I have used Outdoor alert palette when on bridge with NV. How Jerry YM palettes fit this use?
As you see in this video the red hot mode is the equivalent of this and it is alot better. We have a detailed video coming out about the YM and you can see clearly how well it performs.
@@falconclaw_ Good to hear! May be time to start thinking how much can ask of low hours Breach 😂
Is that a new thing for the military? Sure you need both