Пікірлер

• 
  @bitchesbecrazyable15 күн бұрын

  Where do you find parts? I have been having a hard time finding any available parts for my quad runner

• 
  @AlexSherbukАй бұрын

  You need to show how to actually change the spark plug and the oil

• 
  @d.r.ledbetter2286Ай бұрын

  Just a question about those pads that you took out. Are they the air bladders for the seat??

• 
  @twlyons1Ай бұрын

  ALWAYS PUT ON BIG WHEEL AND THEN OVER THE DRIVE PULLEY !!! the drive pulley is open up all ready, the driven wheel will open up letting the belt slide down.

• 
  @alfiegeo17812 ай бұрын

  You timelapsed right over the part I needed to see good job pooping

• 
  @MichealYurkinas2 ай бұрын

  Any way we could chat off youtube i have a 83 225 wheeler and it just died im habds deep right now

• 
  @loganlovescarsandmotorcycles2 ай бұрын

  I haven't seen one of those Suzuki before. It's nice. I saw a Goldwing with 200thousand km.

• 
  @jameskwak31982 ай бұрын

  Nice old bike glad you saved it

• 
  @kurtak94522 ай бұрын

  Great video, I am in the middle of re-assembly and wanted to see how you did it. Suzuki book reads 83 foot pounds for the drive wheel nut.

• 
  @dave21606662 ай бұрын

  Any idea what I can do to feed up frozen front forks? Are they repairable?

• 
  @dave21606662 ай бұрын

  Anyideas of what you use for air filter cage and filter?

• 
  @dave21606662 ай бұрын

  Wish you gave all part numbers of each part

• 
  @rustednutrepair6752 ай бұрын

  We go over this a lot in our videos, we use Partzilla for OEM part numbers, and to cross reference fitment on other models. Then we find on eBay or Amazon, depending on the part and the build. Hopefully that helps. Thanks for watching!

• 
  @adamelsaesser72942 ай бұрын

  What cv boots are those? Can you post a link??

• 
  @anonimous24513 ай бұрын

  Absolutely the FIRST THING you should od is remove those stator killers and give em to the owner and tell him to NEVER put em back on. Randakk's has an oil filter adapter plate to covert that canister to a spin on oil filter. I have one on my 83 Gold Wing. Makes oil filter changes a breeze.

• 
  @canbey30423 ай бұрын

  Hello brother, i have really much problem about muffler covers on original exhaust. Can u make a video about how we can take it off

• 
  @kennithjaramillo64083 ай бұрын

  Could you please post the link to the rebuild kit?

• 
  @rustednutrepair6753 ай бұрын

  I believe we bought Timberwolf recoil rebuild kits from Amazon. Thanks for watching!

• 
  @dougbogard3 ай бұрын

  I have a 82 gl1100 with a bad head. it has a corbin seat. Batwing faring and bags. $500

• 
  @rustednutrepair6753 ай бұрын

  Sounds like a great deal! Thanks for watching!

• 
  @frankcobbs83503 ай бұрын

  Take the thermostat off and you don't have to take the valve cover off. The manifold comes out smooth as glass toward the drivers side

• 
  @rustednutrepair6753 ай бұрын

  That's a great tip! If we have to do this job again, we'll definitely take a try at it that way. Thank you! Thanks for watching!

• 
  @boebradley8673 ай бұрын

  I'm still watching when you guys put out a video. You helped me bring back the life my 1996 Polaris 425 Magnum still runs like a champ. Rock On!

• 
  @rustednutrepair6753 ай бұрын

  I'm glad we were able to help! We do it for that exact reason. Thanks for watching!

• 
  @ericdaniel923 ай бұрын

  I See One of Those 3 Wheelers Is a 200 Tri - Moto ... Not a 225 .

• 
  @rustednutrepair6753 ай бұрын

  Correct, its a 200E, as it has electric start, and one is a 225DR, because it has reverse. Great eye! Thanks for watching!

