Self employed Oxfordshire based electrician and Art of Smart Approved Partner. NICEIC Approved Contractor. Aurora Approved Installer. Nest Pro Installer. HikVision Approved Installer HCSA.
There would be consequences if you broke into anyones home it is illegal..
@danvictor39343 ай бұрын
Hi to be fair to Garo in the BS 7671 Regulations boo you will find absolutely nothing about ferrules.
@whatthedeuse4 ай бұрын
I ended up removing the load through flap on my custom with the bott racking just have to drill out the rivets on the hinge 😂. Just bought a L2 custom will be ordering new bott stuff this week 👌 I always put a double full false floor in the van. Bottom one houses a set of 5 tread werners and a set of a Zarges 3 ways the second shallower one about 75mm allows you to still use the full load through 🤟
@tombickerton59095 ай бұрын
Shame you didn’t follow suit with galvanised steel conduit . But I guess it comes down to price
@gd-bq7em5 ай бұрын
What surge is that black one mate, is it new fuse box or something else
@GiffordsElectrical5 ай бұрын
That’s correct, It’s fusebox type 1 & 2 SPD
@dansparkyintraining6 ай бұрын
Arrr I can’t believe how fat i am I need too be photo shopped in all future footage 😂 that’s in I’m on a diet 😊
@GiffordsElectrical5 ай бұрын
Sorry Dan they do say the camera adds 10lbs. Definitely only had one camera that day though 😮🤣
@frimleyfrodo6 ай бұрын
As an apprentice I can recall doing one church tower in Pyro (that makes me old) with Coughtrie bulkheads around the stairwell and then another tower in SWA.
@HeathenGeek6 ай бұрын
When you do an EICR in a church, should you put down God as the occupier?
@GiffordsElectrical5 ай бұрын
Technically 🤣
@paulf25296 ай бұрын
Easier and cheaper to build in ply and source your own systainers.
@GiffordsElectrical5 ай бұрын
Each to their own I guess. I think ply looks shit and you know you’re gonna get splinters with it over time. It’s also not crash tested unlike the Bott racking.
@JIBS.6 ай бұрын
Waste of money. Would never use bott racking again
@GiffordsElectrical6 ай бұрын
Thanks for the comment. For you it was a waste of money. For me it’s worth every penny.
@MK-em4nk6 ай бұрын
Good to see you back.
@martinburgess23226 ай бұрын
Good to see Craig.😃👍hope all is well.
@keithquestedelectrical97856 ай бұрын
Bott racking the best
@GiffordsElectrical6 ай бұрын
I love it.
@Rhizzo7 ай бұрын
That’s crazy
@bonaminhrasmey428 ай бұрын
❤where do you get the power from 😊
@GiffordsElectrical5 ай бұрын
Power was taken from a socket inside the house . I fitted a 13a fused connection unit and then connected it up from there.
@chas39978 ай бұрын
spend some decent money on a retaining box as well to keep plants off growing over your vital ground connection
@chas39978 ай бұрын
Earth disk might have been better buried slightly shallower and reading below 20 ohms better than your outcome.
@stevep92219 ай бұрын
There is no way any electricity would earth through this rod. The gas pipe and water copper pipe will be bounded to the earth and the chances of any short or lightning strike would getting to this rod is zero. Not a chance. Dirt is not a good condicter but the miles of water in the copper pipe is. You better look at the bonding as that is a worry.
@mb-electricalservices9 ай бұрын
Nice job mate. Congrats on winning the work! 👌
@anthonygaunt897410 ай бұрын
You may have done the electrics ok but the plumbing needs a water booster fitting
@boguslaw161510 ай бұрын
Hi, My electric shower triton enrich 10.5kw requires 45amp fuse and my question is what is right cable size I need to use ?
@Davidhughes946711 ай бұрын
The extra core should be sleeved and connected with earth
@Mark-wx1ho Жыл бұрын
I was quoted £1200 to fit one of these straight off my meter box. The guy said I needed a Type A RCBO in an IP66 enclosure, but this unit has an RCBO built in. Do I need two RCBOs? Thanks.
@xbullshet Жыл бұрын
Yes. LED will last 40'000 but not electronics that drive it 🙂
@UKBusEnthusiast298 Жыл бұрын
Texecom Really Helped Me Find My Comfort At Home!
