How does it fill now. By that I mean when you’re pumping gas does it shut off a lot? Also was wondering if when I do it would it be any better to install the skid plate cut the top where you could put the tank in from the top?
@DytliefMoller Жыл бұрын
@chriswaller6902 Жыл бұрын
Do you still have the 68 waggy?
@phillipbouchard4197 Жыл бұрын
Looks like a solid Old Wagoneer. Should you choose to rebuild it get rid of the Buick 350 unless you find it to be salvageable. My Uncle had a 1971 Jeep J - 4000 pickup in the same green color which he bought new with the Buick 350 and he went thru 2 of these over the course of the trucks lifetime. A much better engine is the AMC 360 V8 which would bolt right in. Good luck with the project !
@rockymountboy Жыл бұрын
Worked for me. Don't tighten too much!
@danieljuza15552 жыл бұрын
「動画の音が良くない」、
@user-se8ds8zo4m2 жыл бұрын
Your content is so touching
@simonfoote30972 жыл бұрын
Cheers mate, very helpful as mine has a fair bit of slack. How about a video on how to change the steering damper.
@khangbao74562 жыл бұрын
how did you do it can you share with me , thank you
@stellito0072 жыл бұрын
thx Bro
@manirajapalanichamy73312 жыл бұрын
so touching for an excellent video
@joefrank51853 жыл бұрын
What bumper and lights do you have on it?
@deelocsta64k3 жыл бұрын
No Help
@jonathan97393 жыл бұрын
Yeah! More Wagoneer videos!! 👍👍
@tobytollefsen88023 жыл бұрын
So EZ. Thank you.
@smokey2dopeee963 жыл бұрын
Thank you for this. What year is your wj.
@ckcmcr127883 жыл бұрын
Where u get that bumper ???
@dregram76383 жыл бұрын
Does this stop the death wobble?
@diekatzefliegt3 жыл бұрын
I'm gonna say no, but good luck man
@stewardmiddleton27563 жыл бұрын
Nice bumper dude..
@stewardmiddleton27563 жыл бұрын
Where did you get the bumper?
@bladerunner24344 жыл бұрын
I know others have done this mode and a few months later had to replace entire gearbox due to failure.
@junker11111113 жыл бұрын
That's what happened to me. Not sure this is a good thing to do. The steering wheel play on my vehicle appears to be in the column somehwere running from the steering box to the steering wheel.
@pitbullforge3 жыл бұрын
@@junker1111111 possibly steering linkage? Cuz I was about to do this tomorrow. But if its not a good idea. Im gunna check the linkage
@junker11111113 жыл бұрын
@@pitbullforge The play in the steering appears to be in the intermediate steering shaft. That's the part that connects the steering column to the steering gear. I've had someone turn the steering wheel slightly and that movement does not reach the steering gear box. Somewhere in the intermediate shaft u-joints or the telescoping shaft the movement of the steering wheel is lost causing the steering wheel to move right and left without the wheels turning. I read where another replaced the inter. shaft and the play was gone. Tightening the steering gear screw puts a lot of pressure on the parts internally and mine failed within a few months of making this adjustement. Hope this info helps.
@pitbullforge3 жыл бұрын
@@junker1111111 I'm sure ill make use of it friend. Thank you
@kwmoore34644 жыл бұрын
I need to check this on my WJ
@redacted88464 жыл бұрын
Can this help with death wobble?
@juancordero58044 жыл бұрын
Very good👍exelent color. Hi to Puerto Rico
@silvius16864 жыл бұрын
What size is that Allen key? 5 mm is too big
@ar19134 жыл бұрын
I was wonder if you guys make conversation brackets for the Jeep wj front bumper to the jk bumper?
@bladeslicemaster53904 жыл бұрын
There ain't no updates because he figured out that this "find" is actually a piece of crap.
@chriswaller6902 Жыл бұрын
Always good for parts if nothing else.👍
@ttocskael93094 жыл бұрын
Thanks heaps for taking the time to explain each step. I'm currently doing the same and your video has cine in very useful. Cheers🤙
@jedidias70914 жыл бұрын
Does it need to be on Jack stand to do this??
@poundermonster4 жыл бұрын
Question, my steering wheel has 2 inches of play. Steering was loose, did what you said. Now is nice and tight, still has 2 inches of play though, You think is time to replace gear box?
