Nice tour! How do you like the icon 3/4 torque wrench? Been thinking about it...
@thejunkyarddrifter22 сағат бұрын
@@NotMe-rt4hk been great so far! Haven’t had the chance to really break her in though! I’ll post a review after a few months of use in the shop!
@markm0000Күн бұрын
That’s cool man I like how you made some tools to get the job done.
@thejunkyarddrifter21 сағат бұрын
Thank you! Gotta do what ya gotta do to get rigs on the road!
@markm000014 сағат бұрын
@@thejunkyarddrifter there’s decent sets of thin wrenches nowadays that are pretty affordable. That’ll help speed up a lot of jobs.
@thejunkyarddrifter9 сағат бұрын
@@markm0000 I’ll have to look into em! Thanks for the heads up brother!
@tonycroteau9264Күн бұрын
Great video 👍
@thejunkyarddrifter21 сағат бұрын
Thank you!! ❤
@user-zu4gp6rg6gКүн бұрын
Mericaaaaa
@PapasHobbyGarageКүн бұрын
I did this build with a Pittsburgh flex head. I did a video on it. The hole setup was under $50 and I use it all the time.
@LarsanatorКүн бұрын
Just leave that air hose disconnected!😂
@randypullman11552 күн бұрын
That's an aftermarket stick.😂
@HoffaJedi2 күн бұрын
You dont need that pulled out to move ypu fool.
@pabloaguilar19622 күн бұрын
And its worse when you have drinks on those cup holders, I drove an INTRASHNATIONAL once and hated it. Those trucks design are garbage no wonder they're the cheapest and ugliest.
@Layne-g8q2 күн бұрын
When the buttons pushed in the breaks are released so it wouldn't lock up
@dt46762 күн бұрын
That only releases the trailer brakes
@PKnuppe2 күн бұрын
When you dont have a trailer you are just dumping your air
@pandarooster12 күн бұрын
Sucks when slamming gears and then trailer brakes lock up thats why i hate the bent sticks
@sreece1188Күн бұрын
lol pushing it in releases the brakes. It doesn’t set them
@robcrossan62743 күн бұрын
That really sucks to hear about the bad experience. I have a bunch of Matco ratchets because I'm a tool addict and like all the colors 😂 but honestly.. I use a semi locking flex head Duralast ratchet every day and it hasn't acted up once. It's the snap ring style head too. No issues. I had a matco ratchet break at the weld like the 3rd time I used it....on a drain plug.... But then my long flex head 3/8 matco has held up very well everyday. Imo snap on makes the best ratchet. Dual 80 is king . just wish they'd make a prettier ratchet, matco has more colors and finishes.
@brycensadventures4423 күн бұрын
Niceeeeeee
@eliezerramosjr10176 күн бұрын
All to it is the design is definitely flawed and they need to redesign them. If not mistaken I’ve heard thru the grapevine that they are actually in process now or already processed.
@Raymwa1876 күн бұрын
The tip is medal on semi trucks 💫
@dylan7.3294 күн бұрын
That’s the trans dipstick a lot of them even on Volvos like this one have plastic indicators at the tip
@Use2FACTAUTH9 күн бұрын
I traded in my set of blue point screwdriver set for the same 88$ deal and they’re even better than my Matco set, not sure which ones I want to use for home and work😅
@kirkmbutterfield11 күн бұрын
I hate working on trucks. Cancer
@danetenbensel199511 күн бұрын
The old 12.7 detroit. Fuck the ddr13 and ddr15. Dog shit
@BigfootRidge14 күн бұрын
W9’s are a masterpiece
@markerickson427316 күн бұрын
Big can of liquid gas!
@at153318 күн бұрын
Those oil filter wrench look like channellock
@codywb0219 күн бұрын
Hauling some ADS StormTech Chambers
@upnorth546519 күн бұрын
They are very picky on how the gears are lubed when installed. They HATE grease and will do that annoying crap constantly. Oil is the only thing that works. Ive broke my 3/8 twice in 5 years and both times i knew i was going to break it. Ive gone back to snap on for both my 3/8 and 1/4" ratchets.
