Пікірлер

• 
  @mcemtpockets177517 сағат бұрын

  Sub 250 is important to me

• 
  @tinkerzlab16 сағат бұрын

  It is too me as well. They're getting so restrictive in the USA that eventually that's all we'll be able to fly.

• 
  @mcemtpockets177515 сағат бұрын

  @@tinkerzlab man...man..man.. Long reply alert. I feel we need a President who will bing back afterschool science programs and allow more tech club grants. Every American has a gun... Every Chinese has a drone! I feel we need to get the youth involved at a young age! Wanna make people feel good about learning science again! I have been researching regs for UAS regs. I found 55 lbs in the regs and .55lbs. But i have not seen 250 grams yet. I like to have things printed off. Never know what a police officer will or will not do! Also im a bit confused! State or county land you dont need AMA just 300k insurance when fling sub250g? Or AMA when flying on private land due to circumstance and flying club recs? Also since we are sub250 do i still need permit? I fly on my land and my neighbors most of them time. Or a park thats dang near empty when i want to strech the envelope. Thanks for reading and sharing ur education? Cant wait to learn more!

• 
  @tinkerzlab10 сағат бұрын

  @@mcemtpockets1775 Yes, I don't even know the current regs other than I think 250g and less is exempt from all the craziness. How long that will last is anyone guess.

• 
  @pierre-marcelgoral838119 сағат бұрын

  This aircraft is priceless, oh, and cheap at the same time. 😂 Once properly set up, even with the stock transmitter, it's a dream to fly. Tons of power, very maneuvrable, decent flight time with one lipo. Much faster with a 7*5 propeller and still unlimited vertical. Truly a gem. Only downside is that I had to reinforce tail assembly and motor mount with the big prop, but the motor is so powerful the weight gain is absolutely not an issue. Best bang for the buck ever. I absolutely ❤ adore it and recommend it to every average pilot interested. I don't recommend as a first plane, though. Very sensitive and responsive, it handles more like an extremely angry warbird than like a general aviation high wing monoplane. 😅

• 
  @tinkerzlab18 сағат бұрын

  I love this plane. I look at this one as the new standard for Brushless Sub-250g Planes. For the life of me I can't understand why FlyBear hasn't come out with a full line of Warbirds this size using the exact same electronics. They would literally fly off the shelves ;-)

• 
  @pierre-marcelgoral838118 сағат бұрын

  @@tinkerzlab Exactly! I love the pun! 🤣 I'm expecting issues with my bank this summer: I plan to buy the 500mm Volantex P-51D brushless 1S, the QF SU-35, it will be my first jet rc mini, and maybe the qidi bush plane. All in all I'm happy FlyBear didn't do that, this way I'll still be able to do other things with my credit card... 🤣

• 
  @tinkerzlab18 сағат бұрын

  @@pierre-marcelgoral8381 I'm eager to see how the Volantex Brushless P51D 500mm Warbird flies. I understand it has a brushless motor but still has a gearbox? I've been having ESC issues with the QF SU35 so you may want to pass on that one. I get constant motor cuts from the ESC even after I MOD'd it with more airflow venting. It seems they didn't install an ESC that is reliable. Such a shame as it's such a good airframe and I really enjoy flying that one. I just replaced all the electronics in mine except the motor. I'm in the process of getting it setup again on 3S ;-) I think I have one more flight video of the SU25 to post while it was still stock. Then some 3S flights.

