If at all possible, please upload the kids oriented version with the talking parrot, that is the version i had and it brings back so much nostalgia
@BaronEvola123Ай бұрын
America makes nothing anymore.
@Sacapuntas69Ай бұрын
I like how they say the hats make sure not one stray hair gets on the body, but all her hair is hanging out, 32:54
@TrevorBrassАй бұрын
I had this on VHS as a kid. Watched it many times! Salute to the UAW American men and women making these vehicles. I'm guessing this was filmed mid-late 1990s? (As this is the 4th gen Mustang being made here.)
@tomsheets6399Ай бұрын
I thoroughly enjoyed this video
@BlackyBrownDestruction93372 ай бұрын
I was too young to save enough money to buy one 😢
@rickmassey12722 ай бұрын
My 29435 mileage, never driven in snow and rarely in rain,...2016 S550 Mustang GT has corrosion on the edge of the hood. Ford promised to help when I called ,but they only had me do a online survey and THEY HAVE DONE NOTHING ELSE...so yeah paint quality at Ford isn't
@toddbob552 ай бұрын
Ford builds excellent vehicles !!!
@winegeek29492 ай бұрын
Well done
@willbill8083 ай бұрын
I still whistle the music from this.
@LegoRx73 ай бұрын
I own a 2002 F-150 4.6l, September '01 Romeo Engine Plant. I find this very interesting.
@ms.annthrope4153 ай бұрын
I bought a 1990 Mustang 5.0, 5 speed hatchback. The hatch never closed correctly. Something was rolling around blocking the locking latch. The engine races and takes a heck of a time to shift correctly as it races up the rpm as soon as I hit the clutch and disconnect the engine from the tranny. Took it to the dealer several times but to no avail. One time every electrical circuit died. Just died. Waited about 5 minutes and it fired back up. The headlight housing cracked, and I had to use duct tape to hold the light bulb in place. The car was barely tolerable. Certainly lived up to its nickname Found on Roadside Dead. Then having STOOPID tattooed on my forehead i bought a 2017 Ford F250 6.7 diesel in 2018. That actually was the best vehicle I've owned. Was absolutely fautless for the first 41,000 miles. Then a few things needed fixing, but the engine and tranny have been totally reliable. I'm now at 111,000 miles and looking forward to many good miles ahead. Im 63 years old so this maybe the last vehicle i own. So Ford has cracked down on QC and improved their production line. I think all three manufacturers have improved but they wouldn't have done so without the Japanese eating their lunch and taking away their market share.
@Cokie9072 ай бұрын
I bought an 86 GT 5.O brand new and had the opposite experience. The car was a joy to own and I put over 325,000 miles on her. During the course of 25 years there was only one time I could not get the engine to start. I was on a ski trip and it was super cold in VT, say -20F. The car had to be towed to a garage and thawed out. The mechanic said the injectors had "iced over" but I think it was a case of icing in the fuel line. Whatever, one time in 25 years ain't too shabby a track record!!
@monikhushalpuri21 күн бұрын
To be fair, the 79-93 fox platform cars had crap electrical from the factory, it was hit or miss...the 94 and up was greatly improved in both structural rigidity and electrical. I had my 1994 gt which I bought in 2016 and got rid of in 2020 (regrettably) and put over 100,000 miles on it (I drive a lot) never had a major issue, I just replaced original parts when they went bad like the ect sensor, original radiator, original fuel pump, and original rear control arms, and original starter. I owned a 1988 tbird turbocoupe which is basically just a lengthened fox body mustang and it was a great car apart from the crap electric system, if you ever get another 86-93 mustang then get the whole electrical system redone! Or just get a 1994 and up model and dont have to worry about electrical issues
@user-um1qs6fn8m4 ай бұрын
it's crazy to think those Mustangs were made in the same factory right next to each other. They were sent around the U.S. to dealerships and had different owners and almost 30 years later they either wrecked, modded, stock, abandoned, used as parts cars, or someones project car. wild to think
@richardtrudeau73635 ай бұрын
I worked in the DAP in the area where they put the Engine in.Completely different. We would drop the whole body over the Gas Tank Drive Shaft and Muffler with the front resting on Saddles.
