thank you for sharing if i want change the seat for saddleman i should be remove the adjustable rider backrest ?
@rtabcum6 күн бұрын
yes. Changing seat will require you to remove the backrest.
@_Common_Logic_26 күн бұрын
Nice job with the install, but I did a couple of things to clean it up a bit more... I (like you) don't have T-Signals hanging from the spots so I shortened up the threaded mounting stud a bit... In addition, the housings are "grounded" to the mount, itself with no need for a second wire, leaving you with One tiny lead wire (on mine. Maybe two on yours)... This allowed me to drill a small hole directly in the ends of the light bar, and and a little larger (elongated) one out of sight to the rear at the center of the bar... EASY as pie to run the little wire inside the tubing and exit under the steering head rather than have them looped out in front of your ride. Shovelheads had this in the 1970s, and for some reason Harley dropped the ball and went BACKWARDS on tons of design features on the King vs the old Glides. Don't get me started on the "chromed" PLASTIC parts. LOL Now if we could just get the bulb manufacturers to make the stupid halo ring AMBER, allowing riders to get the ugly turn signals off of the bars, and keeping things clean... Hope they see this. :))
@rtabcum6 күн бұрын
All great ideas!
@antchung2370Ай бұрын
I own the spider with 2 speed gear and a light weight os 2.5.. Pretty much maxed out for racing track.. Mind this model was born with a 1.8..
@user-ym5xl2dc8lАй бұрын
Today I finally made a decision on how to connect brake lights to tail lamps! victory! kzread.info/dash/bejne/Zm2V0ahmh9PWorw.html
@lococorkАй бұрын
Thank you very helpful. Even though I have an OM612, it was mostly the same. I started out to replace my leaking high pressure fuel pump but after seeing how much needed to come off, I ended up replacing my thermostat, water pump, all pulleys and tensioner, alternator, and all hoses for coolant and turbo. Definitely the way to go! Those speed clips holding the bottom of the ac radiator were a real bitch to get back on. I ended up using a pair of tweezers to hold the clip in place to catch the screw. I also have a Forest River BTW w/165K. D
@smoothsam7Ай бұрын
Hi Russ I love your videos I have the same bike and will be doing most of the things that you have done especially the shocks though I have taken an interest in the new 2024 roadglide still have to test ride
@kwhopper54092 ай бұрын
Are all three lights flush with each other?
@luccerio2 ай бұрын
❤❤
@fredaraujo63452 ай бұрын
I also saw this video . It's much easier. kzread.info/dash/bejne/dnaOt8WBfbreZps.htmlsi=k5ixrYjqVSNS_DhW
@almohandskhaild2 ай бұрын
It cool flow fan worth to buy it ?
@mik3ramo52 ай бұрын
Great instructional Video, thank you for putting that out for us fellow HD Riders!
@glenryan65692 ай бұрын
Would have been nice seeing it run
@SK-vr2ei2 ай бұрын
Thank you. This helps.
@SK-vr2ei2 ай бұрын
Safe riding!
@dkoals2 ай бұрын
Thanks for posting these videos, I really appreciate it!
@Apangard3 ай бұрын
Personal tip: Remove the headlight for the best access
@digchilli3 ай бұрын
Perfect, thank you.
@MrMurphc133 ай бұрын
What windshield is on your special sir?
@bouldernelsonbigfoot3 ай бұрын
thx
@MrMurphc133 ай бұрын
How is the battery 3 years later?
@EarlWardJr4 ай бұрын
I think I like it, for a 3.6 L V6. I am fixing to do mine, not a lot of droning sound. when idle it sounds a little raw and throaty which is good. Thanks for this video , its very helpful.
@sonyou984 ай бұрын
Why would anyone give a shit when it was manufactured? These guys are out on the highway. Be careful 😂
@BigTee30994 ай бұрын
I just ordered these shocks for my 2012 Roadglide. I’m looking forward to having them installed, along with Ohlins fork cartridge kit. I heard my bike won’t be the same once installed. 👍
@tezy01934 ай бұрын
what Oo .. a 4 stroke? i never heard of them, how awesome is that 🤯
@joshmills13434 ай бұрын
Anyway, to post a pic, or even send me a picture of how this bracket is supposed to be mounted? The tab on the bracket, Where does it go or where does it plug into or does it just sit underneath the frame? I have a hard time believing just one screw holds the thing tight.
@oveazeus14 ай бұрын
Thank you!
@davidanglin33585 ай бұрын
Are you RTCalifornia? That left a review of this muffler on Jegs website?
