Hello friend, I like your channel, and the models you build. With so much detail, I already want to try your way of construction. It seems very timely and easy to follow. Do you think you can share one of your models to start this beautiful hobby? ?
@kousakunin200811 күн бұрын
Do you mean you want to see the drawing of DLG?
@lancelotlalla756114 күн бұрын
How do you print your wing profile thank you nice video.
@kousakunin200811 күн бұрын
You can download the templates for core-cut from my website below kousaku.sakura.ne.jp/RC/wing_design.htm
@novalhikmat904215 күн бұрын
Awwwwwwwesome
@SomeGuyInSandyАй бұрын
State of the art. Very nice!
@marc_frankАй бұрын
do you build the same design every year or do you change it from time to time?
@kousakunin2008Ай бұрын
Same color, but trying different wing chord and airfoils this several years
@afilosАй бұрын
Nice build, learnt a lot from your videos, thanks for sharing!!!
@user-ix7jn5ep9kАй бұрын
Чудово що у вас не змінилось нічого.а до нас прийшла війна.уже два роки не можу облітати свій позетив 1,5.і Malibu 1.0.дуже хотілось,але якщо і дадуть відпустку-не хочу дратувати ПВО.ГАРНИХ потоків.а Путін хуйло
@peterhancox5268Ай бұрын
Hopeless. Video to watch
@user-ym1ub4do5i2 ай бұрын
ありがとうございます チャレンジしてみます
@matthewborne76592 ай бұрын
Man O man...this is light years ahead of the Dynaflite Skeeter HLG I built and flew 25 years ago !! I've been too long out of the Hobby ! Time to catch up ! Thanks for sharing
@nicksutton29642 ай бұрын
This is so informative! Thank you. What actually happens to the spray adhesive in between the layers? Does the epoxy dissolve it? Does the spray adhesive affect the lamination strength very much?
@kousakunin20082 ай бұрын
Spray adhesive dissolves in epoxy resin, so it does not affect strength.Spray glue prevents the laminated layers from fraying, making the work easier.
@nicksutton29642 ай бұрын
@@kousakunin2008 Thanks. I will try using it. I already have some 3M No.77 but perhaps I will buy the same (no.55) as you use. My project is a little different to yours. I am building a velomobile out of carbon fibre and I am hand-laminating the carbon and Innegra layers. I am laying-up mostly 200gsm twill carbon 2.7 metres long and 1 metre wide. I have a couple of F3K gliders, a Blaster 3.5 and a Vortex 3 and to me, they look beautifully made. Seeing your work makes me want to try scratch-built F3K too.
@nicksutton29642 ай бұрын
Fantastic. You are the Master! Thank you so much for sharing.
@collinmccallum2 ай бұрын
amazing!
@MultiEski2 ай бұрын
Fantastic channel this is what I was looking for 😊 do you share this plans ?
@kousakunin20082 ай бұрын
You can find the wing plans from my website kousaku.biz/RC/wing_design.htm However, I don't have hole plans. I recommend to copy the plans of high-performance commercially available aircraft below. *snipe f3j.in.ua/media/snipe-sn/original/snipe-sn-dlg-assembly-drawing-preview.jpg *flitz aeromodelis.lt/Flitz-3-products-c120608251 *Falcon www.hyperflight.co.uk/products.asp?code=FALCON&name=falcon-2-1-5m-dlg#mz-expanded-view-1254346996313
You should make playlists for your builds so people don't have to keep switching back to main channel and scroll to find next video in the sequence.
@kousakunin20083 ай бұрын
True. I'll try.
@jorgarciahern3 ай бұрын
Hello, do you reuse the polypropilene sheet? do you clean it with acetone, or any other cleaning, after one use?
@kousakunin20083 ай бұрын
Yes polypropylene is reusable. It's better cleaning with acetone or alcohol.
@juliaero53483 ай бұрын
the link of next step video?
@Johnstonsonsen3 ай бұрын
Gloves... cancer
@Cedric.landes3 ай бұрын
Nice Job !!!!!!!!
@gorski63993 ай бұрын
Спасибо Мастер!
@jorgarciahern3 ай бұрын
Dont you thing that the blue and orange threads should not be straight to the pulley? That is the reason it stops the movement at the end of the cut and you have to help with your hands to complete the cut.
@richard-coursenligne19563 ай бұрын
Glad to see plywood and aluminium tape can be an alternative. How much are the aluminium wearing before you have to change them?
@kousakunin20083 ай бұрын
No need to change. However, the cut surfaces of the plywood are hardened with a CA bond, smoothed with sandpaper, and then aluminum tape is pasted.
@paulbehr40934 ай бұрын
Excellent presentation.
@victorsmith29844 ай бұрын
Yesss, with sound 😊
@kousakunin20084 ай бұрын
Thanks for letting me know
@georgehradil3734 ай бұрын
Extremely tidy building. This is really great craftmanship.
@jorgarciahern4 ай бұрын
Did you try a short vacumm to suck the exciding resin? 7:28
@XFBO4 ай бұрын
Love watching your builds but for those of us aspiring to build too, it'd be awesome if you could share a parts list of all the cloths you use??? If not too much trouble!
