Пікірлер

• 
  @gillesg.41849 күн бұрын

  Hi Tim. I just installed the 86140-YV010 unit. Do you happen to know where to find the firmware updates

• 
  @TimsElectronicsLab2 күн бұрын

  Nice! No I don't, if you happen to find it, let me know

• 
  @bauldetodo609812 күн бұрын

  Gran material, buen video. Gracias! 😀👍👍

• 
  @jimmace839616 күн бұрын

  I have this joystick and I like it I play SWG Legends but recently its twist function is moving by itself in space you twist the stick to rotate your ship but my ship is rotating without my hand on the stick is it possible to fix this

• 
  @Falcon10917 күн бұрын

  Got the same drive... belt is total unflexible and broken. I order a new one. :-) On 16:14 you remove the front cover and the upper part of the drive to get access to the belt. Holy shit, on my drive it don't was comming easy out. The magnetic head was in the way...

• 
  @svend9878Ай бұрын

  Hello, i have a question about the usb part of the video, my (2019 Aygo) doest seem to have the little box you pulled the usb cable out, could this be located elsewhere?

• 
  @picolocoloАй бұрын

  nice!

• 
  @arnolan-uАй бұрын

  Ik zit met hetzelfde probleem. Al een oplossing gevonden?

• 
  @alextetens632Ай бұрын

  Link to the screen 86140-YV020?

• 
  @TimsElectronicsLabАй бұрын

  letmegooglethat.com/?q=86140-yv020

• 
  @elishanurse161Ай бұрын

  Hi, I have a a puegot 108 allure it also has a reverse cam, if I was to do this would I still get the visual for my reverse cam? I’m a bit unsure so sorry if it seems like a dumb question lol

• 
  @TimsElectronicsLabАй бұрын

  Yes that still works!

• 
  @harold4113Ай бұрын

  Is deze guide Rooting Toon nog actief?

• 
  @arnaudj2708Ай бұрын

  Super interesting

• 
  @mty19192 ай бұрын

  Anyone link of the unit itself??

• 
  @remon1496nl2 ай бұрын

  Hah, grappig dat er zoveel mensen zijn gaan upgraden! Ooit het draadje aangemaakt op een Toyota-forum. Volgens mij zijn er al erg veel overgezet inmiddels. :)

• 
  @mnetjes95202 ай бұрын

  Kraan met stoom apparaat schoon gemaakt ,dat gaat dus niet ,nu ook storing .Heeft het zin om de kraan uit elkaar te halen en schoon te maken?

• 
  @pepijnApaans2 ай бұрын

  Worked like a charm! The usb-hub behind the head unit in my peugeot 108 was turned with its face towards the front of the car (I noticed because I saw screws facing me, and the USB on the right-side of the usb-hub was positioned more towards the the top of the usb-hub instead of the bottom like in the video), so I had to unplug the bottom-left instead of top-left USB and redirect it! Please beware of this potential detail everyone :)!

• 
  @jaffargumer2 ай бұрын

  So i have same car with buttons in the steering wheel but I have a radio with Bluetooth and I can see that it is the same plate around the screen. Can I buy a screen with three buttons (CarPlay) and plug and play? I can send you picture of my radio from behind

• 
  @jaffargumer2 ай бұрын

  I can see on 3:37 that I don’t have the small white clips on the top right corner with the red wire. What does that one do

• 
  @pepijnApaans2 ай бұрын

  Hi Tim , what do you do with the USB that was previously connected to the head unit? Just leave it unplugged?

• 
  @TimsElectronicsLab2 ай бұрын

  That needs to be plugged back in, but without the hub in between

• 
  @pepijnApaans2 ай бұрын

  @@TimsElectronicsLab sorry I was not clear. So I mean the cable coming from the hub, that was previously connected to the head unit. That cable was disconnected from the head unit, before rerouting the cable coming from the USB port, which is plugged into the head unit directly now. My question is: what is done with the cable that you unplug from the head unit (the one that comes out of the hub)

• 
  @TimsElectronicsLab2 ай бұрын

  You can leave that unplugged and dangling behind the head unit without any worries

• 
  @damny0utoobe2 ай бұрын

  This got me into ghidra

• 
  @giantkherva21413 ай бұрын

  Can you decode atmega88 hex file in human redable lunguage? I will pay for it.

• 
  @kristiangramkrogh3 ай бұрын

  Hi, Great video! I have a Quooker where the PCB is broken. Im considering adding a simple switch for control, but I cannot find any pinout for the jack. Can you share yours? Cheers, Kristian

• 
  @TimsElectronicsLab3 ай бұрын

  Yes! I've found one on tweakers: gathering.tweakers.net/forum/list_messages/2081612

• 
  @zwollywoodNL3 ай бұрын

  You saved my Toon with the reset button issue. Toon has been reanimated.