@tomwinslow508619 күн бұрын
I knew that can was getting tipped again. I was saying why is he putting that can right were he is opening the box? 😂😂 I wanted to see the 3/4" wrench.
@antilaw991121 күн бұрын
Does that have screw in cover plate? In video looks like a snap ring style. I gonna say $120 for that?!!
@smanislavkalvan-xo4vy22 күн бұрын
фура низкая только для трассы
@josephmoore229323 күн бұрын
Just take the old part if you can to the store and match it up before you purchase it. That will save you a lot of headache and time. Not that hard.
@pancakemoto780026 күн бұрын
Sorry youve had a bad experience bro. Im a millwright and I went with the Matco ratchet and put it through hell and its held up.
@ldrj2a..18129 күн бұрын
So did you not fix the problem?
@thejunkyarddrifter29 күн бұрын
That’s the joke 😅
@jimmyrathmann4507Ай бұрын
My 1/2” non ultra torque Herc gun removes semi lug nuts.
@victormaholik594Ай бұрын
I have the same ratchet and I haven’t had any issues with it. I use it everyday.
@marcvought308Ай бұрын
Great set.
@patrick-pk9bkАй бұрын
I'm sure they will be just fine without you.
@NotMe-rt4hkАй бұрын
How about a tool box tour when you get it all situated?
@thejunkyarddrifterАй бұрын
Absolutely! Stay tuned!!
@carlwhite9455Ай бұрын
My gawd, im dyin! Sooo funny!
@markm0000Ай бұрын
Then you’ll be crying 20 years later with a broken back. Forget that use an engine lift.
@superoffended6737Ай бұрын
That video was soooo funny!!!🤣🤣🤣
@donwendling7800Ай бұрын
New Subscriber!
@kesnamclaren-sg9ocАй бұрын
they ain’t exclusive I got em from the dollar store
@DigitalGold3DАй бұрын
Lookin gooood!!
@marko11kramАй бұрын
/holy Crap! I sure didn't see that box coming! Gobsmacked
@treatzfortruckerz3913Ай бұрын
Looks a lot like snap on
@mikek4658Ай бұрын
That's my brother from another family @adrenaline269
@adrenaline269Ай бұрын
That’s me and my truck. Thank you. Seeing this video just made my whole day and week all of it. 2018 389 and #007 of the limited edition Canada 150 trucks
@thejunkyarddrifterАй бұрын
I’m happy I made your week man!! It’s such a beautiful truck! Im happy I was lucky to see such a limited run truck!! Keep her rolling brother and I hope to see ya on the highway again!
@aleksahgr6238Ай бұрын
Шедевр
@harveysmale8538Ай бұрын
Might be agble to buy a battery for it
@larryreno8293Ай бұрын
To bad the assholes in California won’t allow that truck on the road anymore. How many miles on it?
@campy9712Ай бұрын
Nice truck
@JayCharland-lg5bzАй бұрын
Hay hauler son😅
@chiefstandingkibull8145Ай бұрын
Mine came with the wires running out of the spaces were the bulbs go. How to wire this light.
Пікірлер
Nice tour! How do you like the icon 3/4 torque wrench? Been thinking about it...
@@NotMe-rt4hk been great so far! Haven’t had the chance to really break her in though! I’ll post a review after a few months of use in the shop!
That’s cool man I like how you made some tools to get the job done.
Thank you! Gotta do what ya gotta do to get rigs on the road!
@@thejunkyarddrifter there’s decent sets of thin wrenches nowadays that are pretty affordable. That’ll help speed up a lot of jobs.
@@markm0000 I’ll have to look into em! Thanks for the heads up brother!
Great video 👍
Thank you!! ❤
Mericaaaaa
I did this build with a Pittsburgh flex head. I did a video on it. The hole setup was under $50 and I use it all the time.