• 
  @pierre-marcelgoral838117 сағат бұрын

  @@tinkerzlab It was a rumour based on fake pictures on Ali, but RC forums guys said on the dedicated topic that it's a direct drive brushless motor. Last comments tend to indicate the ship is fast and good in vertical (maybe not like the Flybear SBACH but better than the XK A280, being half the weight.) I'll order one as soon as I get back home. As for the SU35, I indeed read that its ESC tends to overheat, to the point of melting solder points !! Some have the issue, some have not. Maybe it's a winter flying aircraft. 😁 Some enhanced the cooling using enlarged air scoops, with or without results. Some changed the ESC to satisfaction. I might pass on this one, but tinkering on airflow inside the ship kind of interest me. Like a "Challenge accepted" ring in my head. 😁 And I want to try a jet. I don't like the idea of a silhouette aircraft, and I don't want to buy brushed motored RC aircrafts anymore, I've got plenty of them. 😅

• 
  @tinkerzlab16 сағат бұрын

  @@pierre-marcelgoral8381 ;-)

• 
  @pierre-marcelgoral838120 сағат бұрын

  Hi Tony, I don't own any bush plane yet and since I operate on a short grass field I hand launch and belly land all my aircrafts. I might pull the trigger on this one in order to train in real take off and landing. Would it be a good idea, or despite its wheels it would be unable to taxi on short grass? Happy flying, sir, thanks again for your Flybear Sbach vids, I really adore this ship ❤! 😊👍 See you in the air!

• 
  @tinkerzlab19 сағат бұрын

  I think if it was really short grass it might do ok. The best landing gear I've seen for a micro bush plane is the Arrows Pioneer. It has those really soft, fat, balloon tires and I was able to take off from that rough terrain I use just fine with that plane. You might be able to adapt the landing gear from that plane to this one or mod it with larger wheels ;-) That FlyBear SBACH is definitely a Keeper!

• 
  @ErnestPJay23 сағат бұрын

  Is this the groundcontrol rc channel?

• 
  @tinkerzlab20 сағат бұрын

  It's not the Ground Control RC Channel but it's operated by the same folks. Here's the Ground Control RC Channel: www.youtube.com/@GroundControlRC

• 
  @larsschilling6040Күн бұрын

  Hello greetings from Germany haha, so my English is not that good. I have that plane 2 times so i can fly alone and have more than one akku and if i want to fly with a friend i have two of them. So my question is about the probs im new to this hobby and i want to know if i buy a different prob if it flys faster or something im not that hard into modifying i dont have that much knowledge but to change a prob is quite easy. So my question is if a new prob is going to be better and witch one would you reccomend. And secondly you upgraded the wheels, i want also bigger ones to land on gras, do you think that is possible and what do i need to look for ? I like your Videos a lot thanks for the whole inputt i bought it for 80€ in a sale and i like it way more than the little warbirds.

• 
  @tinkerzlabКүн бұрын

  Your English is as good as mine! I think the stock prop is a very good prop for this motor on a 2S LIPO. I've test several prop and the one I fly with is the Gemfan LR 7035 2-Blade Prop. The power and speed are about the same as the stock prop but I think you get slightly more flight time with it. The larger wheels I put on mine would work well on short grass much better than the stock wheels and they work very well in the area in which I fly. Here are links to the props, wheels, and wheel collars I use. RC Airplane Micro Sport Wheel 0.07 Inch X 2.16 Inch - 6PCS amzn.to/3NRIk8C 20Pcs Landing Gear Stopper Set, Wheel Collar 2.1mm Stainless Steel amzn.to/3vqiFxp s.click.aliexpress.com/e/_DeGlFdV Gemfan LR 7035 2-Blade Prop 8pcs 4CW 4CCW amzn.to/3Qws3qK s.click.aliexpress.com/e/_DB5g5Cn I hope that helps and I'll see you in the Air!

• 
  @commanderveecock3985Күн бұрын

  I’ve just got this model, based on your review and want to set it up as per your settings. However I’m a relative newbie and you’ve lost me when it comes to setting the deflection rates. What is the process for doing this as the percentages are so small. Hoping you can explain or, better still, do a video showing the process for people like me. Loving the channel.