@4140-RC4 ай бұрын
Thank you!
@Thalarctos.4 ай бұрын
Superbe résultat !!
@MrPaolo196719674 ай бұрын
Tankyou very Mach
@jorgarciahern5 ай бұрын
Great job! With the polipropilene sheet, you dont need to wax it, right? Even not when you paint it, right?
@kousakunin20085 ай бұрын
Right. No need to wax. However hard to get polypropilene.
@jorgarciahern5 ай бұрын
@@kousakunin2008 in europe is known as Plakene, not dificult to find. I will give a try.
@kousakunin20084 ай бұрын
Good to know. To be sure, you should check in advance by applying resin. I had gotten not be released one before.
@user-zw9zb4gs6v5 ай бұрын
wow
@ueber30uwe5 ай бұрын
Can you share a link to the profile do you use for the dlg Wing...please😊
@kousakunin20085 ай бұрын
You can download some drawing from my website below. kousaku.biz/RC/wing_design.htm
@ueber30uwe5 ай бұрын
@@kousakunin2008 Thank you very much 🤗 Wich Airfoil ist better for Thermal & Run? The Hayabusa 10 or 18 🫣
@kousakunin20085 ай бұрын
As for the sinking rate Hayabusa10 is better. Penetration Hayabusa18 is better.
@domenicobosco5 ай бұрын
Hi from Italy! It is always a pleasure to see your videos and tecniques! This is art! Thanks again.
@Liithiumbob5 ай бұрын
Hi. Great videos. Where do you buy the kevlar for the hinges. I can't find it anywhere. Thanks.
@michaelwhinnery1645 ай бұрын
Where do you order your cloth and resins from ?
@kousakunin20085 ай бұрын
As for the cloth, you can get from CN-models shop.cn-models.com/carboweave/ Resin, I'm not sure where youcan get from outside of japan. The product name: Araldite LY 5052
@michaelwhinnery1645 ай бұрын
Can I purchase a wing from you ?
@barenekid96955 ай бұрын
Big deal you've shaved 3 grams off a Built up Balsa version ....Really worth all the work ??
@user-dr7kr5kj1p5 ай бұрын
Very nice. But one question: why do you cut the lower side first? Is it not better to cut the upper side first?
@kousakunin20085 ай бұрын
Theoretically, if you cut from the top first, the thickness will become thinner as the core melts with the hot wire when cutting the bottom.
@6696joaopaulo5 ай бұрын
...Trabalho Profissional...Nota 10...Vários Like
@nikita.gazarov5 ай бұрын
Thank you for showing the ultrasonic cutter, never seen this method before. Looks like it makes (almost?) no dust, very nice.
@SomeGuyInSandy6 ай бұрын
Wonderful! Lots of tips and tricks in here! Thanks!
@afilos6 ай бұрын
Nice to see you building again! As always perfect!
@Cedric.landes6 ай бұрын
Nice video !!!!!
@TingILi6 ай бұрын
Could I know how to record exhaust sounds like yours? Gopro with digital recorder or .....????
@kousakunin20086 ай бұрын
Right, Gopro, digital recorder (TASCAM DR-05), and external microphone attached at the rear fender. Audio and video are not synchronized and must be synchronized after recording.
@user-se1iv9ev6m6 ай бұрын
Great sound ❤
@imbok6 ай бұрын
Beautiful and clean spoiler installation. I like the details. The spoiler is large and I'm sure it will be very effective! Happy flying!
@kondatck38998 ай бұрын
ありがとうございました!
@jorgarciahern8 ай бұрын
Could younsharevthe plans of this model?
@kousakunin20088 ай бұрын
This plan is designed by my friend. It’s not publicly available.
Пікірлер
Hello friend, I like your channel, and the models you build. With so much detail, I already want to try your way of construction. It seems very timely and easy to follow. Do you think you can share one of your models to start this beautiful hobby? ?
Do you mean you want to see the drawing of DLG?
How do you print your wing profile thank you nice video.
You can download the templates for core-cut from my website below kousaku.sakura.ne.jp/RC/wing_design.htm
Awwwwwwwesome
State of the art. Very nice!
do you build the same design every year or do you change it from time to time?
Same color, but trying different wing chord and airfoils this several years
Nice build, learnt a lot from your videos, thanks for sharing!!!
Чудово що у вас не змінилось нічого.а до нас прийшла війна.уже два роки не можу облітати свій позетив 1,5.і Malibu 1.0.дуже хотілось,але якщо і дадуть відпустку-не хочу дратувати ПВО.ГАРНИХ потоків.а Путін хуйло
Hopeless. Video to watch
ありがとうございます チャレンジしてみます
Man O man...this is light years ahead of the Dynaflite Skeeter HLG I built and flew 25 years ago !! I've been too long out of the Hobby ! Time to catch up ! Thanks for sharing
This is so informative! Thank you. What actually happens to the spray adhesive in between the layers? Does the epoxy dissolve it? Does the spray adhesive affect the lamination strength very much?