Just leave that air hose disconnected!😂
That's an aftermarket stick.😂
You dont need that pulled out to move ypu fool.
And its worse when you have drinks on those cup holders, I drove an INTRASHNATIONAL once and hated it. Those trucks design are garbage no wonder they're the cheapest and ugliest.
When the buttons pushed in the breaks are released so it wouldn't lock up
That only releases the trailer brakes
When you dont have a trailer you are just dumping your air
Sucks when slamming gears and then trailer brakes lock up thats why i hate the bent sticks
lol pushing it in releases the brakes. It doesn’t set them
That really sucks to hear about the bad experience. I have a bunch of Matco ratchets because I'm a tool addict and like all the colors 😂 but honestly.. I use a semi locking flex head Duralast ratchet every day and it hasn't acted up once. It's the snap ring style head too. No issues. I had a matco ratchet break at the weld like the 3rd time I used it....on a drain plug.... But then my long flex head 3/8 matco has held up very well everyday. Imo snap on makes the best ratchet. Dual 80 is king . just wish they'd make a prettier ratchet, matco has more colors and finishes.
Niceeeeeee
All to it is the design is definitely flawed and they need to redesign them. If not mistaken I’ve heard thru the grapevine that they are actually in process now or already processed.
The tip is medal on semi trucks 💫
That’s the trans dipstick a lot of them even on Volvos like this one have plastic indicators at the tip
I traded in my set of blue point screwdriver set for the same 88$ deal and they’re even better than my Matco set, not sure which ones I want to use for home and work😅
I hate working on trucks. Cancer
The old 12.7 detroit. Fuck the ddr13 and ddr15. Dog shit
W9’s are a masterpiece
Big can of liquid gas!
Those oil filter wrench look like channellock
Hauling some ADS StormTech Chambers
They are very picky on how the gears are lubed when installed. They HATE grease and will do that annoying crap constantly. Oil is the only thing that works. Ive broke my 3/8 twice in 5 years and both times i knew i was going to break it. Ive gone back to snap on for both my 3/8 and 1/4" ratchets.
I knew that can was getting tipped again. I was saying why is he putting that can right were he is opening the box? 😂😂 I wanted to see the 3/4" wrench.
Does that have screw in cover plate? In video looks like a snap ring style. I gonna say $120 for that?!!
фура низкая только для трассы
Just take the old part if you can to the store and match it up before you purchase it. That will save you a lot of headache and time. Not that hard.
Sorry youve had a bad experience bro. Im a millwright and I went with the Matco ratchet and put it through hell and its held up.
So did you not fix the problem?
That’s the joke 😅
My 1/2” non ultra torque Herc gun removes semi lug nuts.
I have the same ratchet and I haven’t had any issues with it. I use it everyday.
Great set.
I'm sure they will be just fine without you.
How about a tool box tour when you get it all situated?
Absolutely! Stay tuned!!
My gawd, im dyin! Sooo funny!
Then you’ll be crying 20 years later with a broken back. Forget that use an engine lift.
That video was soooo funny!!!🤣🤣🤣
New Subscriber!
they ain’t exclusive I got em from the dollar store
Lookin gooood!!
/holy Crap! I sure didn't see that box coming! Gobsmacked
Looks a lot like snap on
That's my brother from another family @adrenaline269
That’s me and my truck. Thank you. Seeing this video just made my whole day and week all of it. 2018 389 and #007 of the limited edition Canada 150 trucks
I’m happy I made your week man!! It’s such a beautiful truck! Im happy I was lucky to see such a limited run truck!! Keep her rolling brother and I hope to see ya on the highway again!
Шедевр
Might be agble to buy a battery for it
To bad the assholes in California won’t allow that truck on the road anymore. How many miles on it?
Nice truck
Hay hauler son😅
Mine came with the wires running out of the spaces were the bulbs go. How to wire this light.