• 
  @tinkerzlabКүн бұрын

  The deflection is the amount of movement of the control surfaces. For the Ailerons and Elevator it's the distance the control surfaces move up and down. For the Rudder it the distance the control surface moves left and right. I try to measure this inline with the Control Horns in Manual Mode. The amount of movement for a control surface can be increased / decreased based on the amount Dual-Rate you have programmed into the Transmitter as well as how the Control Linkage is setup between the servos and control horns. If you download My Setup File, it's a PDF document and there is a link to it in the Show Notes, you'll have all this information as reference. It covers all the information needed to get it setup exactly as I have mine. As stated in the video, for a beginner the default setup is great. Except for modifying the linkage, the other aspects (Dual-Rate, EXPO) will only be important if you have a Programmable Transmitter that can bind to the plane. I'm not sure if you'll be flying with the Stock TX or a Hobby-Grade TX? This Video may be of help. I published it to explain how to use our Setup Files. I don't provide My OpenTX Files anymore but in the latter half of the video it explains the Setup File. kzread.info/dash/bejne/nIeepsZ8ps3Kd7Q.html

• 
  @commanderveecock3985Күн бұрын

  Thanks. I do have a radiomaster tx so I’m hoping to copy your settings. I’ll watch the video to see if I can make some more sense of it as this aircraft appears to have the capacity to be pretty aerobatic. Out of interest, have you tried inverted flight with it or is that pushing it too far?

• 
  @tinkerzlab20 сағат бұрын

  @@commanderveecock3985 I haven't tried inverted flying but I certainly think it's capable. You're going to love this plane ;-)

• 
  @_Danilo_L.2 күн бұрын

  my QF009 also has motor cut on most flights i do. I flight this modell since one month, and not only motor cuts, also hot LIPO and bad reactions by full speed flight. It is a little bit agressive, i think cause the mix of aillerons and elevator, an cheap solution.

• 
  @tinkerzlab2 күн бұрын

  I had a hard time with the controls using the Stock TX and had to adjust the linkage to make the controls easier. It handles nicely with a full size TX. It's a great airframe but I'm replacing the electronics on mine due to the constant motor cuts.

• 
  @mcemtpockets177517 сағат бұрын

  I would fly every day if i had a spot like that!

• 
  @mcemtpockets177517 сағат бұрын

  Very good info.

• 
  @mcemtpockets177517 сағат бұрын

  4:21 man man man... hope the air works

• 
  @mcemtpockets177517 сағат бұрын

  Thanks for sharing

• 
  @scable-eq7bp4 күн бұрын

  Great presentation, I purchased the PNP play version and then ordered the T8S transmitter that came with a receiver, but it was the wrong receiver, there was no place on this receiver to plug that 3rd wire coming off the speed control, and without that wire connected it would not bind. After a little research I ordered the right receiver , installed it and the binding went smoothly except the ailerons were backwards, great how do I fix this when the transmitter is not a computer style, after going through the manual I found that there's a little button on the front of the gyro you push to change the direction of the control surfaces. I flew it a few days ago and found it to be a very capable aircraft, I kept the throw rates at what was set from the factory, I fly a lot quick combat wings so I'm used to a lot of deflection movement. I did order a second one of these but in the RTR version, setup should be easier....

• 
  @tinkerzlab4 күн бұрын

  Thanks! Yes, the T8S is programmable via a Bluetooth App you can install on your Android Phone or Windows Computer. Not sure why the Elevons weren't moving in the correct direction but maybe that channel is reversed in the RTF version TX. A very capable and great flying Sub-250g Plane. I have a blast with mine and I use a 3S LIPO in mine....Unlimited Vertical ;-) I'm glad you got one....or two!

• 
  @MrUpchukov6 күн бұрын

  What's the other one of your top 2 sub 250gr parkjets?