@paizley96664 жыл бұрын
NOBODY DO THIS MAKE SURE TO HOLD TENSION ON YOUR ADJUSTMENT ALLEN OTHERWISE YOULL OVER ADJUST
@santiagohernandez..4 жыл бұрын
This is awesome
@Amarillobymorning7774 жыл бұрын
That front bumper lRocks. Greetings from Toluca Mexico.
@02jeepwj4 жыл бұрын
affordable offroad makes a kit now that you dont have to make a hole in the frame or anything jsut cut out spare tire
@alansorensen77124 жыл бұрын
So... wanting to do this... I have been looking under mine and if I cut my tank skid and raise it I'm going to hit my exhaust... what does everyone having going on in that department? Where does your exhaust end?
@rangerdanger7664 жыл бұрын
lost your target adjustment when u tightened locknut
@kickinwinghotboi8834 жыл бұрын
Should've kept the allen wrench on there. I work on hydraulic heavy machinery and the lock valves, flow control valves, etc.. are the same setup and you HAVE to keep the allen in there otherwise you'll mess up your adjustment and on that equipment, the slightest turn will throw everything out of adjustment I work on aircraft loaders and aircraft pushback tractors
@guswendt4 жыл бұрын
With your otk setup did you do any type of track bar relocation?
@kevinparrish49684 жыл бұрын
Dude. This video saved my day. Thank you!
@jdwhit_73805 жыл бұрын
What year Jeep is this?
@mikebennett60015 жыл бұрын
Man Ive got one I'm building right now with a IRO 4 link rear !hanks my man!
@hawaiiknifeandgear55315 жыл бұрын
Super helpful, you just earned yourself a subscriber
@bobsmith76015 жыл бұрын
what year is this Cherokee. I have an 06 and i hope it's the same as this one. looks easy
@gdecol37625 жыл бұрын
Good video. But, as with just about every similar one I've seen (all USA ones), the lock-nut turns the same way as every nut i.e. anti-clockwise to loosen. Having trashed my steering box doing this, I found that on my XJ the lock-nut is the opposite way, i.e. clockwise to loosen! Maybe it's because it's a right-hand drive car, although I cant see how that makes any difference to a locknut, or because it's a European spec or something. No idea how to tell until you either do your adjustment or break something.!!
@kevinulett52765 жыл бұрын
Nice video dude. Thanks
@MustAccord5 жыл бұрын
Also, if you thighten it too much. The steering wheel will have feedback of each bump you run over. I had to loosen mine a tad, to have slight play. Otherwise was a bit uncomfortable to drive when the steering wheen moves with each bump.
@ttocskael93095 жыл бұрын
Informative video! How many hours in total did it take you to do the tank tuck?
@jonathanryan29155 жыл бұрын
Just like the old GM steering boxes
@nickhastings64655 жыл бұрын
Will this work on an XJ 91 4x4?
@takeawaykitty.5 жыл бұрын
Thank you for confirming my thoughts on the matter poor old girl had about 1½inches of play making me look drunk going down the highway. Nice and tight now
@Rubicon145 жыл бұрын
Gear wrench
@UnSociableOne5 жыл бұрын
Just from 12 oclock to 2 oclock fixed my wandering.
@jesusrperezd2 жыл бұрын
Hi, can you describe please the problem you had? I have a binding or clank sound in tight turns when it is on 4x4, I replaced and checked almost all in the power train
Пікірлер
How does it fill now. By that I mean when you’re pumping gas does it shut off a lot? Also was wondering if when I do it would it be any better to install the skid plate cut the top where you could put the tank in from the top?
Do you still have the 68 waggy?
Looks like a solid Old Wagoneer. Should you choose to rebuild it get rid of the Buick 350 unless you find it to be salvageable. My Uncle had a 1971 Jeep J - 4000 pickup in the same green color which he bought new with the Buick 350 and he went thru 2 of these over the course of the trucks lifetime. A much better engine is the AMC 360 V8 which would bolt right in. Good luck with the project !
Worked for me. Don't tighten too much!
「動画の音が良くない」、
Your content is so touching
Cheers mate, very helpful as mine has a fair bit of slack. How about a video on how to change the steering damper.
how did you do it can you share with me , thank you
thx Bro
so touching for an excellent video
What bumper and lights do you have on it?
