Пікірлер

• 
  @tylerberryman2415 күн бұрын

  Suzuki and Yamaha outboards are far more reliable… etecs are not lol that’s why they don’t make them anymore.. the G2s really sealed the deal for them shutting down…

• 
  @Kyle-bb9zp25 күн бұрын

  Spend your time on the water with Evinrude e-tec best built outboards ever

• 
  @astroplutonium3 ай бұрын

  Evinrude is like the water engine... They killed it because it is the best in the market and they could not live with the competition....

• 
  @willzak92795 ай бұрын

  I have a 2017 50 hp e tec, has been a good motor, until a month ago, IT will start ok that is it. When you put it in gear the motor shakes and has no power..

• 
  @ayhankucukozer14786 ай бұрын

  I have a 30 hp evinrude e teceh marine engine, I start the engine, the engine runs at idle, but the engine lights do not turn off. When I put it into gear, the engine stops.

• 
  @jamiebuchan21427 ай бұрын

  This didn’t age well at all.

• 
  @DustinKeating-yk3vq8 ай бұрын

  2stokes need to be broken in also

• 
  @empilhara-empilhadeirasara77678 ай бұрын

  Tenho um 30 etec....o melhor motor do mundo !!!

• 
  @robjeffery34810 ай бұрын

  I love evinrudes.... the worst thing that could have happened is they got sold to brp.... canadian subsidized company that wouldnt be in business without us

• 
  @autodidact53710 ай бұрын

  BRP should have their heads examined for canceling the Evinrude ETEC.

• 
  @Huntersprojects Жыл бұрын

  I have a 50 etec 2009 we sadly hit a rock and blew a hole in the lower unit is it worth repair?

• 
  @Kyle-bb9zp Жыл бұрын

  Best built outboards ever to bad they are no longer miss Evinrude

• 
  @cainenjohnston8382 Жыл бұрын

  I’ve always grew up on mercurys an they’ve always won’t fall apart on us but I have friends with evinrudes an Suzukis an they’ve beaten them an ram em through pure mud an still fun tough but I run mud motors cause of our waterways but i want another boat with an evinrude

• 
  @Synthomania Жыл бұрын

  So cool! Did OMC ever make similar videos?

• 
  @mckessa172 жыл бұрын

  The 64 to 66 Mercs were nice looking outboards.

• 
  @Steve-yh1pj2 жыл бұрын

  I have the etec 90 2012 model which is an amazing engine efficient and Powerful. Very reliable and way lighter than a 4 stroke. I really hope someone else picks up the reins where BRP dropped them it's also worth noting that BRP have really let everybody down so why would you ever trust them again????? They killed off an extremely good product line because somebody else drop dollars in their pockets.

• 
  @cars_are_us9892 жыл бұрын

  I have a one of the last year 2019 40s they made and she rips

• 
  @northamericanproductions Жыл бұрын

  I agree. The Canadian company BRP should sell Evinrude back to an American company. They dropped the ball just like OMC. I have a 25hp etec and it’s great. I just wish it didn’t say BRP.

• 
  @AAE-cg1il2 жыл бұрын

  I bought a new one back in 207 and now they are gone…..

• 
  @user-qb6ky3vq8h2 жыл бұрын

  I love Evinrude

• 
  @redkamsk15982 жыл бұрын

  А в совке в это время появился Вихрь))

• 
  @dginta79322 жыл бұрын

  …cause they are going to shut down making engines and the value of your motor will be similar to the price of an anchor. Trust me I know.

• 
  @MattMohsOutdoors2 жыл бұрын

  Cool seeing this but there’s a reason there aren’t many of these around anymore compared to OMC motors

• 
  @mckessa172 жыл бұрын

  Lots of old Mercs around youngster, I have one.

• 
  @cutterdachuk92493 жыл бұрын

  So cool to see lake x 40 years ago

• 
  @ivanschuster52673 жыл бұрын

  nice promotion additionally based on the facts. Question: Why the Evinrude production is stopped?