@ryanmilne1987 Жыл бұрын
Yeah I bet you will be back with the earth box 😂
@alastairhumphries46 Жыл бұрын
First watch of your channel great stuff.Tenents🙄
@frimleyfrodo Жыл бұрын
Really enjoyed that. Something a bit different- thanks.
@laks05 Жыл бұрын
Nice clean job!
@stephenhill6479 Жыл бұрын
Nice job well done
@HeathenGeek Жыл бұрын
Yay! You're back Some yt blokes get editors to deal with the annoying stuff. Hope you make more of them 😁
@CORRIGEEN71 Жыл бұрын
How does this work so who ever gets to the shower first ?
@GiffordsElectrical Жыл бұрын
This is a non-priority unit, all three showers connect to it and it works on a first come first served basis all done by contactors
@newlinerealboi3434 Жыл бұрын
Where’s Gifford gone?
@billsbasementworkshop1902 Жыл бұрын
Crap audio, ruined what is otherwise a great video.
@davidwaine32 Жыл бұрын
Can I ask a question please buddy… I’ve built a spray booth at home with a 20” explosion proof fan, I’m just connecting in to an extension lead, simply plugged in as it came with a plug pre-wired.. The fan it’s self has an earth screw connection… My question - would it be OTT installing an earth rod like this just for the fan or is there no need? Or is there an easier way? I’m not an electrician obviously! Thank you for any response at all!
@PanagiotisAnagnostopoulos Жыл бұрын
Hello, any idea if you can use it with a vacuum other than dewalts? Because I see it fits to dewalt vacuum, but does it fit to a bosch?
@waqasbtm1 Жыл бұрын
Nice video
@michealplater9007 Жыл бұрын
They made the same mistake in Australia with sealing the fuse. Have changed to only the base is sealed and you can remove the fuse.
@ef7480 Жыл бұрын
Could you have also come down the wall and fed the socket in the shed from underneath if the customer didn't want the SWA cable suspended?
@persona250 Жыл бұрын
The charger has its own rcd . The cable feeding is run in surface trunking , why fit an rcbo in the fuseboard ?
@Swa33er Жыл бұрын
Nice installation but couldn't you have used clear silicone to seal it instead of white 😰
@tombailey6342 Жыл бұрын
Obviously....
@markrowlands4086 Жыл бұрын
If you are in the market for a wall chaser you will find this video the most helpful of all I have watched, well done covering the important issues of what we expect from our expensive tools.
@offbeatwarble Жыл бұрын
Can you connect wintex through smart on locally on WiFi or do you have to have the panel on texecom cloud account?
@ef7480 Жыл бұрын
Like it!! What make are those yellow cutters under the CK cutters at 11:50?
@zippydoodah15472 жыл бұрын
It's advised to go no more than 600mm up to external wall... Footings.
@TheHatchetbob2 жыл бұрын
Great video Thanks my man
@BeerIdeas2 жыл бұрын
I’m looking to get solar, battery storage, ev car chargers, have I have a couple of sheds/ garages. my earthing looks like a TNCS or TNS arrangement… it seems far safer get my own TT earthing set up in place and not use the DNO’s. Any reason why I couldn’t/wouldn’t want to change?
@hermanmelville20292 жыл бұрын
Good video but why the fuss about connected CPCs? Its not specified in 7671 is it ?
@chrisclose77932 жыл бұрын
when me and my wife get a place of our own im planning to install my own cctv system someone recommended hikvision colorvu for covering front door and hallway ,bosch mic550s for covering garden and drive with hikvision nvr and keyboard controller , great video
Пікірлер
There would be consequences if you broke into anyones home it is illegal..
Hi to be fair to Garo in the BS 7671 Regulations boo you will find absolutely nothing about ferrules.
I ended up removing the load through flap on my custom with the bott racking just have to drill out the rivets on the hinge 😂. Just bought a L2 custom will be ordering new bott stuff this week 👌 I always put a double full false floor in the van. Bottom one houses a set of 5 tread werners and a set of a Zarges 3 ways the second shallower one about 75mm allows you to still use the full load through 🤟
Shame you didn’t follow suit with galvanised steel conduit . But I guess it comes down to price
What surge is that black one mate, is it new fuse box or something else
That’s correct, It’s fusebox type 1 & 2 SPD
Arrr I can’t believe how fat i am I need too be photo shopped in all future footage 😂 that’s in I’m on a diet 😊
Sorry Dan they do say the camera adds 10lbs. Definitely only had one camera that day though 😮🤣
As an apprentice I can recall doing one church tower in Pyro (that makes me old) with Coughtrie bulkheads around the stairwell and then another tower in SWA.