Spray adhesive dissolves in epoxy resin, so it does not affect strength.Spray glue prevents the laminated layers from fraying, making the work easier.
@@kousakunin2008 Thanks. I will try using it. I already have some 3M No.77 but perhaps I will buy the same (no.55) as you use. My project is a little different to yours. I am building a velomobile out of carbon fibre and I am hand-laminating the carbon and Innegra layers. I am laying-up mostly 200gsm twill carbon 2.7 metres long and 1 metre wide. I have a couple of F3K gliders, a Blaster 3.5 and a Vortex 3 and to me, they look beautifully made. Seeing your work makes me want to try scratch-built F3K too.
Fantastic. You are the Master! Thank you so much for sharing.
amazing!
Fantastic channel this is what I was looking for 😊 do you share this plans ?
You can find the wing plans from my website kousaku.biz/RC/wing_design.htm However, I don't have hole plans. I recommend to copy the plans of high-performance commercially available aircraft below. *snipe f3j.in.ua/media/snipe-sn/original/snipe-sn-dlg-assembly-drawing-preview.jpg *flitz aeromodelis.lt/Flitz-3-products-c120608251 *Falcon www.hyperflight.co.uk/products.asp?code=FALCON&name=falcon-2-1-5m-dlg#mz-expanded-view-1254346996313
今日は DLGグライダー愛好家(初心者)です カーボンクロスに乗せる白い物は?ペーパー?ビニール?教えてください。 ペグを自作するのに参考にいたします
白いのは普通のゴミ袋です。色は何色でもかまわないのですが、透明だと取り忘れたりします。ゴミ袋の材質はポリエチレンなので容易に離型できます。
You should make playlists for your builds so people don't have to keep switching back to main channel and scroll to find next video in the sequence.
True. I'll try.
Hello, do you reuse the polypropilene sheet? do you clean it with acetone, or any other cleaning, after one use?
Yes polypropylene is reusable. It's better cleaning with acetone or alcohol.
the link of next step video?
Gloves... cancer
Nice Job !!!!!!!!
Спасибо Мастер!
Dont you thing that the blue and orange threads should not be straight to the pulley? That is the reason it stops the movement at the end of the cut and you have to help with your hands to complete the cut.
Glad to see plywood and aluminium tape can be an alternative. How much are the aluminium wearing before you have to change them?
No need to change. However, the cut surfaces of the plywood are hardened with a CA bond, smoothed with sandpaper, and then aluminum tape is pasted.
Excellent presentation.
Yesss, with sound 😊
Thanks for letting me know
Extremely tidy building. This is really great craftmanship.
Did you try a short vacumm to suck the exciding resin? 7:28
Love watching your builds but for those of us aspiring to build too, it'd be awesome if you could share a parts list of all the cloths you use??? If not too much trouble!
Thank you!
Superbe résultat !!
Tankyou very Mach
Great job! With the polipropilene sheet, you dont need to wax it, right? Even not when you paint it, right?
Right. No need to wax. However hard to get polypropilene.
@@kousakunin2008 in europe is known as Plakene, not dificult to find. I will give a try.
Good to know. To be sure, you should check in advance by applying resin. I had gotten not be released one before.
wow
Can you share a link to the profile do you use for the dlg Wing...please😊
You can download some drawing from my website below. kousaku.biz/RC/wing_design.htm
@@kousakunin2008 Thank you very much 🤗 Wich Airfoil ist better for Thermal & Run? The Hayabusa 10 or 18 🫣
As for the sinking rate Hayabusa10 is better. Penetration Hayabusa18 is better.
Hi from Italy! It is always a pleasure to see your videos and tecniques! This is art! Thanks again.
Hi. Great videos. Where do you buy the kevlar for the hinges. I can't find it anywhere. Thanks.
Where do you order your cloth and resins from ?
As for the cloth, you can get from CN-models shop.cn-models.com/carboweave/ Resin, I'm not sure where youcan get from outside of japan. The product name: Araldite LY 5052
Can I purchase a wing from you ?
Big deal you've shaved 3 grams off a Built up Balsa version ....Really worth all the work ??
Very nice. But one question: why do you cut the lower side first? Is it not better to cut the upper side first?
Theoretically, if you cut from the top first, the thickness will become thinner as the core melts with the hot wire when cutting the bottom.
...Trabalho Profissional...Nota 10...Vários Like
Thank you for showing the ultrasonic cutter, never seen this method before. Looks like it makes (almost?) no dust, very nice.
Wonderful! Lots of tips and tricks in here! Thanks!
Nice to see you building again! As always perfect!
Nice video !!!!!
Could I know how to record exhaust sounds like yours? Gopro with digital recorder or .....????
Right, Gopro, digital recorder (TASCAM DR-05), and external microphone attached at the rear fender. Audio and video are not synchronized and must be synchronized after recording.
Great sound ❤
Beautiful and clean spoiler installation. I like the details. The spoiler is large and I'm sure it will be very effective! Happy flying!
ありがとうございました!
Could younsharevthe plans of this model?
This plan is designed by my friend. It’s not publicly available.