@lancmac5 ай бұрын
Activate the fan..... another $200...... hahahahahahah
@JoseCampos-jl8kq6 ай бұрын
Why?
@bradbike6 ай бұрын
Thank you.
@BDL.10106 ай бұрын
Thank you very much for this. It has been a huge help
@joshuajones50636 ай бұрын
Question why did you remove the saddle bag?
@Turk3806 ай бұрын
great mod! We just got a 2023 EUV and I'm gritting my teeth that GM f!@#$d up the tail lights from the 1st gen EV.. they *had* proper separate brake lights and amber turn signal lights. now they have the dumb AF North America-only combined brake/turn lights. I'm hoping to find a way to convert them eventually.
@dlogox27466 ай бұрын
oh just checked on weep holes..looks like the top hole is a weep hole need a place for air to escape.
@dlogox27466 ай бұрын
There is an open hole on the top side of the pump in line with the shaft. it is open right to the shaft. That hole should probably be plugged with a piece of rubber to keep crap from getting at the shaft. The old pump had nothing covering the hole? The new one does not come with anything covering that hole.
@dlogox27466 ай бұрын
so was the old pump bad or just corroded along the seal?
@Needcoffeeee7 ай бұрын
why did your odo reading increase with the new odometer?
@rp96747 ай бұрын
Probably best to go with a Starsky and Hutch Style magnetic roof light. The standard lighting is fine, but this is better
@dudleydorite76787 ай бұрын
How is your passengers back feel against the sissy bar with the sundowner? I bought the tallboy and it sits to high on the passenger back sissy bar
@512SolidSnake8 ай бұрын
It was hard to tell from video since you had the muffler on the ground, but if you were to look inside the inlet, can you see out the outlet side?
@derekam9820 күн бұрын
No, it’s not a straight through muffler
@PhilPontilllo-vk8ni8 ай бұрын
What did you do with the old speedo. I need one.
@LeandroFTW8 ай бұрын
Well, damn! I like it.
@kellybgliding8 ай бұрын
Great video. Im definitely going to look into those. Thanks and I’m subscribed
@user-we8ke4ms1c8 ай бұрын
Thank you so much for this video. I am seriously considering buying a Bolt EUV, and the placement of both the brake (and the turn signal) lights so low down is of great concern to me. I have not seen any other hatchback with this poor design, and I've been looking! Any suggestions about where one could have this modification done commercially in the SF Bay Area? This is not something I could do myself. Again thanks!
@VitaliyKhomich8 ай бұрын
The best sprinter water pump replacement video on KZread
@aisychannelone9 ай бұрын
❤❤❤❤❤
@BegoneJonah9 ай бұрын
"You can drop it quite easily into there, the abyss..." Yes - this is exactly what I did. I had to remove the battery... it took my son and I an hour to find the nut, which somehow got into a tube. Got it out with a magnetic probe. What a pain. Pro tip: Remove the battery! Also: If you have a plastic heat deflector, the bolt for it goes through the hole in the plate where the seat pull is located. It's what keeps it in place. H-D neglected to mention that in their poor instructions.
@twisttwister82549 ай бұрын
Excellent.
@unclebuck6814ful9 ай бұрын
2015 roadglide special, do I need dealer download ?¿?¿???
@mikemoultrie88299 ай бұрын
Did you ever change your spur gear to get better speed?
Пікірлер
thank you for sharing if i want change the seat for saddleman i should be remove the adjustable rider backrest ?
yes. Changing seat will require you to remove the backrest.
Nice job with the install, but I did a couple of things to clean it up a bit more... I (like you) don't have T-Signals hanging from the spots so I shortened up the threaded mounting stud a bit... In addition, the housings are "grounded" to the mount, itself with no need for a second wire, leaving you with One tiny lead wire (on mine. Maybe two on yours)... This allowed me to drill a small hole directly in the ends of the light bar, and and a little larger (elongated) one out of sight to the rear at the center of the bar... EASY as pie to run the little wire inside the tubing and exit under the steering head rather than have them looped out in front of your ride. Shovelheads had this in the 1970s, and for some reason Harley dropped the ball and went BACKWARDS on tons of design features on the King vs the old Glides. Don't get me started on the "chromed" PLASTIC parts. LOL Now if we could just get the bulb manufacturers to make the stupid halo ring AMBER, allowing riders to get the ugly turn signals off of the bars, and keeping things clean... Hope they see this. :))
All great ideas!
I own the spider with 2 speed gear and a light weight os 2.5.. Pretty much maxed out for racing track.. Mind this model was born with a 1.8..