@steveh82245 ай бұрын
Where is the steel from?
@chanraedouglas77685 ай бұрын
Karl Benz was actually the firsr car manufacturer to use the assembly line to build cars in the late 1800's.. Henry Ford improved on it...
@ms.annthrope4153 ай бұрын
Henry Ford didn't invent the assembly line. He did improve on it by having the workers stationary and moving the conveyor belt with the vehicle to the workers who assembled their part, and the vehicle went to another position. Ford also broke down the steps and assembly to the most basic skills so each worker can be dismissed and another take his place with a minimum of training. It was so successful that the rest of the world called it Ford-ism and copied Ford's techniques.
@alphonso1365 ай бұрын
they showed the tires being mounted and installed but they didn't them being spin balanced
@alphonso1365 ай бұрын
these cars were bland the Thunderbird/cougar were better looking cars
@joystickthegaminghusky5 ай бұрын
I hope my 98 mustang wasmade by the sweet black lady with the glasses
@joanstehlik2356 ай бұрын
I got to visit the Rouge when they were making Mustang lls in75' during a field
@jordanmay32878 ай бұрын
Holy shit, we used to have this on VHS when I was a kid. I watched it over and over and over. Drove my parents crazy. This is amazing, thank you
@JustRustingАй бұрын
I still have mine, very interesting, somewhere in the house, but a VHS machine that's another story.
@markprice222511 ай бұрын
At about 22:30 Kenny G🎷 really starts killing it on the Sax!! Definitely sets the mood
@markprice222511 ай бұрын
You have to admit, when they brought out basically the entire side of an SN95 Mustang Coupe, minus the doors oc, you were like WTF?? I know I was. After U see it, it makes sense tho
@markprice222511 ай бұрын
9 Miles of assembly line to complete a mustang gt in 1994, and all in a 1 Mile long factory 🏭 or assembly plant?? Had to watch this being I just bought a 95 GT Coupe, Love It!!!
@77PacerStudios11 ай бұрын
I STILL HAVE this videotape!!! I had it ever since I got it for Christmas in December 2000!
@B1FFCO2 ай бұрын
What a great present😂
@ctjfd Жыл бұрын
I like how there's also a kids version of this same video (and the same production company). But as a kid in the 90s I grew up watching (and rewatching) this version on VHS . The strong narration of Robert Jones and jazz music were a terrific treat of nostalgia.
@FloorItDuh6 ай бұрын
I remember watching this too. It was one of my favorites. As a child I found the whole thing fascinating. I attribute it to my life long passion for machines and something that led to my current career path. It filled me with so much pride. The kids one was the one with the parrot if I remember right. Watched it many times. Huge nostalgia hit stumbling across this.
@lessmigrantsmorewalls8392 Жыл бұрын
Hot chick on thumbnail
@neooverby3750 Жыл бұрын
I had this on tape when I was in preschool. I watch it over and over. One day we had the opportunity to bring our favorite movie to school. We didn’t watch mine because it wasn’t appropriate for kids my age….
@dave3uz74 Жыл бұрын
I had this on VHS as a kid and i just randomly thought of seeing if it was on youtube. 🥹
@Johnnycdrums Жыл бұрын
I'm always in awe of the engineering and tool making that goes into all the dies, jigs, and fixtures on the line. Just Imagine the tool rooms in that place. Ok, people, start over, new generation Mustang design coming from the drawings upstairs, and we want the line modernized for better efficiency, so lets get crackin'.
@mikeluscher159 Жыл бұрын
I remember watching the same video as a kid, but narrated by a talking parrot 🦜
@FloorItDuh6 ай бұрын
It's incredible despite two decades as of when I'm posting this comment I can still vividly remember exactly what you are talking about. Such a huge nostalgia hit.