• 
  @chrizzp20873 ай бұрын

  Hi Tim, thanks for spreading the news. I hadn't found the time to translate the video. But that seems redundant now ;) Please give me a ping when the pcb's are in. My quooker broke once more. The microcracks turned out to be unrepairable. Cheers Chris

• 
  @jaspervanderveenvdvmedia88854 ай бұрын

  Possible to do this process with a regular radio w bluetooth function? So not the touchscreen but radio with buttons

• 
  @TimsElectronicsLab4 ай бұрын

  You definitely need to get another shroud for the radio if you'd going to give that a try. Do you have steering wheel buttons? If so, I think it should be possible

• 
  @jaspervanderveenvdvmedia88854 ай бұрын

  @@TimsElectronicsLab Ja klopt! Knoppen op t stuur indd. Wat bedoel je met shroud?

• 
  @TimsElectronicsLab4 ай бұрын

  It might be that the face plate around the radio itself needs to be changed

• 
  @GerardFicker4 ай бұрын

  ik heb ook een toon die ik wil rooten maar ben helaas niet zo technisch aan gelegd, nu zoek ik iemand die dit voor mij kan en wil doen . ps ik kom uit de buurt van Venlo

• 
  @SibeJanKramer4 ай бұрын

  What is the best solution to use to solve stiffness of the lever? Is it to the completely immerse the dismantled part in cleaning vinegar? Ot use WD40? Glassex? Special fluids of oils?

• 
  @TimsElectronicsLab4 ай бұрын

  I think that vinegar will work the best as that'll dissolve the calic

• 
  @SibeJanKramer4 ай бұрын

  ​@@TimsElectronicsLab I beleived there's grease or oil inside somewhere as well. Not sure of that's a good combination with vinegar. (And did I mention you're great taking the time explaining how to fix things? However: you're great!)

• 
  @TimsElectronicsLab4 ай бұрын

  @SibeJanKramer it cleaned up very well on mine. By the way, you can take the coper insert, which the tap handle screws into, apart to clean it properly. Thanks for your kind response! Much appreciated!

• 
  @casimirextreme4 ай бұрын

  Will this also work on the Belgian (Engie) Toon version in 2024?

• 
  @TimsElectronicsLab4 ай бұрын

  Actually, I've got no idea. You could ask the developers of the rooting scripts if they have tested it

• 
  @christianrud47044 ай бұрын

  Hey, have you received any feedback from Quooker yet?

• 
  @TimsElectronicsLab4 ай бұрын

  Yes I have, they won't supply another PCB. I've just placed an order for DIY replacement PCBs. I'll create a new video once those arrive

• 
  @JakeBrumby2 ай бұрын

  Thanks Tim, looking forward to the next video to see the final repair!

• 
  @TimsElectronicsLab2 ай бұрын

  I've received the PCBs and they work, but don't fit yet. Update will have to wait

• 
  @arnolan-uАй бұрын

  @@TimsElectronicsLab thanks for sharing. Quooker is so unhelpful ! They want me and many others like Me with the same problem to buy a new quooker service is so bad 😡. Looking forward to hearing more about the pcb you ordered. Many quooker owners will love a solution 🎉.

• 
  @TimsElectronicsLabАй бұрын

  @arnolangevoort2141 well I haven't gotten the knob detection to work just yet. Still figuring that out, so everything will be delayed a little

• 
  @ravishankarkumar50824 ай бұрын

  Which platform is good for buy load cell frame? Not load cell, please 🙏 reply if any platform is exist

• 
  @yasss-4 ай бұрын

  Anyone has the link to buy this ps ??

• 
  @yasss-4 ай бұрын

  Hebt u toevallig de link van waar moet ik dit kopen ???

• 
  @aroncaleb1005 ай бұрын

  I give up, I've tried at least 10 times and I always get the same words.....no CD/DVD drive.(2)😢😢😢😭😭😭😭..... I think I won't be able to use it anymore😢😢

• 
  @fenmadeveloper45415 ай бұрын

  Is this still working?

• 
  @TheNeo5125 ай бұрын

  Hi. Thanks for the Video. Can you tell me where i can find the Pinout?

• 
  @TimsElectronicsLab3 ай бұрын

  You can find the pinout here: gathering.tweakers.net/forum/list_messages/2081612

• 
  @musolini525 ай бұрын

  Hoi tim mooi video, maar toon2 kun je dus in principe ook alleen met usb rooten? Scherm hoeft dus niet meer uit en geen soldeerwerk?

• 
  @mehmetarifartan56335 ай бұрын

  teşekkürler

• 
  @mainsail49596 ай бұрын

  Thanks so much!

• 
  @Boco20086 ай бұрын

  Top video! Ik kan verbinding maken met SSH met de Toon maar welke commando's gebruik je voor de update van de firmware van de Toon en de installatie van TSC? update-rooted.sh geeft een "not found" error? Thanks!

• 
  @user-nu2py9ds8i6 ай бұрын

  Thanks for the instructive video! It's been a big help. After closer inspection, what do you suggest to be the best way to take the ring off? I don't want to break the plastic ring holding it in place.

• 
  @TimsElectronicsLab6 ай бұрын

  Thanks for your kind comment! Are you referring to the boiling water ring?