• 
  @riccardobarlocco6618 Жыл бұрын

  Because half of the video claims are fake

• 
  @SodiumEx Жыл бұрын

  @@riccardobarlocco6618 I disagree with you. My 225 etech h.o been running amazing got over 13 years

• 
  @riccardobarlocco6618 Жыл бұрын

  @@SodiumEx i sad that half are fake not that is not a good engine, in fact is average in terms of performance and on the bad side for reliability i would personaly prefer a yama over a e-tech*

• 
  @SodiumEx Жыл бұрын

  @@riccardobarlocco6618 I had a Yamaha aswell. They're amazing . But I love my evinrude so much .

• 
  @johnbumpus713810 ай бұрын

  @@SodiumEx I also have the Evinrude E tec 225HO it actually produces about 247 hp at the prop I’ve had it for seven years now and the only problem I’ve ever had was the prop shaft seal because fishing line got twisted around it my friend has the same boat (Grady white) with a Yamaha 250 I have a better top speed and much more efficient with fuel

• 
  @edwardabrahamiii37423 жыл бұрын

  3:00 min mark that guys a liar im from Alaska

• 
  @alex84493 жыл бұрын

  this video aged badly

• 
  @paulchen5083 жыл бұрын

  2021 and up to 10x more Hp

• 
  @schlaznger80493 жыл бұрын

  2021 No more Evinrude.

• 
  @curthensley32653 жыл бұрын

  I just watched a 10 minute commercial

• 
  @MrJohnestall3 жыл бұрын

  I had one evinrude , I threw it in a skip

• 
  @dsciarrino36633 жыл бұрын

  The Best money can buy

• 
  @AB-bg1or3 жыл бұрын

  Look how many lives are being saved everyday now that the E tec is discontinued. Less heartbreaks throughout the world. There is hope after all.

• 
  @angelorusso15493 жыл бұрын

  i just bought a boat with a 90 hp E teck and it starts after several attempts and after it it runs on idol for a certain period of time the console starts beeping so i turned the motor off because i have no clue why is that

• 
  @alanburke7583 жыл бұрын

  So what was the cause of the overheat

• 
  @edwardabrahamiii37423 жыл бұрын

  Its 2020 and no more evinrude and changing oil once or twice a year is better then buying a $55.00 gallon of injection oil here in my village of ALASKA

• 
  @AB-bg1or3 жыл бұрын

  Not to mention down time when this garbage motor fails.

• 
  @edwardabrahamiii37423 жыл бұрын

  @@AB-bg1or did you own 1 or is that just an opinion of yours??

• 
  @AB-bg1or3 жыл бұрын

  @@edwardabrahamiii3742 the company I work for owns them and I am a full time operator. We had four of the 225s and have had nothing but problems. None made it to 500 hours without major issues including powerhead replacements, lower unit failure and injector issues. We have since moved on to Suzukis and so far so good.

• 
  @edwardabrahamiii37423 жыл бұрын

  @@AB-bg1or them motors are to big for 2 strokes get a smaller 115 horse or 90 horse even 140 and 150 i think after that is when they become to much motor for a 2 stroke

• 
  @edwardabrahamiii37423 жыл бұрын

  Anybody knotice that yamaha prop not spinning at all i wonder why

• 
  @havocsquad13 жыл бұрын

  That's changed from "Why you should buy an Evinrude E-Tec" into "Run away as fast as possible". Parts support is drying up fast for the E-Tec motors and the remaining support will be to meet warranty obligations they have. Once the warranty period expires on the 2020 motors, BRP will sell off/stop parts support on all Evinrude areas that is not consistently profitable. Dealers for Evinrude the certified shops are trying to figure out when and how they want to stop servicing them.

• 
  @nicolaimyrvoll16854 жыл бұрын

  I have an e-tec 75 2006 it was a great engine untill the emm failed. My boat has now been sitting for nearly 4 weeks because im waiting for a used 2009 emm.

• 
  @fogduker31314 жыл бұрын

  Junk

• 
  @AB-bg1or3 жыл бұрын

  YUP!

• 
  @cantwell1614 жыл бұрын

  9:55 Rip Taylor doing a Merc commercial. 😂

• 
  @bwyyy73064 жыл бұрын

  Not anymore

• 
  @csinalabama4 жыл бұрын

  Nothing matters if it is not reliable. Boaters don't want any surprises at the boat launch but apparently that's something that happens with these engines. This ain't the 70's BRP; people don't tolerate what they used to.

