Пікірлер

• 
  @cubdukat4 сағат бұрын

  I’m definitely looking to get one of these. I had the KX-3510 a long time ago, and it was pretty solid. My only concern is if it can handle BASF and other true chromes. I suspect it probably can, but if not, no major; I rarely use true chromes anyway.

• 
  @donaldbollman10498 сағат бұрын

  I have a Troy Bilt Bronco and installed an hour meter when I first bought it. They are ~ $10 on Amazon and pretty easy to install.

• 
  @CybaGirl9 сағат бұрын

  WOW WOW WOW ! Thank you so very much this is awesome and so nice of you to share with other people! I have been struggling of late with dryer boxes and other things to try and get my filament to feed properly and I have always wanted something like this. So thank you so very much once again! I don't suppose you can help me with removing PLA from my Flashforge Adventeruer 3 Lite that has stuck to the bed? I used a razor blade to try and get it off but all that did was destroy my print bed by cutting into the plastic layer . Lucky I had a spare and I tried printing something on the new bed and now that PLA is stuck to it as well. This is also a different filament that I have used in the past without any problems. My bed temp is the standard 50 degrees so I am at a loss now as to what to do as I don't want to waste another printing bed. Thanks !

• 
  @sonnyinaz18 сағат бұрын

  That wos my first CB back in 1974, There's a lil surprise inside of those that few new about because few ever read the manual. There's a built in "dummy load" if you wil, so if you don't have an antenna hooked up to it it won't hurt the radio if you key the mike without it.

• 
  @cajuncoinhunterКүн бұрын

  I remember those used to run just shy of 200 bux .... I like those because you don't have to flip em down anymore after you strike your arc...

• 
  @TheElectronManКүн бұрын

  I know right and now they are full color bigger screen and all that for 25.00 it's amazing...

• 
  @caroleemoreno80862 күн бұрын

  No instructions with this thing. How far in should the steel whip go during assembly? Just down to the lower set screw?

• 
  @TheElectronMan2 күн бұрын

  I know right! I started there but ended finding about an inch before it bottoms out seems to be the sweet spot on mine 20 meters is pretty much flat SWR.

• 
  @user-st2zv2dz6o5 күн бұрын

  I just got Toyota tundra 2006. Can you please tell me what the new radio and adapter I want to do for my truck too

• 
  @TheElectronMan3 күн бұрын

  Great news is any double din radio will fit so sky is the limit I provided a link in the details where you can get the install kit which is the wiring harness adapter and the little side brackets to make it fit nice and clean..

• 
  @cheryla.foster30485 күн бұрын

  Thanks for this video! It was helpful to see your steps repeated and so interesting that the new break wasn't in a glue joint. Hope it held up for you... now off to glue my glass stovetop! Thanks again

• 
  @bubbajones74866 күн бұрын

  You have huge wrists. I had to take 6 links off of mine.

• 
  @dont44506 күн бұрын

  How do you replace the battery that keeps the clock time.?

• 
  @cajuncoinhunter7 күн бұрын

  Those LIL radios come in Handy for a lot of things .... and when they are used on the right frequencies .....

• 
  @DaftyBoi4127 күн бұрын

  I'm so glad you peeled off the monitor protective screen. It gives me anxiaty just watching reviews/box openings where they boot the thing up and leave the protective shipping film ontop of everything ... I can't jump through the screen and peel it, so my blood pressure goes through the roof and I have to switch off and go find a roll of cellotape or something to calm myself down. (I'm joking ofc ... well exagerating .. kind of) xD

• 
  @davideden85697 күн бұрын

  Turn it over and shake it

• 
  @davideden85697 күн бұрын

  Probably started back on the other sswitch

• 
  @thevalleykid9 күн бұрын

  Slap on some 30 inch rear tires and you are GTG

• 
  @user-st2zv2dz6o9 күн бұрын

  Where do you buy adapter? Can you tell me please?

• 
  @TheElectronMan9 күн бұрын

  I bought the adapter kit comes with the wiring adapters and mounts it list Scion but if you look up the kit number it also fits a 2006 Tundra amzn.to/46kKPIr

• 
  @Wrang1510 күн бұрын

  Wish mine would power up. It just up and quit one night. I often wonder if it can be fixed. Was on battery at the time.

• 
  @philliphall519812 күн бұрын

  First thing is to blow out the supply line back into tank, vacuum hose to fuel pump for crack, and back fire valve is clicking ???😊

• 
  @TheElectronMan12 күн бұрын

  Thanks seems this is on going issue with different solutions.

• 
  @foxman36213 күн бұрын

  Nice radio.

• 
  @TheElectronMan12 күн бұрын

  Thanks I love it

• 
  @cajuncoinhunter13 күн бұрын

  I agree with David Carlisle watching the live version was great ...

• 
  @TheElectronMan13 күн бұрын

  @@cajuncoinhunter thank you

• 
  @tomasgabella168713 күн бұрын

  Thanks you so much I had the same issue 🙏

• 
  @TheElectronMan12 күн бұрын

  You're welcome!

• 
  @davidcarlisle338413 күн бұрын

  Watching live 👍😊.

• 
  @TheElectronMan12 күн бұрын

  Thanks for coming

• 
  @owenpederson334p14 күн бұрын

  Nice 😁

• 
  @mekhiwilliams673715 күн бұрын

  I have the same exact one everything works but I get no sound does anyone know a solution? please let me know.

• 
  @TheElectronMan15 күн бұрын

  @mekhiwilliams6737 was your stock radio a premium model if so it's because you have a factory amp that not getting input.