@jejdigo Жыл бұрын
I work at the Wayne plant making the Bronco and Ranger. So much has changed and yet a lot hasn't either. Its awesome to see how things used to be done 30 years ago.
@donuthole7236 Жыл бұрын
I have an 04 Cobra dated 1/19/04 3 months before they closed down the Rouge River Plant ( or DAP) on April 1st. Mustangs were continually built there since 1964. The history of the Rogue River plant is amazing. Raw ore went in one end and finished product came out the other. Do a KZread search they are very fascinating.
@markprice222511 ай бұрын
I just got your DAP ref. Detroit Assembly Plant 🏭 This was cool af, I drive a 95 gt coupe! Spent more on the paint than I did on the🚘
@nickkostakis9600 Жыл бұрын
Great video but I like to see the carrent model in detail thank you very much
@281crane2 жыл бұрын
👍🏿# 212
@billystegall9602 жыл бұрын
Nice video!
@edwardfuller39522 жыл бұрын
Awesome video! 👍
@angelgjr19992 жыл бұрын
The hood is made of plastic? It feels heavy. Or is that the v6 model?
@angelgjr19992 жыл бұрын
I wonder how much this job pays
@williamwilkins30842 жыл бұрын
They live pretty good at it from what I've heard, thanks in large part to the UAW, whether that's good or bad.
@ImportDomestic20062 жыл бұрын
I’m not a Ford fan but it’s cool to see history in the making. That would’ve been cool when they were building the Pontiac GTO. If there was a film documenting their assembly as well.
@alexanderchapman55422 жыл бұрын
I gotta get me one of those...
@manunava17762 жыл бұрын
Man, videos like this need to be remastered and upscaled to UHD!!!
@PaulBoss3512 жыл бұрын
I went through River Rouge in early 1979 in the sixth grade. They were still building the Mustang II and hadn't switched over to the Fox body yet. We spent two days there & toured Greenfield Village and the Henry Ford Museum.
@gorgeusjames2 жыл бұрын
I loved my sn95 96 mustang gt I abused it it was a total beast and the 4.6 was so reliable sold it at over 250k miles cause I have two more mustangs and wanted a truck
@alb123456722 жыл бұрын
THose are great engines, also in tbird and crown vic. They live on today (very similar design) in the 6.2 truck motor.
@DavidJSmith-hl6kb2 жыл бұрын
I AM AN OLD SCHOOL FORD GUY, I GREW UP DURING THE 60'S AND 70'S MUSCLE CAR ERA!...MY FIRST MUSTANG WAS A 66 FORD MUSTANG COUPE WHILE IN HIGH SCHOOL AND I FIXED IT UP LIKE A 66 SHELBY GT350 COUPE! AFTER THAT I HAD A 69 MACH 1 MUSTANG WHICH WAS STOLEN!...LATER I OWNED A 85 MERCURY CAPRI RS 5.0L, A 2000 FORD EXPLORER, THEN A 2003 FORD MUSTANG GT/COBRA PROJECT CAR AND CURRENTLY I OWN A 2008 FORD MUSTANG COUPE V6! I AM IN MY 60'S NOW, BUT I AM LOOKING AT DOING A CONVERSION TO MY V6 MUSTANG TO A ELECTRIC POWER, I LIVE IN CALIFORNIA, USING A TESLA MODEL S P100D ELECTRIC MOTOR SWAP! BUT I AM ALSO LOOKING AT THE 2022 SHELBY AMERICAN BUILT SHELBY GT500 KR WIDEBODY WITH 900HP OR THE 2022 SALEEN 302 BLACK LABEL WITH 800HP!...I AM JUST SAYING!...GOD BLESS AMERICA! 😇 BTW!...I AM ALSO LOOKING AT THE 2022 TESLA MODEL X PLAID SUV!....I ALSO MAY WAIT FOR THE SHELBY MACH E GT SUV OR THE NEW HYBRID 2023/24 MUSTANG GT OR SHELBY VERSION!...I AM JUST SAYING!
@SiamThai192 жыл бұрын
what year ?