• 
  @tinkerzlab6 күн бұрын

  My Favorite Factory Sub-250g Parkjet is the Radiolink Su27. It's the only Factory Sub-250g Parkjet I've flown that can compete with My GFS DIY F-22 Micro. Radiolink SU27 Beginner Fighter Jet Brushless Sub-250g with Gyro PNF/RTF amzn.to/48gvM2q s.click.aliexpress.com/e/_DEEGJvx www.banggood.com/custlink/vGvVsGZGGd

• 
  @tinkerzlab6 күн бұрын

  Here's the Playlist for the SU27. Radiolink SU27 Jet kzread.info/head/PL_YiEhY7O1WYpdqFhJZe_67oc4ZbWRnP1

• 
  @MrUpchukov6 күн бұрын

  @@tinkerzlab Thank you!

• 
  @snauzze70077 күн бұрын

  Have you thought of changing motor to a 10mm instead of the 8mm ? And have you experimented with a bigger battery like a 1s 800 …u can find some batteries are lighter than others of the same mah

• 
  @tinkerzlab6 күн бұрын

  This 4CH version actually has a 10mm motor. I've used everything from a 1S 400mah to a 600mah LIPO. A 1S 600mah LIPO is the largest I have and you get a tremendous amount of flight time even with the stock LIPO. When the stock 10mm brushed motor wears out I'll convert it to brushless ;-)

• 
  @snauzze70073 күн бұрын

  @@tinkerzlab from the description it says 8mm …when I had the Ranger 600 3 channel it had the same …I was going to to put a 10mm in it but never did

• 
  @GroundControlRC3 күн бұрын

  @@snauzze7007 Not from the link I provided. If you're looking at the specs of a different vendor they may be selling the 3CH version not the 4CH version.

• 
  @snauzze70073 күн бұрын

  @@GroundControlRC so it is 10mm not 8mm

• 
  @GroundControlRC3 күн бұрын

  @@snauzze7007 Yes, on the 4CH version it's a 10mm Hollow Cup Brushed Motor. You could always put a brushless motor on it. That's what I'm going to do when the stock motor wears out.

• 
  @lasersbee9 күн бұрын

  The majority of the prop wash is blowing Between the rudders..... As long as you have forward speed the rudders should be OK.

• 
  @tinkerzlab9 күн бұрын

  I agree, given that tunnel between the Rudders I thought they would be more effective than they were in this initial test but I have plenty of adjustment available. With all that air coming off that pusher motor directed at the Rudders I think it should perform nice stall turns with a bit of throttle engaged. I'll be taking it out again soon to test after some adjustment. It is nice having those Rudders ;-)

• 
  @tinkerzlab11 күн бұрын

  ONLY $70.99 using My Link & Coupon Code BGfc7572: ban.ggood.vip/14ZuP

• 
  @tinkerzlab11 күн бұрын

  ONLY $71.99 using My Link & Coupon Code BG9f8588: ban.ggood.vip/14ZuO

• 
  @lasersbee11 күн бұрын

  This one is affordable and ships to Canada at a reasonable Shipping cost. Thanks for the TX16S Protocol.

• 
  @tinkerzlab11 күн бұрын

  That's good to hear. I can't wait to take it out again to get it completely tuned...its so close ;-)

• 
  @mcemtpockets17757 күн бұрын

  I gotta get a better tx. I have fkysky

• 
  @mcemtpockets17757 күн бұрын

  Very very good review❤😊

• 
  @tinkerzlab7 күн бұрын

  @@mcemtpockets1775 Thank You!

• 
  @richardchapman634012 күн бұрын

  Wait until you get the new 500mm volantex Mustang .

• 
  @tinkerzlab11 күн бұрын

  Nice! I see they finally came out with a Brushless Version....Sweet!

• 
  @maxineneale12 күн бұрын

  Thank you ~ Brilliant

• 
  @tinkerzlab12 күн бұрын

  Thank you so much ;-)

• 
  @jamesdalby-r3v14 күн бұрын

  I’m looking forward to the maiden flight! Would love to know your opinion when you have done the maiden if you think the qidi 560 is better than this 1?

• 
  @tinkerzlab13 күн бұрын

  Thanks! I'm curious as well. I think if they used the same gyro the FlyBear SBACH has it's going to be awesome.

