Пікірлер

• 
  @aaronlemieux21594 сағат бұрын

  Granny shifting😭

• 
  @trailblogger4 сағат бұрын

  Perhaps lol

• 
  @D.hobbyist9 сағат бұрын

  what does it mean when my check engine light blinks 2 slow blinks then 2 more slow blinks

• 
  @trailblogger8 сағат бұрын

  22 code says intake air temperature sensor (open or closed)

• 
  @davidl932110 сағат бұрын

  What year is that

• 
  @xZCoDaZxКүн бұрын

  Where the new videos at??? 😭😭😭

• 
  @trailbloggerКүн бұрын

  Sorry had some things come up had to step away from the editing booth but i will get them posted soon. Thanks for the reminder i do appreciate it

• 
  @ChrisTaylor-xv2tc2 күн бұрын

  Oregon 12" 3 blade mulcher - destroys Bramble & Blackberry instantly. Part number 295507. Just bought one & am annoyed I didn't get one years ago!

• 
  @tonyverdin84164 күн бұрын

  Where is this trail at

• 
  @trailblogger3 күн бұрын

  Shasta chappie ohv area

• 
  @MikeAsbury-ti2yx5 күн бұрын

  Sounds very lean? go up 2 on main jet with aftermarket pipe it's missing lots of top end it's too lean wide open

• 
  @trailblogger5 күн бұрын

  Thanks for the suggestion

• 
  @trailridersandfun579811 күн бұрын

  Hey u still running single carb?

• 
  @trailblogger11 күн бұрын

  Yes still fed by a single carb in this vid

• 
  @trailridersandfun57989 күн бұрын

  @@trailblogger thinking on doing same setup on mine since I’ve start having issues with one of my carbs

• 
  @trailblogger5 күн бұрын

  @@trailridersandfun5798 great setup for the woods, I would keep dual carbs if you ride the dunes or wide open on flat ground a lot.

• 
  @trailridersandfun57985 күн бұрын

  @@trailblogger yeah i do more trail/wood riding sometimes wide open but just sometimes

• 
  @Validqt13 күн бұрын

  i need a atv

• 
  @trailblogger13 күн бұрын

  You should get one

• 
  @pedrofuentes898916 күн бұрын

  where did you get your graphic wrap @ I want something like that for my raptor as well looks awesome

• 
  @xXFrankieIrishXx16 күн бұрын

  Is the Thrush Washer supposed to spin?

• 
  @macpac380318 күн бұрын

  Does the ECU just pull out/Unplug?

• 
  @trailblogger18 күн бұрын

  Skip to 5:12 it is attached to a little metal bracket

• 
  @Re-liner_outdoors19 күн бұрын

  How have you liked the 2019 gears?

• 
  @trailblogger19 күн бұрын

  A little better probably would have gone lower. The alba 6 spring clutch is way better, engages like a true clutch should

• 
  @ortizcarrera20 күн бұрын

  Awesome Video !

• 
  @michaelbarlow606222 күн бұрын

  👍👍 good video and if it ever fails again it won’t be from lack of grease 😂

• 
  @trailblogger22 күн бұрын

  lol

• 
  @takchur123 күн бұрын

  My polaris is 740lbs, I don't think I'll be able to lift it like that 😢

• 
  @briand667124 күн бұрын

  If I made this same video, It would end sooner and the final shot would be a Big Box with All The Pieces in the Corner of My Garage. Thanks For the informational video !

• 
  @chrisw761227 күн бұрын

  Which petrol strimmer would you recommend new for blade attachment grass sick of this crappy snapping cords or plastic blade all the time

• 
  @trailblogger26 күн бұрын

  I like the echo line. This particular blade works on vines and young trees chutes but not the best at tall grasses

• 
  @user-gk1xq4dy7n27 күн бұрын

  How do u like the kenda bear claw tires thinking about getting a set for my raptor

• 
  @trailblogger27 күн бұрын

  Great traction but very bulky for a sport quad. A lot like the old spider tracs

• 
  @user-gk1xq4dy7n27 күн бұрын

  @@trailblogger thank u

• 
  @sn2bkngАй бұрын

  About to do mine it’s 112 tho waiting til dark

• 
  @trailbloggerАй бұрын

  Same it is like 110 F here now. In the video I had a portable swamp cooler setup outside lol

• 
  @sn2bkngАй бұрын

  @@trailbloggermines a 96 f350 have u done it yet? I’m dreading it

• 
  @trailbloggerАй бұрын

  @@sn2bkng yes i recorded this video

• 
  @xZCoDaZxАй бұрын

  You got the tune and tip on in this video? I suppose not since it sounds stock

• 
  @trailbloggerАй бұрын

  Bone stock here

• 
  @xZCoDaZxАй бұрын

  @@trailblogger Bro post that video with the tune! You’re killing me!! 😂😂😂 I bought a 2024 Grizzly so I’m hyped too