@gorgeusjames2 жыл бұрын
Seems 1994-1995
@faugrad2 жыл бұрын
1995 per date code at 32:34
@danielwebb93062 жыл бұрын
I love the mustang been a mustang fan ever since I seen the boss mustang back in school I'm a owner of a 2015 ford mustang gt premium an I'll neve sell it ..great video
@georgeharleydavidsonrider1563 жыл бұрын
I just bought a 1996 Mustang SVT Cobra Convertible. It was made at the Deerborn Michigan plant. I’m sure the same workers and this video put my car together. 21-K original miles . It looks drives and smells like a new car. I feel like I just hit the lottery driving my new Mustang.
@patrickmatias7462 жыл бұрын
I bet she’s fast
@lessmigrantsmorewalls8392 Жыл бұрын
How is that low km possible?!??
@markprice2225 Жыл бұрын
I had a cranberry red titanium frost two tone GT hatchback from the Deerborn plant. Forged pistons, 5 spd, just an impeccable machine. My uncle George got a notchback in the two tone also same year
@cnnw39293 жыл бұрын
This is a beautiful presentation. I would like to see Ford do the same for the F150!
@joelikespotatoes8321 Жыл бұрын
I got to see where they were assembled, worked like a fine oiled machine and all the workers looked like they were treated well too.
@breakawaymotorsports3 жыл бұрын
Mustangs being hammered together. Cool video.Thanks for posting.
Пікірлер
If at all possible, please upload the kids oriented version with the talking parrot, that is the version i had and it brings back so much nostalgia
America makes nothing anymore.
I like how they say the hats make sure not one stray hair gets on the body, but all her hair is hanging out, 32:54
I had this on VHS as a kid. Watched it many times! Salute to the UAW American men and women making these vehicles. I'm guessing this was filmed mid-late 1990s? (As this is the 4th gen Mustang being made here.)
I thoroughly enjoyed this video
I was too young to save enough money to buy one 😢
My 29435 mileage, never driven in snow and rarely in rain,...2016 S550 Mustang GT has corrosion on the edge of the hood. Ford promised to help when I called ,but they only had me do a online survey and THEY HAVE DONE NOTHING ELSE...so yeah paint quality at Ford isn't
Ford builds excellent vehicles !!!
Well done
I still whistle the music from this.
I own a 2002 F-150 4.6l, September '01 Romeo Engine Plant. I find this very interesting.
I bought a 1990 Mustang 5.0, 5 speed hatchback. The hatch never closed correctly. Something was rolling around blocking the locking latch. The engine races and takes a heck of a time to shift correctly as it races up the rpm as soon as I hit the clutch and disconnect the engine from the tranny. Took it to the dealer several times but to no avail. One time every electrical circuit died. Just died. Waited about 5 minutes and it fired back up. The headlight housing cracked, and I had to use duct tape to hold the light bulb in place. The car was barely tolerable. Certainly lived up to its nickname Found on Roadside Dead. Then having STOOPID tattooed on my forehead i bought a 2017 Ford F250 6.7 diesel in 2018. That actually was the best vehicle I've owned. Was absolutely fautless for the first 41,000 miles. Then a few things needed fixing, but the engine and tranny have been totally reliable. I'm now at 111,000 miles and looking forward to many good miles ahead. Im 63 years old so this maybe the last vehicle i own. So Ford has cracked down on QC and improved their production line. I think all three manufacturers have improved but they wouldn't have done so without the Japanese eating their lunch and taking away their market share.
I bought an 86 GT 5.O brand new and had the opposite experience. The car was a joy to own and I put over 325,000 miles on her. During the course of 25 years there was only one time I could not get the engine to start. I was on a ski trip and it was super cold in VT, say -20F. The car had to be towed to a garage and thawed out. The mechanic said the injectors had "iced over" but I think it was a case of icing in the fuel line. Whatever, one time in 25 years ain't too shabby a track record!!