• 
  @MasonWilson-si3mv14 күн бұрын

  This really helped thank you

• 
  @tinkerzlab14 күн бұрын

  I'm glad that helped. With so many options it can get confusing. See you in the Air!

• 
  @lasersbee15 күн бұрын

  It rolls straight as an arrow....

• 
  @tinkerzlab15 күн бұрын

  Thanks! I was so surprised that the very 1st build turned out so well.

• 
  @PiTon5915 күн бұрын

  Is the cable with connector to the board supplied with the R8FM receiver or have you soldered the wires directly to the board? Or do you have an idea what the correct name of the connector is? tnx Tony

• 
  @tinkerzlab15 күн бұрын

  Whenever I have to retire a servo I snip off the wire lead before throwing away the servo. I found one of those wires from a micro servo was the correct size for the socket on the board. I crimped a normal servo connector on the other end to connect to the receiver. I think the socket has the pins spaced 1mm apart. Having some of those wire pigtails with 1mm and 1.25mm pitch connectors are handy to have in your toolbox.

• 
  @PiTon5915 күн бұрын

  thanks for your response, yes, always nice to give things a second life, I also have all kinds of stuff lying around here, but of course not that connector 😉, but no problem, I will solder the wire directly to the board. Happy flying

• 
  @tinkerzlab15 күн бұрын

  @@PiTon59 You are most welcome. Happy Flying!

• 
  @lasersbee18 күн бұрын

  Good idea of adding rudders. You'll get a lot more yaw control...

• 
  @tinkerzlab18 күн бұрын

  Thanks! After the 1st Test Flight I need a bit more movement on the Rudders to perform Stall Turns but it looks like they're going to work a charm ;-)

• 
  @mcemtpockets177519 күн бұрын

  12:36 good deal😂

• 
  @tinkerzlab19 күн бұрын

  Yeah, I'm lucky I was able to find it ;-)

• 
  @mcemtpockets177519 күн бұрын

  11:11 no stablizer

• 
  @tinkerzlab19 күн бұрын

  Yes, it took me a while to realize that. It shed that part like a Boeing Airliner ;-)

• 
  @TakeItToTheGround20 күн бұрын

  I have a skyhunter racing on a 2006 2400KV with a 6x4.5 prop. I fly it on a tattu 850 mah 4S. It's my fastest plane by a long way. My EDF's can't keep up.

• 
  @tinkerzlab20 күн бұрын

  Awesome Plane!

• 
  @smesui179921 күн бұрын

  Wow, all that space you have there.Looks like Colorado ? I started in RC, in terriorty like this but now no more.

• 
  @tinkerzlab21 күн бұрын

  Very close! Northern New Mexico.

• 
  @commanderveecock398522 күн бұрын

  Hi, You mentioned that you had changed out the linkage to allow for better loops and were going to do the same to the elevators. As a relative newbie, what does that mean and if it means swapping out parts, what sort and how easy is that to do? I’m on the verge of getting one of these, based on your review but also wondered if it has the capacity to do more than rolls and loops once I get confident with it. Can it do inverted flight? You’ve really sold it to me!

• 
  @tinkerzlab22 күн бұрын

  Thank You! Yes, changing the linkage to get more movement on the control surfaces. You don't need anything additional as it's just an adjustment. Once I get it flying exactly as I want I'll publish My Setup for this plane. I should be able to perform most maneuvers and I think it should do inverted just fine. What an awesome little beginner plane! I hope you can get one.

• 
  @commanderveecock398521 күн бұрын

  Just ordered one! Surprisingly cheap in the UK, which is unusual. £67 ($81). Looking forward to your setup guide and always enjoy your enthusiasm for this hobby as well as your skill.

• 
  @tinkerzlab20 күн бұрын

  @@commanderveecock3985 Thank You! It's definitely a steal at the price you paid ;-)

• 
  @christianjonatasgrosch951823 күн бұрын

  👏🏻👏🏻👏🏻🚀

• 
  @tinkerzlab23 күн бұрын

  ;-)

• 
  @Radiolink_official25 күн бұрын

  Nice flight video!