• 
  @trailbloggerАй бұрын

  @@xZCoDaZx i will soon sorry for the delay

• 
  @xZCoDaZxАй бұрын

  @@trailblogger That video better be up by tomorrow!!!! 😂

• 
  @trailbloggerАй бұрын

  @xZCoDaZx aye aye captain! lol

• 
  @imretoth2341Ай бұрын

  👍👎🤮🤮🤮

• 
  @trailbloggerАй бұрын

  Thanks for watching

• 
  @daryelthomas9414Ай бұрын

  I am paying a shop to do this as I write this. The 2019, a barnett clutch and the weller oil mod

• 
  @trailbloggerАй бұрын

  Oil mod is a good move i have heard

• 
  @daryelthomas9414Ай бұрын

  I will let you know when I get it back. How are the 19 gears, I am hoping to get as low as 3-4 mph in first without having to ride the clutch. Before it would start bogging at 6 mph

• 
  @trailbloggerАй бұрын

  It is definitely better but not as low as i was hoping it would be

• 
  @roydunn4649Ай бұрын

  Remember, unless you tear the roots out or spray them, they will come back

• 
  @trailbloggerАй бұрын

  Agreed, i dragged the whole thing with a scraper blade after this

• 
  @roydunn4649Ай бұрын

  @@trailblogger yeah, I work a PNW farm and fight Blackberries every year

• 
  @philirwin2028Ай бұрын

  Get a ratchet rake for the bucket. Will make short work of that brush. Dad had one of those tractors back in the 70's, good tractor.

• 
  @trailbloggerАй бұрын

  I will check those out, thank you

• 
  @shreksexy6879Ай бұрын

  That's proper July 4th celebration "Merica"!!

• 
  @do1yourself762Ай бұрын

  just trail riding

• 
  @keithhooper6123Ай бұрын

  Oregon make these blades in the USA,but I ha e seen on YT, that they cannot be sold in the USA! Seems strange.

• 
  @trailbloggerАй бұрын

  I recently found a link to some on amazon from another brand and added it to the video description at the bottom

• 
  @OdysseyOffroadАй бұрын

  Nothing like the smell of a new unit!

• 
  @MOSINDUSTRIALАй бұрын

  👍🥂👋

• 
  @rzl07375Ай бұрын

  King Quads are awesome reliable machines. He's gonna love it.

• 
  @trailbloggerАй бұрын

  I kinda wish i had got one instead of my grizzly atv but i do love the yamaha

• 
  @rzl07375Ай бұрын

  @@trailblogger As a Yamaha guy myself....I'd buy the King quad. The build quality is exceptional and a few minor mods really bring them to life.

• 
  @trailbloggerАй бұрын

  @@rzl07375 will it loft the front end up from a dead stop just going full throttle with your weight at the back of the seat?

• 
  @rzl07375Ай бұрын

  @@trailblogger With a clutch shim installed it should.

• 
  @trailbloggerАй бұрын

  I havent rode the king quad yet but my grizz lifts the front and is surprisingly smooth to jump for a flying couch!

• 
  @CourtJ_ml9toАй бұрын

  Repack those silencers 🙉

• 
  @trailbloggerАй бұрын

  Lol it could probably use a repack but I did just do them not long ago

• 
  @CourtJ_ml9toАй бұрын

  @@trailblogger well plz consider the small silencers for ☝️and for 🤘it’s KILLING MY EARS and I have to have “ear plugs” at work!!! Lol

• 
  @trailbloggerАй бұрын

  Noted sir I will give then a fresh repack. This is an older video they have been done a few times since

• 
  @CourtJ_ml9toАй бұрын

  @@trailblogger understand and to add, home insulation works as the same if not better because u can wrap the tubes with MORE MATERIAL and a TIGHTER fit on smaller(all) silencers.

• 
  @xZCoDaZxАй бұрын

  Any mods on the Grizzly in this video?

• 
  @trailbloggerАй бұрын

  Bone stock in this video but I have some footage come up soon with a tune and tip

• 
  @xZCoDaZxАй бұрын

  @@trailblogger Okay awesome good to hear!

• 
  @devinhinds8657Ай бұрын

  This hurt me a little. Gotta shift n let the motor do its thing. Raptor love 🤘🤘

• 
  @trailbloggerАй бұрын

  nah I've seen you ride I wasn't impressed lol

• 
  @devinhinds8657Ай бұрын

  Shift. She likes it low.

• 
  @samuelrivas3943Ай бұрын

  Your differential didn't leak after pulling the axles from the tubes?

