Пікірлер

• 
  @appleblows16 сағат бұрын

  I thought Klein tools were made here in the US of A.

• 
  @projectpinehills5 сағат бұрын

  Some are, like lineman pliers and diagonal cutters. Thanks for watching!

• 
  @Siresly6 сағат бұрын

  Looks like a simultaneous upgrade and downgrade. The UI and side panel seem like pure upgrades. Less so the case with the weaker and cooler light with less flood, the shorter runtimes, no powerbank, worse clip, lower IP rating.

• 
  @projectpinehills4 сағат бұрын

  I’d like to see the IIF23 with the updated RGB. Thanks for the feedback and thanks for watching!

• 
  @SamIAm-uk1pp17 сағат бұрын

  I have a pass-through. I would not want to give up my standard rachets, but there are times when the pass-through is the only tool that will get the job done. Sometimes, you can use either one, but the pass-through is easier. Other times, it doesn't do as good a job. Sure would not want to give it up, though!

• 
  @projectpinehills12 сағат бұрын

  Good point. It can come in handy. Thanks for watching!

• 
  @russgaddy18 сағат бұрын

  This is what I have been looking for. It may cost me $500, but I'm going to build this exact same pouch.

• 
  @projectpinehills18 сағат бұрын

  That’s good to hear. Links are in the description of the video. Thanks for watching!

• 
  @kennthbrowne705122 сағат бұрын

  That cool but if build your power banks do much better this what i did i have few milwaukee lithium battery 1 12A,2 5A and 1 3A Lithium battery with 800 watts inverter 60Hz 8A 12Volt 110AC outlet with 36,48,60,72V DC converter to 12V 10A out put with 3 usb port 5 switch in tool box and volt meter lol i do much better on it more buying that

• 
  @projectpinehills12 сағат бұрын

  How do those batteries connect to the inverter?

• 
  @isaacstrade935822 сағат бұрын

  So Milwaukee is made more for soft hands is what your saying

• 
  @projectpinehills22 сағат бұрын

  I don’t recall saying that but thanks for watching!

• 
  @joshuasechter5306Күн бұрын

  Knipex

• 
  @projectpinehills23 сағат бұрын

  Yes. Thanks for watching!

• 
  @HWCismКүн бұрын

  Very interesting, thanks

• 
  @projectpinehillsКүн бұрын

  Thanks and thanks for watching!

• 
  @edsherwook51962 күн бұрын

  Like the Klein. I’m starting to look like a fangirl with all the Klein crap I got. They make good stuff and an amarican company

• 
  @projectpinehills2 күн бұрын

  Ha, it’s a great light. Thanks for watching!

• 
  @nixland3 күн бұрын

  Thank you for the review. So the Dewalt will stop screwing if it reach maximum torque? I am looking for that kind of cordless screwdriver. I have one (non dewalt) but it keeps screwing when it reach max and damaging the screws.

• 
  @projectpinehills3 күн бұрын

  The DeWalt will stop but you can also set the clutch to stop at your desired torque. Thanks for watching!

• 
  @nixland3 күн бұрын

  @@projectpinehills thank you

• 
  @Talentman183 күн бұрын

  Thank you!

• 
  @projectpinehills3 күн бұрын

  Thanks for watching!

• 
  @edsherwook51963 күн бұрын

  Man it would be nice to have a 7/16 and 9/16 on the same socket

• 
  @projectpinehills3 күн бұрын

  Yes it would, good point. Thanks for watching!

• 
  @JPC3263 күн бұрын

  Do any of them have a timer function ?

• 
  @thicok45553 күн бұрын

  I’ve had the Klein and the Milwaukee. The Klein broke sadly after a year the springs around each of the sockets that retain it onto the screwdriver Completely came off I only had the Milwaukee for around a month, but I’m hoping to have better luck.

• 
  @projectpinehills3 күн бұрын

  Thanks for the feedback and thanks for watching!

• 
  @jasonvandervalk36794 күн бұрын

  I've had my eye on this set. Now that I've seen it work I want it after watching your video.

• 
  @projectpinehills4 күн бұрын

  Check out the updated video I have for this. Thanks for watching!

• 
  @platoscavealum9024 күн бұрын

  👍

• 
  @projectpinehills4 күн бұрын

  Thanks for watching!