• 
  @dsciarrino36634 жыл бұрын

  The Best money can buy.

• 
  @koalajs4 жыл бұрын

  Why everyone is yelling on these videos ? BLAH BLAH. Selling doesn’t mean yell at everyone and make everyone believe that what is coming out from your mouth is the truth? Stop shouting.

• 
  @lenwilson21414 жыл бұрын

  :f

• 
  @ebsell5 жыл бұрын

  Ok for a hobby guy. Absolutely no good in the commercial industry.

• 
  @ebsell5 жыл бұрын

  Wait until you have to deal with BRP because of warranty. You will wish you would have bought a set of oars.

• 
  @Alan_lay4 жыл бұрын

  Have done, had no problems with them at all, had an engine mount wear at 600 hours, had to be replaced before failure, only about 1 month left on 5 year warranty, $1500 + repair and they replaced it quickly with no charge.....excellent to deal with...

• 
  @dginta79322 жыл бұрын

  Yup…ditto.

• 
  @DMD817735 жыл бұрын

  Im done with stinky 2 strokes

• 
  @jimkelly15784 жыл бұрын

  Re-powered my 18' Tyee with a 135 H.O. E-tec a year ago. Starts on the first turn every time and guess what...no smoke at all. One of the cleanest engines on the water...just like they advertise. No oil changes, 5 year warranty and it self-winterizes. Takes 2 minutes to winterize it. Four-stroke 150's can't stay with it either. Maybe you should take a look before you bad-mouth 'em. Just say'n.

• 
  @jasong-pv4se5 жыл бұрын

  i have a 2016 115hp retec and i love it. Tons of power,quiet and it starts first turn of the key every time.

• 
  @matthewthomassen61275 жыл бұрын

  Nothing but problems with my 50 hp e-tec. Wouldn't start, stalls randomly, goes into limp mode when running, etc. Replaced the battery, cleaned out fuel tank then filled with fresh no ethanol gas, changed out ECU & fuel filter, swapped spark plugs, etc. 2 trips to the shop, + calls into the manufacturer & $2,500 later the problems persist. Been nothing but a money pit and headache, so I will be swapping it out for a Yamaha or Mercury.

• 
  @edharm84464 жыл бұрын

  It's obvious the shop you're going to doesn't have any mechanics.

• 
  @matthewthomassen61274 жыл бұрын

  @@edharm8446 Turns out it was those e-tec fancy high pressure injectors. They have very small margins for error in pressure & temp. I think the oil wasnt circulating properly within the injectors (its used to cool them) & was causing a temp spike so the ECU would cut the fuel. Went with a never used 2015 Yamaha 50 hp 4 stoke with a $2500 credit for what I already spent. Wouldve been as much for new e-tec injectors + labor anyways. Been trouble fee ever since.

• 
  @edharm84464 жыл бұрын

  @@matthewthomassen6127 Hey Matthew, was talking with an Alumacraft/Evinrude dealer yesterday and for the first time I heard a dealer admit what was one of the main issues with early Etec's. In the design the oil lines were routed near high temp areas of the engine resulting in failed lines and seized power heads. This flaw has been corrected since and new routing implemented throughout the engines. Combine the mentioned issue with the injectors and yeah there were issues. Second the injectors are precision instruments, so the days of careless fuel handling, storage, fuel life, and water in the fuel system are critical to proper injector performance.

• 
  @Kyle-bb9zp Жыл бұрын

  Good luck buying a four stroke I would never buy a four stroke

• 
  @vilmaromero23225 жыл бұрын

  Me sobra un cable que viene de la computador del evinrude 115 1998

• 
  @thodorisd72665 жыл бұрын

  I have a evinrude ETEC 130 ,the moter has a ot of power but i have a lot of small problems ,the etec is good motor only for those who dont use them for many hours ,Expensive parts and the injectors and some other parts 80 percent after 400 hours broke down,before etec i had Yamaha four stroke until the time i sold it (2000 hours) worked perfect!