No Help
Yeah! More Wagoneer videos!! 👍👍
So EZ. Thank you.
Thank you for this. What year is your wj.
Where u get that bumper ???
Does this stop the death wobble?
I'm gonna say no, but good luck man
Nice bumper dude..
Where did you get the bumper?
I know others have done this mode and a few months later had to replace entire gearbox due to failure.
That's what happened to me. Not sure this is a good thing to do. The steering wheel play on my vehicle appears to be in the column somehwere running from the steering box to the steering wheel.
@@junker1111111 possibly steering linkage? Cuz I was about to do this tomorrow. But if its not a good idea. Im gunna check the linkage
@@pitbullforge The play in the steering appears to be in the intermediate steering shaft. That's the part that connects the steering column to the steering gear. I've had someone turn the steering wheel slightly and that movement does not reach the steering gear box. Somewhere in the intermediate shaft u-joints or the telescoping shaft the movement of the steering wheel is lost causing the steering wheel to move right and left without the wheels turning. I read where another replaced the inter. shaft and the play was gone. Tightening the steering gear screw puts a lot of pressure on the parts internally and mine failed within a few months of making this adjustement. Hope this info helps.
@@junker1111111 I'm sure ill make use of it friend. Thank you
I need to check this on my WJ
Can this help with death wobble?
Very good👍exelent color. Hi to Puerto Rico
What size is that Allen key? 5 mm is too big
I was wonder if you guys make conversation brackets for the Jeep wj front bumper to the jk bumper?
There ain't no updates because he figured out that this "find" is actually a piece of crap.
Always good for parts if nothing else.👍
Thanks heaps for taking the time to explain each step. I'm currently doing the same and your video has cine in very useful. Cheers🤙
Does it need to be on Jack stand to do this??
Question, my steering wheel has 2 inches of play. Steering was loose, did what you said. Now is nice and tight, still has 2 inches of play though, You think is time to replace gear box?
NOBODY DO THIS MAKE SURE TO HOLD TENSION ON YOUR ADJUSTMENT ALLEN OTHERWISE YOULL OVER ADJUST
This is awesome
That front bumper lRocks. Greetings from Toluca Mexico.
affordable offroad makes a kit now that you dont have to make a hole in the frame or anything jsut cut out spare tire
So... wanting to do this... I have been looking under mine and if I cut my tank skid and raise it I'm going to hit my exhaust... what does everyone having going on in that department? Where does your exhaust end?
lost your target adjustment when u tightened locknut
Should've kept the allen wrench on there. I work on hydraulic heavy machinery and the lock valves, flow control valves, etc.. are the same setup and you HAVE to keep the allen in there otherwise you'll mess up your adjustment and on that equipment, the slightest turn will throw everything out of adjustment I work on aircraft loaders and aircraft pushback tractors
With your otk setup did you do any type of track bar relocation?
Dude. This video saved my day. Thank you!
What year Jeep is this?
Man Ive got one I'm building right now with a IRO 4 link rear !hanks my man!
Super helpful, you just earned yourself a subscriber
what year is this Cherokee. I have an 06 and i hope it's the same as this one. looks easy
Good video. But, as with just about every similar one I've seen (all USA ones), the lock-nut turns the same way as every nut i.e. anti-clockwise to loosen. Having trashed my steering box doing this, I found that on my XJ the lock-nut is the opposite way, i.e. clockwise to loosen! Maybe it's because it's a right-hand drive car, although I cant see how that makes any difference to a locknut, or because it's a European spec or something. No idea how to tell until you either do your adjustment or break something.!!
Nice video dude. Thanks
Also, if you thighten it too much. The steering wheel will have feedback of each bump you run over. I had to loosen mine a tad, to have slight play. Otherwise was a bit uncomfortable to drive when the steering wheen moves with each bump.
Informative video! How many hours in total did it take you to do the tank tuck?
Just like the old GM steering boxes
Will this work on an XJ 91 4x4?
Thank you for confirming my thoughts on the matter poor old girl had about 1½inches of play making me look drunk going down the highway. Nice and tight now
Gear wrench
Just from 12 oclock to 2 oclock fixed my wandering.
Hi, can you describe please the problem you had? I have a binding or clank sound in tight turns when it is on 4x4, I replaced and checked almost all in the power train