• 
  @thebackwoodsmechanic50294 күн бұрын

  I prefer Channellock WideAzz adjustable wrenches

• 
  @projectpinehills4 күн бұрын

  Have you tried both? Thanks for watching!

• 
  @Aimsport-video4 күн бұрын

  Ratcheting on mine stopped working on the first day.

• 
  @projectpinehills4 күн бұрын

  That’s odd, how did the replacement work for you?

• 
  @Aimsport-video4 күн бұрын

  @@projectpinehills well, fidgeting with the handle alone, changing the setting to forward and reverse repeatedly with no effect for 10min, ended up just working again. Still don’t know what the magic combo was to get it working. First fail of a Klien tool that wasn’t due to an absurdely severe use case.

• 
  @bosesebi66854 күн бұрын

  my womax long nose curved nose, and elongated handle, 28 cm, pliers, weigh 300 grams.

• 
  @projectpinehills3 күн бұрын

  Yeah… what are you saying?

• 
  @bosesebi66853 күн бұрын

  @@projectpinehills too heavy, especially if for fishing

• 
  @misterm70865 күн бұрын

  I agree

• 
  @Android_Warrior5 күн бұрын

  Klein also has a Metric one.

• 
  @projectpinehills5 күн бұрын

  Yes, we talk about the metric version in the channel. Thanks for watching!

• 
  @Android_Warrior5 күн бұрын

  Klein all the way baby!!!!!!!

• 
  @TinShackVideos5 күн бұрын

  The 16/18 should be discarded for a 17/19

• 
  @projectpinehills5 күн бұрын

  Thanks for the feedback and thanks for watching!

• 
  @TopDog87626 күн бұрын

  Get the IF24 Pro, even better. 😉

• 
  @projectpinehills6 күн бұрын

  I’m getting it! Thanks for watching!

• 
  @marcrj81116 күн бұрын

  First time on your channel: One of the best and realist EDC videos. Just enough wording and finally a clear concise list. Really liked it!

• 
  @projectpinehills6 күн бұрын

  Thanks for the feedback, much appreciated. I did put some effort into this. Thanks for watching!

• 
  @Countryboy0717 күн бұрын

  Great video. Ive recently purchased the spanker elite excel tool/edc pouch. Similar in some ways but prefer the layout better. Its always interesting to see what other people carry. The Makita socket and drive set looks good. My next buy ! 👍

• 
  @projectpinehills7 күн бұрын

  Thanks, those pouch’s look nice. Thanks for watching!

• 
  @NullZero1647 күн бұрын

  this tool has come in clutch several times, and for the price. *chefs kiss*

• 
  @projectpinehills7 күн бұрын

  Same here, very handy. Used it on some torx screws recently that had no other way of accessing.

• 
  @CedGuru8 күн бұрын

  Elle est magnifique

• 
  @docfate8 күн бұрын

  Bad Marketing is what kills a brand. Look at how Milwaukee markets their tools..

• 
  @projectpinehills8 күн бұрын

  Yes it can. Thanks for watching!

• 
  @jmo40268 күн бұрын

  Very nice thought out kit. Thanks foot the ideas

• 
  @projectpinehills8 күн бұрын

  Thank you for the feedback and thanks for watching!

• 
  @NeilTapia8 күн бұрын

  Getting it

• 
  @projectpinehills8 күн бұрын

  Nice! Thanks for watching!

• 
  @oxenwolf33469 күн бұрын

  Interesting that you pick the M12 saw over the si ilar M18… that kinda cnfused me

• 
  @projectpinehills8 күн бұрын

  Both are great. The m12 is packed with power for its size. Comes down to the size you prefer/need. Thanks for the feedback.

• 
  @pizza4breakfast3529 күн бұрын

  It’s so good I bought 3 lol

• 
  @projectpinehills9 күн бұрын

  Thanks for watching!

• 
  @jeepguylv809 күн бұрын

  I like these types of tools, going to try them out and see if they hold up. anytime I can save space is a good thing, now I can retire my 2 nut driver sets to my garage tool box and gain some space in my truck.

• 
  @projectpinehills9 күн бұрын

  Thanks for watching!

• 
  @Judge_Jej9 күн бұрын

  Good video, I've been using my MCT professionally for 4 years now and it's time to retire it to home duty.