To be fair, the 79-93 fox platform cars had crap electrical from the factory, it was hit or miss...the 94 and up was greatly improved in both structural rigidity and electrical. I had my 1994 gt which I bought in 2016 and got rid of in 2020 (regrettably) and put over 100,000 miles on it (I drive a lot) never had a major issue, I just replaced original parts when they went bad like the ect sensor, original radiator, original fuel pump, and original rear control arms, and original starter. I owned a 1988 tbird turbocoupe which is basically just a lengthened fox body mustang and it was a great car apart from the crap electric system, if you ever get another 86-93 mustang then get the whole electrical system redone! Or just get a 1994 and up model and dont have to worry about electrical issues
it's crazy to think those Mustangs were made in the same factory right next to each other. They were sent around the U.S. to dealerships and had different owners and almost 30 years later they either wrecked, modded, stock, abandoned, used as parts cars, or someones project car. wild to think
I worked in the DAP in the area where they put the Engine in.Completely different. We would drop the whole body over the Gas Tank Drive Shaft and Muffler with the front resting on Saddles.
Where is the steel from?
Karl Benz was actually the firsr car manufacturer to use the assembly line to build cars in the late 1800's.. Henry Ford improved on it...
Henry Ford didn't invent the assembly line. He did improve on it by having the workers stationary and moving the conveyor belt with the vehicle to the workers who assembled their part, and the vehicle went to another position. Ford also broke down the steps and assembly to the most basic skills so each worker can be dismissed and another take his place with a minimum of training. It was so successful that the rest of the world called it Ford-ism and copied Ford's techniques.
they showed the tires being mounted and installed but they didn't them being spin balanced
these cars were bland the Thunderbird/cougar were better looking cars
I hope my 98 mustang wasmade by the sweet black lady with the glasses
I got to visit the Rouge when they were making Mustang lls in75' during a field
Holy shit, we used to have this on VHS when I was a kid. I watched it over and over and over. Drove my parents crazy. This is amazing, thank you
I still have mine, very interesting, somewhere in the house, but a VHS machine that's another story.
At about 22:30 Kenny G🎷 really starts killing it on the Sax!! Definitely sets the mood
You have to admit, when they brought out basically the entire side of an SN95 Mustang Coupe, minus the doors oc, you were like WTF?? I know I was. After U see it, it makes sense tho
9 Miles of assembly line to complete a mustang gt in 1994, and all in a 1 Mile long factory 🏭 or assembly plant?? Had to watch this being I just bought a 95 GT Coupe, Love It!!!
I STILL HAVE this videotape!!! I had it ever since I got it for Christmas in December 2000!
What a great present😂
I like how there's also a kids version of this same video (and the same production company). But as a kid in the 90s I grew up watching (and rewatching) this version on VHS . The strong narration of Robert Jones and jazz music were a terrific treat of nostalgia.
I remember watching this too. It was one of my favorites. As a child I found the whole thing fascinating. I attribute it to my life long passion for machines and something that led to my current career path. It filled me with so much pride. The kids one was the one with the parrot if I remember right. Watched it many times. Huge nostalgia hit stumbling across this.
Hot chick on thumbnail
I had this on tape when I was in preschool. I watch it over and over. One day we had the opportunity to bring our favorite movie to school. We didn’t watch mine because it wasn’t appropriate for kids my age….
I had this on VHS as a kid and i just randomly thought of seeing if it was on youtube. 🥹
I'm always in awe of the engineering and tool making that goes into all the dies, jigs, and fixtures on the line. Just Imagine the tool rooms in that place. Ok, people, start over, new generation Mustang design coming from the drawings upstairs, and we want the line modernized for better efficiency, so lets get crackin'.
I remember watching the same video as a kid, but narrated by a talking parrot 🦜
It's incredible despite two decades as of when I'm posting this comment I can still vividly remember exactly what you are talking about. Such a huge nostalgia hit.
I work at the Wayne plant making the Bronco and Ranger. So much has changed and yet a lot hasn't either. Its awesome to see how things used to be done 30 years ago.