• 
  @user-nu2py9ds8i6 ай бұрын

  Yes. You take it of by force and it sounds like you crack the black ring which is keeping it in place. Knowing now how it is retained, how would you suggest to take it off?

• 
  @TimsElectronicsLab6 ай бұрын

  @@user-nu2py9ds8i I just had a look at the remnants of my Quooker and there doesn't seem to be any broken plastic ring. I think it was just a bit calcic causing the sound

• 
  @user-nu2py9ds8i6 ай бұрын

  Thanks a million for checking Tim! I still wonder what keeps the boiling ring in place, to prevent it from popping off under normal circumstances. But if you got it off in one piece, that must be the way to go.

• 
  @declutter665 ай бұрын

  The black plastic ring which keeps the large metal ring in place can be removed by using a scalpel or thin knife at one of the ring ends (it is a splitted ring with approx 1 cm space between its ends). Carefully twist the knife to lift the ring end so that it can be moved free from the body. A pair of fine tweezers may help.@@user-nu2py9ds8i

• 
  @kenanbicercicekdagbicer93086 ай бұрын

  1 adet pil yeterli omadı amper düşük geldi Ben 2 adet 18650 paralel bağladım harika oldu . Teşekkür ederim

• 
  @kenanbicercicekdagbicer93086 ай бұрын

  2 adet 18650 pili paralel mi bağladın

• 
  @mansoora.73226 ай бұрын

  I got another version of Liitokala charger that looks pretty much similar to yours including the circuit. I used it for testing the capacity of 18650 batteries. It did go well testing around 50-60 batteries I extracted from an electric scooter. One of the resistors of the 3rd channel got fried up, R330. There are 4 R330 SMD Resistors. Once this resistor got burned, channel 3 cannot be used for testing the capacity anymore. Though, channel 3 charges but the odd thing hangs up at 99% and never ends the charge cycle. I know this sounds I've got a bad battery, but no, it was the charger. And hell yeah, this charger gets hot overtime especially considering that a capacity test at 500 mAh takes a long time, for 2500-2600 mAh batteries around 5 hrs. Why they didn't just stuff a fan!

• 
  @TimsElectronicsLab6 ай бұрын

  Are you planning to replace the resistor? I'm guessing it got too hot and burned out

• 
  @mansoora.73226 ай бұрын

  @@TimsElectronicsLab Not now. I just found the Litiokala charger that I have is inconveniente for my use. I test hundreds of cells. Though, I added a fan to it and bought more testing equipment and chargers/dischargers. I wouldn't personally recommend such chargers/dischargers that come without any proper heat dissipation for testing a lot of cells. Overall, it worked fine and I tested quite enough of cells before it failed.

• 
  @aroncaleb1006 ай бұрын

  hi, tell me something, what are the resistors for, is it not the same as soldering the cables directly to the points without the resistors???, thanks in advance.and why i can't use another dvd-rom

• 
  @hringnalda6 ай бұрын

  Hey Tim, my toon is in a bootloop. it's a version 1 is there a fix for this ? Is there a way to reset it somehow ? Thanks in advance for helping me.

• 
  @tonyhong206 ай бұрын

  i can't believe that someone's made a video about something this specific! i had this same issue with a OnePlus 11 and attempted this fix with a 25V 47uF cap i had lying around. unfortunately it didn't solve the problem. my unit also has a very loud coil whine depending what's plugged in. a power bank attempted to draw over 1.5A and the unit flickered while the voltage drooped. phone did the same as yours while repeatedly making a high pitched whine. however, a USB light strip and an old micro USB powered smartphone were both able to draw 1A stably and quietly. i think my unit is just defective and while USB output would be a nice feature for emergencies, i have far better power banks in the unlikely event that i need them. ive seen cheap 18650 power bank cases that can even do USB-PD

• 
  @TimsElectronicsLab6 ай бұрын

  Thanks for your kind comment! I love the charging feature of this device, but indeed, the USB charging feature is kind off broken from the factory. Are the batteries of the PD powerbank you mentioned swappable?

• 
  @LeonTieu6 ай бұрын

  I wonder if the machine is still working well? Can it be charged using a normal micro usb port? (green light indicator when fully charged?) Thank you

• 
  @TimsElectronicsLab6 ай бұрын

  Hi! Yes, it will be charged using the micro usb connection. The software will even show the battery state now

• 
  @LeonTieu6 ай бұрын

  @@TimsElectronicsLab That's great to know, thank you. I ordered one but it seems to be the same type that doesn't have a built-in battery like yours. I will follow your instructions, have a nice day

• 
  @Tibo05516 ай бұрын

  Thank you , it was good and clear!!

• 
  @newrez6 ай бұрын

  Will these drives also play original disks once the firmware has been flashed?

• 
  @TimsElectronicsLab6 ай бұрын

  Yes it will!

• 
  @rasiedoemar78967 ай бұрын

  ik krijg het opzetten van de wifi router op Raspberry met debian Buster niet voor elkaar... is er iemand die me hiermee kan helpen...

• 
  @user-qg1wh2xz4h7 ай бұрын

  How do you get random activation codes? I cant find any