Brush Hogging in the Dirty South
Brush Hogging in the Dirty South
"Located in South Alabama" Brush hogging, leveling dirt, drilling holes with augur, burning brush piles, cutting down trees, and doing up grades on my tractor, equipment, and roof top inspection with my drone.
Пікірлер
Man, that a heck of a setup
Thanks brother, it's working out great.
When you had the puller maxed out on impact gun, all you do is whack the stump jumper with a 3lbs hammer and it will pop free...
I ended up calling Hardee, they told me how to remove it. I had it off in 5 minutes after talking to them. thanks for the comment, and thanks for watching.
How ur tractor running sir
It's running great, no problems with it. It's has over 300 hours on it as of now. thanks for the question, and thanks for watching.
Drill 2" holes on the round plate on either side of the bar that connects the blades , then use a 2jaw puller.
Thanks I have off, new blades installed, and back in operation. Thanks for the comment, and thanks for watching.
Man you are absolutely right about those do not litter sign.
Yeap they just think trash is being thrown down now, just you wait. I was picking trash up next to some property that I have next to a roadway, the next day they threw out twice as much. So, I stop picking it up, the people that live next to that property started picking up. I live about 3 miles from it, so I didn`t have to look at it. 😡
You better take a break and get a glass of lemonade with lots of ice!
It was very Hott that day brother. Thanks for the comment, and Thanks for watching.
That thing looks like a lot of fun to operate. So cool!
It very smooth, and very quiet. it's been raining alot here, but looking forward to playing with it once it dry up. thanks for the comment, and thanks for watching.
Excellent job.
Thank you, and thanks for watching.
Im as frustrated as you are. Please rename your video to " how the thing doesnt come off! Id thank you for less time wasted. I used air bags foe openig car doors then hammering. It worked great. Thanks
That thing beat me down🤣, but it's all over now, I won. lol 😆 Thanks for watching.
Man that's a long wrench 🔧
Yes it is. lol
I see you hard at it
Yeap big limb broke. lol
Love this video keep up the good work buddy 😊
thank you, and thanks for watching.
I found that using vice grips to squeeze the roll pin makes it a lot easier.
Great tip, thanks for watching.
Good job Brother. You definitely thought this through
It was a rough 2 days of working on it, but after talking to Hardee about it, they walked through it. Thanks for the comment, and thanks for watching.
Very good. I am the same age and that doesn't any . Good job
Thanks for watching.
That's a new mower all the way around
lol yeap, it's should be good for warranty now.
It did upset me, watching you put all those extra nuts on the allthread, you only needed 2 nuts to pull, Then, on the tree, the first nut, you did fine by starting at the 12:00 position, so gravity worked for you, not with you... BUT, then I thought about it.... EVERYBODY has to learn, at least you put in the effort, Good job!
Yes it was a tough go, wish I had call Hardee first, the shop guy over there told me how to get it off. after doing what he told me it came right off with no problem. Just goes to show you, you never get to old to learn something new. at 65 years of age that thing beat me down. 🤣 Thanks for the comment, and thanks for watching.
@@brushhogginginthedirtysout5645 Yup, I'm 63, and own an auto shop, I get beat down e-v-e-r-y day, All ya gotta do is put 1 foot in front of the other, and that's exactly what ya did my man,
Thanks again.
Man you have really really outdone yourself on that mower. Look good my friend
Thanks I'm almost done with it. Time to put it to work.
Man they hooked you up😊😊
Yes, they did, they done a fine job.
Safety is important
Ur absolutely right. Thank's for watching.
You're going to enjoy that mower.
Yes I am. lol
how do you like it so far?
It’s working great.
I see that stump jumper won that match 🤔
Yes it did. lol
Nice 😊
thanks for watching.
GREAT VIDEOS!!!
Thanks bro.
Cuz I really enjoy your videos
I have 2 more videos that are uploading right now. they should be released sometime this evening between 4 and 6 o'clock. thanks for watching, be sure and subscribe to the channel, it's free. Thanks again.
Already subscribed we'll be looking for the other 2 this evening
@@harryreedjr9782 ok the one you watch is one of them. the other one is already uploaded, I just need to set it to public viewing once I get home from work. I didn't want it to show up first. thanks for subscribing.
KEEP THEM COMING
Thanks bro.😀
What the cost of a job like this on my case tractor
I paid $1,150.00 to have it done.
Can’t wait to see this thing in action! It looks great so far!
Thanks, that makes two of us. I do have new blades for it, just got to get the old ones off. I made a attempt today to remove them, but I'm thinking I may need a torch. Thanks for watching.
That's a lot of tractor
Yes it is. lol😁
💪❤️
lol😂😅
Looking good
Thanks Joe.
Man you have really impressed me with this 1442 mower
Thank you very much my friend.
You have that mower looking good🙂
Thanks bro. still working on it.
I have a small farm and bought a brand new Case farmall 55 in 2018. Very easy to use for a newbie and perfect for our needs. Had a small problem in the beginning where the tractor went into limb mode because of some kind of small debris in the fuel line interferred with the fuel injector. The Case factory took the cost for fixing the problem as good will and I'm after that a huge Case fan❤.
Good deal, I have enjoyed mind from the very first day I received it. Thanks for watching, and thanks for the comment.
Take it to caterpillar or call them to get the packing
I talk to a guy today I'm taking it to him Friday for packing. I wanted to do it myself, just to see what it`s like. Thanks for watching.
I see you have it coming alone my friend..
Yes I do, just waiting on parts to come in. I'm still working on this house also.
Man, that's a good looking bushhog!
Thanks bro.
I got to have me a DJI
Go ahead and get one Bro.
I see you putting in work. Great videos keep them coming
Thanks bro. trying to get use to doing these roof inspection for my next job, as a retired ole man. lol
That’s a Cadillac there pops
Yes, I will agree it`s nice. thanks for the comment, and thanks for watching.
Love the video. Were you using 4k,2.7, or 1080p?
I was in 4K with a ND/PL #32 gimbal lens filter. And also, a sunshade hood mounted on the drone. Thanks for the question, and thanks for watching.
Nice video. Keep them coming 🎉
Thanks bro.
I love that
I can still remember me taping my phone to kite so i could get aerial videos😅. I couldn't afford a drone back then. Now i own 2 phantoms. Nice video❤
Lol, I have the one drone right now, but thinking about upgrading. Another one would be great as a as a spare. Thanks for the comment, and thanks for watching.
I did enjoy thanks. Enjoy hobby
Glad you enjoyed it, thanks for watching, and have a great day.
What drone do you have? I have been looking around wanting to get one also
It's a older drone, about 7 years old. it's a DJI Mavic Pro. Thanks for the question, and thanks for watching.
I love that hydraulic 3rd arm.
Thanks Bro. I also have a hydraulic tilt system on the right side as well. Thanks for watching.
I borrowed one of those land planes from friend of mine. It did great on gravel driveway.
I've had this one for 2 years. This is my second time using it. thanks for the comment, and thanks for watching.
Tips are interchangeable pretty cool ill just buy the middle busters and get the subsoiler tip for 12.99
ok cool, thanks for watching.