I have an 04 Cobra dated 1/19/04 3 months before they closed down the Rouge River Plant ( or DAP) on April 1st. Mustangs were continually built there since 1964. The history of the Rogue River plant is amazing. Raw ore went in one end and finished product came out the other. Do a KZread search they are very fascinating.
I just got your DAP ref. Detroit Assembly Plant 🏭 This was cool af, I drive a 95 gt coupe! Spent more on the paint than I did on the🚘
Great video but I like to see the carrent model in detail thank you very much
👍🏿# 212
Nice video!
Awesome video! 👍
The hood is made of plastic? It feels heavy. Or is that the v6 model?
I wonder how much this job pays
They live pretty good at it from what I've heard, thanks in large part to the UAW, whether that's good or bad.
I’m not a Ford fan but it’s cool to see history in the making. That would’ve been cool when they were building the Pontiac GTO. If there was a film documenting their assembly as well.
I gotta get me one of those...
Man, videos like this need to be remastered and upscaled to UHD!!!
I went through River Rouge in early 1979 in the sixth grade. They were still building the Mustang II and hadn't switched over to the Fox body yet. We spent two days there & toured Greenfield Village and the Henry Ford Museum.
I loved my sn95 96 mustang gt I abused it it was a total beast and the 4.6 was so reliable sold it at over 250k miles cause I have two more mustangs and wanted a truck
THose are great engines, also in tbird and crown vic. They live on today (very similar design) in the 6.2 truck motor.
I AM AN OLD SCHOOL FORD GUY, I GREW UP DURING THE 60'S AND 70'S MUSCLE CAR ERA!...MY FIRST MUSTANG WAS A 66 FORD MUSTANG COUPE WHILE IN HIGH SCHOOL AND I FIXED IT UP LIKE A 66 SHELBY GT350 COUPE! AFTER THAT I HAD A 69 MACH 1 MUSTANG WHICH WAS STOLEN!...LATER I OWNED A 85 MERCURY CAPRI RS 5.0L, A 2000 FORD EXPLORER, THEN A 2003 FORD MUSTANG GT/COBRA PROJECT CAR AND CURRENTLY I OWN A 2008 FORD MUSTANG COUPE V6! I AM IN MY 60'S NOW, BUT I AM LOOKING AT DOING A CONVERSION TO MY V6 MUSTANG TO A ELECTRIC POWER, I LIVE IN CALIFORNIA, USING A TESLA MODEL S P100D ELECTRIC MOTOR SWAP! BUT I AM ALSO LOOKING AT THE 2022 SHELBY AMERICAN BUILT SHELBY GT500 KR WIDEBODY WITH 900HP OR THE 2022 SALEEN 302 BLACK LABEL WITH 800HP!...I AM JUST SAYING!...GOD BLESS AMERICA! 😇 BTW!...I AM ALSO LOOKING AT THE 2022 TESLA MODEL X PLAID SUV!....I ALSO MAY WAIT FOR THE SHELBY MACH E GT SUV OR THE NEW HYBRID 2023/24 MUSTANG GT OR SHELBY VERSION!...I AM JUST SAYING!
what year ?
Seems 1994-1995
1995 per date code at 32:34
I love the mustang been a mustang fan ever since I seen the boss mustang back in school I'm a owner of a 2015 ford mustang gt premium an I'll neve sell it ..great video
I just bought a 1996 Mustang SVT Cobra Convertible. It was made at the Deerborn Michigan plant. I’m sure the same workers and this video put my car together. 21-K original miles . It looks drives and smells like a new car. I feel like I just hit the lottery driving my new Mustang.
I bet she’s fast
How is that low km possible?!??
I had a cranberry red titanium frost two tone GT hatchback from the Deerborn plant. Forged pistons, 5 spd, just an impeccable machine. My uncle George got a notchback in the two tone also same year
This is a beautiful presentation. I would like to see Ford do the same for the F150!
I got to see where they were assembled, worked like a fine oiled machine and all the workers looked like they were treated well too.
Mustangs being hammered together. Cool video.Thanks for posting.
Can we scrap them now to make Camaros? Lol