Today I finally made a decision on how to connect brake lights to tail lamps! victory! kzread.info/dash/bejne/Zm2V0ahmh9PWorw.html
Thank you very helpful. Even though I have an OM612, it was mostly the same. I started out to replace my leaking high pressure fuel pump but after seeing how much needed to come off, I ended up replacing my thermostat, water pump, all pulleys and tensioner, alternator, and all hoses for coolant and turbo. Definitely the way to go! Those speed clips holding the bottom of the ac radiator were a real bitch to get back on. I ended up using a pair of tweezers to hold the clip in place to catch the screw. I also have a Forest River BTW w/165K. D
Hi Russ I love your videos I have the same bike and will be doing most of the things that you have done especially the shocks though I have taken an interest in the new 2024 roadglide still have to test ride
Are all three lights flush with each other?
❤❤
I also saw this video . It's much easier. kzread.info/dash/bejne/dnaOt8WBfbreZps.htmlsi=k5ixrYjqVSNS_DhW
It cool flow fan worth to buy it ?
Great instructional Video, thank you for putting that out for us fellow HD Riders!
Would have been nice seeing it run
Thank you. This helps.
Safe riding!
Thanks for posting these videos, I really appreciate it!
Personal tip: Remove the headlight for the best access
Perfect, thank you.
What windshield is on your special sir?
thx
How is the battery 3 years later?
I think I like it, for a 3.6 L V6. I am fixing to do mine, not a lot of droning sound. when idle it sounds a little raw and throaty which is good. Thanks for this video , its very helpful.
Why would anyone give a shit when it was manufactured? These guys are out on the highway. Be careful 😂
I just ordered these shocks for my 2012 Roadglide. I’m looking forward to having them installed, along with Ohlins fork cartridge kit. I heard my bike won’t be the same once installed. 👍
what Oo .. a 4 stroke? i never heard of them, how awesome is that 🤯
Anyway, to post a pic, or even send me a picture of how this bracket is supposed to be mounted? The tab on the bracket, Where does it go or where does it plug into or does it just sit underneath the frame? I have a hard time believing just one screw holds the thing tight.
Thank you!
Are you RTCalifornia? That left a review of this muffler on Jegs website?
Activate the fan..... another $200...... hahahahahahah
Why?
Thank you.
Thank you very much for this. It has been a huge help
Question why did you remove the saddle bag?
great mod! We just got a 2023 EUV and I'm gritting my teeth that GM f!@#$d up the tail lights from the 1st gen EV.. they *had* proper separate brake lights and amber turn signal lights. now they have the dumb AF North America-only combined brake/turn lights. I'm hoping to find a way to convert them eventually.
oh just checked on weep holes..looks like the top hole is a weep hole need a place for air to escape.
There is an open hole on the top side of the pump in line with the shaft. it is open right to the shaft. That hole should probably be plugged with a piece of rubber to keep crap from getting at the shaft. The old pump had nothing covering the hole? The new one does not come with anything covering that hole.
so was the old pump bad or just corroded along the seal?
why did your odo reading increase with the new odometer?
Probably best to go with a Starsky and Hutch Style magnetic roof light. The standard lighting is fine, but this is better
How is your passengers back feel against the sissy bar with the sundowner? I bought the tallboy and it sits to high on the passenger back sissy bar
It was hard to tell from video since you had the muffler on the ground, but if you were to look inside the inlet, can you see out the outlet side?
No, it’s not a straight through muffler
What did you do with the old speedo. I need one.
Well, damn! I like it.
Great video. Im definitely going to look into those. Thanks and I’m subscribed
Thank you so much for this video. I am seriously considering buying a Bolt EUV, and the placement of both the brake (and the turn signal) lights so low down is of great concern to me. I have not seen any other hatchback with this poor design, and I've been looking! Any suggestions about where one could have this modification done commercially in the SF Bay Area? This is not something I could do myself. Again thanks!
The best sprinter water pump replacement video on KZread
❤❤❤❤❤
"You can drop it quite easily into there, the abyss..." Yes - this is exactly what I did. I had to remove the battery... it took my son and I an hour to find the nut, which somehow got into a tube. Got it out with a magnetic probe. What a pain. Pro tip: Remove the battery! Also: If you have a plastic heat deflector, the bolt for it goes through the hole in the plate where the seat pull is located. It's what keeps it in place. H-D neglected to mention that in their poor instructions.
Excellent.
2015 roadglide special, do I need dealer download ?¿?¿???
Did you ever change your spur gear to get better speed?
My light keeps coming back