• 
  @JenHessling4 ай бұрын

  Do you know where you got parts from? Looking for rear brake hose

• 
  @rustednutrepair6753 ай бұрын

  Usually we cross reference Partzilla for part numbers and the different models parts were used on, then hit up eBay or Amazon for parts, depending on what it is. Thanks for watching!

• 
  @jammingj81874 ай бұрын

  Can you please tell me where you found the carburetors for this model thanks

• 
  @jammingj81874 ай бұрын

  I have the exact same mini bike it belongs to my son but he's passed away in 2013. It's only been used for like 3 times for short rides and has been in the garage, still looks new , im going to try to get it running again, thank you for taking the time to make this video. ,

• 
  @rustednutrepair6754 ай бұрын

  That’s really touching. Thank you for sharing that with us. Best of luck in getting it running. And also, thanks for watching. As for the carburetor, we ordered it in eBay, but you can also find them on Amazon.

• 
  @inthenameofmyfather38364 ай бұрын

  it sounds like your working under a Bridge dude!

• 
  @anthonyfields56074 ай бұрын

  Hey I just started the rebuild on a 225 dr. Having some problems finding parts and I stumbled across your videos. By chance do you have any parts left over from yalls build.

• 
  @rustednutrepair6754 ай бұрын

  Thanks for watching. We do, however we still have 3 more 225s to rebuild. Sorry. Marketplace is a good spot for parts! We also scout eBay for parts, too. Good luck with your rebuild!

• 
  @anthonyfields56074 ай бұрын

  @rustednutrepair675 Thanks for the tips looking forward to the build.

• 
  @urinetrouble36614 ай бұрын

  I know nothing about ATV's but am looking to purchase a 2003 Arctic Cat 400 4x4 automatic. Once you select high or low gear and start going, do you just shift gears while going fast or do you let off the throttle and slow down first? I have never ridden one, let alone an automatic. Thanks

• 
  @rustednutrepair6754 ай бұрын

  Thanks for watching! We come to a complete stop before changing gears from low to high. Low gear is for pulling, climbing, and mud holes. High gear is for out right riding. Most of the things we do, we do in high gear. Some climbs might require low gear though! Enjoy your machine!

• 
  @MichaelJohnson-tj7py4 ай бұрын

  I have a 200 and a 225

• 
  @markchoate90214 ай бұрын

  Good video. I notice you have this on jack stands as opposed to just putting wheels on blocks. Do you need to have the weight off of the wheels to do this job??

• 
  @rustednutrepair6754 ай бұрын

  Thanks for watching! It doesn’t need to have the weight off of the wheels, that’s just what we had laying around to get the job done. Good luck!

• 
  @kebo575 ай бұрын

  Did he say "free 99"? If he was buying it, I wouldn't have given any more than $50 for it, if it was me buying it. I bought an LT1000 not too long ago to for $175, but it's a pretty nice mower and was taken care of. Mine has the 6 spd transmission though, it's not hydro. All mine really needed was a new PTO cable for blade engagement and a new seal for the plastic dipstick filler tube (it was leaking oil where it slides into the seal). I plan on flipping mine for about $450 once the mowing season gets here, which it's just about here now.

• 
  @rockytophearts27325 ай бұрын

  I have a 2004 that we replaced the A arms and now it pulls to the right hard do you have any videos to diagnose that?

• 
  @rustednutrepair6755 ай бұрын

  Thanks for watching! Check the alignment on the machine.

• 
  @johnsanborn9025 ай бұрын

  Need to know where the wires go in the box there for the four-wheel drive Auto 4

• 
  @rustednutrepair6755 ай бұрын

  Thanks for watching. Well look into it. Message us on Instagram, if you have it!

• 
  @ShultzMotorSports5 ай бұрын

  Good video 🎉 alot of people don't know or fail to pay attention too bolts being different lengths when taking something apart.

• 
  @rustednutrepair6755 ай бұрын

  Thanks for watching! We try and keep stuff organized as much as possible! But we make mistakes, just like anyone else!

• 
  @fastlanetechnologies25125 ай бұрын

  Very informative have to tell you the truth it really hurt watching you bash that master link on. Ha ha.

