i have 100℅ lightly insulated Mtb glove & since touted their goggles i'll start there...thanx again
@user-oq7rc3sk7z10 ай бұрын
you have to torque the bar screws ! liek you did with a clamp, thats not the right way !
@bushpuss Жыл бұрын
Great review! I’m going with the 100%!
@dcraddockmc2 жыл бұрын
Thank you for making this great video! Can you please tell me if this procedure will be the same for the 1250 GS? I think these are just what my wife needs.
@damytzeus2 жыл бұрын
solid
@marcnunes69162 жыл бұрын
You have the 15 degree version?
@qwwesaz3 жыл бұрын
Большое спасибо!!!
@lives2sailaway3 жыл бұрын
Great video, thank you! Which Flexx Handlebar model and size did you buy?
@sgtunix3 жыл бұрын
What sweep did you go for? I also have a R1200GS (LC).
@vsguy973223 жыл бұрын
How would I install these on my 2007 GS with internal routing for the heated grips?
@lcjjr.67144 жыл бұрын
Does the 100% goggles provide 100% UV protection?
@david81854 жыл бұрын
nice instructions. Thinking of this upgrade
@grimezgetem4 жыл бұрын
I have a LUMOS Matrix helmet which is a half helmet for my e scooter. What OTG would you recommend to avoid blocking the LED screen on the back of the helmet?
@Braapncamp4 жыл бұрын
Thanks for this video mate! I run 100% today and this convinced me to stay with them for OTG. Happy trails!
@pujabelgian4 жыл бұрын
Biggest OTG that fits a moto 3.. which model would you recommend?
@rdkuless4 жыл бұрын
you didn't mention any of the Smith Optics OTG goggles, ie: Knowledge, Prophecy, etc... they have a chromapop lens for seeing depth and clarity.
@ADVRaiderKTM4 жыл бұрын
Any issues with heated grips?
@kellygoertzen8494 жыл бұрын
thanks for the follow up vid.
@johndillon82605 жыл бұрын
I wear glasses and no helmet these googles wont help. any suggestions
@EnvoyofDawn4 жыл бұрын
Wear a helmet?
@jodywaltemeyer53056 жыл бұрын
Thank you so much for this excellent instructional video. I have had wrist problems ever since I bought my 2013 LC GS. I knew there was a vibration in the bars, but all BMW people told me they had never heard that before. Then my right shoulder started to have severe pain. It got to the point where I was ready to give up riding. I am getting treatments for my shoulder, but so far, have not decided to go the route of hand surgery. I feel like I should give these bars a try. Right now I have Rox 2" adjustable risers on my bike because I have always felt that I needed them pulled back (I am female and have long arms, but not as long as yours). I am concerned that if I don't have as much pull back, as with the risers,that I will create an issue in my body somewhere else. I want my wrists in a completely neutral position. I know I should call Cole, but do you have any insights?
@31acruz5 жыл бұрын
You can save yourself a life time of pain and trouble in 3 short weeks. Strengthen your shoulders and finger forearm extensors, its very simple: Front military press with light weight (not so light that you feel nothing, not so heavy that you strain, if you get to 8-10 repetitions per set (3 sets total) and find that you don't feel like going past 8-10 you have the right weight, it should feel good, good resistance not painful. Do it tuesday and thursday will take you probably 15 minutes tops maybe 10 minutes. Do the military presses on a machine, my favorite, or with a cheap 5 lbs dumbbell, once strong no more then 10 lbs, that's plenty. Dumbbell wrist flexions for the forearms, 5 lbs, increase to no more then 10 lbs over time. It will change your life. You will be sore the first week, stop until all the lactic acid stops hurting, then resume the regimen, it will not hurt anymore after the first work out.
@surfinsillybilly6 жыл бұрын
Great review, picked up a pair of 100%..Thanks!
@LookattheBiggerPic6 жыл бұрын
...really good to see someone trying these bars out on a R1200GS - I've the same problem with wrist & elbow issue with long off road rides standing on my R1200GS, will add this to my "Must Get List"... Would have enjoyed seeing a riding sequence and review comparing old & new - if you feel so inspired!