• 
  @tinkerzlab24 күн бұрын

  Thank You! It's a great plane and I can't stop flying it ;-) I hope Radiolink comes out with another plane soon.

• 
  @Radiolink_official24 күн бұрын

  @@tinkerzlab Thank you for your support!

• 
  @gerardmazz25 күн бұрын

  I have a question what channel is the stabilizer on is it channel 5 or 6

• 
  @tinkerzlab25 күн бұрын

  CH5

• 
  @gerardmazz25 күн бұрын

  @@tinkerzlab thank you for the info

• 
  @tinkerzlab25 күн бұрын

  @@gerardmazz You are most welcome. See you in the Air!

• 
  @tinkerzlab25 күн бұрын

  The Motor wasn't even warm after this flight. I have no doubt you could also fly the A560 3D Plane on 3S with a smaller prop but that plane already accelerates vertically on just 2S ;-)

• 
  @DanielSingerX26 күн бұрын

  I have this one and the flying fish and they are my most favourite!! I just today flew this one with the same byme a gyro and new bec with 5v bec and it flys so much better 🎉 thank you for these videos! U inspired me to get this one and I certainly don’t regret it

• 
  @tinkerzlab25 күн бұрын

  Thank You! Fantastic flying plane as well as the Flying Fish. A couple of my favorites as well. That Byme Gyro makes a great plane even better. See you in the Air!

• 
  @robertnastasi473827 күн бұрын

  great flying, great wing. I am not a fan of BetaFPV at all, but that motor seems fine

• 
  @tinkerzlab26 күн бұрын

  Thank You!

• 
  @user-kr6go1gq4y29 күн бұрын

  Electronically you said a mouth full, great plane

• 
  @tinkerzlab29 күн бұрын

  Thanks! Information overload ;-) One of my favorite factory airframes.

• 
  @GrumpyRCPilotАй бұрын

  I can't find the link to the pdf version of your setup for the D460. There are a lot of links below your video but none seem to be to a pdf. Thanks in advance

• 
  @tinkerzlabАй бұрын

  Good Catch! I don't know how I missed that ;-) I have added the link in the Show Notes. Setup File - RadioLink D460 Turbot: drive.google.com/file/d/19BePvSSbj6OzUC9kQA74KWGmcvKbiquK/view?usp=drive_link

• 
  @GrumpyRCPilotАй бұрын

  Thank you

• 
  @tinkerzlabАй бұрын

  @@GrumpyRCPilot You are most welcome ;-)

• 
  @gerardmazzАй бұрын

  Can this be bound to a radiomaster tx16s mark2

• 
  @tinkerzlabАй бұрын

  I have the original TX16S with the 4in1 Module and I can bind to it so I assume the Mark 2 can as well. Protocol V761 / 4CH

• 
  @gerardmazzАй бұрын

  @@tinkerzlab thanks

• 
  @gerardmazzАй бұрын

  @@tinkerzlab are you going to fly this with the radiomaster tx16s?

• 
  @hans-hermanngehring5704Ай бұрын

  Hallo , there is no need of an extra receiver to bind the TX16s to that plane , The build in receiver uses the Protocol " FX 9630 " what is included in the Multi-Module Firmware 1.3.4.0 , works fine for me . Best HHG

• 
  @tinkerzlabАй бұрын

  Thanks for that info. I discovered that protocol later on as no one seemed to know what protocol it used when it was 1st released. It's nice to have the option to add an external RX in case you don't have a Multi-Protocol TX. I wish they all had that option.

• 
  @lasersbeeАй бұрын

  I have the 2ch version... Would have liked to see a closeup of the Main Board while it was out.

• 
  @tinkerzlabАй бұрын

  How did you like the 2CH version?