• 
  @projectpinehills9 күн бұрын

  Thanks and thanks for watching!

• 
  @ynnhoj9129 күн бұрын

  Great review! Ive subbed

• 
  @projectpinehills9 күн бұрын

  Awesome, Thank You!

• 
  @nmmj325310 күн бұрын

  buen video

• 
  @projectpinehills10 күн бұрын

  Thanks and muchas gracias for watching!

• 
  @leonart787510 күн бұрын

  Hey what about amps , does it test amps?

• 
  @projectpinehills10 күн бұрын

  No, just volts. Amps would require a lot more size to the meter. I like clamp meters for testing amps. Thanks for watching!

• 
  @johnurban733310 күн бұрын

  My stopped working after using it once. Won’t charge or turn on

• 
  @projectpinehills10 күн бұрын

  That’s odd. Make sure the battery cap is in tight. Return it for replacement. Thanks for watching!

• 
  @johnurban733310 күн бұрын

  @@projectpinehills The battery cap is tight. Can’t bring it back because I didn’t need to use it when I bought it so too much time has passed.

• 
  @TheCricket197610 күн бұрын

  What is the grey bit holder / set?

• 
  @projectpinehills10 күн бұрын

  That’s a Klein Tools bit set. Thanks for watching!

• 
  @aeonjoey3d10 күн бұрын

  I’m over here with surprised pikachu face. I’m wondering if they patented it or if others will come out with gyroscopic as well. Really dig the variable speed. Very impressive

• 
  @projectpinehills10 күн бұрын

  They have had it for years without anyone copying it yet. Thanks for watching!

• 
  @berniehumphrey986111 күн бұрын

  What type and how does the magnet attach?

• 
  @projectpinehills10 күн бұрын

  Thanks for the feedback. The magnet consists of 2 magnets. One on the outside of the bag and one on the inside. They attract together and hold in place wherever you want them. Link in the description. Thanks for watching!

• 
  @berniehumphrey986111 күн бұрын

  Have some info on the magnet and how it attached to the pouch? Great video

• 
  @projectpinehills10 күн бұрын

  Thanks for the feedback. The magnet consists of 2 magnets. One on the outside of the bag and one on the inside. They attract together and hold in place wherever you want them. Link in the description. Thanks for watching!

• 
  @enjaymarine11 күн бұрын

  We LIKE the look of your Klein Tools Ratcheting Quadwrench Set - but is there a Metric version from Klein yet..? If so, what is the model number..?

• 
  @projectpinehills11 күн бұрын

  Not yet, stay tuned. Thanks for watching!

• 
  @danialtun543111 күн бұрын

  DeWalt DCF 680 N-2 is i like it but our Asian online Lazada shoppe don't have they have DeWalt 008 only Loong side

• 
  @projectpinehills9 күн бұрын

  I’m not familiar with the 008. Thanks for watching!

• 
  @robertcoffey163611 күн бұрын

  Great video, im curious if bigger the battery if brighter the light?

• 
  @projectpinehills11 күн бұрын

  No correlation, thanks for watching!

• 
  @jimwebber745111 күн бұрын

  I bought a pair of these today for my harbor freight daytona 3 ton jack stands. They are very loose fitting and flop around all over. Disappointed and bringing them back.

• 
  @projectpinehills11 күн бұрын

  That’s odd. I have some newer Daytonas and they fit well.

• 
  @tgsparkyoriginal12 күн бұрын

  I wish they would bring more out in metric

• 
  @projectpinehills12 күн бұрын

  They may be working on it.

• 
  @3vil3lvis12 күн бұрын

  These are nice, but I wish they made impact nano flip sockets in 3/8 and 1/2 drive metrich style.

• 
  @projectpinehills12 күн бұрын

  Thanks for the feedback and Thanks for watching!

• 
  @3vil3lvis12 күн бұрын

  @@projectpinehills The difference between the 7 and the 9 piece set is 1 flip socket and $10, when you already have the 7 its a hard sell for an extra socket.

• 
  @pointnozzleaway13 күн бұрын

  Awesome. I got a deal on the M18 Hackzall ...Had to do it ! I like that M12 surge though !

• 
  @projectpinehills13 күн бұрын

  That’s a good deal! Thanks for watching!