• 
  @rustednutrepair6755 ай бұрын

  Thanks for watching! We didn’t have the chain tool at the shop, so we had to improvise. The chain is still holding strong!

• 
  @fastlanetechnologies25125 ай бұрын

  @@rustednutrepair675 I enjoyed watching it. It helped me do the same thing on my 300 im restoring now I opted to go to Harbor freight and get the chain tool ha ha for 15 bucks money well spent.

• 
  @mitchell62075 ай бұрын

  I can’t get the spring in no matter what I do any tips would help?

• 
  @rustednutrepair6755 ай бұрын

  We just slip it in the groove and spin it up. It can be a little bit tricky. Patience and a bandaid are a must for sure! Thanks for watching!

• 
  @user-kq4cl2hw4c6 ай бұрын

  Didn’t even clean the gasket surface 😂

• 
  @rustednutrepair6755 ай бұрын

  She still runs, too! Thanks for watching! 😃

• 
  @HermanDeLaCruz-ns5zn6 ай бұрын

  I came for spring return

• 
  @waynehoberg16556 ай бұрын

  Your breaks and content, speed ups and comments are garbage.

• 
  @rustednutrepair6755 ай бұрын

  Thanks for watching!

• 
  @jamieengland99216 ай бұрын

  Compressions a bit low even with some oil helping it. Aren't the cylinders cast in nikasil or Nickel plated. My 96 440 is. I'd be scared to run that Hone through it. If it's bad send it out to get re sleeved. It probably would still run on 80.psi on a good day

• 
  @tigerwatts25376 ай бұрын

  You seriously buy a new chain every time? Just remove a link out of chain my friend. That chain has tons of life left in it.....

• 
  @pabloisraelpapadegoku53997 ай бұрын

  Where you buy the kit cilyndre and piston

• 
  @alexsenst49127 ай бұрын

  What is the filter that goes in the airbox? i just picked one up and cant find out what filter goes with it! Any help would be appreciated!!

• 
  @tac12gaming97 ай бұрын

  Reverse threads

• 
  @andrewsrc46147 ай бұрын

  What piston kit did you get for it?

• 
  @rustednutrepair6757 ай бұрын

  I don't remember which piston kit Archie ordered, but if I had to guess, it was one on eBay. Thanks for watching!

• 
  @Connor-ku1wt7 ай бұрын

  Nothing is easy on a jeep... Great video man, tackling this this weekend

• 
  @rustednutrepair6757 ай бұрын

  We've learned. Best of luck with your project! Thanks for watching!

• 
  @quintin.04128 ай бұрын

  What's the torque spec for the heads nuts

• 
  @andrewinsinga29938 ай бұрын

  How do you like those tire?

• 
  @buildurtruckurway91188 ай бұрын

  I had a 98 magnum 425 that was shaft drive for the front differential. But chain for the rear. Was a really weird setup. But it was identical to the sportsman and xplorer 400.

• 
  @TheMr7858 ай бұрын

  Do you have a part list?

• 
  @Cloroxbleach-mp7hv8 ай бұрын

  Was the gas on pri or on or res when test riding

• 
  @adaminjp8 ай бұрын

  Looking awesome. I have the same exact camper and had the same issue where mice ate through the canvas. How you liking the replacement canvas? Would you mind doing a video of how it clips in by the screen door? I wanna make sure when I get my replacement canvas it connects to the screen door properly since I don’t know how to do it right now.

• 
  @rustednutrepair6758 ай бұрын

  Thanks for watching! Bear Creek is a SOLID company and I can’t stress that enough! I riveted the Velcro strips to the door. I went to harbor freight and purchased the riveter that came with 1/8 rivets and used those. Best of luck!

• 
  @adaminjp8 ай бұрын

  @@rustednutrepair675that’s awesome I would love to see how that turned out if you ever do a follow up video.

• 
  @rustednutrepair6758 ай бұрын

  Come spring time we’ll post a follow up video! There are a few more things to do to have the camper set up perfect for my camping style!