• 
  @lasersbeeАй бұрын

  @@tinkerzlab It flies OK but it really needs the Elevator...

• 
  @ronaldderondeАй бұрын

  After few hard crashes,mine is now very hard to fly,btw has the same giro as my Iphone. Think that the MEms is sometimes out of order. I clicked all your links,but the Volantex warbirds which are bekomming very popular in Europe I donnot see. Regeslation is that only parkflyers Max 250gr,no cams,may fly here without warrant/papers. Planes/drones small and big have allot of restrictions and you need papierwerk and registration. So up with the parkflyers/warbirds. Compliment for your interresting YT RC plane reviews. We donnot have the space and beautifull blue sky here in the Netherlands,love the scenery. Any snakes there;)

• 
  @tinkerzlabАй бұрын

  Hi Ronald and Thank You! Yes, we have similar restrictions here in the USA. We do have Rattlesnakes here and where I fly so you have to keep watch and be careful where you step ;-) Here is a list and links of all my best flying Sub-250g Planes and I'll try to find some links to some of those Micro Warbirds. Best Sub-250g Factory Planes - My Picks Radiolink D460 Turbot Brushless Sub-250g Gyro Beginner Plane RTF amzn.to/452eYMf s.click.aliexpress.com/e/_DCwNuof Volantex Ranger 600 4CH Gyro Beginner Plane RTF usa.banggood.com/custlink/DKG8KEaf1E RadioLink A560 580mm Gyro Beginner 3D-Sport Plane PNF/RTF amzn.to/3EGM8Vl s.click.aliexpress.com/e/_DmHBJZn s.click.aliexpress.com/e/_DdBXFPD Radiolink SU27 Jet 3CH 400mm Gyro Beginner Parkjet RTF amzn.to/48gvM2q s.click.aliexpress.com/e/_DEEGJvx Flybear FX9706 SBACH 342 550mm Gyro Beginner Sport Plane BNF/RTF www.banggood.com/custlink/GKKVl0hMU8 Volantex Sport Cub 500mm 4CH Gyro Beginner Airplane RTF www.banggood.com/custlink/KvGF0cQ4tM RTF: amzn.to/3Sjlaun PNF: amzn.to/3vBQcEZ Eachine / AtomRC Flying Fish W650 650mm Twin Motor PNF www.banggood.com/custlink/K3350TARCI XK A280 P51D Mustang 560mm Gyro 3D/6G 4CH RTF www.banggood.com/custlink/mmKPGbMTef amzn.to/3tKIl7D amzn.to/3oDydu8 s.click.aliexpress.com/e/_DexPyDf s.click.aliexpress.com/e/_Dd8vhdr Arrows Pioneer 620mm 4CH Gyro Beginner Airplane RTF www.hobbyzone.com/products/pioneer-620mm-rtf What Vendors are you able to buy products from? Amazon, Banggood, AliExpress?

• 
  @ronaldderondeАй бұрын

  For me AE,free fast shipping,prox 8 days planes. Parts 5/6 weeks. Bangood use not. Amazon sometimes. Greetings from the Netherlands. I fly at Rotterdam-Nesselande the grassfield by the water,you can see on earth Google.

• 
  @ronaldderondeАй бұрын

  Flew this morning again the KF605,after throw directly nose in the ground or after 3/4 seconds flight nose down. 30 launches,battery changed,of and on but and again binding. Nose broke off,pff. Very strange flying and suddenly compleet out off control. Than I had an Eureka moment because the errors in the air looked like the stunt mode. I bind again and with no gasthrottle I keep the sticks to the left,red led starts blinking then solid. Then right stick up,red led blinking then solid. After this KF flyes as a dream again. I never touched the stunt button,so probebly there is sometimes a conflict in the electronics(hard crashes)which influates the circuit. Maybe this is of help for other users of this type of circuit boards in RC planes.✈️

• 
  @tinkerzlabАй бұрын

  @@ronaldderonde That's fast delivery compared to mine ;-)

• 
  @tinkerzlabАй бұрын

  @@ronaldderonde Absolutely! I assumed mine was going to need re-calibrating after crashing into the truck ;-)

• 
  @NoLogic69Ай бұрын

  How does this compare to the Pioneer?