• 
  @mekhiwilliams673715 күн бұрын

  @@TheElectronMan yep sure was a premium

• 
  @mekhiwilliams673715 күн бұрын

  @@TheElectronMan I appreciate the response fr hard to get one. But what does that mean for me now

• 
  @TheElectronMan15 күн бұрын

  @@mekhiwilliams6737 It's a pretty easy fix if you're handy with cutting and splicing a few wires. You just need to wire around the factory car amp. Do a search for "wire around factory car amp" to find some helpful videos. Basically, you need to wire the speakers directly to the new deck. On non-premium models, the speakers are already directly wired since there is no amp. Sometimes, you can still use the factory amp if you can find the inputs to wire it in

• 
  @SullinGonzalez15 күн бұрын

  Compre uno hoy y no veo que esta funcionando

• 
  @scottklaassen559617 күн бұрын

  Life saver..... That was annoying. Is there a way to have Bluetooth and hotspot connected at the same time? Annoying you have to have Bluetooth off to connect it to your phone hotspot to get apps or anything internet related

• 
  @TheElectronMan16 күн бұрын

  @scottklaassen5596 interesting it should work with both I have used Google maps on my cellular data while talking on Bluetooth?

• 
  @robbinhenleyjr17 күн бұрын

  Trying to take this exact model apart and failing hahaha.. Built serious! Any chance you have footage of the disassembly?

• 
  @TheElectronMan17 күн бұрын

  @@robbinhenleyjr no not anymore sorry guess I should have shown that part.

• 
  @cajuncoinhunter17 күн бұрын

  I looked for a video yesterday morning , didn't see it , I do now .... I have never seen a tranny mod like that with 1 diode .... 4 or 5 diodes yes .... I know the guy that donated it to Secret CB books years ago .... I found the file for the cobra 148 Sams I'll send it to you in later this evening ... New meters look great ...

• 
  @TheElectronMan17 күн бұрын

  Thanks yeah I am still trying to figure that mod out to me it really didn't seem to do anything. I am thinking maybe they were trying to up the current on the driver even that is so, it sure was was done in such a sketchy way to say the least.

• 
  @Budro476417 күн бұрын

  @@TheElectronMan The diode mod drops the voltage by .5 or .6 volt depending on the diode in use , 4 diodes in series knocks the voltage down 2 volts or so and keeps the swing ..... I used to put those in radios years ago until Hangnail a local technician came up with the Stinger Mod ....

• 
  @TheElectronMan17 күн бұрын

  @Budro4764 thank you I have been scratching my head on it now it makes sense and I checked output it was down about a half watt but I didn't check the swing. I would have left it had it been done better but bare wires right next to chassis it had to be taken out.

• 
  @jasonsteck510417 күн бұрын

  Can you connect to Bluetooth headphones so you can listen to

• 
  @TheElectronMan12 күн бұрын

  Interesting idea I don't think so, I think this is just for programing.

• 
  @danisfra270618 күн бұрын

  it no longer turns on, help

• 
  @danisfra2706Күн бұрын

  Im serious, i cut a flex

• 
  @jrwingking872119 күн бұрын

  What kinda trailer are you hauling? I thought they said towing too much weight was bad for the transmission. Figure the pin would suffice items light enough for a lawn mower.

• 
  @TheElectronMan19 күн бұрын

  I have a small 5 ft. x 8 ft. Mesh Floor Utility Trailer with a 1 7/8 ball hitch is why I went with the adapter. I use it to move lumber around the property and clean up brush the mower pulls it just fine BTW.

• 
  @FrancisLitanofficialJAPINOY19 күн бұрын

  Same AM in 2 kHz bandwidth with ETON SIDEKICK (AM, FM, NOAA VHF). G4000A / YB 400PE and Eton Elite Executive have AM tuning step switch. Normal FM band for Grundig G4000A and Eton Sidekick. Includes Japanese and Russian OIRT FM band for Eton Executive. 522 - 1620 kHz in 9k step for Eton Executive, in 9 kHz steps from 522 - 1710 kHz on Grudig YB 4000 PE

• 
  @lesjones568419 күн бұрын

  Another junk 😂😂

• 
  @TheElectronMan19 күн бұрын

  One mans junk is another ones treasure...

• 
  @lesjones568419 күн бұрын

  Ham hands 😅😅😅😅

• 
  @lesjones568420 күн бұрын

  Before cell phones 📞

• 
  @lesjones568420 күн бұрын

  Lots of junk 😮😅😅😅😮😢

• 
  @lesjones568420 күн бұрын

  Please 🙏 stop this nonsense please 😢😢😢

• 
  @lesjones568420 күн бұрын

  Solid 😢😢😢😢😢

• 
  @lesjones568420 күн бұрын

  Whistling pig call 😂😂😂

• 
  @lesjones568420 күн бұрын

  Mud duck 🦆 😮😮😮😮😮

• 
  @lesjones568420 күн бұрын

  Your hands are too big 😂😂

• 
  @lesjones568420 күн бұрын

  Polish it up 😅😅😅

• 
  @lesjones568420 күн бұрын

  Ham sandwich to you to 😅😅😅😅

• 
  @lesjones568420 күн бұрын

  You don’t need that part 😂😂

• 
  @lesjones568420 күн бұрын

  Where’s the extra parts 😂😂😂

• 
  @lesjones568420 күн бұрын

  Show us your work station 😢😢😢

• 
  @lesjones568420 күн бұрын

  If that works amen 🙏 😅😅😅

• 
  @lesjones568420 күн бұрын

  You always leave parts off 😂😂

• 
  @lesjones568420 күн бұрын

  You glipped another one 😂😂

• 
  @lesjones568420 күн бұрын

  A poor man who just doesn’t know 😢😢😢