When you do an EICR in a church, should you put down God as the occupier?
Technically 🤣
Easier and cheaper to build in ply and source your own systainers.
Each to their own I guess. I think ply looks shit and you know you’re gonna get splinters with it over time. It’s also not crash tested unlike the Bott racking.
Waste of money. Would never use bott racking again
Thanks for the comment. For you it was a waste of money. For me it’s worth every penny.
Good to see you back.
Good to see Craig.😃👍hope all is well.
Bott racking the best
I love it.
That’s crazy
❤where do you get the power from 😊
Power was taken from a socket inside the house . I fitted a 13a fused connection unit and then connected it up from there.
spend some decent money on a retaining box as well to keep plants off growing over your vital ground connection
Earth disk might have been better buried slightly shallower and reading below 20 ohms better than your outcome.
There is no way any electricity would earth through this rod. The gas pipe and water copper pipe will be bounded to the earth and the chances of any short or lightning strike would getting to this rod is zero. Not a chance. Dirt is not a good condicter but the miles of water in the copper pipe is. You better look at the bonding as that is a worry.
Nice job mate. Congrats on winning the work! 👌
You may have done the electrics ok but the plumbing needs a water booster fitting
Hi, My electric shower triton enrich 10.5kw requires 45amp fuse and my question is what is right cable size I need to use ?
The extra core should be sleeved and connected with earth
I was quoted £1200 to fit one of these straight off my meter box. The guy said I needed a Type A RCBO in an IP66 enclosure, but this unit has an RCBO built in. Do I need two RCBOs? Thanks.
Yes. LED will last 40'000 but not electronics that drive it 🙂
Texecom Really Helped Me Find My Comfort At Home!
Yeah I bet you will be back with the earth box 😂
First watch of your channel great stuff.Tenents🙄
Really enjoyed that. Something a bit different- thanks.
Nice clean job!
Nice job well done
Yay! You're back Some yt blokes get editors to deal with the annoying stuff. Hope you make more of them 😁
How does this work so who ever gets to the shower first ?
This is a non-priority unit, all three showers connect to it and it works on a first come first served basis all done by contactors
Where’s Gifford gone?
Crap audio, ruined what is otherwise a great video.
Can I ask a question please buddy… I’ve built a spray booth at home with a 20” explosion proof fan, I’m just connecting in to an extension lead, simply plugged in as it came with a plug pre-wired.. The fan it’s self has an earth screw connection… My question - would it be OTT installing an earth rod like this just for the fan or is there no need? Or is there an easier way? I’m not an electrician obviously! Thank you for any response at all!
Hello, any idea if you can use it with a vacuum other than dewalts? Because I see it fits to dewalt vacuum, but does it fit to a bosch?
Nice video
They made the same mistake in Australia with sealing the fuse. Have changed to only the base is sealed and you can remove the fuse.
Could you have also come down the wall and fed the socket in the shed from underneath if the customer didn't want the SWA cable suspended?
The charger has its own rcd . The cable feeding is run in surface trunking , why fit an rcbo in the fuseboard ?
Nice installation but couldn't you have used clear silicone to seal it instead of white 😰
Obviously....
If you are in the market for a wall chaser you will find this video the most helpful of all I have watched, well done covering the important issues of what we expect from our expensive tools.
Can you connect wintex through smart on locally on WiFi or do you have to have the panel on texecom cloud account?
Like it!! What make are those yellow cutters under the CK cutters at 11:50?
It's advised to go no more than 600mm up to external wall... Footings.
Great video Thanks my man
I’m looking to get solar, battery storage, ev car chargers, have I have a couple of sheds/ garages. my earthing looks like a TNCS or TNS arrangement… it seems far safer get my own TT earthing set up in place and not use the DNO’s. Any reason why I couldn’t/wouldn’t want to change?
Good video but why the fuss about connected CPCs? Its not specified in 7671 is it ?
when me and my wife get a place of our own im planning to install my own cctv system someone recommended hikvision colorvu for covering front door and hallway ,bosch mic550s for covering garden and drive with hikvision nvr and keyboard controller , great video