• 
  @trailbloggerАй бұрын

  Not that I recall no. Maybe I should check that fluid

• 
  @samuelrivas3943Ай бұрын

  @@trailblogger I'm curious, right now I have a situation where it leaks on one side and I really cant afford doing both sides right now. I'm wondering if i can pull the axle out on the side that's not leaking in order to change the inner axle seals on my differential, or if I'll HAVE TO change both at the same time. For this job, I worry it'll be a waste if I don't change BOTH of those inner seals. I'm already changing a lower ball joint, on one side only. Basically, both axles have to be removed, or at least pulled out of the differential, for the ring gear to come out and change the seals. I've already got one seal, but I worry the other will tear if I remove it, then I'll fix the side that was leaking but create the same problem on the other side. On mine, I could smell gear oil on the hub. It's all wet/grimy all around the hub and the knuckle What happened, I went to change a single lower ball joint, and to my horror discovered not only my inner axle seals on the differential were leaking, but the oil already destroyed the rubber in my vacuum seal, and was getting all into my hub bearing. I'm working on a 2000 SD 4X4. I like your video, but I'm a little surprised you didn't do the inner axle oil seals inside the differential, as mine is leaking without even pulling the shaft (also 320k miles).

• 
  @samuelrivas3943Ай бұрын

  @@trailblogger I'd love to know if yours ever leaked. If they didn't, there's a good chance I'll get away with pulling the axle just enough to be able to remove and install the two inner diff axle oil seals, and i can save the ball joints on the other side for another time

• 
  @trailbloggerАй бұрын

  @@samuelrivas3943 if it did, it was very little. it very well could have dripped some on the gravel and I just didnt notice late at night working in the dark with a flash light. I have never done the diff fluids on this truck. feeling like it would be a good time to check it now lol

• 
  @Breck_VАй бұрын

  Is it still 54 foot pounds of torque for all warriors for the front sprocket?

• 
  @derekdamned1Ай бұрын

  So this is learning how to be a bitch? Ride it like you stole it!

• 
  @drome0103812 ай бұрын

  Okay, willing to share how the moog hub assemblies are holding up? Got all the parts but was holding off on the hubs. Thinking I should do them while I have it all apart. But dont want to fork out another 6-700 for Timkens or motorcraft but want quality.

• 
  @trailblogger2 ай бұрын

  So far so good! All components have held up good. She drives nice and straight, I can drive it down the road with one finger on the wheel. I did have to replace my hydro booster recently, not sure if it was due to the tight steering components and larger tires but we are back on the road now

• 
  @RaptorWRLD2 ай бұрын

  🤘

• 
  @JosueOtero-zq2fi2 ай бұрын

  You can put the link from where you bought it, thank you

• 
  @jeremytuggle64242 ай бұрын

  Thank you for the credit! I just had time to watch this installment. Great video, my friend. If you need anything else let me know.

• 
  @trailblogger2 ай бұрын

  Thanks for allowing me to borrow your clip and i hope you are feeling better after being down for so long

• 
  @codysiegrist45032 ай бұрын

  How does the grizzly compare to the raptor? Could you see yourself owning just the grizzly?

• 
  @trailblogger2 ай бұрын

  I love the raptor but the banshee still my baby lol all are fun in different ways. For a long, long ride deep into the jungle grizzly is sure convenient. Need more seat time with mods to know for sure.

• 
  @Palomino4882 ай бұрын

  Nice area to ride! Very cool seeing the old mining relics and vintage photos. Are there any other parts of the old mining operation accessible by ATV?

• 
  @trailblogger2 ай бұрын

  There are old mines all over the place a few you can still go in. Bulldozer in the side of the cliff. Mainly just old road and some foundations

• 
  @DPMechanical12 ай бұрын

  Awesome video do you prefer the raptor or the grizzly for trail riding?

• 
  @trailblogger2 ай бұрын

  They are both great machines the grizz is growing on me, super comfortable smooth ride. Wish it had a regular sport clutch

• 
  @here_to_watch21152 ай бұрын

  Theyre intentionally designed to fit in a truck bed.

• 
  @froggysvk7872 ай бұрын

  love this type of videos !!!

• 
  @trailblogger2 ай бұрын

  Love these type of comments :-) thanks for watching friend

• 
  @BoBBy_Loko2 ай бұрын

  Don’t let go of gas when shifting next time!!

• 
  @darrentylor54732 ай бұрын

  Really sad day as I found the turbo charger was the cause of my oil leak. It was hemorrhaging oil through the pedestal, blew a seal and started force feeding the intake oil... now I get to eat some crow...

• 
  @trailblogger2 ай бұрын

  Time to dig in!

• 
  @raptorider832 ай бұрын

  Grizzly is a ripper bro.. I might have to go look at um.

• 
  @trailblogger2 ай бұрын

  And this was when it was stock! Tune and pipe tip opened her up big time