@d1fballplayer7 жыл бұрын
dang it! i was really hoping you would show different glasses that would fit in them! otherwise good review
@pfdfiremedic32527 жыл бұрын
Informative Review. The 100% Goggles are the best.
@alittlebitofthisthat73527 жыл бұрын
what size drill bit is used??
@HULKSASH7 жыл бұрын
Very interested in these bars... Why don't you guys drill the hole before shipping it out? It would be easy for us to install and not worry about screwing it up.
@PhiTonics7 жыл бұрын
Thank you for doing this, I agree its ridiculous that were all relegated to four choices.
Пікірлер
i have 100℅ lightly insulated Mtb glove & since touted their goggles i'll start there...thanx again
you have to torque the bar screws ! liek you did with a clamp, thats not the right way !
Great review! I’m going with the 100%!
Thank you for making this great video! Can you please tell me if this procedure will be the same for the 1250 GS? I think these are just what my wife needs.
solid
You have the 15 degree version?
Большое спасибо!!!
Great video, thank you! Which Flexx Handlebar model and size did you buy?
What sweep did you go for? I also have a R1200GS (LC).
How would I install these on my 2007 GS with internal routing for the heated grips?
Does the 100% goggles provide 100% UV protection?
nice instructions. Thinking of this upgrade
I have a LUMOS Matrix helmet which is a half helmet for my e scooter. What OTG would you recommend to avoid blocking the LED screen on the back of the helmet?
Thanks for this video mate! I run 100% today and this convinced me to stay with them for OTG. Happy trails!
Biggest OTG that fits a moto 3.. which model would you recommend?
you didn't mention any of the Smith Optics OTG goggles, ie: Knowledge, Prophecy, etc... they have a chromapop lens for seeing depth and clarity.
Any issues with heated grips?
thanks for the follow up vid.
I wear glasses and no helmet these googles wont help. any suggestions
Wear a helmet?
Thank you so much for this excellent instructional video. I have had wrist problems ever since I bought my 2013 LC GS. I knew there was a vibration in the bars, but all BMW people told me they had never heard that before. Then my right shoulder started to have severe pain. It got to the point where I was ready to give up riding. I am getting treatments for my shoulder, but so far, have not decided to go the route of hand surgery. I feel like I should give these bars a try. Right now I have Rox 2" adjustable risers on my bike because I have always felt that I needed them pulled back (I am female and have long arms, but not as long as yours). I am concerned that if I don't have as much pull back, as with the risers,that I will create an issue in my body somewhere else. I want my wrists in a completely neutral position. I know I should call Cole, but do you have any insights?
You can save yourself a life time of pain and trouble in 3 short weeks. Strengthen your shoulders and finger forearm extensors, its very simple: Front military press with light weight (not so light that you feel nothing, not so heavy that you strain, if you get to 8-10 repetitions per set (3 sets total) and find that you don't feel like going past 8-10 you have the right weight, it should feel good, good resistance not painful. Do it tuesday and thursday will take you probably 15 minutes tops maybe 10 minutes. Do the military presses on a machine, my favorite, or with a cheap 5 lbs dumbbell, once strong no more then 10 lbs, that's plenty. Dumbbell wrist flexions for the forearms, 5 lbs, increase to no more then 10 lbs over time. It will change your life. You will be sore the first week, stop until all the lactic acid stops hurting, then resume the regimen, it will not hurt anymore after the first work out.
Great review, picked up a pair of 100%..Thanks!
...really good to see someone trying these bars out on a R1200GS - I've the same problem with wrist & elbow issue with long off road rides standing on my R1200GS, will add this to my "Must Get List"... Would have enjoyed seeing a riding sequence and review comparing old & new - if you feel so inspired!
dang it! i was really hoping you would show different glasses that would fit in them! otherwise good review
Informative Review. The 100% Goggles are the best.
what size drill bit is used??
Very interested in these bars... Why don't you guys drill the hole before shipping it out? It would be easy for us to install and not worry about screwing it up.
Thank you for doing this, I agree its ridiculous that were all relegated to four choices.