• 
  @tinkerzlabАй бұрын

  It's a good flying plane but I think the Pioneer is better.

• 
  @BeefSupreme-vk9szАй бұрын

  The fun never started, seems there's a motherboard problem on these, right out of the box my rudder and elevator work in slow motion and don't center by themselves, left wing is warped badly , battery cover doesn't click on one side , box was retaped 3 times probably a return, worst plane I ever bought ,demanding a new one hoping they tell me to keep old one and I'll buy new guts, I waited a month, if they want old one back I'm forgetting to return the battery ,nose cone and the 2 special size props,

• 
  @tinkerzlabАй бұрын

  I get a lot of shipping damage these days.

• 
  @BeefSupreme-vk9szАй бұрын

  @@tinkerzlab no shipping damage faulty controllers kzread.info/dash/bejne/a5mDt9WaZJa_hpc.htmlfeature=shared

• 
  @johnnydeville1551Ай бұрын

  I don't like gimp, I LOVE gimp!!!😊

• 
  @tinkerzlabАй бұрын

  I'm in your camp ;-)

• 
  @InspireNow555Ай бұрын

  Awesome tutorial 👌 👍

• 
  @tinkerzlabАй бұрын

  Thank You!

• 
  @rcrotorfreakАй бұрын

  Wow nice flying. BTW what protocol does it use? Or did you put in you're own rx? Ty :)

• 
  @tinkerzlabАй бұрын

  Thanks! I used the Stock Radiolink RX. For Multi-Protocol it's Radiolink / Air I just completed some 3S Flights with it. Fantastic ;-)

• 
  @lasersbeeАй бұрын

  Nice Landing... Would like to see your TX16S setup after it is fully tuned. They say it has a 31 minute flight time with the 800mAh cell they provide.

• 
  @tinkerzlabАй бұрын

  Thanks! Yes, looking at the flight time I'm getting, pushing it fairly hard, I bet you could get close to 30 minutes just cruising around. Weather permitting, I'm going to be testing it on 3S today ;-) See you in the Air!

• 
  @rhysespeaceАй бұрын

  I'm impressed enough to consider purchasing a few of those boards. Any chance you're willing to share the protocol used on your radio?

• 
  @madmac5709Ай бұрын

  watch his previous video, he explains it all !

• 
  @tinkerzlabАй бұрын

  I attached an external radiolink r8fm receiver and used protocol radiolink / air on my tx16s. Worked a charm ;-)

• 
  @tinkerzlabАй бұрын

  The Stated CG is incorrect! See where the Plane balances Neutral with the Stock LIPO and move the CG forward 4mm. That's where I have my CG. The Setup PDFs are updated.

• 
  @TriumphRiderR3Ай бұрын

  I don't understand your CG settings. The wing is only 81mm front to back, so how can the CG be at 88mm?

• 
  @tinkerzlabАй бұрын

  I gifted this plane so I don't have it or the manual available.. I should have stated to measure the CG from the Foam at the Nose not Wing. I'm guessing if you measure back from the foam part of the nose 88mm you'll end up 20% back from the leading edge of the Wing. Or to simplify it, see where the plane balances neutral with the stock LIPO and move the CG 4mm forward. Good catch! I'll post a correction and update the PDF Files.

• 
  @tinkerzlabАй бұрын

  ONLY $112 using the Link and Coupon Code Below: Exclusive Ground Control RC Link: ban.ggood.vip/14UWZ Exclusive Ground Control RC Coupon Code: BG3189bc

• 
  @bpchannel3900Ай бұрын

  Do you have a flying clip?

• 
  @tinkerzlabАй бұрын

  Coming soon.